Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC PO PS JANG DISTRICT TAWANG ARUNACHAL PRADESH 790104 | JANG | TAWANG | ARUNACHAL PRADESH | 790104 | L1 | Accepted-AOC BEING L1 AND REASONABLE | |
| 2 | L2₹40.9 L+₹3.8 L (10.1%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹42.2 L+₹5.0 L (13.6%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
4 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh A K Dubey, IDSE , SE CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
PROVN OF STAND BY AC IN BLDG NO P-01 (OT) AND BLDG NO P-11 (ICU) AT COMD HOSP (NC) UNDER GE (UTILITIES) UDHAMPUR
2022_MES_551067_1
CWE/U(U)-61/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Udhampur
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE (U) Udhampur
₹76,000
8 Oct 2022
9 Sept 2022
6 Oct 2022
9 Sept 2022
4 Oct 2022
22 Sept 2022
Amount
Supply,installation,testing and commissioning of Variable Refrigerant Flow modular type air conditioning system suitable for Cooling & Heating both by multiple scroll compressor controlled by individual inverter complete with indoor and outdoor units with individual wired and wireless/wired remote controller for indoor units and centralized controller,interconnecting refrigerant piping, full charge of refrigerant gas (R-410A) & oil, internal control cabling and fittings and Outdoor unit connecting kit etc as per details given inspecifications and having following items. The outdoor units shall be suitable for 3 phase 4 wire system, 415V+10%, 50Hz AC supply and indoor shall be suitable for Single phase 220-240V, 50 Hz AC supply. Outdoor Units Supply, installation, testing & commissioning of Modular type outdoor units equipped with highly efficient scroll compressors (OEM manufactured) fully inverter controlled i.e. change sits speed in accordance to the variation in cooling loads , special heat exchanger, low noise condenser fan, & including full charging of R-410A refrigerant gas complete/ powder coating complete as per specifications. Outdoor units shall be provided with MS stand of suitable size duly painted with corrosion resistant paint suitable for outdoor application.
20 HP VRV Outdoor unit
16 HP VRV Outdoor unit
Supply, installation , testing & commissioning of Hi wall mounted unit having uniform air flow with Cordless Remote controller suitable for above indoor units to operate, monitor, ON/OFF, temperature setting air flow changing etc & includingg 15 Amp ISI marked top . The remote controller shall be wall mounting with bracket as following capaity as per OEM complete all as specified and as directed by Engr-in-Charge :-
2 TR HI wall type unit
1.5 TR HI wall type unit
Supply, installation , testing & commissioning of variable refrigerant 'Y' joint required for distribution of refrigerant in copper piping etc . Complete as per specifications flow distribution REFNUTS (Y – Joints) in the suction & liquid lines complete all as specified and as directed by Engr-in-Charge .
Supply, installation , testing & commissioning of refrigerant copper piping insulated with 19 mm / 13 mm thick Nitrile rubber of following sizes between outdoor unit to indoor units as per the specifications complete all as specified and as directed by Engr-in-Charge . The refrigerant pipe shall be hard drawn /soft drawn copper pipe as per manufacture recommendations. The quantity of these items of works recommendations. The quantity of these items of works shall be measured as per actuals requirements of site conditions. The vendor shall accept the accepted rate as per the actual measured quantities.The size of refrigerant pipes shown below are tentative.The required size of pipe shall be designed by the vendor as per the manufacturer recommendations. Note : (a) Cable/pipe tray for hanging pipe on wall shall be deemed to be included in the rates quoted by the Contractor. (b) Taking down and refixing of false ceiling (supply & fix new ceiling if required) for fixing of copper tubing on wall/ceiling shall be deemed to be included in the rates quoted by the Contractor.
41.28mm OD ( insulation 19 mm thick )
34.0 mm OD ( insulation 19 mm thick )
28 mm OD ( insulation 19 mm thick )
22 mm OD ( insulation 19 mm thick )
19.0 mm OD ( insulation 19 mm thick )
15.9 mm OD ( insulation 19 mm thick )
12.7 mm OD ( insulation 13 mm thick )
9.5 mm OD ( insulation 13 mm Thick )
6.35 mm OD ( insulation 13 mm Thick )
Supply, laying , testing & commissioning of following sizes PVC drain water / fresh air arrangement pipe including bends, collars & elbow etc, all complete and duly insulated with 9 mm thick tubular insulation of closed cell elastomeric nitrile rubber as required complete all as specified and as directed by Engr-in-Charge:-
32 mm Ø PVC
Supply and laying of 4C x 25 Sq.mm XLPE Insulated, cores laid up,tape PVC inner sheathed, round armored aluminium conductor power cable of 1.1kV grade as per IS -7098 complete all as specified and as directed by Engr-in-Charge .
Supply and laying SITC of cabling work between outdoor & indoor units of 2C x 2.5sq mm copper cable including concealed PVC casing caping with all fittings and including cutting chases to wall making good match with the existing specification complete all as specified,(ISI Marked)as directed by Engr-in-Charge .
M & L for Point wiring for 15amps socket point with 2.5 sqmm PVC insulated unsheathed copper conductor single core multistrand fliexible cable and 1.5 sqmm PVC insulated copper conductor for single core cable (green colour ) as earth lead in and including concealed PVC casing caping with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engr-in-Charge & 3mm thick laminated sheet including cutting chases to wall making good match with the existing specification complete all as specified and as directed by Engr-in-Charge . Note :- Point wiring shall be taken from Control Panel to Indoor unit indipendently.
S&F switch socket combination 2-in-1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed by Engr-in-Charge .
M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600mm x 6mm thick buried directly in ground ( earth pit not less than 2.25 metres deep below normal ground level ) with top edge plate not less than 1.5 metre below normal ground level connected to galvanized earth strip of size 32x6mm as earthing lead by means of bolts, nuts, chuck nuts and washers of galvanized iron earth lead including PCC pit in PCC 1:2:4 type B-1, RCC cover made out of cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with TMT steel bars 8 mm dia @150 mm c/c both ways with suitable handle and angle iron 40x40x5mm frame, GI medium grade watering pipe 20mm bore and funnel with wire mesh, light grade protection pipe 40mm bore up to main board complete as shown on electrical plate No 3 of MES Sch 2009 (Part-I) and testing on completion complete all as specified and as directed by Engr-in-Charge .
Supply and fixing earth continuity conductor main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to pole or any other indicated situation for loop earthing etc, as required 32x6mm dia galvanised iron strip complete all as specified and as directed by Engr-in-Charge.
Supply and fix of LT panel outdoor type weather proof panel floor mounted on 60 cm long legs made out of 40X40X6mm angle made of complete CRCA sheet on 3.15mm dust and vermin proof duly powder coated and wired as per standard engineering practice, the panel manufacturer should have got any one of the panel tested at CPRI earlier and similar design and technology shall be adopted for fabrication of panel. The panel shall be comprising of following accessories :- a) MCCB 63 Amps 4 pole with abjustable.-01 No (b) Copper bus bar 4 strip as per 350 Amp rating. (c) MCCB 40 Amps 4 pole - 02 No (d) SPN 25 Amp - 20 Nos (f) Digital Ammeter 0 to 100 Amps. (g) Digital Voltmeter 0-500 volts. (h) Phase indicator. (j) Complete wiring of panel board with appropriate current rating flame retardant PVC insulated copper conductor multi- strand cable for panel instrument incomming / outgoing MCCBs with suitable thimble -01 Job Note:- Panel should be designed & manufacture by L&T, Schinder, ABB or equivalent channel partner of as mentioned Makes as approved by GE.
M&L for 4mm thick non-asbestos fibre cement building boards fixed of laid inserted to timber / GI / Aluminum framework with screw as in ceiling including 605x605mm GI frame work for seamless ceiling consisting of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm center to center / intermediate channel 0 9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm center to center with Gl cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm center to center, Hangers 6mm dia GI ( upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat iron 40x30mm size 60mm long and expansion hold fasteners 12.5 dia 40mm long and preparation of new surface of ceiling and applying two coat of oil bound distemper over and including a coat of primer complete all as specified and directed by Engr - in Charge.
M/S Builders Indias
PREM NATH KHAJURIA AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .