Loading
Loading…
Loading…
Tender Value
₹73.8 L
EMD Value
₹1.5 L
Closing Date
30 Jan 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Definition of Similar Nature of Work: Works of wiring/cabling or installation and commissioning of electrical items (other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc., (with or without supply of items /equipment's) for 230 Volts, 1 phase or 415V, 3 phase system or higher voltages.
26 conditions · 2 needing a document upload
Uploading of Scanned copy of Statement of Bank details, PAN & GST.
Compliance with Public Procurement (Preference to Make in India) Policy: This tender complies with Public Procurement (Preference to Make in India), Order 2017-Revision dated 19.07.2024 of Department of Promotion of Industry and Internal Trade, Ministry of Commerce and Industry, Govt. of India (herein referred to as PP-PIM), circulated vide Ministry of Railways (Railway Board)'s letter No.2020/RS(G)/779/2/Pt.1 (E3322671) dated 20.08.2024, and all its amendments. Only Class-I local suppliers (as defined in PP-PIM) shall be eligible to bid for list of items specified in Ministry of Railways (Railway Board)'s letter no.2025/RS(G)/779/3 (E3488356) dated 02.05.2025. For other items, only Class-I and Class-II local suppliers are eligible to bid. At the time of bidding, each bidder is required to indicate percentage of local content (as defined in PP-PIM) and provide self-certification that the item offered meets the local content requirement for "Class-I local supplier"/"Class-II local supplier", as the case may be. If this self-certification is not submitted, the bid will be summarily rejected. For contracts above Rs.10 crores, the provisions of Para 9(c) of PP-PIM shall be additionally applicable. For the purposes of this NIT, the "local content" (as defined in PP-PIM) requirement to categorize a supplier as "Class-I local supplier" is minimum 50% and for "Class-II local supplier" is minimum 20%. Also, the Margin of Purchase Preference (as defined in PP-PIM) is 20%. The procedure for preference to Make in India shall be as specified in PP-PIM. Uploading of self-certificate for meeting the local content requirement for "Class-I local supplier"/"Class-II local supplier", as the case may be (proforma attached). Non-submission of this certificate will lead to summary rejection of bid. ( Click here to download Format)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Strengthening of incoming power supply and Re-wiring of staff Qtrs VRC/MYS Type - III : 16 nos., Type - II : 14 nos. and NTW Type - II : 17 nos., Total - 47 nos.
Y-E-29-2025-26-75~SWR
Y-E-29-2025-26-75
Open
Works - General
180 Days
Dharwad, Karnataka
₹0
₹1.5 L
30 Jan 2026
8 Jan 2026
16 Jan 2026
55 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 73,83,128.65 | ||
| — | 6000.00 | — | — | ||
| Excavation of cable trench, 450 mm. wide and 1000 mm. deep in all types of soil and refilling the cable trench to original shape by excavated soil free from unwanted materials. | — | — | — | 10,08,000 | |
| — | 2500.00 | — | — | ||
| Laying of 4 x 16 - 35 Sq mm LTUG cable with aluminium conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc. | — | — | — | 24,250 | |
| — | 3500.00 | — | — | ||
| Laying of 4 x 50 - 240 Sq mm LTUG cable with aluminium conductor including end terminations at both ends. This work includes Extension of power supply from the nearest power supply source in the excavated cable trench/in trough/on building walls/sheds/shelters etc. | — | — | — | 68,985 | |
| — | 2200.00 | — | — | ||
| Supply and laying of 75 mm Diameter PE 80 HDPE, PN 4 Pipe for Water Supply (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687709475273 dt.17/09/2024) and all the ends should be sealing with bituminous compound. | — | — | — | 2,50,888 | |
| — | 120.00 | — | — | ||
| Supply and Fixing of GI pipe 'B' class of dia 50 mm. for cable rising & protection including clamping, fixing arrangements and sealing with bituminous compound. | — | — | — | 91,129.2 | |
| — | 47.00 | — | — | ||
| Supply and fixing of 1 phase KWH meter box of suitable size with double door and with viewing MC with Type 2 AC SPD 1P+N Imax 40 KA - 1 no, SPN MCB 6-32 A 10 kA C series - 1 no with all other accessories complete. (KWH meter will be supplied by Railways). | — | — | — | 2,69,075 | |
| — | 1000.00 | — | — | ||
| Wiring for circuit/ submain wiring along with earth wire with the 2 X 6 sq. mm + 1 X 6 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable in surface / concealed medium class PVC conduit / casing & capping as required. | — | — | — | 4,39,000 | |
| — | 2500.00 | — | — | ||
| Wiring for circuit/ submain wiring along with earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable in surface / concealed medium class PVC conduit / casing & capping as required. | — | — | — | 8,35,000 | |
| — | 3000.00 | — | — | ||
| Wiring for circuit/ submain wiring along with earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLSH PVC insulated copper conductor, single core cable in surface / concealed medium class PVC conduit / casing & capping as required. | — | — | — | 8,25,000 | |
| — | 500.00 | — | — | ||
| Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH PVC insulated copper conductor single core cable in surface / concealed medium class PVC conduit / casing & capping, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLSH PVC insulated copper conductor single core cable etc. as required. | — | — | — | 4,24,420 | |
| — | 235.00 | — | — | ||
| Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 5/6 A modular socket outlet and 5/6 A separate modular switch, connections etc. as required. | — | — | — | 1,05,223.6 | |
| — | 188.00 | — | — | ||
| Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 pin 15/16 A modular socket outlet and 15/16 A separate modular switch, connections etc. as required. | — | — | — | 1,03,415.04 | |
| — | 20.00 | — | — | ||
| L.T. Earthing arrangements for hard soil using 50 mm C-Class GI Pipe- 2.7 Mtr length, soil treatment by spreading of 25 kgs each of salt and charcoal, duly painting earth pit with black paint and stenciling of earth resistance value with date, including supply and laying of 6 SWG G.I. wire and other hardware to connect equipment at site complete. | — | — | — | 1,02,235.2 | |
| — | 15.00 | — | — | ||
| Supply, erection, commissioning and testing of tubular G.I post 6 meter long, including foundation work, complete with light bracket suitable for illumination on platform / road side with loop in loop out box with SMC connector and 0.5 A MCB as per detailed specification. | — | — | — | 2,33,669.1 | |
| — | 50.00 | — | — | ||
| Supply, erection, testing and commissioning of 45-Watt, 230 Volt AC, 50 Hz, IP66 LED street light fitting along with lamp, driver with all connected materials for proper fixing and alignment conforming to specification No. SWR /LED LIGHT FITTING (Indoor /Outdoor)/011-2016 dt 18.04.16. | — | — | — | 1,31,120.5 | |
| — | 120.00 | — | — | ||
| Wiring to street light fittings mounted on tubular light pole from cable loop in loop out box up to control gear box and light fitting with 3 core of 1.5 sq.mm PVC insulated flexible Copper wire taken through hollow portion of lamp post duly providing rubber grommets and sleeving at entry point to pipe. | — | — | — | 17,280 | |
| — | 55.00 | — | — | ||
| Supply and fixing of 5 star rated 1200 mm sweep BLDC ceiling fan with suitable electronic regulator / remote, fan hooks with all necessary accessories as per specification. | — | — | — | 1,58,708.55 | |
| — | 50.00 | — | — | ||
| Supply, fixing, testing and commissioning of 200 mm size BLDC Ventilating fan with all other necessary accessories complete. | — | — | — | 87,580.5 | |
| — | 250.00 | — | — | ||
| Supply, fixing, testing and commissioning of 22-watt 6500 k batten 4 feet Approx length LED lighting fixture as per specification SWR/LED LIGHT FITTING (Indoor/outdoor)/001-2016 effective from 18.04.2016 or latest. | — | — | — | 57,987.5 | |
| — | 200.00 | — | — | ||
| Supply, fixing, testing and commissioning of 10-watt 6500k batten, 2 feet Approx length LED lighting fixture as per specification SWR/LED LIGHT FITTING(Indoor/outdoor)/001-2016 effective from 18.04.2016 or latest. | — | — | — | 35,648 | |
| — | 50.00 | — | — | ||
| Supply of RCC cable markers. The lettering on the cable marker shall be "ELEC"/''LTUG''/''HTUG'' as per the instructions of Railway representative at site. | — | — | — | 13,001 | |
| — | 50.00 | — | — | ||
| Digging of pit to a depth of 800 mm of size 300mmX300mm, casting of concrete foundation of size 300mmX300mm300mm and placing of RCC cable markers on top of the foundation and refilling the pit and consolidating it by ramming. The cable markers shall be provided at an interval of 20 meters. | — | — | — | 9,481 | |
| — | 55.00 | — | — | ||
| Supply, installation, testing and commissioning of Electric Geyser 25 LTRS, Vitreous enameled inner tank confirming to IS: 13273, Provision of Pressure Safety Relief Valve (As per Clause 22:103 of IS302-2-21:2018), Warranty period for 3 years, BEE Star Rating - 5. Including suitable hot water pipes and all other required hardware items complete. | — | — | — | 4,07,715 | |
| — | 500.00 | — | — | ||
| Platform surface/concrete/Road cutting for excavation of cable trench 300 mm wide x 300 deep, re-fitting of soil and re-plastering of excavated trench with cement on the PFs to bring original shape. | — | — | — | 3,32,055 | |
| — | 47.00 | — | — | ||
| Design, Supply, fixing and commissioning of 12 Way SPN Double Door Distribution Board with following switchgears (All 'C' Series) incomer 40 A SPN RCBO sensitivity 30 mA-1 No's and outgoing SP MCB 6-32A 10 Ka - 10 No's with required suitable hardware and internal wiring complete. | — | — | — | 4,75,998.61 | |
| — | 60.00 | — | — | ||
| Supply, fixing and commissioning of 8 Way Double Door SPN MCB Distribution Board with following switchgears (All 'C' Series) SPN RCBO 25 A with Sensitivity 100 ma- 1 no, SP MCB-16 A-1- 1 no, SP MCB 10A-4 Nos along with 1 No. 1P+N SPD with required suitable hardware and internal wiring complete. | — | — | — | 7,74,096.6 | |
| — | 47.00 | — | — | ||
| Additions/alterations of interconnectivity of power supply, LTUG Cables for outgoing Feeders at LT panel board, fixing and mounting work etc. Shifting of old panels (the tenderer shall consult and obtain permission from Railway Engineers before commencement of work each step/occasion). | — | — | — | 1,02,166.25 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .