Repairs to flooring, doors, windows, and other miscellaneous works of Labour Tenement at Lumbininagar under manadala maintenance unit, Mumbai.Phase-II

Amount

Abstract Sheet

Part I - Civil Works

Part II - Rebate Items

Description of Work / Item(s)

Amount

Part I - Civil Works

Dismantling & removing of carefully the existing / damaged brick wall / cement plaster / MS windows / wooden doors & frame etc including Necessary propping, shoring and/or underpinning shall be provided to ensure safety of the adjoining work or property before dismantling / demolishing is taken up and the work shall be carried out in such a way that no damage is caused to the adjoining work or property, stacking of the serviceable material and depositing the same to Dept. stores. disposing off the debris outside of the Anushaktinagar or at directed place as dirceted by the Engineer in charge.

Removing carefully Wooden doors & windows

Removing carefully the existing flush door shutters and refixing the same to its position after laying new tiles on flooring including cutting the shutters at bottom portion as per site condition , lipping the cut exposed surface with teak wood lipping including nails, screws,adhesive etc complete all as dierected by the Engineer in charge.

Supplying and injecting with approved quality chemical emulsion at the rates and concentrations as per IS 6313-2001 Part II for post -constructional antitermite treatment and creating a chemical barrier alround the plinth filling, junctions of wall and floor, expansion joints, surrounding of pipes, conduits etc., walls above floor level, apron and drain along the perimeter of the building including all byeworks complete as per specification / IS 6313:2001 or latest revision and direction of Engineer Incharge . Work to be executed by approved agency and specified guarantee for 05 (five) years shall be furnished by the contractor.

Providing & laying machine cut machine polished 25 mm thick Cuddapa stone for door/window cill etc and including necessary cement mortar for backing/ bedding, close jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc, as required including cutting of stone slabs,wastage, making cut outs wherever required etc all as per drg, specifications and as directed by EIC.

a) 25 mm thick machine cut and single side machine polished Cuddapa stone for window cill in stepped form laid over 20 mm thick 1:4 cement mortar & overlapping of 20 mm shall be fixed with Araldite adhesive with best workmanship, including half round moulding & polishing of exposed face etc complete.

b) 25 mm thick machine cut and single side machine polished Cuddapa stone for window jamb & bottom of lintel in single piece laid over 20 mm thick 1:4 cement mortar including half round moulding & polishing of exposed face etc complete.

Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 6nos. of 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge

Second class teak wood

Supplying & fixing in position the following type solid core block board flush door shutters with commercial ply / teak veneer as specified below conforming to IS 2202-latest, with 12 mm thick teak wood lipping alround, fixing shutters in position to existing door frames at all floors by cutting/ planing if necessary including the labour for removing & refixing old fittings & fixtures and for fixing of the fittings & fixtures with wooden packing pieces if necessary with screws, including prepared with two coat of synthetic enamel paint over one coat of approved primer on commercial ply surface etc.including removing existing damaged shutter,fittings and depositing at dept. stores etc. complete all as per specification & as directed by EIC.

a) For Door 35 mm thick commercial ply on both sides

Supplying and fixing heavy duty superior quality SS-304, fittings , fixtures and fasteners along with necessary CP screws, bolts, nuts, washers etc. as per approved samples. etc. complete all as directed by the E-I-C.,

Providing and fixing stainless steel SS-304 aldrops of size 300 X 16mm dia barrel of approved make with necessary screws, bolting from rear side complete as per specifications complete.

Providing and fixing stainless steel pressure quality butt hinges of size 125 x 76 x 03mm of approved make with suitable stainless steel screws etc. complete as directed by the Engineer-in-charge

Providing and fixing of stainless steel "C" type door handles 10 mm dia, 150 mm long SS 304 grade solid rod , of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete.

Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.

Providing and fixing stainless steel tower bolts of size 200 X 12 mm with necessary screws etc.all as per specifications and as per drawings.

Providing and fixing stainless steel Tower bolt 150 X 12 mm long with necessary screws etc.all as per specifications and as per drawings.

Supplying, fabricating and fixing in position at all floors factory made Aluminium sliding/top hung/fixed/ adjustable louvered windows & ventilators with rivit joint of specified size, made of integrated bronze anodised matt finished (15micron thick) aluminium section (extruded) , including for making exhaust fan frame work, handles of specified size etc, of approved manufacutres for following types with extruded sections of Jindal / Indal / Aluminax or other approved equivalent make of approved sections with size and wights as directed for frames and shutters(including wastages if any) confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/glazing clips fixed with necessary bronze anodised screws, grouting the gap with sealant and including dismantling of existing window frame and shutter, glass and depositing same to dept store etc all complete generally as per drawing, specifications etc, all as directed by EIC.

Providing and fixing following thickness of clear float/ frosted / Bajara sheet glass of M/S Triveni/ shree vallabh/ IAG/Modi guard/ Saint Gobin or other approved equivalent manufacture and fixing with Aluminium frame work (door/ window) including fixing aluminium channel beading and providing and fixing 2 way EDPM gasketing to ensure water and air tightness and neoprene cushions/ gasket accommadated in grooves, necessary bronze anodised screws etc, all complete generally as per drawings specifications and as directed by Engineer in Charge

b) 4 mm thick Bajra sheet glass

Providing and fixing fly proof stainless steel 304 grade wire mesh used 27/28 gauge wire in the aluminium sliding door / window and clear story window, using wire gauge with average width of aperture 1.4 mm in both directions including providing and fixing of stainless steel screws and washer at maximum distance of 300 mm complete all as directed by Engineer-In-Charge.

Kotah stone flooring / dado / skirting at all floors & levels using minimum 25 mm thick machine cut machine mirror polished kotah stone slabs laid over cement mortar bedding as specified below, close jointed & pointed with matching slurry of cement, finished to levels, slope or plumb, curing including removing carefully existing damaged/ worm out flooring and dado & disposing off debris with in colony, complete all as per specifications & as directed by the Engineer-in-Charge.

a) In flooring using Ready mix cement mortar 1:4, 20mm thick bedding

b) In dado / skirting laid over Ready mix cement mortar 1:3 backing 12 mm thick

Providing and fabricating and fixing in position structural steel work at all level, using M.S. angles, flats, bars etc. with anchor fasteners of suitable dia in the marble jambs & cills including painting with two coats of synthetic enamel paint of approved shade & make and one coat of approved steel primer, including cutting,fabrication, welding etc complete all as per specification and as directed by the Engineer in charge.

In all soils…

Plain cement concrete using graded stone aggregate of 20 mm max. size including mixing, consolidation, finishing, curing and cost of formwork etc. complete all as per specifications and as directed by the EIC.

Plain cement concrete 1:2:4

Brickwork 230 mm thick using bricks as specified with Ready mix cement mortar 1:6 in In foundation & superstructure including curing, raking out joints above ground level simultaneous pointing below ground level and scaffolding wherever required etc. complete as per specification and as directed by the Engineer in charge.

Cement plastering using factory manufactured pre mix/ready mix mortar in CM 1:4 of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/ 'Soundplast PMC-1' of M/s Sound buildcare pvt.Ltd/ or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied on internal wall and ceiling finished smooth with neeru over brick walls or concrete surfaces at all floors and levels, including membrane curing by applying one coat of factory made curing compound Resikure of M/s Anuvi Chemicals, Dr. Fixit curing compound or other equivalent over repaired surfaces as per manufacturer's specification, including scaffolding and removing existing damaged/ worn out plastering and disposing off debris out side colony etc. complete all as per specifications and as directed by EIC.

15 mm thick

Sand faced cement plaster 20 mm thick in 2 coats over exterior masonary and concrete surfaces with base coat in cement mortar 1:4, 12 mm thick and finishing coat in cement moratar 1:3, 8 mm thick final rendering , double / single scaffolding wherever required necessary, curing etc. complete and addition of waterproofing compound for the base coat etc at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces.including removing loose bricks & putting new bricks with C.M. 1:4 wherever required including removing existing damaged/ worn out plastering and disposing off debris outside society etc. complete.

Providing & fixing asbestos cement corrugated / semi- corrugated sheets, 6 mm thick in roofing including all over-laps mitring, supplying and fixing necessary 'J' or 'L' hooks, bolts, nuts and bituminous and G.I. Washers as per manufacturers code of practice and cutting the asbestos sheets as required, scaffolding, etc. including removing existing damaged, asbestos cement sheet and disposing off debris within colony etc. complete all as per specifications & as directed by the Engineer-in-Charge.

Reinforcement with TMT bars of Fe500D grade reinforced cement concrete conforming to IS at all floors & levels including, supplying, cutting, bending, fixing and tying in position with 1.6 mm dia soft drawn annealed binding wire including cost of binding wire, labour and welding of new reinforcement bars with existing reinforcement bars wherever required etc. complete all as per specifications and as directed by the Engineer-in-Charge. Note:- Binding wire required for the work will have to be supplied by the contractor & the same will not be measured for payment.

Providing & laying Reinforced cement concrete of grade 1:1.5:3 using graded stone aggregate of 20mm max. size including mechanical mixing, placing , vibration, consolidation, finishing, curing, providing & filling expansion joints wherever necessary etc.all Complete at all floors and heights / levels, in beams / RCC chambers etc as specified as per drawings , specifications and as directed by Engineer-in-charge. (Note: excluding cost of form work, shuttering & steel reinforcement which shall be paid in the relevent item)

Providing centring shuttering Form work using PVC film faced plywood to get neat form finish surface (F-3) for Walls, partitions, paradi , RCC bands including strutting, proping, staging, support etc. and deshuttring after the specified time all as per drawings, specifications and as directed by the Engineer-in-Charge.

Repainting of old painted surfaces with two coats of synthetic oil bound distemper (on already prepared surface/ old similar painted surface) of Tractor brand of M/s. Asian/Bison Acrylic Distemper of M/s. Berger/Beauty O B D of M/s. Nerolac/Maxilite Acrylic Distemper of M/s. ICI or other approved quivalent make of approved shade/ colour, with/without one coat of approved cement primer, including covering the furniture etc with tarpaulins or eqivalent covering materials before applying, scaffolding, removal of splashing & droppings from floors, doors & windows, cleaning the surfaces etc. complete all as per specifications and as directed by the Engineer-in-Charge.

a) Two coats of synthetic oil bound distemper over one coat of approved cement primer

Providing and applying three finished coats of acrylic based emulsion exterior coating of Apex Ultima of M/s. Asian Paints / Excel of M/s. Nerolac / Heatshield of M/s. Dr.FIXIT / Weathershield Max of M/s. ICI Delux or other approved equivalent make and shade over the sand face / rough cast plaster/ RCC jalli / RCC fins at locations as required, including preparation in proportion of One litre of Apex Ultima or other makes with 400 ML. of potable water, thoroughly mixed and applied at an interval of 4-6 hours for each successive coats and ensure consumption of 0.27 ltr/Sqm for 3 coats, including preparation of surface, cleaning and filling the cracks and crevices with Latex caulking crack filler etc. complete generally as per the manufacturer's specification and as directed by the EIC. Over sand faced plastered surfaces / RCC Jalli / fins

a) Two coats of acrylic emulsion paint over one coat of approved cement primer

Painting old steel/wood work with two coats of synthetic enamel paint of approved shade and make over one coat of primer including preparing surfaces, filling with putty wherever required and cleaning etc. complete all as per specifications and as directed by the EIC.

a) On wooden surfaces with two finishing coat over a coat of wood primer

Description of Work / Item(s)

Amount

Part II - Rebate Items

Rebate for Taking away dismantled item by the contractor

a) Teak wood frame

b) Panelled door shutters 32mm thick (approx)

MARC CONSTRUCTION

vijay construction

MARC CONSTRUCTION

vijay construction

AMBIKA ENTERPRISE

MARC CONSTRUCTION