8893/E8

Amount

Excavation in trenches, n. exc. 1.5m wide and n. exc. 1.5m in depth; for laying of cable, n. exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point in soil complete all as specified and directed.

M&L fine sand, filling in trench for cable cushioning and gently punned down by manually with hands complete all as specified and directed.

Material and labour Brick protection cover to LT underground cable with Sub Class 'B' over burnt laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10 mm complete specified and directed

M&L PCC 1:2:4 type B-1 type (using 20 mm graded crushed stone aggregate) as in coping including necessary form work complete all as specified and directed.

M&L PCC 1:3:6 type C-2 type (using 40 mm graded crushed stone aggregate) as in pole/LT panel foundation complete all as specified and directed.

Supply and laying tubes 40 mm dia steel water tube light grade galvanised with all fittings laid in trenches for cable protection complete all as specified and as directed.

M&L for road cutting for laying of LT UG cable through galvanised iron pipe complete including making good the damaged road all as specified and directed.

Supply and laying in trenches or fixing or passing through pipes or fixed to wall/pole 1100 volts grade XLPE insulated armoured heavy duty electric cables (conforming to IS :7098 (Part- I)with aluminium conductor of cross sectional area 10 Sqmm 2 core complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipes or fixed to wall/pole 1100 volts grade XLPE insulated armoured heavy duty electric cables (conforming to IS 7098 (Part- I)with aluminium conductor of cross sectional area 10 Sqmm 4 core complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipes or fixed to wall/pole 1100 volts grade XLPE insulated armoured heavy duty electric cables (conforming to IS 7098 (Part- I)with aluminium conductor of cross sectional area 16 Sqmm 4 core complete all as specified and as directed.

M&L for wiring with two runs of 2.5 sqmm (Nominal area) single core PVC insulated multistranded unsheathed FRLS copper conductor cable upto and including 1100 V grade drawn through and including PVC RIGID CONDUIT with all fittings fixed to pole incl one run of 2.5 sqmm (nominal area) single core, PVC insulated multistranded unsheathed FRLS copper conductor as earth wire complete as specified and directed. (Note :-(i) One run of PVC conduit, two runs of 2.5 sqmm single core cable, one run of 2.5 sqmm earth continuity wire to be measured as one length).

M&L for Steel tubler swaged poles complete with cast iron base plate finial taper plug, bolts, nuts and screws,with two holes for drawing conductor between pole box to street light fitting all as specified type 410 SP-31 of height 9M including painting with two coats of aluminium paint over one coat of primer including Zebra marking with synthetic enamel paint and applying black bituminious paint to the buried surfaces in ground . NOTE: Earth work,PCC will be measured and paid separtely under relevent item of this Schedule.

Supply and fix MS Bracket made of 40mm dia MS pipe medium grade 1.5mtr long suitable for street light on steel / RCC pole as per site requirement including suitable nut,bolt and clamps complete accesseries all as specified and directed .

Supply and fixing of LED street light 120 W IP 66 made up of pressure die cast aluminium housing with toughened glass and high power LED and secondary lenses with system efficency 100 LM/W including all fittings accessories complete all specified and directed. (Make: CG /Havells /Bajaj/philips/Wipro/Jaquar)

Supply and fixing FRP street light box size - 300x200 x125 mm with DIN rail for MCB including 4 Pole PVC connector with all fittings complete all specified and directed. (Sintex /Hensal / RMW)

Supply and fix MCB SP 240V, 6-32 Amps capacity complete all as specified and directed. (Make : Legrand /Schneider/ABB/Siemens/L&T )

M & L earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with the top edge of earth plate at depth not less than 1.5m below ground level connected with 4mm dia GI wire by means of bolts washers and protected by 15mm bore, medium grade GI pipe, funnel with 20mm bore GI medium grade watering pipe, wire mesh, copper lugs including concrete pit in PCC 1:3:6 type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350X350X50 mm, reinforced with 8mm dia deformed bars @15 cm C/C both direction and 10mm MS handle of suitable size, charcoal or coke and salt in alternate layers, necessary earth work in soft/loose soil, all as shown in Electrical Plate No 3 of MES Schedule Part-I and testing, complete all as specified and as directed.

Supply, Install, design, testing and commissoning outdoor floor mounted feeder pillar boxl of suitable size . Panel made of 3.15 mm thick MS CRCA sheet and angle iron structure 40 x 40 x 6 mm, CPRI approved varmin proof compartmentalized , type of size as required including loking arrangement and two coat of powder coated paint over a coat of red oxide primer, fixed in floor with MS angle iron 40 x 40 x 6 mm frame structure and grouted with PCC M-15 (Nominal mix) using 20 mm graded stone aggregate with and including 100 Amps copper bus with porcelin insulator complete all fittings and fixing arrangement with 4.0/2.5 sqmm size FRLS copper wired connection, brass cable gland for cable entry etc. having following accessories :- (a) LED lamps 03 Nos (R, Y, B) - 1 Set (b) Digital Voltmeter 0-500 Volts - 01 No (c) Internal wiring of panel board, metering equipment with suitable size PVC insulated, unsheathed,industrial multistrand copper cable 1100 V grade cable , including provision of lugs/thimbles on either ends of cable. (d) Digital Ammeter - 01 No. (e) Inter connection of MCCBs with bus bar with suitable size copper strip/PVC insulated, unsheathed , multi stranded copper conductor cable, 1100 volts grade. INCOMING :MCCB 63 Amps 4 Pole, 25 KA Braking Capacity- 01 Nos Make: Legrand /Siemens/Schneide/L&T . OUTGOING : (1) MCB TPN 32 Amps - 01 Nos, Make : Legrand /Siemens/Schneider/L&T (2) MCB DP 10 Amps - 02 Nos, Make : Legrand /Siemens/Schneider/L&T (3) MCB SP 10 Amps - 03 Nos, Make : Legrand /Siemens/Schneider/L&T (4) Contactor ML-2 - 01 Nos (5) Digital time switch - 01 Nos Make : L & T/Siemens/ Havells)

M & L for complete removal of existing treatment and preparation of old plastered surfaces of walls and applying two coats of exterior emulsion paint (weather coat) over a coat of alkali resistance primer complete all as specified and directed for work upto 4 th storied.

M & L for complete removal of existing treatment and preparation of old plastered surfaces of walls and applying two coats of exterior emulsion paint (weather coat) over a coat of alkali resistance primer complete all as specified and directed for work from 5 th to 8 th storied.

M&L preparation of old painted steel surface over 10 cm width or girth not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed for work upto 4 th storied.

M&L preparation of old painted steel surface over 10 cm width or girth not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directedfor work from 5 th to 8 th storied.

M/S RAJ CONSTRUCTION AND COMPANY

TOTCO

ARATI TRADING CO

MS HORIZEN

MS JYOTI INDUSTRIES

ARJUN DAS VALECHA

SPECIAL CONCRETE AND CONSTRUCTION CO.

BASU AND CO

M/S L.R.ENTERPRISES

EAST COAST STANDARD PRODUCTS