REPAIR MAINTENANCE OF ELECT WIRING AND ITS ACCESSORIES AT VARIOUS LOCATIONS IN STN UNDER GE JHANSI

Amount

Taking down carefully existing copper/aluminium point wiring (light, fan, socket or power) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, regulators, sockets, bell push and call bell wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc with cement plaster, putty and paint to match with the existing surface complete all as specified and directed.

M&L point wiring for one light point with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of electrogalvanised mild steel terminal box of thickness not less than 18 SWG with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic ISI marked laminated sheet fixed with brass screws for mounting switches, sockets, fan regulator, etc controlled by one switch complete all as specified and directed.

One light / ceiling fan / exhaust fan / call bell point controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

All as per item No. 2.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires.

All as per srl item No 2 here-in-before but with 4 sq mm FRLSH copper wire with 4 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.

All as per item No. 2.00 here-in-before but with 2.5 Sqmm one 16A socket point controlled by one 16A switch on independent board but just below / above the existing socket points / DBs up to one meter distance in the same vertical plane.

M&L for point wiring for modular fittings complete with 1.5 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of modular electrogalvanised terminal boxes, cover plates with frames and 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLSH) cable for common earth and connecting to earth dolly all as specified and directed by Enrg-in-charge. (Note- rates of chasing/cutting & making goods shall be included in the unit rate) :-

One light / ceiling fan / exhaust fan / call bell point controlled by one switch

One 6A socket point controlled by one switch on independent board

One 6A socket point controlled by one switch on same board

All as per item No. 3.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires.

All as per srl item No. 3 here-in-before but with 4 sq mm FRLSH copper wire with 4 Sqmm FRLSH copper earth wire for one 16 Amp socket point controlled by one 16 Amp switch on independent board.

All as per item No. 3.00 here-in-before but with 2.5 Sqmm one 16A socket point controlled by one 16A switch on independent board but just below / above the existing socket points / DBs up to one meter distance in the same vertical plane.

BLANK

M&L for sub main wiring along with earth wire with FRLSH insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of any description complete all as specified and directed for the following sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length)

2 Runs X 2.5 Sqmm + 1 run X 2.5 Sqmm.

2runs x 4 sqmm(Ph & N) + 1run x 4 sqmm(earth wire)

2runs x 6 sqmm(Ph & N) + 1run x 6 sqmm(earth wire)

2runs x 10 sqmm(Ph & N) + 1run x 10 sqmm(earth wire) Notes for item No 2.00 to 5.04 (i) Quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface. (ii) If any beam / column / Rock wall is encountered while cutting chases, that particular portion may be provided with PVC casing & capping or surface conduit for drawing cables and surface PVC gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) No cutting shall be done on ceiling for laying PVC conduit for ceiling fan point wiring. Surface conduit or PVC casing capping may be used in that portion.

S&F of Switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed.

S&F of Switch piano type, single pole, one way, 16 amps, 240 volts, complete all as specified and directed.

S&F of electronic fan regulator in 5 steps, 240V, 50Hz complete all as specified and directed.

S&F of Socket 5 pin, 6 Amp, universal type, 240 volts, complete all as specified and directed.

S&F of Socket, 6 pin, 6/16 Amp, multipurpose 240 volts, complete all as specified and directed.

S&F of Modular switch 1 way 6A, 1 module 240V, 50Hz complete all as specified and directed.

S&F of Modular switch 1 way 16A, 1 module 240V, 50Hz complete all as specified and directed.

S&F of Modular fan regulator step type in 5 steps two module, 240V, 50Hz complete all as specified and directed.

S&F of Modular Socket, 6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.

S&F of Modular Socket 6A/16A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed.

S&F of Modular blank plate 1 module complete all as specified and directed.

S&F of Lamp holder, angle type with metal ring, PVC/Polycarbonate body complete all as specified and directed.

S&F of Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed.

S&F of integrated LED batten 10 watt, 2 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.

S&F of modular MCB protected plug and socket board in sheet steel enclosure with 25A rated mini MCB and 20A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed.

S&F of integrated LED batten 20 watt, 4 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.

S&F of integrated LED batten 20 watt, 4 feet long, Tri light (cool white, warm white & Morning white) combination of these in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed.

S&F of LED bulkhead luminaire 10W in die-cast aluminium alloy/ PVC body heat resistant prismatic glass cover, with specially designed gasket for minimum IP 55 degree of protection complete all as specified and directed by Engineer-in-Charge.

S&F of LED street/security light fitting 30 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed.

S&F of LED street/security light fitting 45 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed.

S&F of LED post top lantern light fitting 20watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv and complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP65 degree of protection including provision of 25mm dia medium grade GI pipe of length 0.50m bent to required shape and fixing on ground/walls with pcc 1:2:4 using 20 mm size stone aggregate upto 30 cm and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed.

S&F of sleek round recessed cum surface mounting LED down light 12 W with aluminium die-cast body, finish with drop down PC diffuser warm / full white with optimized heat sink for efficient dissipation complete all as specified and directed.

Taking down unserviceavle VTPN/ TPN DB with MCB's of any make/capacity complete all as specified and directed by Engr-in-Charge.

S&F of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including M&L MCCB 100A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release complete all as specified and directed. Note: MCCB / MCBs only shall be measured and paid separately, cost of MCCB shall be deemed to be included in the quoted rates.

S&F of MCB distribution board, TPN, 4 way, 415 V, 3 phase, AC in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Taking down unserviceavle Sheet metal box & MCB DB SPN with MCB's of any make/capacity complete all as specified and directed by Engr-in-Charge.

Supply and fix MCB distribution board, MCB DB SPN, 12 way, 230 Volt, Single phase, AC in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Notte: (i) MCBs shall be measured and paid separately. (ii) In case cutting & chasing is encountered with any beam / column/Stone wall, the DBs may be installed on stone wall only as directed by Engineer-in-charge.

Supply and fix MCB distribution board, MCB DB SPN, 8 way, 230 Volt, Single phase, AC in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Notte: (i) MCBs shall be measured and paid separately. (ii) In case cutting & chasing is encountered with any beam / column/Stone wall, the DBs may be installed on stone wall only as directed by Engineer-in-charge.

Supply and fix MCB distribution board, MCB DB SPN, 04 way, 230 Volt, Single phase, AC in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed. Notte: (i) MCBs shall be measured and paid separately. (ii) In case cutting & chasing is encountered with any beam / column/Stone wall, the DBs may be installed on stone wall only as directed by Engineer-in-charge.

S&F of MCB 100A, 10 KA, TPN, 415 V, 50 Hz complete all as specified and directed.

S&F of MCB 63A, 10 KA, TPN, 415 V, 50 Hz complete all as specified and directed.

S&F of MCB 40A, 10 KA, SPN, 'C' curve, 240 V, 50 Hz complete all as specified and directed.

S&F of MCB 6 - 32A, 10 KA, single Pole, 'C' curve, 240 V, 50 Hz complete all as specified and directed.

S&F of call bell ding dong, AC, 240V, 50Hz complete all as specified and directed.

S&F of Modular Bell Push , flush type, 6Amp, 1 module 50Hz complete all as specified and directed.

S&F of Bell Push , flush type, 5 Amp 50Hz complete all as specified and directed.

Supply and fix of ventilating fan with plastic body with louvers, 200mm sweep, single phase, 230 volts, 50 Hz. Complete all as specified and directed.

Supply and fix of ventilating fan with plastic body with louvers, 250mm sweep, single phase, 230 volts, 50 Hz. Complete all as specified and directed.

S&F of Decorative wall light fixture made up of Polycarbonate with and including 7W retrofit LED lamp, full white/ Warm white of approved model complete all as specified and directed.

S&F in replacement of 3mm thick phenolic laminated hylam sheet of size 9" X 11" including necessary cutting, drilling holes for fixing of switches, sockets & fan regulators etc and fixing the hylam sheet on existing metal flush box with brass/GI screws with washers complete all as specified and directed. Note: S&F of switches, sockets & regulators shall be measured and paid separately.

S&F in replacement of 3mm thick phenolic laminated hylam sheet of size 8" X 5" including necessary cutting and drilling holes for fixing of switches, sockets & fan regulators etc as per site requirement and fixing the hylam sheet on existing metal flush box with new brass/GI screws with washers complete all as specified and directed. Note: S&F of switches, sockets & regulators shall be measured and paid separately.

Supply and fix in replacement of 3mm thick phenolic laminated hylam sheet of size 5" X 5" including necessary cutting and drilling holes for fixing of switches, sockets & fan regulators etc as per site requirement and fixing the hylam sheet on existing metal flush box with new brass/GI screws with washers complete all as specified and directed by Engineer-in-Charge. Note: S&F of switches, sockets & regulators shall be measured and paid separately.

Taking down old unserviceable of LT cable of any type and any size complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed, 16 sq. mm nominal cross section, 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 25 sq mm 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed, 10 sq. mm nominal cross section, 2 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

Supply and fix in replacement of 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor twin core, 10 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections including connecting on LT OH line / energy meter / DB etc complete all as specified and directed.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for laying of GI Pipe and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engineer-in-Charge.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- (a) The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II. (b) Earthing result should be less than 3 Ohm required.

S&F LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling/grid ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer-in-Charge.

S&F LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type (Cool white & warm white) gypsum ceiling with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement PVC conduit including fitting such as tee,elbow,bend etc 20mm dia ISI (MMS)grade, incl taking down old unserviceable conduit all as specified and directed.

Supply and fixing in replacement PVC cassing Capping tee,elbow,bend etc 20/25 mm dia ISI ISI (MMS) incl taking down old unservecable cassing capping all as specified and directed.

Supply and fix in Solar flame light LEDs, spike type with ABS housing, 0.50 Watt, CCT 3000K, with inbuilt PV panel, lithium battery, water proof suitable for outdoor use of approved model including taking down existing unserviceable light fitting of any description complete all as specified and directed.

Attending daily complaints of Jhansi Mil area by deputing adequate number of Skilled teams of qualified Electrician and helper round the clock for repair, maintenance and making the continuity of electric supply. After rectifying the defects of the electrical system by replacing the U/S items such as switches, sockets, distribution boards, MCB light/power , lamp holders-bracket/ pendent/ batten, bell/ buzzer , push button, ceiling rose, capacitors and other similar nature of works , light & power plug, ceiling fan and geyser including provisioning of small pieces of electrical cables PVC insulated copper multistranded conductor of sizes 1.5 Sqmm to 6 Sqmm single core and length not increasing 0.50 mtrs complete all as specified and directed by Engr-in-Charge. (Complaint slip shall be part of the bill) as per directed by Engr-in Charge. Note:- (i) Contractor shall be fully responsible for Complaint slip/ Job card prepared and submitted on daily basis ( Format as per provided by the Engineer in Charge. (ii) This item pertains to attending complaints of light/fan/power point, MCB DB including other minor items such as insulating tape, screws etc as required to attend the complaint to the entire satisfaction of user/Engr-in-Charge. (iii) Items shall be measured and paid seperately under respective item of Sch 'A' (iv) Electrician and helder report to E/M Yard on daily basis.

Supply and fix in replacement fan capacitor 2.5 m.f.d for ceiling Fan, incl taking down old unserveable capacitor all as specified and directed.

Supply and fix in replacement fan capacitor 4 m.f.d for Exhaust Fan,incl taking down old unserveable all as specified and directed.

S&F of LED Step Bollard light having step profile placed on top ideal for architectural outdoor lighting typically giving off light from the sides suitable to illuminate walkways, steps or pathway with rated power 10 W cat ref LLGBL-10-W or eqivalent complete all as specified and directed.

S&F of Edge Recess round panel ultra slim recess -mounting round LED downlighter light 6 W with aluminium die-cast body, finish with drop down PC diffuser warm / full white with optimized heat sink for efficient dissipation complete all as specified and directed.

S&F LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F of Deep Recess - mounting COB LED downlights nucleus Deep Recess 10W made of extruded aluminium housing and high lumen LED as a light source with clear diffuser and separate electronic driver complete all as specified and directed.

Supply and fixing in replacment electronic adapoter for LED light up to 30 watt including takingdown old unserviceable electronic adaptor of LED as per sample Make CG or equivalent in : Havells/Bajaj/Philips.

Supply and fixing in replacement modular cover plate with frame 4 module type for fixing of modular switch socket, regulators, blank plates etc incl dismentaling old unserviceable cover plate complete all as specified and directed.

Supply and fixing in replacement modular cover plate with frame 8 module type for fixing of modular switch socket, regulators, blank plates etc incl dismentaling old unserviceable cover plate complete all as specified and directed.

BLANK

Supply and fixing in replacement electronic driver as per sample for LED fitting up to 45 watt ncl taking down old unserviceable driver . Make Crompton/Havells/CG/Philips/Osram.

Supply and fix in replacement 2-Watt LED Wall Light (bed light) for reading incl taking down old UNSV light all as specified and directed by Engr-in-charge make Philips 30975 or equivalent in Havells/ crompton etc.

supply and fix in replacement Spot light 6 Watts Black/ white Body LED Spot Light, Focus Light (Warm White) incl taking down old UNSV ligh all as specified and directed by engr-in- charge. Make CG CAT NO 211 - 06 - 40 - SL - NWH or eqvi in Philips/CG/Bajaj

BLANK

Supply and fixing PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 1.5 sqmm as in replacement of any defective/burnt circuit incl taking down old UNSV cable.

Supply and fixing repair PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 2.5 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable.

Supply and fixing repair PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 4.0 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable.

Supply and fixing repair PVC insulated and unsheathed FRLS H single core multistranded copper conductor for repair, in existing conduit of size 6.0 sqmm as in replacement of any defective/burnt circuit.incl taking down old UNSV cable.

S& F Street light bracket made out of medium grade GI Pipe, bent to shape including GI Clamps nut,bolts washers,reducer of required size for suitable any type fittings etc complete including necessary painting and taking down old UNSV GI Bracket all as specified and directed by Engr-in Charge.

M & L in replacement GLS Coloured Lamp Red,Green,Milky,0-60 Watt

S & F in replacement LED Bulb threaded types in holders 0 to 15 Watts as per existing sample given by department Make Havells/Wipro/Legarnd

S & F in replacement LED Bulb brown in brightness(Warm tpye) 0 to 15 Watts as per existing sample given by department. Havells/Wipro/Legarnd

S & F in replacement chargable LED Bulb 9 Watts as per existing sample given by department.Havells/Wipro/Legarnd

Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store or repair and refixing in same position including connector from ceiling rose to fan connector complete.

Taking down exhaust fan and refixing and connecting up including provision of cable from ceiling rose to connector to fan directed by engr in charge.

Supply and fixing of LED batten with CRCA sheet steel box type body pre-wired suitable for and including provision of 1 x 20 Watt (4 feet) retrofit LED tube with PC body, full white and connecting up with twisted three core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and directed.

M&L to attend major/minor fault/No light due to any reason like neutral fail or short circuit complete including patrolling or rectification of complaint etc.

M/S Kumar Contractors (BID ID -3330582)

M/s Sohanil Construction (BID ID -3326023)

RAVI TRADERS (BID ID -3330514)

VIJAY BUILDERS (BID ID -3330044)

M/s Raghav Traders (BID ID -3330443)

Flint India (BID ID -3327491)