Perparation of Restoratoin of Roads at Thudiyalur Road with Strom Water Drain and Street Light Arrangements to the Thudiyalur Bus Shelter in Ward No.1, North Zone.

Amount

Dismantling - Dismantling RCC by manual / by using deploying machineries (TNPWD SoR Vol 1 Item no. W-0035 Page no. 30)

Dismantling - Brick / Stone Masonry in lime mortar walls under 3m high (TNPWD SoR Vol 1 Item no. W-0013 Page no. 29 )

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Reinforced Cement concrete 1:1.5:3 (one cement, one and half M.sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.- Manual Mix (sl.no.155)

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3.60m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 FOR DRAIN

Supplying and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. (Sl.No.168)

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed. 100mm thick slab (using 20mm HBGS Jelly)

Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications

Providing and laying Bituminous concrete to 40mm thick using 0.13 cum of 19.00-9.50 mm graded metal and 0.17 cum of 9.50-2.36 mm graded metal and 0.26 cum of 2.36 mm & below metal with 45.27 kgs of 60/70 bitumen & 5.03Kg of Plastic waste (Total-50.30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to C M P site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 40mm / 30mm with mechanical paver to the specified grades and cross sections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen in to bitumen tank and metal to feeder unit,labour for attending to paver site etc., including hire charges and fuel charges for 20-30t C M P with bitumen boiler,tipper trucks, paver finisher, Vibratory rollers and all other tools and plants required, including all other incidental charges etc.,complete using C M P clause 507 of MORTH Rev-5 specifications. (HD - SD.Pg No.311 to 313)

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 60W LED street light fitting with LED (Lower end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour (Electrical SoR TNPWD Item no. SD466)

Supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting. (Electrical SoR TNPWD Item no. SD458)

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good

Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 60 X 60cm in size in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), of best approved quality and as per standard specifications etc.,complete.

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing European Water Closet with “P” or “S” Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 10 litre capacity PVC Low Level Flusing Tank with all internal fittings White

Cement (Considered 0.25 days for fitter class 1 for installation of each EWC)

Crushed Stone Sand (M-Sand) (Considered 1.0days for fitter class 1 for installation of each EWC)

Considered Fitter I class 0.1 days for the installation of each EWC

Supplying and fixing of CP Two Way Bib Cock with Health Faucet

Supplying and fixing Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia ‘B’ Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc White without Pedastal

Considered Fitter I class 0.29 days for the installation of each Wash hand basin

Supplying and fixing of Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia ‘B’ Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc. (Including angle valve) White

Considered Fitter I class 0.76 days for the installation of each Urinal

Supplying and fixing of Special Type Mirror of size 1000 x 780mm

Considered Fitter II class 0.30 days for the installation of each Urinal

Supplying and fixing of Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia

Supplying and fixing of CP Angle Cock Tap

Supplying and fixing of Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia

Collecting and fixing Foam Soap Dispenser with screws, necessary accessories, etc. complete specified in list of makes.

Grab Bar - 300mm Long

P-Trap 110mm dia

Supply and fixing Wall mounted type Hand Drier of 230V, Single Phase AC power suppyl with necessary accessories, etc. complete

Supplying and fixing of CPVC Pipe (Chlorinated Poly Vinyl Chloride) (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio–11 (including fittings) 20 mm dia

Considered Fitter I class 0.70 days for the installation of cpvc pipes cost of 10 meter

Considered Fitter I class 0.70 days for the installation of each cpvc pipes cost of 10 meter

Supplying and fixing of UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure inresidential areas do not normally exceed the maximum tolerance. (Schedule-40) (including fittings) 20 mm dia

Considered Fitter I class 0.70 days for the installation of uvc pipes

Considered Fitter I class 0.50 days for the installation of each upvc pipes

Supplying and fixing of UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure inresidential areas do not normally exceed the maximum tolerance. (Schedule-40) (including fittings)25 mm dia

Considered Fitter I class 0.70 days for the installation of uvc pipes

Considered Fitter I class 0.50 days for the installation of each upvc pipes

Supplying and fixing of UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for residential and home applications, water pressure inresidential areas do not normally exceed the maximum tolerance. (Schedule-40) (including fittings)40 mm dia

Considered Fitter I class 0.70 days for the installation of uvc pipes

Considered Fitter I class 0.50 days for the installation of each upvc pipes

Supplying and fixing of UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure (Schedule-80) (including fittings) 50 mm dia

Considered Fitter I class 0.50 days for the installation of uvc pipes

Considered Fitter I class 0.50 days for the installation of each upvc pipes

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK, size : 20mm ODx1/2”ID, 25mm ODX1/2”ID 20mm (1/2”)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK, size : 20mm ODx1/2”ID, 25mm ODX1/2”ID 25mm (3/4”)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK, size : 20mm ODx1/2”ID, 25mm ODX1/2”ID 32mm (1”)

Gun Metal Gate Valve (Heavy Duty) 40 mm dia

Providing and fixing of G.M. Non Return valves

Providing and fixing of G.M. Gate valves 50mm dia

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc.,complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT. 20mm dia

Supply and delivery of Woltman model with removal mechanism water meters, (No domestic use) conforming to ISO 4064 part I, II, III Class B and IS-2373 with life cycle test certificate from FCRI/ NABL accredited lab. The watermeter shall have magnetic drivers or mechanical drivers and shall be versatile for installation in any position. The meters shall be hydrodynamically, hydrostatically balanced. The runner, runner chamber, pointers of the meter shall be as per ISO 4064 specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climates.

Core cutting in concrete slab100 mm to 200mm for pipe rooting for suitable dia 100mm to 300mm

Supply and delivery of GI Puddle flange 50mm dia

Supply and delivery of GI Puddle flange 65mm dia

Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineer in Charge. INTERNAL:75 mm diameter (4 kg /c.m² )

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 0.95 days for the installation of uvc pipes

Considered Fitter I class 0.80 days for the installation of uvc pipes

Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineer in Charge. INTERNAL110 mm diameter (4 kg / c.m² )

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 1.0 days for the installation of uvc pipes

Considered Fitter I class 1.0 days for the installation of uvc pipes

Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL & SHAFTS: 75 mm diameter (6 kg / c.m² )

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 0.7days for the installation of uvc pipes

Considered Fitter I class 0.50 days for the installation of uvc pipes

Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL & SHAFTS: 110 mm diameter (6 kg / c.m² )

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 0.7days for the installation of uvc pipes

Considered Fitter I class 0.50 days for the installation of uvc pipes

Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineer in Charge.40 mm diameter (10 kg / c.m² )

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 0.8days for the installation of uvc pipes

Considered Fitter I class 0.6 days for the installation of uvc pipes

Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineer in Charge.50 mm diameter (10 kg / c.m² )

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 0.5days for the installation of uvc pipes

Considered Fitter I class 0.30 days for the installation of uvc pipes

Cast Iron Nahini / Floor Trap with Stainless Steel Grating 100mm x 75mm

Considered Fitter I class 0.15days for the installation of uvc pipes

Supply and Delivery of DWC Structured Wall Polyethylene Piping Systems (Pipe with online/offline coupler and elastomeric sealing ring) with required specials non-smooth external annular corrugated and smooth internal surface (Double wall) (SN 8 Class) for non-pressure underground sewerage, drainage application generally as per IS-16098 (Part-2) type B. 150mm ID SN 8 pipe

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 0.7days for the installation of uvc pipes

Considered Fitter II class 0.4days for the installation of uvc pipes

Supply & Delivery of Circular Inspection Chamber including frame with cover (PP with FRP) with load bearing capacity of 1.5 Tons any where in Tamilnadu made as per EN 13598-1:2020 from 100% virgin Polypropylene (PP) material with antirodent grade having internal diameter of 450mm, to be used in buried drains and sewers for gravity system including testing as per relevant standards. It shall be used for receiving / connecting PVC, uPVC, HDPE pipes or DWC/CI/CLAY/RCC, etc. by using of appropriate transition adaptors. Chamber shall have a base confirming EN BS 13598-1 :2020 of suitable size and riser shaft with suitable height . Chambers shall have either straight channel 110mm and 160mm or two extra inlets of 110mm and 160mm at 90°/270° right and left. All chambers shall come with a prefabricated integrated base with appropriate benching with a gradient of 1-2° and as directed by the Department officers 450 mm internal dia, with 1-inlet/1-outlet 450 mm depth

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 0.1days for the installation of uvc pipes

Considered Fitter II class 0.1days for the installation of uvc pipes

Supply & Delivery of Circular Inspection Chamber including frame with cover (PP with FRP) with load bearing capacity of 1.5 Tons any where in Tamilnadu made as per EN 13598-1:2020 from 100% virgin Polypropylene (PP) material with antirodent grade having internal diameter of 450mm, to be used in buried drains and sewers for gravity system including testing as per relevant standards. It shall be used for receiving / connecting PVC, uPVC, HDPE pipes or DWC/CI/CLAY/RCC, etc. by using of appropriate transition adaptors. Chamber shall have a base confirming EN BS 13598-1 :2020 of suitable size and riser shaft with suitable height . Chambers shall have either straight channel 110mm and 160mm or two extra inlets of 110mm and 160mm at 90°/270° right and left. All chambers shall come with a prefabricated integrated base with appropriate benching with a gradient of 1-2° and as directed by the Department officers 450 mm internal dia, with 1-inlet/1-outlet 625 mm depth

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 0.15days for the installation of uvc pipes

Considered Fitter II class 0.10days for the installation of uvc pipes

Supply & Delivery of Circular Inspection Chamber anywhere in Tamilnadu made asper EN 13598-1:2020 from 100% virgin Polyethylene (PE) material having internaldiameter of 600mm for all depth, to be used in buried drains and sewers for gravitysystem. It shall be used for receiving / connecting PVC, uPVC, HDPE pipes orDWC/CLAY/RCC, etc. by use of appropriate transition adaptors including testing asper relevant strandards Chamber shall have a base confirming on BS 13598-1 :2020 and riser shaft of ID 600mm(±10%).Chambers shall have straight channel 315/ 250/ 200/ 160/ 110mm with two extra inlets 315/ 250/200 /160/110mm at90°/270° right and left.Connections at the base shall be designed to receive/ connect 315/250/200/160/110 mm diameter pipes. The inlet/outlet pipes to be connected with elastomer seal for a flexible connection of pipesaccording toEN 681-1. All chambers shall come with a prefabricated integrated base withappropriate benching with a gradient of 1-2°. and as directed by the Department officers 600 mm internal dia, with 1-inlet/1-outlet 750mm depth

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 0.25days for the installation of uvc pipes

Considered Fitter II class 0.25days for the installation of uvc pipes

Supply & Delivery of Circular Inspection Chamber anywhere in Tamilnadu made asper EN 13598-1:2020 from 100% virgin Polyethylene (PE) material having internaldiameter of 600mm for all depth, to be used in buried drains and sewers for gravitysystem. It shall be used for receiving / connecting PVC, uPVC, HDPE pipes orDWC/CLAY/RCC, etc. by use of appropriate transition adaptors including testing asper relevant strandards Chamber shall have a base confirming on BS 13598-1 :2020 and riser shaft of ID 600mm(±10%).Chambers shall have straight channel 315/250/200/160/110mm with two extra inlets 315/250/200/160/110mm at90°/270° right and left.Connections at the base shall be designed to receive/ connect315/250/200/160/110 mm diameter pipes. The inlet/outlet pipes to be connected with elastomer seal for a flexible connection of pipesaccording toEN 681-1. All chambers shall come with a prefabricated integrated base withappropriate benching with a gradient of 1-2°. and as directed by the Department officers 600 mm internal dia, with 1-inlet/1-outlet 750mm depth

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 0.25days for the installation of uvc pipes

Considered Fitter II class 0.25days for the installation of uvc pipes

Supply & Delivery of Circular Inspection Chamber anywhere in Tamilnadu made asper EN 13598-1:2020 from 100% virgin Polyethylene (PE) material having internaldiameter of 600mm for all depth, to be used in buried drains and sewers for gravitysystem. It shall be used for receiving / connecting PVC, uPVC, HDPE pipes orDWC/CLAY/RCC, etc. by use of appropriate transition adaptors including testing asper relevant strandards Chamber shall have a base confirming on BS 13598-1 :2020 and riser shaft of ID 600mm(±10%).Chambers shall have straight channel 315/250/200/160/110mm with two extra inlets 315/250/200/160/110mm at90°/270° right and left.Connections at the base shall be designed to receive/ connect315/250/200/160/110 mm diameter pipes. The inlet/outlet pipes to be connected with elastomer seal for a flexible connection of pipesaccording toEN 681-1. All chambers shall come with a prefabricated integrated base withappropriate benching with a gradient of 1-2°. and as directed by the Department officers 600 mm internal dia, with 1-inlet/1-outlet 1000 mm depth

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 0.25days for the installation of uvc pipes

Considered Fitter II class 0.25days for the installation of uvc pipes

Providing, fixing, testing and commissioning of Ready made Manhole cover for Inspection Chamber 600MM X 60MM

Earthwork excavation above water level in light or sandy or clayey soils for manhole wells, infiltration wells, suction wells etc. including levelling the site with an initial lead of 10 metres.

Stoneware Gully Trap of size 150mm x 100m with Cast Iron Double Gratings

Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 110 mm diameter (6 kg / c.m² )

(Add buffer for fittings and wastage etc.)

Considered Fitter I class 0.8days for the installation of uvc pipes

Considered Fitter I class 0.7days for the installation of uvc pipes

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation.

Vishnu Infrastructures (BID ID -1550222)