Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.1 LAccepted-AOC | L1 | Accepted-AOC Found lowest bidder | |
| 2 | L2₹29.1 L+₹42,634.50 (1.49%)Rejected-Finance PLOT NO 46 SECTOR PH I 03 GREATER NOIDA UP 201306 | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201306 | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹29.7 L+₹1.0 L (3.55%)Rejected-Finance 128 ALLEN MARKET SADAR KABARI BAZAR MEERUT CANTT 250001 | MEERUT CANTT | MEERUT | UTTAR PRADESH | 250001 | L3 | Rejected-Finance 3rd lowest | |
| 4 | L4₹29.8 L+₹1.1 L (3.90%)Rejected-Finance D 89 SHASTRI NAGAR MEERUT 250004 | MEERUT | UTTAR PRADESH | 250004 | L4 | Rejected-Finance 4th lowest | |
| 5 | L5₹29.8 L+₹1.1 L (3.95%)Rejected-Finance 91 DEFENCE ESTATE PHASE II NEAR AMBEDKAR PARK DEORI ROAD AGRA UP | AGRA | UTTAR PRADESH | 282001 | L5 | Rejected-Finance 5th lowest |
Tender Value
₹48.0 L
EMD Value
₹95,920
Closing Date
5 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (North) Meerut Cantt
Office of the GE (North) Meerut Cantt
SPECIAL REPAIR TO BLDG NO 13/F RA LINE AND PROVN OF SEPTIC TANK SEWAGE LINE AND SOAK PITS FOR 148 LT AD REGT ( COMP) UNDER GE (NORTH) MEERUT CANTT
2023_MES_612661_1
8440/E8
Open Tender
Civil Works
Item Rate
180 days
Meerut
Class D category a (i)
8 documents required · 8 mandatory
₹500
GE (North) Meerut Cantt
₹95,920
Yes
21 Oct 2023
8 Aug 2023
7 Sept 2023
8 Aug 2023
5 Sept 2023
22 Aug 2023
Amount
Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc omplete all as specified and directed
Demolition of brick work or stone boulders masonary built in cement mortar including all arches, pillars etc omplete all as specified and directed
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes and disposal of debries omplete all as specified and directed
Dismantling, Asbestos cement (Plain,corrugated, semicorrugated, etc.) sheets in roof coverings omplete all as specified and directed
Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises omplete all as specified and directed
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc omplete all as specified and directed
Dismantling timber scantlings 40 sq.cm and over in section, in any position unframed work omplete all as specified and directed
M&L for brick work with fly ash sub class 'B' old size bricks straight or curved on plain exc. 6m mean radius built in CM 1:6 omplete all as specified and directed
S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws omplete all as specified and directed
Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets omplete all as specified and directed
S&F GI snap grid frame work for false ceiling of size of grid 605x605mm all as specified and Hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to steel frame work complete all as specified and directed.
S&F fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions omplete all as specified and directed .
S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with single cleats or other connecting plates quality conforming to Fe-410W(Gde E-250). quality A omplete all as specified and directed .
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide omplete all as specified and directed .
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone agg) 25 mm thick for Sub base flooring omplete all as specified and directed
M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match laid over and including 15 mm thick screed ded in cement mortar 1:6 omplete omplete all as specified and directed
S&F non skid coloured ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement over 15mm screed bed in cement mortar 1:6 complete all as specified and directed.
All as per item No 17.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
S&F Coloured Glazed colour ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in cement mortar(1:4) joint free with grout of matching shade omplete all as specified and directed
M&L for 16-18mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each omplete all as specified and directed .
Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each omplete all as specified and directed .
S & F factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed.
S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.
S & F Factory made gauzed shutter made out of angle iron 35mmx35mmx5mm and 5 mmx25mmx5mm and 1.5 mm thick, 10 mm square bar grill with stainless steel wiremesh having 0.50mm nominal diaof wire and 1.20 mm average width of aperature including two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified.
S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S&F in repair, 18/19mm thick WPC Solid board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with SS screws to WPC frame work in cup boards, and kitchen cabinet rebated or flat edged fancy handle , each leaf 02 Nos Magnite lock complete all as specified and directed.
S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.
S&F for Steel ventilator with top hung shutter including hinges, steel peg stay, omplete all as specified and directed .
S&F aluminium sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plateomplete all as specified and directed .
S&F 100mm butt hinges, medium weight, cold rolled, mild steel omplete all as specified and directed .
S&F aluminium anodised tower bolts 150mm long, of extruded section omplete all as specified and directed .
Supply & fix 150mm size aluminium alloy handles cast type anodized complete all as specified & directed.
S&F, 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed.
M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, omplete all as specified and directed .
M&L stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.
S&F 3.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane omplete all as specified and directed
S & F for Stainless steel wide 110 degree Hydraullic hing fixed with ss screw omplete all as specified and directed .
S&Faluminium anodised barrel tower bolt with bright bolt 200 mm long omplete all as specified and directed
M&L for stone slab 50mm thick stone dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.
S&F mild steel 150mm size helical door spring including roller and roller plate fixed with screws to wooden chowkat or welded to steel frame, complete all specified and as directed.
M & L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:6 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per 50 kg weight of cement bag or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid sepratly
M&L Rendering 5 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), omplete all as specified and directed .
M & L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per 50 kg weight of cement bag or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid sepratly
M & L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.
M& L for preparing plastered or un plastered new surfaces on ceiling and applying three coats of white wash on ceiling surface omplete all as specified and directed .
M & L for preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth Finishing walls using roller for painting complete all as specified & directed.
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting .
Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide ( reinforcement cut to faciliatate demolition) omplete all as specified and directed .
M&L for form work to sides and soffits of beams lintels etc for rough finished flat surfaces of concrete omplete all as specified and directed .
M & L for RCC 1:2:4 Type B0 using 12.5mm graded crushed stone aggregate as in beams, lintels, bressummers over 1.5 m span etc omplete all as specified and directed .
M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface all as specified and directed
M&L for Cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate in benching /coping and the like including weathering, slightly rounded or chamfered angles as directed including form work and finishing all exposed surfaces including necessary form work complete all as specified and directed .
M&L for applying two coats of cement base paint on walls after complete removal of existing treatment all as specified and as directed
M & L for applying two coats of oil bound distemper on wall surface surfaces after complete removal of existing treatment all as specified and as directed
S&F in repair, 25mm dia, powder coated, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets, complete all as specified and directed.
Taking up or down steel tubing and connection 15 mm bore pipe and removing from site omplete all as specified and directed
All as per Sl Item No.57 here-in-before but 20 mm bore pipe omplete all as specified and directed .
Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified
Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified
Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site omplete all as specified and directed .
S&F triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks any type & removing complete all as specified.
S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule omplete all as specified and directed .
S&F in repair cromium plated 15 mm bore size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule omplete all as specified and directed .
S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with fancy type screwed both ends for iron or for union omplete all as specified and directed .
S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.
S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified.
S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.
S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement omplete all as specified and directed .
S&F in repair ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement omplete all as specified and directed .
Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.
S&F in repair Brass chromium plated shower rose 125mm size omplete all as specified and directed .
S&F in repair CP brass soap dish complete all as specified and directed .
S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms)omplete all as specified and directed .
Supply and fix in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed.
Supply and fix in repais 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.
Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.
Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.
S&F 110mm PVC (SWR) vent cowl omplete all as specified and directed .
S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof omplete all as specified and directed .
S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair)omplete all as specified and directed .
S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia.fixed in repair) omplete all as specified and directed .
S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair omplete all as specified and directed .
S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No- F-74 0022 or equivalent in PS
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long omplete all as specified and directed .
S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed.
Supply and fixing PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 32mm bore suitable for wash hand basins/sinks complete all as specified & directed
M&L for post construction anti termite treatment of the soil under plinth protection at the rate of 5 litres of emultion per square meter of surfaces area omplete all as specified and directed .
Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.
M&L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 200ml per 50 kg weight of cement bag finised even and smooth without using extra cement on roof surface when concreate is green and wall omplete all as specified and directed (Note :-WPC measured and paid seperately as supply only rate under respective item of BOQ).
Material & Labour for 50mm thick average thickness of PCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates) all as specified and directed.
Supply only liquid water proofing liquid omplete all as specified and directed
M&L for applying one coat of bituminous /polymerized primer conforming to IS-3384 @.30 Ltr/sqm and applying of one coat of bounding material using blown type bitumen confirming to IS 702 grade 85/25 @ 1.20Kg/sqm and laying of APP modified men frame pre fabricated reinforced with non woven polyester of 3.50kg/sqm (minimum), 3mm thick(minimum with minimum 75mm side overlaps and 100mm end overlaps and applying one coat of bituminous aluminum paint over APP membrane complete all as specified and directed.
M&L for repair to overhang portion of chajja, facia, drop wall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with cement mortar 1:3 after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account) complete all as specified & directed.
M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in any type of soil complete all as specified and directed .
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in soil complete all as specified and directed .
Removal of excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed .
S&F in repair Ready Made Precast reinforced cement concrete 1;2;4 type B1 using 20mm grade stone aggregate, factory made maanhole covers of size 450x900x50mm thick , set in cement mortor 1;6 all as specified and directed .
M&L for 150mm Ultra P EDWC (Double wall corrugated) pipe and all necessary fittings and fixtures complete all as specified and directed.
M&L Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150mm bore pipes complete all as specified and directed .
Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and forming benching as required. Internal dia of pipe 150mm complete all as specified and directed .
M & L for construction of Soakage wells , of size 2.40m dia & 6.00m depth ( effective depth 4.5 m ) in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed brick work including intercepting chamber, screen chamber Brick work in CM 1:4, RCC cover slab in M-25/ RR masonry / Filling with brick bats, all as including necessary earth work in any type of soil (soft / loose / hard / dense) all as shown on drg No TD-309 Sh. 1/4 to 4/4. complete all as specified and directed.
M&L for construction of septic tanks, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., for 50 users including necessary earth work in any type of soil (soft / loose / hard / dense) all as shown on drg No TD-217 sheet 1/7 to 7/7 complete all as specified and directed.
M&L Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed .
Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified & directed.
Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for One tube light/ Bulb/ street light point controlled by one, one way switch 05 / 06 Amps.
All as per Srl item No 108.00 here-in-before but One fan/exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified & directed.
All as per Srl item No 108.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified & directed.
All as per Srl item No 108.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified & directed.
All as per Srl item No 108.00 here-in-before but One Bell point controlled by one, one way switch 05 / 06 Amps complete all as specified & directed.
All as per serial item No 108.00 here-in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified & directed.
All as per serial item No 108.00 here-in- before but with 4.0 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified & directed.
S&F switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.
S&F in socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.
S&F of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed. of make Cona/Legrand/SSK.
S&F in switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.
S&F stepped type type electronic fan regulator flush type complete all as directed
S&F bell push flush type , 5 amps , 240 volts make Plaza/Cona/SSK complete all as specified & directed.
S&F call bell,AC , 230 volts ,Single poler Cona/Anchor complete all as specified & directed.
Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed .
Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate all as specified and directed.
Supply and fixing LED lamp 2 pin 9/10 watt. omplete all as specified and directed
Supply and fixing LED light fitting 1x22/25 watt,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high output diffuser 2 feet,10 watt 220V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copeer conductor cable of suitable size complete all as specified and directed.
Supply and fixing 1x36/40W LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed.
Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including taking down old u/s wiring & incl all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.
S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in -charge.
S&F MCB, SP, AC, 240 volts 'C' curve capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.
S&F Double pole Isolator 240V, 40A, and making connections complete all as specified & directed.
S&F TPN DB, 4 way, 415 V, double door type suitable for mounting incoming and outgoing MCB’s double pole/single pole,complete all as specified and directed.
S&F in repairs, TPN MCB 100 Amp, 50 Hz, 415 V with rupturing capacity 10KA 'C' curve ISI Marked, and making connections complete all as specified & directed.
Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.
Supply and fixing fan ceiling complete with blades, down rods, electronic regualator and accessories ,230V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE.Five Star rated with Brushless direct current motor (BLDC) complete all as direced.
Shri Kanchan Engineers
vibha associates
mohanlal gupta
Gupta Automobiles
SA construction co.
Manglam Engineers and Construction Co
M/S AMAR ELEKTRO CENTRE
Rajneesh Jain
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .