REPAIRS TO PATHWAY, FENCING, HARD STANDING, COMPOUND WALL ETC IN KABUL LINE (OFFRS), CAPT ANUJ NAYYAR ROAD, KARAM VIHAR, SUMRAN LINE, NEW MORE LINE, DID LINE AND MESSES (ENGRS, 1/5 GR, DELHI AREA), NC HUT AND OTM ACCN IN THE AREA OF AGE B/R-II UNDER

Demolition of cement concrete unreinforced in Ground floor & paving not exc 15cm thickness and removal of debris from site all as specified and directed

M&L for cement concreat type D2 (1:4:8) using 40mm graded stone aggregate 100 mm thick as in sub base of path etc finished surface fair and even w/o using extra cement as specified and directed.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300X300X 25mm thick on floors over and including 15 mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

M&L for Cement concrete 1:5:10 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing with interlocking paver blocks, complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness M-40 Grade, complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 Grade, complete all as specified and directed.

M&L for PCC in 1:2:4 type B1 (using 40 mm graded aggregate) 100 mm thick as in hardstanding (The PCC will be laid with 12mm expansion Gap and the gap will be filled up with bituminous joint filler type A) complete all as specified and directed.

M/L cement concrete in 1:3:6 Type C1(20mm graded stone aggtts) as in filling in lintels upto 1.5M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing course, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. Make : Neco/ Raj/ SKR/ KK