CONSTRUCTION OF ROOMS AT GHPS SCHOOL AT CHILAKAMUKHI VILLAGE IN KOPPAL TALUKA

SUB ESTIMATE FOR DEMOLITION OF CLASS ROOM

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

CONSTRUCTION OF SCHOOL BUILDING

Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing and laying In position Cement Concrete for levelling course for all works in foundation all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Additional for Form work centering and Scaffoldig for Sl No 1 a Foundation upto plinth Isolated As Per Appendix I in Vol 1

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Additional for Form work centering and scaffolding for Sl N 12 Beam and lintels

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Additional for formwork centering and scaffolding for Sl No 8 Column and piers As per Appendix I

Additional for formwork centering and scaffolding for Sl No 20 Chejjas Canopy and Other Arichitectural Projections of minor sections As per Appendix

Additional for formwork centering and scaffolding for Sl No 12 and 13 beam lintels and roof

Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/we...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

Electrical Works

upplying heavy gauge PVC conduit pipe . dia . mm thick

confirming to IS 2509 with suitable size bends, junction boxes,

adhesive paste etc , and fixing using inverted wood plugs in case of

RCC ceiling ...

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick

with suitable size bends, metal junction boxes adhesive paste etc., by

groove cutting in the wall and fixing by bracing U or J hooks and

Supplying and fixing superior quality modular switch mounting

polycarbonate plate with necessary supporting back plate with required

nos. of machine screws, bolts nuts etc., complete on the existing

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &

1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to...

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &

1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to...

Supplying and flush mounting teak wooden box without front plank,

made of not less than 12 mm thick wood, after due groove cutting,

finishing with necessary cement plastering complete.12" x 12" x 3" (...

Supplying and wiring adopting loop system in existing PVC

Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &

1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated

copper wire (confirming to...

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated

1100V grade, multistrand copper wire with low conductor resistance

single core in open or concealed system of wiring with specified IS...

Supplying 4mm thick plastic sheet with necessary nitches for

fixing switches, regulators etc, and fixing on existing wooden or

metal box using N.F. screws

Supplying 6A flush type socket and 6 A flush type SP switch either

surface/flush mounting in existing gang box or in 4mm thick plastic

sheet and fixing over a flush mounted wooden box and wiring using...

Supplying and fixing surface/flush mounting unbreakable PVC

modular box suitable for mounting modular switch plates with due

groove cutting in Brick/C.C wall, including necessary rawl plugs,

Supplying And fixing/replacing of 6/16/32A electrical

accessories on existing switch board.6A SP Switch

Supplying and fixing of slim box fitting, made out of CRCA Sheet

metal body with locking type holder completely wired. Excluding

Ballast & Fluorescent Tube.1 x 4' Tube light fitting.

Supplying and fixing regular MCB distribution boards on wall/ood

board / flush mounting using required clamps, bolts, nuts etc., with

provision for fixing suitable type capacity MCB's single phase/3

Supplying capacitor type ceiling fan complete with down rod blades,

shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase

AC supply conforming to ISS-374- 1979 and with double ball be...

Fixing all types and all capacities of fluorescent /false ceiling / spot

light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders

using 23/0.0076" twin twisted PVC insulated wires, r...

Fixing a ceiling / Wall mounting fan of all capacities and all types to

the existing 'S'' hook with fan regulator to the existing board together

with supplying and fixing 5 A. ceiling rose, necessary ...