SPECIAL REPAIR TO BLDG NO P-32 AT AF STATION SONEGAON

Amount

Demolition of plain cement concrete in ground floor and paving not exceeding 15 cm thick below or above ground level including removal up to a distance exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed.

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter (without taking of shutter from framed) complete including removing from site complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n.exc 4 Sqm each with shutter (without taking of shutter from framed) complete including removing from site complete all as specified and directed.

Taking up or down steel tubing and connection of 15 mm dia bore complete all as specified directed at site.

Taking up or down steel tubing and connection of 20 mm dia bore complete all as specified directed at site.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for brick work with flyash bricks straight or curved on plan to any radius in half brick wall built in CM (1:4) Complete all as specified and directed.

M&L for brick work with flyash bricks, straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as directed at site complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using WPC on wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note;-WPC shall be measured and paid seperetly .

M&L for 10 mm thick cement plaster in cement mortar 1:3 as in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

S&F in repair 10 ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed.

S&F in repair 15mm dia angle stop valves cast copper alloy fancy type,chromium plated complete all as specified and directed.

S& F in repair toilet paper holder of brass, chromium plated or stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F in repair tubular towel rail 20mm dia brass chromium plated, D type, 60 cm long between flanges complete all as specified and direcetd

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and abs wall hook including making connections and fixed in position complete all as specified and directed.

S&F in replacement of 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) White colour hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Disconnecting existing tank of capacity exc.500 & n.exc 1000 ltrs, setting aside lowering if required for repairs, cleaning and removing all scale and dirt from tank and mouth of pipe etc and hoisting if required reconnecting and refixing in position complete all as specified and directed.

S&F in repair for PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and directed.

S&F 15 mm bore tubes, medium grade' galvanised, with all fitting as socket, elbow,nipple,union etc and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed.

S&F 20 mm bore tubes, medium grade' galvanised, with all fitting as socket, elbow,nipple,union etc and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed.

S&F in repair 20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete complete all as specified and directed.

S&F in repair, 15mm bore bib taps cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S & F in repair 15 mm dia pillar taps, fancy type , chromium plated, screwed down high pressure with long screwed shanks and fly nuts, serewed for iron pipe & fixed complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, bed plate etc complete all as specified and directed.

M&L for 2nd class hard wood plain,solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed complete all as specified and directed.

M&L for 25mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with one face is covered with deco rative face veneer with lipping/frame to match complete all as specified and directed.

S&F mild steel works as in small articles like hold fasts, conforming to Fe-290 or Fe E-165 complete all as specified and directed.

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube,fixed in opening all as directed.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement and fixing in the frame at site complete all as specified and directed.

S&F extruded aluminium alloy butt hinges 100mm size type B-21 complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and directed.

S&F aluminum handles cast type anodize 150 mm long complete all as specified and directed.

S&F 300mm long aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed complete all as specified and directed.

M&L for two coats of synthetic enameled paint over one coat of pink primer on new wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of new surface complete all as specified and directed.

M&L for two coats of synthetic enameled paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface complete all as specified and directed.

S&F in repairs for shower rose chromium plated with or without swivel joints 125 mm dia complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered surfaces on wall including preparation of the surface, complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered surfaces of ceilings including preparation of the surface, complete all as specified and directed.

M&L for preparation of old decorated surface of walls by brooming down and wire brushing etc and applying one coat of white wash on wall complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash to ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of old surfaces by complete removel of existing treatment and applying two coats of cement based paint on walls complete all as specified and directed. .

M&L for complete removel of existing old treatment including plaster over the slab and roof treatment with following specifications :- (a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab. (b) M&L for screed bed 10 mm thick in cement mortar 1:3 on roof/terrace /parapet wall or concrete surfaces finish even and smooth without using extra cement with liquid WPC as per manufacturer instruction all as specified and directed. (c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface. (d) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per Sqm including cleaning surfaces all as specified and directed. (e) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface of roof /terrace and parapet wall by torch application method and joint seald properly and location of drain pipe to be treated properly . Overlaping shall be 100 mm on length and width both side of APP membrane and as per manufacturers instruction complete all as specified and directed. (f) Applying two coat of aluminium paint @100 gm/Sqm over bituminous surface of membrane. Note: (a)Water ponding for 24 hours to be carried out after laying of APP membrane sheet. (b) Supply only WPC shall be measured and paid separately under relevant item.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM (1:4) for backing of tiles complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for Glazed colour ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for Non- skid colour ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete without glazing bars complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate bedding of tiles/Kota stone complete all as specified and directed.

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including making good with PCC (1:2:4) complete all as specified and directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including making good with PCC (1:2:4) complete all as specified & directed.

S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified and directed.

S&F PVC (SWR) bends 75 mm bore of any radius complete all as specified and directed.

S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door complete all as specified and directed.

S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement complete all as specified and directed. .

S&F 110mm dia PVC (SWR)WC connector with lip ring complete all as specified and directed.

S & F in repair vitreous china wash basin, white, flat bock, size 550 x 400 mm including bracket fixed to wall complete all as specified and directed.

S & F in repair Vitreous china wash water closet pan ( Pedestal pattern) white fixed in floor including trap, connecting to drain ( or outgoing pipe ) and flush pipe, anti syphonage pipe, flush pipe to pedestal pan including all joints etc. complete all as specified and directed.

S&F Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) including PVC waste pipe 1 m long complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 to repair on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded stone aggregate including scafolding work for double/single storied bldgs complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 Type C-2 using 40mm graded aggregate as in plinth protection and path etc finished cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over and including 15 mm thick cement mortar 1;6 cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for granite of any type tiles 20mm thick in steps,jambs,pillars,cooking platforms,and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar locations complete all as specified and directed.

Dismantling of false ceiling (Fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets removal from premises of MOD Land complete all as specified and directed.

Demolition of stone slabs laid bedded and pointed in any cement mortar including bedding (but not backing) of any description or thickness in floors/skirting, aprons etc and removal of rubbish/debris from premises of MOD land complete all as specified and directed.

S& F gypsum ceiling board for ceiling prepainted perforated finish 600X600X9 mm thick in size of approved brand/make, laid over and including grid work of size 605X605 mm , made out of 0.5 mm thick GI tee 32X24 mm for main, 25X24 mm fro cross tee and 24X24 mm angle fixed on wall, powder coated finish on expossed faces of tee and angle, hung from ceiling using 2mm dia GI suspension wire fixed with adjustable clip spaced at 1200 mm on main runners including making niches for fan/light complete all as specified and directed.

Demolition of reinforced cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including removal upto a distance exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams,lintels, chajja, cantilevers,etc complete all as specified and directed.

M&L for RCC Type B1 1:2:4 using 20mm graded stone aggregate as in Chajjas etc complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required including craking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality conforming to IS complete all as specified and directed.

S&F factory made uPVG white colour Sliding window Three track area exc 2.00 sqm made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories,complete all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.

M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per Item No.92 Above but in vertical surfaces such as skirting/Dado complete all as specified and directed.

M&L for preparation of old plastered surface after complete removal of existing treatment and applying two coat of oil bond distemper white or any tint over a coat of primer after preparation of wall surface with Birla/Asian 3.00 mm wall Putty all complete all as specified and directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

M&L for preparation of old treated surface of walls, edges of slab, roof, chajja projection, column etc and applying one coat of Weather Proof Exterior Acrylic emulsion paint of electric blue or AF blue colour and shade as approved by AGE, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 38/40mm dia waste pipe complete all as specified and directed.

M&L PVC(SWR) pipes 110mm dia single socketed, in any length with rubber ring joints,laid in trenches complete all as specified and directed.

M&L PVC(SWR) pipes 75mm dia single socketed, in any length with rubber ring joints,laid in trenches complete all as specified and directed.

S&F in repair stack clamps out of 75 mm X5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F in repairs stack clamps out of 100 mm X 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

Taking down carefully copper/aluminium point wiring any type ,surface/concealed/ PVC capping or tubing ( including light,fan,s/socket, or power)complete including fixtures and fittings such as switches,ceiling rose,pendents,regulators,sockets etc complete all as specified and directed.

Taking down old unserviceable main switch board, DB of any type and capacity from its location with accessories MCCB's/MCB SP/SPN/TPN complete all as specified and directed.

Taking down old unserviceable tube light/CFL light/recessed mouted light or any type of light fittings complete all as specified and directed.

Taking down old unserviceable exhaust fan any capacity complete all as specified and directed.

Taking down old unserviceable Sub Main wiring any type any capacity including conduits from its location & making good of distrube surface complete all as specified and directed. .

Taking down old unserviceable surface mounting fixed cable 3.5 core16/35/50/70 sqmm or any capacity complete all as specified and directed.

M & L for PVC concealed conduit point wiring with 1.5 sqmm single core 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including MS pressed steel shet sunk box with 1.2 mm thick ISI marked laminated bakellite sheet fixed with cromium / nicckel plated screws and washers for switches and sockets, including 1.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area with cement mortar 1;4 and white wash/colour wash to matching with the existing colour and complete all as specified and directed for the following;-

One light point controlled by one switch complete all as specified and directed

One Exhaust Fan controlled by one switch complete all as specified and directed

One three pin 5 Amps switch socket outlet on independent board complete all as specified and directed

One three pin 5 Amps switch socket outlet on same board complete all as specified and directed

All as per item No 109 above but point wiring with 2.5 sqmm multistrandard copper cable for 5 pin 15 Amp switch socket combination on Independent board with one run of 2.5 sq mm multistranded copper cable green colour for earth continuity conductor complete all as specified and directed.

S&F switch piano, flush type single pole,5 Amps, 240 Volts AC complete all as specified and directed.

S&F ceiling rose surface backlite, 65x50mm, three terminals, 5 Amps,240 Volts AC complete all as specified and directed

S&F switch socket combination 5 Pin,5 Amps,240 Volts, flush type complete all as specified and directed.

S&F switch socket combination 2 IN 1, 3 pin,5 and 15 flush type universal ,240 Volts, complete all as specified and directed.

Supply and fix LED tube light fitting capacity 20 watt fixed on wall/surface / ceiling with all accessories tube,driver,with surge protector completerewired with multistranded copper cable & connecting to ceiling rose with 3 core ,multistranded flexible copper cable complete all as specified and directed. Make : CGCta No-LDL-20-NW/wipro/CG/Havells/philips/Bajaj.

S& F 36 Watt Recess LED perforated single window modern designated enabled by advanced LFD light. It blandes into ceiling plane & maintain uniform luminance across aperture to enhance visual comfort ceiling tile provided with a drop down acrylic diffser suitable for Size 600X600MM ceiling incluiding extra frame for fixing at POP/ Gysum Ceiling mounted version including LED light complete. The 36W system shall be operating at 220-240v AC supply having internal driver. IP20, surge protection 2KV, ambient tempretaur (-) 20 to 45 degree C, frequency 50 to 60 Hz.PF should be greater than 0.95. THD< 10 % . Individual LED should not be visible for glare free output, and connecting upto tube light fitting with connecting up with copper 3 core flexible cord of minimum sisze 1.5 Sqmm size and testing complete all as specified and as directed.

Refixing of cable any size any capacity upto 70sqmm fixed on wall/trench with clamps & saddle properly complete all as specified and directed retrived from Item No 108 complete all as specified and directed.

Supply and fix concealed sub main wiring with two single core cable of 6 sqmm PVC insulated , 1100 volt grade as per IS 694, with multistranded copper conductor in and including rigid PVC conduit (ISI Marked) medium grade including earthing wire of PVC insulated stranded 6 sq mm cable ,chess cutting including 20 mm dia PVC conduit medium grade with lbow,bends,couplers,tee, sucken boxes pressed steel box mounting fitting/junction boxes etc covered the conduit with cement mortor after drawing of electric cables and makig good of distrubed surfaces with cement mortar 1;4 and match with existing shade of wall/roof complete all as specified and directed.

Refixing of DB's including all existing isolator/MCCB/MCB safly as per the directed by AGE retrived from Item no 104 complete all as specified and directed.

Refixing of Exhaust fan any type any make any capacity complete retrived from item no 106 complete all as specified and directed. .

M & L for disconnecting outer & inner unit of Air-conditioning icluding Voltage stablizer unit of any capacity including cutting of copper tubes including shifting of outer unit from roof of the building with provision of angle iron anchor pickets made out of 25mmX25mmX5mm angle iron with suitable size of MS plate with installation of outer & inner unit of AC with the suitable space for further maintenance including necessary gas charging / topping up R-22 /R32/410C with soldering of copper tubes complete all as directed.

S&F semi grouting industrial socket & plug powder coated made of CRCA sheet complete box comprised with MCB, SP 32 Amp 10 KA reputuring cap complete all as specified and directed. .

karambir constructions

M/s Shrangi Rishi Construction

chronicle enterprises

M/s Rahul Traders