Construction of Gym Club at Sadargachh within Bidhannagar 2 GP Sl.No.110(25-26)

Earthwork in excavation in foundation trenches in all sorts of soils including removing the spoils within the lead of 75m as directed.Depth upto 1.5m

Earthwork in filling foundation trenches and plinth with the earth obtained from the excavation of foundation trenches or carried earth/sand in layers not exceeding to 150mm as directed including ramming,dressing etc. all complete.

Single Brick flat soling to proper camber, hand packing, spreading powdered earth/sand in the interstices including watering, ramming etc. complete.

(1:3:6) P. C.C. with 30mm down bazree with materials supplied at site excluding shuttering.

125 mm thick First class brickwork with cement mortar (1:4)

Labour for shuttering with centering with approved stout props and thick hard wood planks of approved thickness including fitting, fixing and striking out after completion of work. Above Plinth Level

Ordinary cement concrete (mix 1:2:4) with graded stone chips 20mm down excluding shuttering and reinforcement, if any. River Bazree

Reinforcement for R.C. works in all sorts of structures including initial straightening, cutting to requisite length, placing in proper position, bending and binding with 16 gauge black annealed wire at every intersection complete.

Plastering to wall,ceiling,floor etc with Sand cement plaster work with materials supplied at site.

Neat cement punning in wall/dado, window sills, floor drain etc. in all floors

a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality ….papering etc.

(b) Priming one coat on timber or plastered surface with synthetic oil..quality including smoothening surfaces by sand papering etc.

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.two coats

A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other two coats

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made)

(B) Dressed wood work in post , plate , battens . etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals) (i) Sal : Siliguri. Door

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing &etc…make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.i) For roof truss works a) Span up to 12 Mtr.

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately (b) 40mm X 6mm, 200mm Length

(Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (iii) 75mm. X 40mm. X 1.12mm

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(iii) 100mm long x 10mm dia. Bolt

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete (i) 250mm x 16mm dia bolt.

Anodised aluminium grip handle with base plate of approved quality fitted and fixed complete.(a) With base plate (i) 165mm grip x 12mm dia rod x 42mm plate x 3.2mm thick

Cement Concrete Chairs Supply transportation and all complete

Add CGST & SGST @ 18%

Labour welfare cess @ 1%