REPAIR TO JOINERY, PLUMBING, SANITARY FITTINGS, TILING, WALL PANELLING AND OTHER MISC WORKS UNDER ZONE-III OF AGE B/R-III UNDER GE (SOUTH) MEERUT CANTT

Amount

Taking down of chowkhat with shutter (without taking off shutters from the frame) area n.exc 1.50 sqm each complete all as specified and directed

All as per item No 1.00 above but area exc 1.50 Sqm but n.exc 4.00Sqm each.

Taking down of sutters of any description n.exc 1.00 sqm each complete all as specified and directed

Taking down of sutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each complete all as specified and directed

Supply and fixing mild steel framed work as in doors / windows or gates of angle, with gusset plates, rails, braces, etc. drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or top covering running rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed

Supply and fixing 1.00 mm thick mild steel plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes, punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and directed

Supply and fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc size of frame 125x60mm made out of 1.25mm mild steel sheets complete all as specified and directed

Supply and fixing pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc size of frame 105x60mm made out of 1.25mm mild steel sheets complete all as specified and directed

Material and labour for PCC 1:3:6 type C-1 (20mm graded crushed stone agg) filling in pressed steel door chowkhat/hold fast blocks complete all as specified and directed

Supply and fixing factory made 35mm thick 2nd class HW plain framed panelled shutter with lock rail and panel of 9mm BWP commercial ply or 12mm venered particle board with commercial veneering on both faces, the size of rail and stile as per IS: 1003 Pt-I , kiln seasoned and chemically pressure treated complete all as specified and directed

Supply and fixing 35mm thick second class hardwood glazed and skeleton shutters of open nebated and prepaired to receive glass gauge etc, (with sash bars) edgeg of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member of shutter as specified in SSR Pt-I section 8 ,clause 8.24(a) complete all as specified and directed

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II).

Supply and fix factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing as shown on page No 178 of SSR 2020 (Part-II) complete all as specified and directed.

Supply and fixing 100mm long butt hinges, cold rolled mild steel, medium weight complete all as specified and directed .

Supply and fixing 100mm long butt hinges heavy duty cold rolled stainless steel complete all as specified and directed .

Supply and fixing aluminium anodised barrel tower bolts of extruded section and fixed 150mm long complete all as specified and directed .

Supply and fixing aluminium alloy anodised sliding door bolt 250mm long with hasp staple bolt type and fixing clips of sheet etc complete all as specified and directed .

Supply and fixing 150mm long aluminium handles cast type anodized complete all as specified and directed .

Supply and fixing 300mm mild steel ordinary rat tail rod pattern spring incl roller & roller plate complete all as specified and directed .

Supply & fixing mild steel pressed handle 125 mm in size oval type stove enamelled black complete all as specified

Supply and fixing Mild steel tower bolts of 150mm long and 10mm dia stove enamelled black with bright bolt complete all as specified and directed.

Supply & fixing, Mild steel sliding door bolt 250mm long 16mm dia with and including minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified

Supply & fix steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including cutting holes and painting with one shop coat of zinc chromate primer including dismantling of old steel windows and making good the disturbed surfaces to match with the existing surfaces complete all as specified & directed.

Supply & fix steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including cutting holes and painting with one shop coat of zinc chromate primer including dismantling of old steel windows and making good the disturbed surfaces to match with the existing surfaces complete all as specified & directed.

Supply & fix steel ventilators , top hung shutters ,hinges, steel handle and steel peg stay complete including painting with one coat of zinc chromate primer and dismantling existing steel ventilator complete all as specified & directed.

Supply & fix guard bars of mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-290 Gde F-165 complete all as specified & directed.

Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame complete all as specified & directed.

Supply & fix 3 mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane incl one coat of synthetic enamel paint to oil putty complete all as specified & directed.

All as per serial item No. 28 above but pin headed glass 3 mm

Supply & fix galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

Supply & fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

Supply and fixing in repair 19/20mm thick particle board grade 2 quality, interior grade, commercial type fixed with screwed to timber frame work as in cup board shutters, shelves etc complete all as specified and directed .

Material and labour for preparation of new wooden surface and applying two coat of synthetic enamel paint over a coat of pink primer including preparation of surface, over 10 cm width or girth complete all as specified and directed .

Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface incl preparation of surface over 10cm width or girth complete all as specified and directed .

Supply and fixing powder coated anodized aluminium door made out of hollow extruded aluminium sections chowkhat frame : 110.60 x 44.45 x 1.55 mm, Shutter:- stile : 85 x 44.45 x 1.54 mm, Shutter middle rail : 83.50 x 44.45 x 1.54 mm, Top and bottom rail : 1.15 x 44.45 x 1.54 mm, each door having 02 Nos disc or D type handles, 02 Nos aluminium tower bolts 200 mm size, one aluminium sliding door bolt of 250 mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydraulic floor door spring of stainless steel , shutter to be partly glazed with 5mm thick tinted glass and partly panelled with 12 mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasket anodised aluminium beading screws etc complete all as specified and directed.

Supply and fixing powder coated aluminium sliding window made out of hollow extruded aluminium sections Shutter top and bottom size : 37.50 x 15 x 1.60 mm thick Shutter inner lock size 37.50 x 15 x 1.60 mm Shutter side (handle) size 37.50 x 15 x 1.36 mm Chowkat bottom size : 50.30x26x1.20 mm Chowkat top & sides : 50.30x15x1.00mm , shutter glazed with tinted glass 4 mm thick fixed with glazing clips rubber beading / gasket anodised aluminium beading screws and lock type handles of size 75 mm, 2 Nos aluminium tower bolts 150 mm long etc complete all as specified and directed ..

Supply and fixing in repair 20 mm dia mild steel powder coated curtain rods with wall thickness 1 mm including mild steel powder coated, bracket, holding and funnel on ends complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Material and labour for 6mm thick asbestos cement, corrugated or semi-corrugated fibre sheets in roofs, walls etc. fixed with L type or J type hooks complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Supply and fixing pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply and fixing structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 gde St-240 complete all as specified and directed.

Supply and fixing MS work as in framed work for roof trusses purlin rafter fastning distance pieces cleats etc (including fixing independently vertical post) complete all as specified and directed.

Supply and fixing of structural steel works for plates (plain or chequered) channel, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10 cm long, dia of neck 5 to 10mm complete all as specified and directed.

Supply and fixing in repair 15mm bore bib tap cast copper alloy with crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and directed .

Supply and fixing in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed.

Supply and fixing in repair 15mm bore PTMT bib taps. any colour high pressure ,screwed for iron pipe (minimum weight of pillar tap 90 gms) complete all as specified and directed

Supply and fixing in repair 15mm bore pillar taps cast copper alloy ,fancy type, chromium plated ,screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed .

Supply and fixing in repair 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or pipe or for union complete all as specified and directed .

Supply and fixing in repair 15mm bore stop valve/angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and directed .

Supply and fixing in repair PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and directed .

All as per item No 53 here-in-before but length 600mm.

Supply and fixing in repair cast copper alloy chromium plated shower rose, fancy type fixed to 15mm bore pipe complete all as specified and directed .

Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia ‘D’ type 60 cms long between flanges complete all as specified and directed .

Supply and fixing in repair PVC valveless, syphonic duel action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed .

Supply and fixing in repair vitreous china squatting pan white orissa pattern ,size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron P trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe but including connection to out going pipe and flushing pipe complete all as specified and directed.

Supply and fixing plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed .

Supply and fixing in repair vitreous china wash basin white flat back ,size 580x 450mm excluding taps but incl 32mm dia CP brss waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed .

Supply and fixing in repair kitchen or laboratory sink with drainage board made of stainless steel 1 mm thick with plugs washers incl bedding in cement mortar to dwarf walls or incl fixing cantilever brackets and connecting union to pipe over all size (915mmx460mm bowl size 410x330x160mm) complete all as specified and directed .

Taking down steel tubing and connections 15 mm bore pipe complete all as specified and directed .

All as per item No 63.00 but for 20 mm bore pipe complete all as specified and directed .

Supply and fixing 15 mm bore tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed .

All as per item No 65.00 above but for 20 mm dia complete all as specified and directed .

Fixing only old galvanised iron tubes 15mm bore including cleaning with all new fittings fixed to walls and ceiling or laid in floors complete all as specified and directed . (Note :- Old GI tubing obtained from item No 63 shall be used in this item)

All as per item No 67.00 above but for 20 mm dia (Note :- Old GI tubing obtained from item No 64.00 shall be used in this item)

Supply & fix in repair PVC waste pipe 32mm dia for wash hand basin complete all as specified and directed.

Supply & fix in repair glass shelf assembly made of 5 to 6 mm thick sheet glass of size 600 x 120mm fixed with CP brackets complete all as specified and directed.

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

Supply & fix in repair jet spray /health faucet chromium plated, ABS plastic with stainless steel tube of standard length with PVC holder fixed in WC seats complete all as specified and directed.

Supply & fix in repair brass chromium plated wall mixer suitable for both telephonic shower and overhead shower with long bend pipe complete all as specified & directed.

Supply & fix in repair 15mm dia single lever one hole basin mixture of superior quality with capstan heads, cromium plated cast copper alloy with hot and cold arrangements with long shank and cup , screwed for iron pipe complete all as specified & directed.

Supply and fixed in repair vitreous china urinal, Half stall type,white with grating, union for discharge pipe, flush pipe and waste pipe, CP urinal spreader fixed to water supply pipe etc complete all as specified & directed.

Supply and fixing in repair CP steel grating 100/125mm dia with or without hole for waste pipe as per site requirement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and fix non skid glazed ceramic tiles(any shade) 400mmx400mmx7mm to 8mm thick ,as in floor, set and jointed in neat cement slurry , pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply & fix light shade vitrified tiles coloured superior quality 600mm x 600mm x 8 to 10mm thick as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick screed in CM 1:4 complete all as specified and directed.

All as per serial No. 79.00 here-in-before but in skirting / dado laid over and including 10 mm thick screed bed CM1:6 complete all as specified and directed.

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete all as specified

Material & labour for 25 mm thick plain cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) for laying of floor etc finishing surfaces even and rough to receive top layer of floor finish complete all as specified and directed

Material & labour for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete including sub base of floors etc complete all as specified and directed

Material & labour for 60 mm thick coloured rubber moulded (comparising of red & yelow colour in 50:50 ratio) interlocking pavers blocks in approved design/colour conforming to IS 15658-2006 , M-35 ,set laid over and including 25mm thick coarse sand all as specified and directed.

Material & labour for 12 to 14mm thick udaipur green stone, polished (table rubbed &polished) in steps, jambs, window cills, cooking platforms, sink and the like, set and jointed in neat cement slurry and pointed to white cement and pigment to match laid over and including 15 mm thick screed bed in CM 1:4 incl rounding of edges and making holes for gas pipe etc complete all as specified and directed.

Supply and fixing in repair stainless steel plate rack of size and design as approved by GE/Engr-in-charge made out of 1.00mm thick stainless steel (Salem sheet) and having weight between 9.0 Kg to 9.5 Kg each complete all as specified and directed .

Material & labour for 20-25mm thick machine cut kota stone slab flooring set and jointed in neat cement slurry and pointed to white cement and pigment to match laid over and including 15 mm thick screed bed in CM 1:6 including rubbing and polishing etc completed all as specified.

Material & labour for PCC 1:2:4 type B-1 (20mm graded crushed stone agg) 40mm thick in flooring complete all as specifed and directed.

Material & labour for 75 mm thick PCC1:3:6 type C-2, (using 40 mm graded crushed stone aggregate) in plinth protection, finishing surface even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc complete all as specified and directed.

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

Material & labour for brick work with fly ash bricks, old size , straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per item No 93.00 above but except bricks ( Note :- old bricks obtained from item No 92.00 shall be used after cleaning )

Material & labour for brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Material & labour for 15mm thick rendering in cement mortar 1:6 on brick or concrete wall surfaces of any description , finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for 5mm thick rendering in CM 1:3 on ceiling , surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick on brick or concrete wall surfaces of any description in cement mortor (1:4) finished even and smooth without using extra cement complete all as specified and as directed .

Materials & labour for preparation of new plastered surface of walls and applying two coats of oil bound distemper over and including a coat of wall care putty complete all as specified and directed

Complete removal of existing treatment of walls and applying two coat of oil bound distemper over a coat of primer over and including a coat of wall care putty complete all as specified & directed .

Materials & labour for preparation of new plastered surface of ceiling etc and applying three coats of white wash complete all as specified & directed.

All as ser item No. 101 above but one coat on old ceiling surface complete all as specified & directed.

Materials & labour for preparation of new plastered surface of wall and applying two coat of cement base paint after one coat of chalk whiting primer on wall complete all as specified and directed.

Materials & labour for preparation of old plaster surface of wall and apply two coat of cement base paint complete all as specified and directed.

Supply and fixed double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed.

Demolition & breaking up drain pipe (PVC/AC/salt glaze ware) for 100mm/75mm dia complete all as specified and directed.

Supply and fixing 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes complete all as specified and directed.

All as per item No 107.00 above but 75mm dia bore pipe complete all as specified and directed.

Supply & fix in repair 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply & fix in repair PVC (SWG) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and fix in repair PVC (SWR) bend 110 mm dia complete all as specified and directed.

Supply and fixing in repair 75 mm PVC (SWR) bend fixed to wall/floor complete all as specified and directed.

Supply & fix in repair 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply & fix in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply & fixing 500 litres capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical, vertical in closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks and removing to store complete all as specified & directed.

All as per item no 115 but for 1000 lt capacity complete all as specified and directed.

Supply & fixing in repair PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

Supply and fixing 5mm thick prelaminated coloured PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC wall lining, Insulated PVC wall lining, and Solid PVC partitions inclusive of solvent cement and fixing at site complete all as specified and directed.

Supply and fixing for aluminium anodised snap grid frame work of size 605 x 605 mm, for false ceiling comprising 40mm x 25mm x 2mm aluminium angles weight 0.36 kg fixed all along the wall at ends and with aluminium main and cross tee of size 36.50 mm x 25 mm x 1.4 mm weigth not less than 0.24 kg per RM including aluminium cleat bolts nuts and washers and 4mm dia GI wire suspenders in alternates panel and preparing holes / chases in wall for fixing angle including fixing suitable for non asbests fibre cement boards in ceiling complete all as specified and directed .

Material and labour for 4 mm thick ceiling boards 600 x 600 mm, fixed or laid / inserted to timber / GI / Aluminium frame work with screws in ceiling and applying three coat of white wash including preparation of surface complete all as specified and directed .

Jay Ambay Enterprises

CHANDRA ENGINEERS

jitendra AND Co