Repair to all type of wooden and steel furniture, reweaving of charpoy GI Newar and sofa set and painting polishing at Mil Stn Beas and Jandiala Guru under GE Kapurthala

Amount

(A) CHAIR STEEL TUBULAR WITH ARMS Removing of old unserviceable seat of chair and supply & fixing new seat frame made of Ist class hard wood shisham, well seasoned, duly canned in godrej pattern with plastic cane and to be fixed with tubular frame with appropriate size of bolts, nuts and washers including painting the wooden frame with synthetic enamel black paint Ist quality, complete all as specified and directed.

Removing of old unserviceable back seat of chair and supply & fixing new back seat made of Ist class hard wood shisham, well seasoned, duly canned in godrej pattern with plastic cane and to be fixed with tubular frame with appropriate size of bolts, nuts and washers including painting the wooden frame with synthetic enamel black paint Ist quality, complete all as specified and directed.

Removing of old unserviceable arms rest and supply & fixing new arm rest made of Ist class hard wood shisham, well seasoned, including smoothing of external surface with sand paper and painting with synthetic enamel black paint Ist quality , complete all as specified and directed.

Removing of old unserviceable M.S flat iron and supply & fixing MS flat iron of size 490mmx 20mm x 3mm and to be welded with frame under the bottom seat complete all as specified and directed.

Removing of old unserviceable PVC shoe and supply & fixing new PVC shoe to be fixed with appropriate size of bolts/screws with frame under the bottom of chairs complete all as specified and directed.

Material & labour for painting to steel frame complete with a coat of synthetic enamel paint (Olive green) including removing rusts/cracks in the old paint and derusting minor rust spout complete all as specified and directed.

(D) CHAIR STEEL TUBULAR WITHOUT ARMS Removing of old unserviceable seat of chair and supply & fixing new seat made of Ist class hard wood shisham, well seasoned, duly canned in godrej pattern with plastic cane and to be fixed with tubular frame with appropriate size of bolts, nuts and washers including painting the wooden frame with synthetic enamel black paint Ist quality, complete all as specified, shown on drawing complete all as specified and directed.

Removing of old unserviceable back seat of chair and supply & fixing new back seat made of Ist class hard wood shisham, well seasoned, duly canned in godrej pattern with plastic cane and to be fixed with tubular frame with appropriate size of bolts, nuts and washers including painting the wooden frame with synthetic enamel black paint Ist quality, complete all as specified, shown on drawing complete all as specified and directed.

Removing of old unserviceable M.S flat iron and supply of MS flat iron of size 410mm x 20mm x 3mm and to be welded with frame under the bottom seat complete all as specified and directed.

Removing of unserviceable shoe and providing of new PVC shoe of approved quality to the leg of chair complete all as specified and directed.

Material & labour for painting to steel frame complete with a coat of synthetic enamel paint (Olive green) including removing rusts/ cracks in the old paint and derusting minor rust spout complete all as specified and directed.

(E) TABLE DINING STEEL OR’S Removing of old unserviceable top of table & supply & fixing of new top made of 19mm thick commercial block board covered with aluminium sheet 22 gauge all as shown on drawing, complete all as specified and directed.

Removing of old damaged unserviceable leg of table by cutting, supply and fixing of new leg made of square 25mm conduit pipe to be welded continuously including a coat of red oxide primer on new portion /leg complete all complete all as specified and directed. Removing of old unserviceable PVC shoe and supply & fixing of new PVC shoe on the leg of table complete all as specified and directed.

Removing of old unserviceable PVC shoe and supply & fixing of new PVC shoe on the leg of table complete all as specified and directed.

Preparation of external surface with sand paper, removing of black spots and Material and labour painting steel frame complete with synthetic enamelled paint olive green complete all as specified and directed.

(F) TABLE OFFICE OFFICERS STEEL Removing of unserviceable stiffner & supply & welding new stiffner made of 32mm Square MS tube (conduit) of 1.6mm thick, MS sheet complete all as specified shown on drawing complete all as specified and directed.

Removing of unserviceable stiffner and supply and welding new stiffner made of 25mm Square MS tube (conduit) of 1.6mm thick MS sheet of approved manufacturer complete all as specified, shown on drawing complete all as specified and directed.

Removing the unserviceable drawer and supply & fixing new drawer to the table made out of PBI sheet 22 SWG accordingly to the size, shape as shown on drawing including a coat of red oxide primer complete all complete all as specified and directed. Make : TATA/SAIL/IISCO

Removing of old unserviceable lock of table office and supply and fixing of new lock as approved by GE all as specified and as directed by Engineer-in-Charge (Make : Godrej, Link, Harison)

Removing of old unserviceable top of table and supply and fixing of new top made of 19mm thick commercial blcok board duly covered with plastic laminated sheet 0.8mm thick of natural teak shade and shisham wood edging 4mm x 19mm shall be fixed around the table top duly smoothed and polished complete all as specified and directed.

Preparation of surface by removing the scratches etc Material and labour painting the table with paint synthetic enamel olive green on both side internal/ external complete all as specified & shown on drawing.

(J) RACK STEEL ADJUSTABLE -6 TIER Removing the unserviceable Shelf and supply & fixing of new shelve made out of PBI sheet 1mm thick including a coat of red oxide primer complete all as specified, shown on drawings complete all as specified and directed. Make : TATA/SAIL/IISCO

Tightening of the angle frame by supply & fixing new bolts & nuts, wherever required complete all as specified and directed.

Material an labour spraying one coat of Olive Green paint synthetic enameled on inside and outside of rack steel including removal cuts/cracks and de-rusting minor rust, cuts complete all as specified and directed.

(K) TABLE OFFICE CLERK Removing the unserviceable stiffner and supply & welding new stiffner made 32mm Square MS tube (Conduit) of 1.6mm thick MS sheet of approved manufacturer complete all as specified and directed.

All as per Srl item No 25 here-in-before but Stiffener made out of 25mm Square MS tube (Conduit)

Removing old unserviceable top of table and supply & fixing of new top made of 19mm thick commercial block board duly covered with plastic laminated sheet 0.8mm thick of natural teak shade and shisham wood edging 4mm X 19mm shall be fixed around the table top duly smoothed and polished complete all as specified and directed.

Preparation of surface by removing the scratches etc material and labour painting the tablewith paint synthetic enamel olive green on both side internal/ external complete all as specified and directed.

Removing old unserviceable lock of table office and supply & fixing of new lock as approved by GE complete all as specified and directed. Make : GODREJ/LINK/HARRISON

(J) LOCKERS STEEL Removing the unserviceable leg of locker steel and supply & fixing of new leg made out of PBI sheet 1mm thick to be welded continuously including a coat of red oxide primer complete all as specified, shown on drawings complete all as specified and directed.

Removing the unserviceable shutter of locker steel and supply & fixing of new shutter made out of PBI sheet 1 mm thick to be welded with hinges including a coat of red oxide primer complete all as specified, shown on drawing complete all as specified and directed.

Removing the unserviceable hasp and staple and supply & fixing of new hasp & staple aluminium anodized 100mm for steel lockers complete all as specified, shown on drawings complete all as specified and directed.

Removing the unserviceable bow handle and supply & fixing of bow handle mild steel stove enamelled black pressed handles 125mm for steel lockers complete all as specified, shown on drawing complete all as specified and directed.

Removing the unserviceable hanging rod and supply & fixing of new aluminium hanging rod of standard size for steel locker complete all as specified, shown on drg complete all as specified and directed.

Removing the unserviceable hinges and supplying and fixing of new hinges medium weight, mild steel size 75mm to be welded to steel locker complete all as specified, shown on drg complete all as specified and directed.

Material and labour spraying one coat of olive green paint synthetic enamelled on inside and outside of steel lockers including removal cuts/cracks and de-rusting minor rust, cuts of locker steel complete all as specified and directed.

(L) ALMIRAH STEEL LARGE WITH SHELVES Removing the unserviceable leg and supply and fixing new leg made out of PBI sheet 1mm thick to be welded continuously including a coat of red oxide primer complete all as specified, shown on drawing complete all as specified and directed.

Removing the unserviceable shutter of Almirah steel large and supply & fixing new shutter made out of PBI sheet 1 mm thick to be welded with hinges including a coat of red oxide primer complete all as specified, shown on drawing complete all as specified and directed.

Removing the unserviceable lock of Almirah steel large and supply & fixing new lock as approved by GE complete all as specified and directed. Make: HARISON/GODREJ/LINK

Removing the unserviceable handle of Almirah steel large and supply & fixing new handle CP brass as approved by GE complete all as specified and directed.

Removing the unserviceable shelve of Almirah steel large and supply & fixing new shelve made out of PBI sheet 1mm thick including a coat of red oxide primer complete all as specified and directed. Make : TATA/SAIL/IISCO

Material and labour spraying one coat of olive green paint synthetic enamelled on inside and outside of Almirah steel large including removal cuts/cracks and de-rusting minor rust cuts of Almirah steel large complete all as specified and directed.

(M) ALMIRAH STEEL MEDIUM SMALL WITH SHELVES Removing the unserviceable/ leg of Almirah steel medium and supply & fixing new leg made out of PBI sheet 1mm thick to be welded continuously including a coat of red oxide primer complete all as specified, shown on drawing complete all as specified and directed.

Removing the unserviceable lock and supply and fixing new lock of Make HARISON/GODREJ/LINK as approved GE complete all as specified and directed.

Removing the unserviceable shutter of Almirah steel medium and supply & fixing new shutter made out of PBI sheet 1mm thick to be welded with hinges including a coat of red oxide primer complete all as specified, shown on drawing complete all as specified and directed.

Removing the unserviceable handle of Almirah steel medium and supply & fixing new handle C.P. brass as approved by GE complete all as specified and directed.

Removing the unserviceable shelve of Almirah steel medium and supply & fixing new shelve made out of PBI sheet 1mm thick including a coat of red oxide primer complete all as specified and directed.

Spraying one coat of olive green paint synthetic enamelled inside and outside of Almirah steel medium including removal cuts/cracks and de-rusting minor rust cuts of Almirah steel complete all as specified and directed.

(N) TABLE 900X600X760 MM STEEL WITH DRAWER Removing the unserviceable top of the table and S&F new top made out of prelaminated melamine faced particle board 18mm thich natural teak shade (esterior grade) conforming to ISI provide with edging 4mm x 19mm shall be fixed around the table top duly smoothed and polished complete all as specified and directed.

Removing of old unserviceable leg/stiffner and S&F new legs/ stiffener out of 25mm sq tube 1.6 mm thich and fixing in position complete all as specified and directed.

Removing of old unserviceable lock of the table and S&F new locks of make Godrej/ Link/ HARISON complete all as specified and directed.

Material and labour for painting of table with drawer with one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Repair to broken drawer complete all as directed and to entire satisfaction of the Engineer-in-charge.

Material and labour for welding to the table where reqd and exc 2.5cm each complete all as specified and directed.

Material and labour hard rubber shoe of best approved quality complete all as specified and directed.

(O) TABLE 900X600X760 MM STEEL WITHOUT DRAWER Removing the unserviceable top of the table and S&F new top made out of prelaminated melamine faced particle board 18mm thich natural teak shade (esterior grade) conforming to ISI provide with edging 4mm x 19mm shall be fixed around the table top duly smoothed and polished complete all as specified and directed. Make : First Quality of Kitply / Novapan / Green ply / Archid / Bhutan / Dura Board / Chip Board

Removing of old unserviceable leg/stiffner and S&F new legs/ stiffener out of 25mm sq tube 1.6 mm thich and fixing in position complete all as specified and directed.

Material and labour for welding to the table where reqd and exc 2.5cm each complete all as specified and directed.

Material and labour hard rubber shoe of best approved quality complete all as specified and directed.

Material and labour for painting of table without drawer with one coat of synthetic enamel paint over a coat of red oxide primer after preparation of steel surfaces comppete all as specified and directed.

(P) TABLE 900X900X760 MM STEEL Removing the unserviceable top of the table and S&F new top made out of prelaminated melamine faced particle board 18mm thich natural teak shade (esterior grade) conforming to ISI provide with edging 4mm x 19mm shall be fixed around the table top duly smoothed and polished complete all as specified and directed. Make : First quality of Kitply / Novapan / Green ply / Archid / Bhutan / Dura Board / Chip Board

Removing of old unserviceable leg/stiffner and S&F new legs/ stiffener out of 25mm sq tube 1.6 mm thich and fixing in position complete all as specified and directed.

Material and labour for welding to the table where reqd and exc 2.5cm each complete all as specified and directed.

Supply and fixing hard rubber shoe of best approved quality complete all as specified and directed.

Material and labour for painting of table without drawer with one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

(R) RACK SIDE STEEL WITH TRAY Material and labour for welding to rack side steel with tray where reqd n.exc 2.5cm in length complete all as specified and directed.

Removing the unserviceable shelf and supply and fixing new shelve made out of PBI sheet 1mm thick including a coat of red oxide primer complete all as specified and as directed by Engineer-in-charge. Make : TATA / SAIL / IISCO

Material and labour for painting of side rack with one coat of synthetic enamel paint inside and outside including preparation of old painted surface complete all as specified and directed.

Reweaving of Charpoy GI Pipe Reweaving of charpoy GI pipe with nylon newar of approved quality white/light colour/shade shall be off size 50 to 55mm wide, each band shall be closely woven, butting to adjacent band and bands shall not be less than 14/34 and weight of nylon newer shall also be not less than 1.50 Kgs. Weaving shall be carried out in both sides on top and bottom as directed. Work shall be carried out in furniture yard of BSO Kapurthala. (Recycled nylon newer shall not be incorporated in work). FD Drawing No.FD-220. Make : First quality of USHA or equivalent approved by GE

Removing of old unserviceable long rail from the existing GI charpoy frame and supplying & fixing new long rail of size 1980mm long made out of 32mm dia, GI pipe medium grade after threading both ends complete all as specified and directed. Make : TATA/JINDAL/OSWAL/BST/PARKASH /ZEINTH/NIDHI/ADVANCE TUBES/SWASTIK

Removing of old unserviceable short rail from the existing GI charpoy frame and supplying & fixing short rail of size 900mm long made out of GI pipe retrieved from long rail obtained against srl item No 70 here-in-before, after cutting and threading both ends, complete all as specified and directed.

Removing of old unserviceable leg from the existing GI charpoy frame and fixing of leg size 440mm long made out of GI pipe retrieved from long rail obtained against Srl item No 71 here-in-befor after cutting and threading complete all as specified including supply & welding FI clamps 25mmX 3mm for holding the MNF frame & painted black over a coat of red oxide as shown on drg complete all as specified and directed.

Removing of old unserviceable elbow from the existing GI charpoy frame & supply and fixing new elbow 3 way suitable for GI charopoy 32mm dia complete all as specified and directed.

Removing of old unserviceable check nut and supplying & fixing new check nut GI 32mm dia medium grade to the frame of charpoy complete all as specified and directed.

Tighting of GI charpoy loose checknut, elbow, legs whereever required complete all as specified and directed.

Replacement of USV Plywood top of Charpay GI Pipe Supply and fixing plywood BWR type BB of size 2000 mm x 900 mm x 12 mm thick The plywood and existing flat iron shall be fixed to GI pipe with new nut & bolts of size 65 mm x 6mm (three nuts & bolts on each long rail and two nuts & bolts on each short rail ). The gap between GI pipe & plywood shall be filled with plywood 3.5 mm thick 50mm wide as directed due to 3 ways elbow between the plywood and long rail & short rail. Plywood fixed for filling the gap shall be jointed to main plywood with fevicol .Each flat iron shall be fixed to plywood from bottom side with two Nos screws of suitable size and length as approval by GE by drilling holes in flat iron complete all as specified. The exposed surfaces of flat iron shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer including dismantling & taking down old unserviceable plywood complete. Plywood shall be ISI marked and shall be of Make - Duraply / Kitply / Century / Greenply /Archid/Novpan/Bhutan/Mysore/Chip Board.

Supply and fixing MS flat iron of size 40 mm x 4 mm x 900 mm long fixed to GI charpoy frame by drilling holes in flat iron complete all as specified. The exposed surfaces of flat iron shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer.

TABLE DRESSING GENTS WITH MIRROR Removing of old unserviceable top & supply & fixing new top made out of pre-laminated melamine faced particle board 18mm thick natural teak shade (Exterior Grade) conforming to ISI provided with 4mm thick beading of teak wood on edges complete all as specified & as directed by Engineer-in-Charge.

Removing of old unserviceable bottom & supply & fixing new bottom made out of ply wood 18mm thick (BWR) conforming to ISI complete all as specified & as directed by Engineer-in- Charge.

Removing of old unserviceable back & supply & fixing new back made out of plywood 6mm thick (BWR) confirming to ISI complete all as specified & as directed by Engineer-in-Charge.

Removing of old unserviceable ply wood of drawer & supply & fixing new ply wood 4mm thick (BWR) conforming to ISI complete all as specified & as directed by Engineer-in-Charge.

Removing of old unserviceable knob & supply & fixing new M.S. knob 25mm dia dark brown coloured complete all as specified & as directed by Engineer-in-Charge.

Removing of old unserviceable mirror and supply & fixing new looking mirror for table dressing gents (size 30"x15"x5mm) thick electro copper plated duly fixed in existing shisham wood frame and wooden frame shall be french polished complete all as specified and as directed by Engineer-in-charge.

Smoothening of old & new external surfaces with sand paper, removing of black spots and matching of the newly fitted components with original shade by polishing the complete with French polish as approved by Engineer-in-Charge

(C) TABLE DINING FOR SIX PERSONS Removing of the old unserviceable table top and supply & fixing new top made out of 18mm thick pre-laminated melamine faced particle board natural teak shade (Exterior Gde) conforming to ISI including 4mm thick teak wood beading to external edges complete all as specified & as directed by Engineer-in-Charge.

Removing of old unserviceable side long rail and supply & fixing new side long rail made out of shisham wood duly smoothed of size as shown on drawing complete all as specified and as directed by Engineer-in-Charge.

All as per slr item No 86 here in before but side short rail –ditto-

Removing of old unserviceable legs and supply & fixing new legs made out of shisham wood of size & shape as shown on drawing complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing new wooden bracket of shisham wood of size 125x125x25mm fixed with 40mm long screws to legs complete all as specified and as directed by Engineer-in-charge.

Smoothening of external wooden surfaces of table dinning with sand paper, removing of black spots and matching of the newly fitted components with original shade by polishing the complete with two coats of french polish except pre-laminated board as approved by Engineer- in-charge.

(D) TABLE DINING FOR EIGHT PERSONS (FD-273) Removing of old unserviceable top & supply & fixing new top made out of pre-laminated melamine faced particle board 18mm thick natural teak shade (Exterior Grade) conforming to ISI provided with 4mm thick beading of teak wood on edges complete all as specified & as directed by Engineer-in-Charge.

Removing of old unserviceable side long rail and supply & fixing new side long rail made out of shisham wood duly smoothed size & shape as shown on drawing complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No 92 here in before but side short rail –ditto-

Removing of old unserviceable legs and supply & fixing new legs made out of shisham wood of size & shape as shown on drawing complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing new wooden bracket of shisham wood of size 125x125x25mm fixed with 40mm long screws to legs complete all as specified and as directed by Engineer-in-charge.

Smoothening of external wooden surfaces of table dinning with sand paper removing of black spots and matching of the newly fitted components with original shade by polishing the complete with two coats of French polish except pre-laminated board as approved by Engineer-in-Charge.

(F) TABLE 900 x 900 x 760MM (FD-88(M) Removing of old unserviceable top & supply & fixing new top made out of pre-laminated melamine faced particle board 18mm thick natural teak shade (Exterior Grade) conforming to ISI provided with 4mm thick beading of teak wood on edges complete all as specified & as directed by Engineer-in-Charge.

Removing of old unserviceable side rail and supply & fixing new side rail made out of teak wood duly smoothed size & shape as shown on drawing complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing new wooden bracket of teak wood of size 125x125x25mm fixed with 40mm long screws fixed to legs complete all as specified and as directed by Engineer-in-charge.

Removing of old unserviceable legs and supply & fixing new legs made out of teak wood of size & shape as shown on drawing complete all as specified and as directed by Engineer-in-Charge.

Smoothening of external wooden surfaces of table with sand paper, removing of black spots and matching of the newly fitted components with original shade by polishing the complete with two coats of French polish except pre-laminated board as approved by Engineer-in-charge.

(H) TABLE 900X600X760mm WITH DRAWER Removing of old unserviceable leg & supply & fixing new leg made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drawing, as specified and as directed by Engineer-in-Charge.

Removing of old unserviceable frame long rail and supply and fixing new frame long rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg, as specified and as directed by the Engineer-in-Charge

Removing of old unserviceable frame short rail and supply & fixing new short rail made of Ist class hard wood (shisham) duly smoothed, size & shape as shown on drg as specified and as directed by Engineer-in-Charge.

Removing of old unserviceable track side batten of drawer and supply & fixing only new track side batten made of 2nd class soft wood (kail) size and shape as shown on drg as specified and as directed by the Engineer-in-Charge

Removing of old unserviceable top of table and supply & fixing new top made of pre-laminated melamine faced particle board 18mm thick natural teak shade (exterior grade) conforming to ISI provided with edging, 4mmx19mm shall be fixed around the table top duly smoothed and polished complete all as specified and as directed by the Engineer-in-Charge

Removing of old unserviceable knob and supply & fixing new knob 40mm all as specified and as directed by the Engineer-in-Charge

Smoothing of external surfaces with sand paper by removing of black spots and matching the newly fitted components with original shade by polishing complete with French polish as approved by GE.

(J) TABLE 900X600X760mm (WITHOUT DRAWER Removing of old unserviceable leg and supply & fixing new leg made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drawing, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable frame long rail and supply & fixing new longt rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable frame short rail and supply & fixing new frame long rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable top of table and supply & fixing new top made of pre-laminated melamine particle board 18mm thick natural teak shade (exterior grade) conforming to ISI provided with edging of size 19mm x 4mm of teak wood shall be fixed around the table top duly smoothed and French polished complete all as specified and as directed by Engineer-in-Charge

Smoothing of external surfaces with sand paper removing of black spots and matching of the newly fitted components with original shade by polishing complete with French polish as approved by GE (For table 900x600x760mm without drawer)

S&F new wooden bracket of teak wood size 100x100x25mm fixed with 40mm long screws to legs complete all as specified and as directed by Engineer-in-charge.

(K) TABLE WRITING Removing of old unserviceable leg and supply & fixing new leg made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drawing complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable frame long rail and supply & fixing new frame long rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg as specified and as directed by Engineer-in-Charge

Removing of old unserviceable stiffener and supply & fixing new stiffener made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drawing as specified and as directed by Engineer-in-Charge

Removing of old unserviceable top of table and supply & fixing new top made of pre-laminated melamine particle board 18mm thick natural teak shade (exterior grade) conforming to ISI provided with edging of size 19mm x 4mm of teak wood shall be fixed the table top duly smoothed and French polished complete all as specified and as directed by Engineer-in-Charge

Smoothing of external surface of table writing with sand paper by removing of black spots and matching the newly fitted components with original shade by polishing with French polish as approved by GE

(L) CHAIR WOODEN BOTTOM WITHOUT ARMS/BKB Removing of old unserviceable front leg and supply & fixing new front leg made of Ist class hard wood (shisham), size and shape as shown on drawing, complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable rear leg and supply & fixing new rear leg made of Ist class hard wood (shisham) , size and shape as shown on drawing, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable short rail and supply & fixing new short rail made of Ist class hard wood (shisham), size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

All as per serial item No.122 here-in-before but back rail – ditto-

Removing of old unserviceable seat ply & supply and fixing new seat ply wood (BWR) grade 6mm thick fixed with screws all as shown on drg as specified and as directed by Engineer-in-Charge

Smoothing of external surface with sand paper by removing of black spots and matching the newly fitted components with original shade by polishing with French polish as approved by GE (for chair wooden bottom without arms)

(M) BED HARD Removing of old unserviceable long rail of hard bed and supply & fixing new long rail of size 65x50x1980mm/ 100x50x1980mm made out of chir wood complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable short rail of hard bed and assembling bed hard with new short rail of size 100mmx50mmx1980mm/ 65mmx50mmx 900mm by cutting long rail obtained from srl item No.126 here-in-before and providing tenon on both ends of short rail and making joints light proof complete all as specified shown on drawing and as directed by Engineer-in-Charge

Removing of old unserviceable headboard and supply & fixing new head board of deodar wood. Head board shall be covered with 3.5mm thick ply wood teak facing on one side and on the other side complete all as specified, shown on drawing and as directed by Engineer-in-Charge

Removing of old unserviceable footboard & supply and fixing new footboard made of deodar wood. Foot board shall be covered with 3.5mm thick ply wood teak facing on one side and on the other side complete all as specified, shown on drg and as directed by Engineer-in-Charge

Removing of old unserviceable top and supply & fixing new top made out of 12mm thick plywood (both side) fixed on side rail along with four support of chir wood complete all as specified, shown on drg and as directed by Engineer-in-Charge Make : Greenply

Preparation of surface by removing the scratch, dots etc and polishing the bed frame with French polish as approved by GE.

(N) CHAIR DINING CBB Removing of old unserviceable front leg & supply & fixing new front leg made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

All as per description of serial item No.132 here-in-before but rear leg –ditto-

Removing of old unserviceable seat frame & supply & fixing new seat frame bottom made of Ist class hard wood (shisham) duly cane hole size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable front stiffner and supply & fixing new stiffner made of Ist class hard wood (shisham), size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

All as per description of serial item No.135 here-in-before but back stiffner –ditto-

Smoothing of external surface with sand paper by removing of black spot and matching the newly fitted components with original shade by polishing complete with French polish as approved by GE (for chair dinning)

(O) CHAIR WRITING/CLK/BKA Removing of old unserviceable front leg & supply & fixing new front leg made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

All as per description of serial item No.138 here-in-before but rear leg –ditto-

Removing of old unserviceable seat frame & supply & fixing new seat frame bottom made of Ist class hard wood (shisham) duly cane hole size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable front/back stiffner supply & fixing new back stiffner made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable hand rest & supply & fixing new hand rest made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Smoothing of external surface with sand paper by removing of black spot and matching of the newly fitted components with original shade by polishing complete with French polish as approved by GE (for chair writing)

(P) CHAIR EASY/NF Removing of old unserviceable front leg & supply & fixing new front leg made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

All as per description of serial item No.144 here-in-before but rear leg –ditto-

Removing of old unserviceable hand rest & supply & fixing new hand rest made of Ist class hard wood (shisham) size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable seat frame and supply & fixing new seat frame bottom made of Ist class hard wood (shisham) duly cane hole size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable back stiffner, supply & fixing new back stiffner made of Ist class hard wood (shisham) , size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable back side batten & supply & fixing of new batten made of Ist class hard wood (shisham) duly finished, size and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Smoothing of external surface with sand paper by removing of black spot and matching of the newly fitted components with original shade by polishing with French polish as approved by GE (for chair easy)

Supply & replacement cushion of foam size 500 x 525 x 100mm of density 40/32 with cover of cloth tapestry duly stitched, tapestry cloth should not less than 135.00 per mtr Make cool foam/sleep well

Supply & replacement cushion cover size 525 x 575 x 100mm duly stitched from tapestry cloth, tapestry cloth should not be less than 135.00 per mtr of superior quality qas approved by GE

(Q) Table Peg Removing of old unserviceable leg and supply & fixing new leg made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drawing, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable frame short rail and supply & fixing new short rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable frame long rail and supply & fixing new frame long rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable top of table and supply & fixing new top shall be 18mm thick MDF Board duly covered with plastic laminated sheet 1.50mm thick of natural teak shade. Edging of size 19mm x 4mm of teak wood shall be fixed around the table top duly smoothed and French polished complete all as specified and as directed by Engineer-in-Charge

Removing the existing U/S rubber shoes and S&F new rubber shoes of approved make/ quality to Peg Table including appropriate GI screw complete all as specified and as directed by Engineer-in-Charge

Smoothing of external surfaces with sand paper removing of black spots and matching of the newly fitted components with original shade by polishing complete with French polish as approved by GE.

(R) TEAPOY WOODEN Removing of old unserviceable leg and supply & fixing new leg made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drawing, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable frame short rail and supply & fixing new short rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable frame long rail and supply & fixing new frame long rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable top of teapoy and supply & fixing new top shall be 18mm thick MDF Board duly covered with plastic laminated sheet 1.50mm thick of natural teak shade. Edging of size 19mm x 4mm of teak wood shall be fixed around the teapoy top duly smoothed and French polished complete all as specified and as directed by Engineer-in-Charge

Removing the existing U/S rubber shoes and S&F new rubber shoes of approved make/quality to Teapoy including appropriate GI screw complete all as specified and as directed by Engineer-in-Charge

Smoothening of external surfaces with sand paper, removing of black spots and matching of the newly fitted components with original shade by polishing the complete with two coats of french polish as approved by Engineer-in-Charge

(S) TABLE CENTRE Removing of old unserviceable leg and supply & fixing new leg made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drawing, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable frame short rail and supply & fixing new short rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable frame long rail and supply & fixing new frame long rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable top of table and supply & fixing new top shall be 18mm thick MDF Board duly covered with plastic laminated sheet 1.50mm thick of natural teak shade. Edging of size 19mm x 4mm of teak wood shall be fixed around the table top duly smoothed and French polished complete all as specified and as directed by Engineer-in-Charge

Removing the existing U/S rubber shoes and S&F new rubber shoes of approved make/quality to Table Center including appropriate GI screw complete all as specified and as directed by Engineer-in-Charge

Smoothening of external surfaces with sand paper, removing of black spots and matching of the newly fitted components with original shade by polishing the complete with two coats of french polish as approved by Engineer-in-Charge

(T) Table Bed Side Removing of old unserviceable side plank and supply & fixing new side plank made of Ist class seasoned teak wood duly smoothed of size 300x435x18mm and shape as shown on drawing, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable top, bottom & shelf and supply & fixing new top, boom & shelf made of Ist class seasoned teak wood duly smoothed of size 300x380x12mm and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable back & supply & fixing new back made out of ply wood one side teak face 6mm thick confirming to ISI complete all as specified & as directed by Engineer-in-Charge.

Removing of old unserviceable legs & supply & fixing new legs made out of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable stiffener & supply & fixing new stiffener made out of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Smoothening of external surfaces with sand paper, removing of black spots and matching of the newly fitted components with original shade by polishing the complete with two coats of french polish as approved by Engineer-in-Charge

(U) TABLE DRESSING LADIES WITH MIRROR Removing of old unserviceable top & supply & fixing new top with MDF Board 18mm thick duly covered with plastic laminated sheet 1.00mm thick of natural teak shade. Edging of size 19mm x 4mm of teak wood shall be fixed around the table top duly smoothed and French polished complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable bottom & supply & fixing new bottom made out of ply wood one side teak face 18mm thick complete all as specified & as directed by Engineer-in- Charge.

Removing of old unserviceable both sides of table & supply & fixing new sides with MDF Board 12mm thick duly covered with plastic laminated sheet 1.00mm thick of natural teak shade complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable back & supply & fixing new back made out of plywood commercial 6mm thick confirming to ISI complete all as specified & as directed by Engineer-in-Charge.

Removing of old unserviceable ply wood of drawer & supply & fixing new ply wood commercial 4mm thick conforming to ISI complete all as specified & as directed by Engineer-in-Charge.

Removing of old unserviceable knob & supply & fixing new M.S. knob 25mm dia dark brown coloured complete all as specified & as directed by Engineer-in-Charge.

Removing of old unserviceable glass and supply & fixing new sliding glass 4mm thick with aluminum channel, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge.

Removing of old unserviceable mirror and supply & fixing new looking mirror for table dressing gents (size 1220x360x5mm) thick electro copper plated duly fixed in shisham wood frame and back side covered with plywood commercial 4mm thick conforming to ISI, wooden frame shall be French polished complete all as specified and as directed by Engineer-in- charge.

Smoothening of old & new external surfaces with sand paper removing of balck sots and matching of the newly fitted components with original shade by polishing the complete with french polish as approved by Engineer-in-Charge.

(W) TEAPOY VARANDAH Removing of old unserviceable top of Teapoy Varandah and supply & fixing new top shall be 18mm thick MDF Board duly covered with plastic laminated sheet 1.50mm thick of natural teak shade. Edging of size 19mm x 4mm of teak wood shall be fixed around the table top duly smoothed and French polished complete all as specified and as directed by Engineer-in-Charge

Material & Labour for welding to any joint of steel frame of Teapoy as directed by the Engineer-in- Charge

Removing of unserviceable leg & supply & welding new leg made of 18/19mm conduit pipe of 1.6mm wall thickness complete all as specified shown on drawing and as directed by the Engineer-in-Charge.

Removing of old unserviceable M.S flat iron and supply & fixing MS flat iron of size 490mmx 20mm x 3mm and to be welded with frame under the bottom seat complete all as directed by the Engineer-in- Charge

Supply and Fixing for welding support between to legs of Teapoy varandah with 18/19mm conduit pipe of 1.6mm wall thickness 750mm long complete all and as directed by the Engineer-in-Charge.

Removing the existing U/S shoes and S&F new rubber shoes of approved make/quality to Teapoy Varandah complete all as specified and as directed by Engineer-in-Charge

Material & labour for painting to steel frame complete with a coat of synthetic enamel paint (white) including removing rusts/cracks in the old paint and de-rusting minor rust spout complete all as specified and as directed by the Engineer-in-Charge.

(X) TABLE 600 x 600x760mm (FD-95) Removing of old unserviceable top & supply & fixing new top made out of pre-laminated melamine faced particle board 18mm thick natural teak shade (Exterior Grade) conforming to ISI provided with 4mm thick beading of teak wood on edges complete all as specified & as directed by Engineer-in-Charge.

Removing of old unserviceable leg and supply & fixing new leg made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drawing, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable frame long rail and supply & fixing new longt rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Removing of old unserviceable frame short rail and supply & fixing new frame long rail made of Ist class hard wood (shisham) duly smoothed, size and shape as shown on drg complete all as specified and as directed by Engineer-in-Charge

Smoothing of external surfaces with sand paper removing of black spots and matching of the newly fitted components with original shade by polishing complete with French polish as approved by GE (For table 900x600x760mm without drawer)

S&F new wooden bracket of teak wood size 100x100x25mm fixed with 40mm long screws to legs complete all as specified and as directed by Engineer-in-charge.

(Y) RECANNING OF CHAIRS Recanning of different types of steel/wooden chairs I.e. CBA chair, CBBA chair, chair easy, chair dinning, chair writing, bin soiled linen couch CBB chair easy to match couch and stool dressing involving cane work with 2 to 2.5 mm plastic cane for seat and back as applicable and 3mm wide plastic cane for border complete all as per pattern shown on drawing complete all as specified and as directed by Engineer-in-charge. Make of plastic cane: SHAH/PREMIER/PLASTIC. Note : Weight of plastic cane 2mm wide shall be 6gm per 10RM.FD Drawing No. FD-1105, FD-1108,FD-1107,FD-244 &FD-279

Removing old worn out cane plastic of chair varandah and preparing the surface of steel pipe of chair using sand papering and appling two coats of white synthetic enamel paint (1st quality) complete all as shown in drawing as approved by GE. FD Drawing No.FD-19,FD-359 & FD-259

Recanning of chair varandah with plastic cane 4mm wide for seat and back complete all as per pattern shown on drg all as specified and as directed by Engineer-in-charge. Make of plastic cane: SHAH/PREMIER/ PLASTIC FD Drawing No.FD-19, FD-359 &FD-256

Supplying and fixing in replacement PVC shoes for chair verandah complete all as shown or drg, as specified and as directed by Engineer-in-charge.

Sofa Set Removing of old unserviceable front leg & supply & fixing new front leg made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable rear leg & supply & fixing new front leg made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable hand rest & supply & fixing new hand rest made of Ist class hard wood (shisham) duly smoothed of size 730x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable seat frame long rail and supply & fixing new seat frame long rail made of Ist class hard wood (shisham) duly smoothed of size 650x100x35 mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable seat frame long rail and supply & fixing new seat frame long rail made of Ist class hard wood (shisham) duly smoothed of size 1650x100x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable seat frame short rail and supply & fixing new seat frame short rail made of Ist class hard wood (shisham) duly smoothed of size 580x100x350mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable seat frame short rail and supply & fixing new seat frame short rail made of Ist class hard wood (shisham) duly smoothed of size 600x100x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable back frame long rail and supply & fixing new seat frame long rail made of Ist class hard wood (shisham) duly smoothed of size 510x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable back frame long rail and supply & fixing new seat frame long rail made of Ist class hard wood (shisham) duly smoothed of size 1510x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable back frame short rail and supply & fixing new back frame short rail made of Ist class hard wood (shisham) duly smoothed of size 530x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable back frame short rail and supply & fixing new seat frame short rail made of Ist class hard wood (shisham) duly smoothed of size 450x70x35mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable batten for back frame and supply & fixing new batten for back frame made of Ist class hard wood (shisham) duly smoothed of size 500x50x25mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable batten for seat frame and supply & fixing new batten for seat frame made of Ist class hard wood (shisham) duly smoothed of size 580x50x20mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable stiffner for seat supply & fixing new stiffner seat made of Ist class hard wood (shisham) duly smoothed of size 450x40x40mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable stiffner for seat supply & fixing new stiffner seat made of Ist class hard wood (shisham) duly smoothed of size 1510x40x40mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable stiffner for back supply & fixing new stiffner back made of Ist class hard wood (shisham) duly smoothed of size 520x50xc30mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Removing of old unserviceable stiffner for back supply & fixing new stiffner back made of Ist class hard wood (shisham) duly smoothed of size 1510x50x30mm and shape as shown on drg, as specified and as directed by Engineer-in-Charge

Smoothing of external surface of sofa (Single Seated) with sand paper by removing of black spot and matching of the newly fitted components with original shade by polishing complete with two or more coats of French polish as approved by Engineer-in-charge.

Smoothing of external surface of sofa (Three Seated) with sand paper by removing of black spot and matching of the newly fitted components with original shade by polishing complete with two or more coats of French polish as approved by Engineer-in-charge.

Supply only cushion of foam size 500 x 525 x 100mm of density 32 with cover of cloth tapestry duly stitched, tapestry cloth should not be less than 135.00 per mtr Make cool foam/sleep well

Supply of cushion cover size 525 x 575 x 100mm duly stitched from tapestry cloth, tapestry cloth should not be less than 135.00 per mtr of superior quality qas approved by GE

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth and applying one coat of olive green synthetic enamel paint of approved quality for outside of steel Almirah medium with shelf complete all as specified & as directed by the Engineer-in-charge.

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth & matching the colour with Raw/burnt sena & polishing with french polish upto standard quality for Bed Hard/Newar complete all as specified & as directed by the Engineer-in-charge.

All as per Ser No 225 here in before but Bin soiled linen – ditto -

All as per Ser No 225 here in before but Chair Writing – ditto -

All as per Ser No 225 here in before but Chair Dining/CBB – ditto -

All as per Ser No 225 here in before but Chair Easy – ditto -

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth and applying one coat of white synthetic enamel paint of approved quality for Chair Verandah complete all as specified & as directed by the Engineer-in-charge.

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth & matching the colour with raw/burnt sena & polishing with french polish upto standard quality for Hat Stand complete all as specified & as directed by the Engineer-in-charge.

All as per Ser No 231 here in before but Table Peg – ditto -

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth and applying one coat of olive green synthetic enamel paint of approved quality for Ladder for Loft complete all as specified & as directed by the Engineer-in-charge.

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth & matching the colour with raw/burnt sena & polishing with french polish upto standard quality for Side board complete all as specified & as directed by the Engineer-in-charge.

All as per Ser No 234 here in before but Sofa Set 4 to 5 Set – ditto -

All as per Ser No 234 here in before but Stool Dressing – ditto -

All as per Ser No 234 here in before but Table Bed Side – ditto -

All as per Ser No 234 here in before but Table Center – ditto -

All as per Ser No 234 here in before but Table Dining 6 to 8 persons – ditto -

All as per Ser No 234 here in before but Table Dressing Gents with Mirror – ditto -

All as per Ser No 234 here in before but Table Dressing Ladies – ditto -

All as per Ser No 234 here in before but Teapoy Wooden – ditto -

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth and applying one coat of white synthetic enamel paint of approved quality for Teapoy Verandah complete all as specified & as directed by the Engineer-in-charge.

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth and applying one coat of olive green synthetic enamel paint of approved quality for steel Almirah large with shelf complete all as specified & as directed by the Engineer-in-charge.

All as per Ser No 244 here in before but steel Rack adjustable 6 Tier size 1905 x 915 x 310mm – ditto -

All as per Ser No 244 here in before but outside of Table office clerk steel – ditto -

All as per Ser No 244 here in before but outside of Table Officer steel – ditto -

All as per Ser No 244 here in before but outside of side rack with tray steel – ditto -

Preparation of surfaces by removing the scratches spot and dots etc with abrasive and applying one coat of olive green/Grey/Blue Sky synthetic enamel paint of approved quality for Chair steel tubular with & w/o Arms complete all as specified & as directed by the Engineer-in-charge.

All as per Ser No 249 here in before but stool steel 305 x 305 x 510 to 710mm – ditto -

All as per Ser No 249 here in before but Table dinning steel OR – ditto -

All as per Ser No 249 here in before but Locker steel with shelf both internal and external surfaces – ditto -

All as per Ser No 249 here in before but Book shelf open large steel – ditto -

All as per Ser No 249 here in before but Book shelf open small steel – ditto -

Preparation of surfaces by removing the scratches spot and dots etc with abrasive cloth & matching the colour with raw/burnt sena & polishing with french polish upto standard quality for Table 900 x 600 x 760mm wooden complete all as specified & as directed by the Engineer-in-charge.

All as per Ser No 255 here in before but Table 900 x 900 x 760mm wooden – ditto -

All as per Ser No 255 here in before but Chair wooden bottom – ditto -

All as per Ser No 255 here in before but Locker bed side – ditto -

All as per Ser No 255 here in before but Table office clerk wooden – ditto -

All as per Ser No 255 here in before but Table office officers wooden – ditto -

Allied International

KAMAL AGGARWAL

G S Builders