REPAIR/MAINTENANCE OF FLOORS, WALLS, WOODEN CUPBOARDS, KITCHEN CABINET, CURTAIN RODS, SANITARY ITEMS AND OTHER CONNCETED ITEMS AT SMQ AREA OF AF STN DIGARU.

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for for non skid joint free coloured ceramic tlle 7 to 8 mm thick (square or rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match with and incluiding 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for glazed ceramic coloured in vertical surface 300X200X7/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white/coloured cement to match with and including 10 mm th backing coat in CM (1:4) complete all as specified & directed.

Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc. laid bedded & pointed in any mortar complete all as specified and directed.

M/L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specified and directed.

M/L for pre polished Chequered cement concrete tiles 30cmX30cmX25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.

M&L for Hardcore of broken stone boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15cm thickness (Below or above ground level) un-reinforced complete all as specified and directed.

M&L for 100 MM thick PCC 1:2:4 type B-1 using 20 mm graded aggregate as in floors complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of brick work in cement mortar incl all quions, arches, pillers etc. but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with sub class b bricks strait or curved on plan exceeding 6 M mean radius built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. complete all as specified and directed.

M&L 15 mm rendering in CM 1:4 on on other than fair faces of brickwork or concrete surafaces complete all as specified and directed.

M&L for preparation of newly plastered surface and applying two coat of oil bound distemper over a coat of alkali resistance primer over 1 mm thick wall care putty complete all as specified and directed.

Taking down shutter of any description area not exceeding 1 sqm each complete all as specified and directed.

All as per Item No 19 above but area exceeding 1 sqm and not exceeding 2 sqm each.

M&L 25 mm thick plain framed pannelled shutter (any number of panels) with panel of timber flat on both sides (feather edged) or of veneered particle board medium dencity, wood particle board with commercial face veneers supplied to fitted to chowkats complete all as specified and directed.

S&F 25mm thick Flush shutters, solid core construction with block board core and plywood face panels, commercial type on the both side complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for 12 mm prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber framework complete all as specified and directed.

S&F aluminium, 75 mm long aluminium anodised Hasp and staple, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F 75mm stainless steel butt hinges complete all as specified and directed.

S&F 40 mm dia, cupboard knobs, brass polished fixed with nut and screws and washer of mild steel, bright finished complete all as specified and directed.

S&F in repair vitreous China wash basin (flat back) size 550X400mm, Ivory colour,with and including vitreous china pedastal/stand complete all as specified and directed.

S&F in repair for pillar tap 15 mm diacast copper alloy fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair of 32 mm waste coupling of PTMT (half or full threaded) (minimum weight 32 mm-45 gms) complete all as specified and directed.

S&F in repairs Vitreous china (white) wash down water closet pan (pedestal pattern) EWC with 'P' & 'S', trap front or back inlet and foot rests, any pattern incl PVC seat cover (excluding flushing cistern and flush Pipe) including provision of lime concrete complete all as specified and directed.

S & F 10 Litres, PVC valve less, symphonic action type, Flushing Cistern, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes fixed complete all as specified and directed.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections complete all as specified and directed.

S&F vitrous china box type, coloured, toilet paper holder fixed to wall with chromium plated (CP) brass screw complete all as specified and directed.

S/F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F Towel rail 600mm long 20 mm dia of CP fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair 15mm angle valves cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fix in repair soap dish, vitrous china white approximate size 160x160x90mm complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F decorative type 20 mm dia curtain rod , anodised aluminium alloy with fixing brackets,stops, rollers (decorative type) complete all as specified and directed.

M/S Vimal Enterprise

M/S B.H. ENTERPRISE

M/s Ravi Enterprise

FRIENDS ENTERPRISE

M/S TRADE CENTRE

M/S DAS CONSTRUCTION

M/S. SUBHAS CONSTRUCTION CO.