REPAIRS TO JOINERY, FLOORING, ROOFS, PLASTERING AND PLUMBING ETC IN ZONE A AT DAMANA UNDER GE JAMMU

Amount

Taking down chowkats or frames with shutter without taking off shutter from the frame n.exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) all as specified and directed.

Taking down chowkats or frames with shutter without taking off shutter from the frame exc 1.5 sqm but n.exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) all as specified and directed.

Taking down shutters only of any description exceeding 1sqm but not exceeding 2sqm each complete all as specified and as directed by the Engineer in Charge.

Demolition of cement concrete (unreinforced) in ground floors and paving's n.exc 15 cm thickness (below or above ground level) and removing unserviceable material exc 100 mtr all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and as directed by the Engineer in Charge.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches pillars etc and removing unserviceable material exc 100 mtr all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including racking out joints hacking for key scrubbing with water etc all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section in framed work, in any position all as specified and as directed.

Dismanting asbestos cement (corrugated or semicorrugated etc) sheets in roof covering all as specified and as directed.

Dismantling ceilling boarding of any type and description including cover fillets all as specified and as directed.

Dismantling floors hearth or wall tilling including cement mortor bedding (but not backing) removing serviceble tiles to store and rubbish off the premises all as specified and as directed.

Takind down GI tubing of 15 mm dia and connection and including cleaning for refixing or removal all as specified and as directed.

Takind down GI tubing of 20 mm dia and connection and including cleaning for refixing or removal all as specified and as directed.

Dismantling/disconnecting/demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) exc 250 and n.exc 500 Ltrs capacity and removing from site or refixing in position all as specified and as directed.

Dismantling/disconnecting/demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) exc 500 and n.exc 1000 Ltrs capacity and removing from site or refixing in position all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) exc 250 and n.exc 500 Ltrs capacity Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) exc 500 and n.exc 1000 Ltrs capacity. Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc all as specified and as directed.

Taking out the root of trees/stirrups of any girth from the surface of buildings and making good the damaged portion to match with the existing surface in CM (1:3) or with PCC (1:2:4) or BB work in CM (1:4) and finally finishing the surfaces to match with the existing surfaces all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and as directed by the Engineer in Charge.

Pressed steel frames for door (Factory made) out of 1.25 mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete, size of frame 105x60mm including bottom of each chowkat to be welded with 2 Nos 25x25x3 mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate including one shop coat of red oxide primer complete all as specified and directed. Note:- PCC 1:3:6 type C-0 using 12.50 mm graded crushed aggregate as in back fill shall be measured and paid separately.

Pressed steel frames for door (Factory made) out of 1.25 mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate, etc. complete, size of frame 125x60mm including bottom of each chowkat to be welded with 2 Nos 25x25x3 mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate including one shop coat of red oxide primer complete all as specified and directed. Note:- PCC 1:3:6 type C-0 using 12.50 mm graded crushed aggregate as in back fill shall be measured and paid separately.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing and as per sample kept in office of GE Jammu all as specified and as directed.

S&F solid PVC factory made door frame of size 50x47 mm made out of 5 mm wood grain printed PVC sheet and edge will be painted to match with printed sheet, reinforced with MS square tube complete all as specified and directed by the Engineer-in-Charge.

S&F 35mm thick 2nd class hard wood factory made shutters plain , framed, panelled (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (part-1), kiln seasoned and chemically pressure treated all as specified and as directed.

S&F for 35 mm thick 2nd class hard wood factory made glazed and Skelton shutters open rebated and prepared to receive glass/wire gauge etc. without sash bar but with lock rail edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/wire mesh etc sizes of member as per clause 8.20(a) of SSR part -I for door shutter complete all as specified and as directed.

M&L for 18/19 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work as in cupboard shutter,shelves/pelmet box including teak wood beading all around all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR Part -II and as per sample kept in office of AGE B/R 'A' Jammu all as specified and as directed.

S&F factory made (with particle board core) solid PVC moulded door shutter 28 to30 mm thick (Style) with 2, 4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet polyethane pained on the front face and 2 mm plain white colour PVC sheet on back face fixing in frame with wood free EPS complete all as specified and as directed.

Refixing Shutter of any description exc . 1 sqm and n. exc. 2 sqm each in the same opening all as specified and as directed.

S&F steel window 1.25 mm thick Box type (primer coated) ERW hollow P section of size 60 mm x 25 mm single rebated comprises glazed skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos sash bar of T- section 20 mm x 3 mm complete welded to frame with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window including following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07 all as specified and as directed.

S&F steel window 1.25 mm thick Box type (primer coated) ERW hollow P section of size 60 mm x 25 mm single rebated comprises wire gauged skelton shutter ERW sec 50 mm x 20 mm and 1 mm thick with two Nos of FI section complete welded to frame for holding wire mesh with one vertical mullion of ERW box type T- section of size 60 mm x 25 mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 four No for each window including following fitting welded to frame shutter hold fast of 150 mm long of 12 mm x 3 mm FI made to shape 4 No, handle of Z section 20 mm x 25 mm x 100 mm long 1 No per leaf, MS tower bolt 150 mm long 2 No per leaf, Z sec 20 mm x 25 mm, 100 mm long stopper 1 No on per leaf, MS Pintal hinges of size 75 mm x 12 mm 2 No per leaf fabrication and fixing arrangement as per drg No CEPZ/TD-324,325/07 all as specified and as directed.

S&F Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc including bending, cutting and welding as necessary of confirming to Gde Fe 290-0 including one shop coat of red oxide primer all as specified and as directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanized wire staples all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality glazing with steel pins, oil putty to steel windows and beads, nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, all as specified and as directed.

S&F 3 mm thick figured glass, frosted head type and glazing with oil putty in square n.exc 0.5 sqm in each pane all as specified and as directed.

S&F butt hinges 100mm long extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F aluminium anodized barrel tower bolt 150 mm long of extruded section complete all as specified and as directed.

S&F aluminium anodized handle fabricated 'D' type 150mm long complete all as specified and as directed.

S&F Mild steel helical/ordinary rat tail rod pattern door spring 300 mm including roller and roller plate complete fixed with welding all as specified and as directed (ISI marked).

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified and as directed.

S&F 100 mm long hasp and staple, aluminium anodised with bolt to hinge palte and fixed with screws all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in blocks for hold fasts,lintels upto 1.5m clear span, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and directed. Note: Form work required for these items included in the unit rate of this item.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in floor/pavings finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangulament) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors, over 15 mm thick screed in CM 1:6 set and jointed in neat cement slurry and pointed in white/coloured cement with pigment to match all as specified and as directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangulament) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors, over 15 mm thick screed in CM 1:6 set and jointed in neat cement slurry and pointed in white/coloured cement with pigment to match all as specified and as directed.

M&L for vitrified ceramic light shade coloured tiles 10 mm thick square/rectangular area of each tile n.exc. 36 sqm in floor etc and jointed in neat cement slurry and pointed in white cement with pigment to match the surface including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for vitrified ceramic light shade coloured tiles 10 mm thick square/rectangular area of each tile n.exc. 36 sqm on skirting, dado set and jointed in neat cement slurry and pointed in white cement with pigment to match the surface over 10 mm thick screed in CM 1:6 all as specified and as directed.

M&L glazed ceramic coloured tiles 350x 250x 7 mm/ 450X 350X 7mm thick on skirting, dado set and jointed in neat cement slurry and pointed in white cement with pigment to match the surface over 10 mm thick screed in CM 1:6 all as specified and as directed.

M&L for Green Marble work 18 to 20 mm thick (table rubbed and polished) in stapes jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick laid over cement screed base 20 mm thick in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing to granite finish complete all as specified and directed.

M&L for machine cut kota stone slab 18-20 mm thick as in riser of steps, skirting, dado and pillar laid over cement screed bed of 15 mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting as required, rubbing and polishing to granite finish complete all as specified and directed.

M&L for Granite 20mm thick table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade of Makrana white complete all as specified and as directed by the Engineer in Charge.

M & L Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed by the Engineer in Charge.

Factory made coloured precast designer tile (interlocking tile) top layer glazed made with white cement & pigment and the base in grey cement of thickness 22 to 25 mm thickness in different colour and pattern (compressive strength not less than 250 Kg/Sqm) as approved by GE, set in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over 15 mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and as directed.

M&L for Brick work in cement mortar 1:6 using sub class "B" bricks straight or curved on plan exceeding 6m mean radius complete all as specified and as directed by the Engineer in Charge.

M&L for brick work with sub class "B" bricks built in CM 1:4 straight or curved on plan to any radius in half brick thick walls complete all as specified and as directed by the Engineer in Charge.

M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick work surfaces finished even and smooth with out using extra cement all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 on fair face of brick work surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 5 mm thick cement plaster 1:3 on fair faces of concrete surfaces as in ceiling, chajja, shelves etc. finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 15 mm thick cement plaster 1:3 on other then fair faces of concrete surfaces as on facia of roof slab, chajja, shelves etc. finished even and smooth without using extra cement (including all necessary scaffolding, lifting arrangment for three storey building on external surfaces) all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats and similar items. Fe-410- W (Gde- E-250) quality - B all as specified and as directed.

M&L for rolled structural steel work as in rafters, purlins, where connected to common rafters and running rails fixed with angle cleats or other connecting plates, wind ties for roof etc Fe-410- W (Gde- E-250) quality -B all as specified and as directed.

S&F Plates (plain or chequered channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410- W(Gde- E-250) quality -B all as specified and as directed.

M&L wrought second class hard-wood in scantlings timber fixed all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

M&L for 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L- type or J-type hooks complete all as specified and as directed by the Engineer in Charge.

M&L 6mm thick Asbestos cement serrated ridge for corrugated or semi corrugated sheets all as specified and as directed.

S&F 4mm thick of size 605X605 mm, white pre-premiered, self embossed, Reinforced Designer Board for false ceiling Conforming to IS-14862 and ISO-8336:1993. as per specification under mentioned: (i) GI section frame work (POWDER COATED) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mmX19mmX0.45mm, cross 'Tee' 28.6mm (web)X 24mm flange .33mm thick powdered coated main tee 38(Web) X24mm flange 0.33mm thick. wall angle screwed fixed to brick wall/partition wall/concrete/RCC with the help of nylon sleeves and screws @ 610 mm C/C , Then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm C/C to soffits. To from grid of 610X610mm cross Tee shall be provided @ 610mm C/C in both directions. Suitable provisions shall be made for fixing the recessed/surface mounting light fittings if any, complete all as specified and directed by Engr-in-Charge.

M & L precast cement concrete 1:2:4 type B-1 using 20mm graded aggregates in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed.

TMT bars (Fe-500) 6 to 8mm dia and over in reinforcement cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

S & F PVC (SWR) pipes 110 mm bore double socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F PVC (SWR) pipes 75 mm bore double socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S & F PVC (SWR) bends 110 mm bore any radius complete all as specified and as directed.

S & F PVC (SWR) bends 75 mm bore any radius complete all as specified and as directed.

S & F PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

Cast Iron floor trap with dia of outlet 75mm with CI grating including jointing to waste pipe fixed in Run lead complete all as specified and as directed.

Cast iron Nahani trap with dia of outlet 75mm with CP grating including jointing to waste pipe fixed in PCC M-15 (Nominal mix) complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pedestal pattern white with plastic sheet cover, chromium plated hinging device, chromium plated spray jet including connecting to drain pipe and to flushing pipe complete all as specified and directed.

S&F in repair WC Orissa pattern white with integral foot rest 580 x 440 mm including PCC bedding 1:2:4 and making good disturbed floor connecting to trap and flush pipe complete all as specified and as directed.

S&F Vitreous China wash basin, white, flat back, size 580x450 mm including 32 mm dia PVC waste pipe, CP brass waste coupling 32 mm dia, pair of MS brackets or MS fastener/bolts for fixing arrangements and 450 mm long PVC connection with PVC nut and washer complete at site all as specified and as directed.

S&F vitreous china urinal, half stall type, white, excluding flushing cistern, flush pipe but including CP waste fitting 32mm bore and PVC waste pipe and fixed complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair PVC low level flushing cistern 10 Ltr capacity white with inlet ball value, float valve and handle including brackets, PVC flush pipe complete all as specified and as directed.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore pipe all as specified and as directed.

S&F Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed suitable for 15 mm bore complete all as specified and as directed.

S&F in repair Bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and as directed.

S&F in repair stop valve/angle valve cast copper chromium plated screwed down high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair stop valve 20 mm dia cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair brass chromium plated shower rose 125 mm size swivel type with connecting rod 15 mm bore complete all as specified and as directed.

S&F stainless steel gratings of outer frame dia 150 mm open able type including all necessary fitting such as hinges including embedding in tiles with white cement all as specified and as directed.

S&F PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipes of 15 mm bore all as specified and as directed.

S&F 15 mm dia galvanised pipe medium grade with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

S&F 20 mm dia galvanised pipe medium grade with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and as directed.

Fixing only 15 mm dia old galvanised pipes including new fittings where necessary fixed complete to wall and ceiling or laid in floor all as specified and as directed.

Fixing only 20 mm dia old galvanised pipes including new fittings where necessary fixed complete to wall and ceiling or laid in floor all as specified and as directed.

Cutting chases for concealed water tubing or concealed conduit & making good in CM 1:3 of grith exc 10 cm and n.exc 20 cm in brick wall all as specified and as directed.

S&F rotational moulded polythylene water storage tank with float valve, plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 Ltr including making connections complete all as specified and as directed.

S&F rotational moulded polythylene water storage tank with float valve, plastic lid cover, double layered, cylindrical verticl with closed top hoisted and fixed in position of capacity 500 Ltr including making connections complete all as specified and as directed.

Removing of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust foreign items all as specified and as directed.

Roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping, cleaning and washing down with water to remove dust all as specified and as directed.

M&L brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed.

M&L Rendering 15 mm thick on concrete surfaces in cement mortar 1:4 mixed with liquid water proofing compound and finished fair and even without using extra cement all as specified and as directed

M&L Applying evenly a tack coat of Industrial Bitumen 85/25 at the rare of 1.2 kg per Sqm including cleaning the surface complete all as specified and as directed.

Supply and laying APP modify polymeric membrane with mineral finished on top, minimum 3mm thick, weighing not less than 3.5 Kg/Sqm reinforced with polyester non oven febrics as per manufacture instruction and as per direction all as specified and as directed.

M&L for heat resistant paint on surface of any description such as APP Maimbrain, Iron, Concrete, bricks, stone etc. exc 10cm in width or girth complete all as specified and as directed.

M&L preparation surface of sunken slab and applying 15mm thick plaster in cement morter 1:4 mixed with water proofing compound both on floor and wall @ 200ml per 50 Kg bag of cement. Then apply Epoxy Resin coating with modified cementitious coating like Brush Bond of Fosroc/Pedilite/Bostic as per manufacture instruction both on floor and wall complete all as specified and as directed.

Supply only integral liquid water proofing admixture of approved make all as specified and as directed.

S&F Stainless steel kitchen sink with drainage board made of stainless steel of 1 mm thick sheet including plugs, washers and pvc waste pipe of 40 mm dia. Fixing with complete on appropiate size of cantilever brackets of MS angle or GI pipe 15 mm dia with proper arrangment to hold and fitting of sink complete all as specified and directed at site and connecting union to pipe. The overall size of sink 915mm x 460mm and bowl size 410mm x 330mm x 160mm.

S&F stainless steel grade 430, glossy finish, wall hanging plate rack inclusive of spoon hanger, made out of 1 mm thick sheet of size 750 x 600 x 250 mm having partition as per sample kept in AGE B/R Office and fixed with steel fasterners or steel screwed complete all as specified and as directed.

Preparation of new plastered surfaces and applying two coats of white wash on walls complete all as specified and as directed by the Engineer in Charge.

Preparation of old plastered surfaces and applying two coats of white wash on walls complete all as specified and as directed by the Engineer in Charge.

Preparation of new plastered surfaces and applying two coats of white wash on ceilings complete all as specified and as directed by the Engineer in Charge.

Preparation of old plastered surfaces and applying two coats of white wash on ceilings complete all as specified and as directed by the Engineer in Charge.

Preparation of new plastered surfaces and applying two coats of oil bound distemper on walls over a coat of chalk whitening complete all as specified and as directed by the Engineer in Charge.

Preparation of old plastered surfaces and applying two coats of oil bound distemper on walls complete all as specified and as directed by the Engineer in Charge.

Preparation of new plastered surfaces and applying two coats of cement base paint on walls over a coat of chalk whitening complete all as specified and as directed by the Engineer in Charge.

Preparation of old plastered surfaces and applying two coats of cement base paint on walls complete all as specified and as directed by the Engineer in Charge.

M&L two coats of synthetic enamel paint tint over old painted steel surfaces over 10 cm in width or girth including preparation of old surfaces of steel all as specified and as directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint all as specified and as directed.

M&L for preparation of new wood or wood based surface and applying two coats of synthetic enamel paint over one coat of pink primer, all as specified and as directed.

M&L for preparation of old wood or wood based surface and applying two coats of synthetic enamel paint all as specified and as directed.

M & L 750 mm wide, 50 mm thick PCC 1:2:4 laid to an outward slope of not less than 1:12, cast in panels not exceeding 2.00 SM areas with 6mm wide joints. The joint shall be filled with mastic filling and 10 mm wide Joints between the walls and plinth protection shall be filled with mastic filling complete all as specified and as directed.

S&F in repair MS PVC coated drapery rods of 25 mm dia complete with coloured conical end balls at both end, dia not less then 50mm and fitted with and including MS PVC sheeted/power coated bracket size 150mm made to shape or 75mm dia PVC/PVC Coated coloured end wall to wall round block made to shape in male and female pieces as required at site all as specified and as directed.

S&F in repair steel drapery rods of 25 mm dia fancy type complete with end balls at both end and fitted with bracket and end wall to wall round block made to shape in male and female pieces as required at site all as specified and as directed.

S&F in repairs PVC cover for 500 ltr PVC water storage tank all as specified and as directed.

M&L Cement concrete 1:3:6 Type C-0 using 12.50mm graded stone aggregate as in back fill of pressed steel door frames complete all as specified and as directed by the Engineer in Charge.

Supply and fixing Waste fittings/coupling, brass, chromium plated with long screwed shanks and fly nuts of size 32mm complete all as specified and as directed.

Supply and fixing Waste fitings/ coupling, brass, chromium plated with long screwed shanks and fly nuts of size 40mm complete all as specified and as directed.

Supply and fixing PVC waste pipe 32mm bore complete all as specified and as directed.

Supply and fixing PVC waste pipe 40mm bore complete all as specified and as directed.

S&F Aluminium door stopper 150mm for doors complete all as specified and as directed.

Supply and fixing in repairs Floor door seal one mtr long of mild steel body with fiber brushes all as specified and as directed.

Brass spindle for 15mm Bib tap (long body/ short body), angle valve, stop cock, pillar tap etc full/ half turn, any type fixed in repair complete all as specified and as directed.

S&F in repair syphone kit for 10/15/20 ltr PVC Flushing Cistern all as specified and as directed.

S&F in repair PVC Handle for 10/15/20 ltr PVC Flushing Cistern all as specified and as directed.

S&F Anodised aluminium frame powder coated (minimum thickness of power coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S & F for Anodised aluminium door shutters power coated (minimum thickness of power coating 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S&F Anodised aluminium powder coated of any colour window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/ m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

S&F 5.5mm thick sheet glass ordinary quality and glazing with oil putty n exc 0.5sqm in each pane all as specified and as directed.

S&F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed completed all as specified and as directed.

M/S OM GUPTA

Jagbir Singh and Co

MADHAV CONSTRUCTION COMPANY

Bidder Name

Vijay Kumar and Co

MADHAV CONSTRUCTION COMPANY

Jagbir Singh and Co

M/S OM GUPTA