Special Repairs to Primary School Building of KV No 1 at GE (N) Ahmednagar

Amount

Dismantling of stone slab & tiles of any description as in floor,laid, bedded & pointed in any mortar. In any situation etc complete all as specified and directed by Engineer-in-Charge

M&L for mirror polished machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including screed bed 15mm thick in cement and sand mortar (1:4) surface finished even and fair etc including etc complete all as specified and directed by Engineer-in-Charge

M&L Dark shaded Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matcht the shade of tiels over and including screed bed 15 mm thick in cement and sand mortar (1:4) including dismantling etc complete all as specified and directed by Engineer-in-Charge

M & L Digitally printed glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry over and including 10mm thick backing coat in cement and sand mortar (1:3) and pointed in white or colour cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified anti skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level etc complete all as specified and directed by Engineer-in-Charge

M&L for providing 75mm thick plain cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in sub base etc complete all as specified and directed by Engineer-in-Charge

M/L for providing plain cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed by Engineer-in-Charge

M&L for providing plain cement concrete (1:3:6) type C-2 (40mm graded stone aggregate) as in surface channel and drain concrete etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 10 mm thick on stone / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth with using extra cement in chhajja etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:4) finished even and fair without using extra cement with using water proofing compound @ 3% of cement used etc complete all as specified and directed by Engineer-in-Charge

M & L for preparing new plastered surfaces of wall and applying two coats of OBD over a layer of putty surface finished with roller finish on plastered surfaces of wall incl preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for newly plastered, unplastered, RCC surface of wall and applying two coats of cement based paint (any tint) on walls over coat of primer at any height etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old wooden surface and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old steel surface and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

M & L for complete removal of existing treatment of wall and applying two coats of OBD over a layer of cement base putty to get smooth and even surface as required and directed finished with roller finish including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

M & L for complete removal of existing treatment of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for complete removal of existing treatment and prepration washing, rubbing down and stopping and applying two coats of cement based paint (any tint) on walls over coat of primer at any height etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs wash hand basin vitreous China, flat back of size 550 X 400 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as directed. Make : Cat Part No 10004 of Hindware or Cat Part No C0475 of Parryware or equivalent in makes imentioned in list of makes in Appendix `C'

Supply and fixing in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1020 A(Oriental series) of MARC or equivalent make as mentioned in list of make in Appendix `C'

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 of Hindware or equivalent in makes mentioned in list of makes in Appendix `C'

S&F in repairs vitreous China white squatting plate urinal (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed by Engineer-in-Charge

S&F of swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames exc. 1.5 sq. m and n exc 4.00 sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

S & F pressed steel door frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge

M&L for 35 mm thick plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

Supply and fix powder coated aluminium three track window made out of Jindal aluminium sections Nos. 20671, 20672, 20690 & 20668 including 5mm thick plain sheet glass for two shutters including rubber / neoprene beading and locking arrangement,aluminium fabric wiremesh 1.40 mm wiremesh for one shutter etc complete all as specified and directed by Engineer-in-Charge

Supply and fix powder coated aluminium fixed sliding window made out of Jindal aluminium section Nos 20671, 20672, 20690 & 20668 including 5mm thick plain sheet glass rubber / neoprene beading etc complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass ( any thickness size ,quality or description ) from wooden/Steel frames glazed with putty or fixed with beads etc complete all as specified and directed by Engineer-in-Charge

M & L for 3 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

S & F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks ,or galvanised wire staples including necessary beading etc complete all as specified and directed by Engineer-in-Charge

M & L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc including dismantling etc complete all as specified and directed by Engineer-in-Charge

Fixing only 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc including dismantling etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs to false ceiling with 4 mm thick plain non asbestos building 'E' board with decorative finish water proofed on one side fixed on and including powder coated GI fabricated grid of 60 cm X 60 cm made out of main runner of 'T' section of size 32 mm X 24 mm X 0.30 mm, cross runner made out of 'T' of section of size 24 mm X 24 mm X 0.30 mm and alround angular section of size 22 mm X 22 mm X 0.70 mm suspended by 4 mm dia GI wire fixed to roof at 600 mm centre to centre as per manufacturere's instructions and etc complete all as specified and directed by Engineer-in-Charge

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

M&L for screed bed or bedding layer of mortar 10mm thick in cement and sand mortar (1:3) by using WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement to receive water proofing treatment including taking down existing screed bed / plaster etc complete all as specified and directed by Engineer-in-Charge

Material and labour for providing water proofing treatment on roofs, as per manufecturer's instructions and as specified after taking down/out as existing at site :- Note. :- (a) Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.30 ltrs/sqm with roller and allow to dry. (b) Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by thermofusion process as per manufacturers specification including applying one coat of aluminium paint. Make : Super Thermolay of STP / Equivalent in DR FIXIT, FosRoc / Sika Note : Work to be executed through Authorised Applicator

S&F 100 mm size butt hinges medium weight, cold rolled mild steel, and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F 150 mm size aluminium anodised, barrel tower bolts of ex- truded section and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised etc complete all as specified and directed by Engineer-in-Charge

Rough finished circular formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC Type B-1 (1:2:4) using 20 mm graded stone aggregates as in column/pillar complete all as directed including adding WPC as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge Note : WPC will be measured and paid separately.

M&L Pre cast cement concrete as in cover slabs Type B1 (1:2:4) using 20 mm graded stone aggregate etc complete all as specified and directed by Engineer-in-Charge

M&L for Mild steel TMT bars 6 to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers or binders etc complete all as specified and directed by Engineer-in-Charge

M&L for 16mm to 18mmthick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round molding the edge including 10 mm thick backing coat in CM (1:3) jointing & pointing in white cement (1:2 ) using marble dust with admixture of pigment to match the shade of granite rubbing etc complete all as specified and directed by Engineer-in-Charge

M & L for pre-cast cement concrete solid blocks, exc. 10 cm in width type C-1 (1:3:6) using 20 mm graded stone aggregates and setting in cement and sand mortar (1:6) including demolition etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:4) surfave finish finished even and fair without using extra cement etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair stop valve, 15 mm dia, cast copper alloy,screwed down high pressure screwed down high pressure with cruitch or butterfly handle screwed both ends for iron pipe or for unions all as directed. Make:- Cat part No MOR 1320 (Orintal series) of MARC or equivalent in in makes mentioned in list of makes in Appendix `C'

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge

Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all fittings etc complete all as specified and directed by Engineer-in-Charge

Supplying and laying 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with all fittings cetc complete all as specified and directed by Engineer-in-Charge

Supply only integral WPC etc complete all as specified and directed by Engineer-in-Charge

S&F black board for school, education, iInstitutions, super duty Aluminium frame of size 8'x4' made from premium quality writing board of green and white background for chalk and marker writing respectively, divided into two parts as per direction of Engineer-in-charge of make Nechams Ultima Melamina (Non-Magnetic) or equivalent as approved by GE etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 65,970.00 shall be deducted from BOQ on account of schedule of credit

S.k ENTERPRISES

sunway associates

Manak landmarks

M/s Meher Construction

M/S-B.R.SONAWANE

M/s S. R. Constructions

Arihant Construction

M/S MAHESHWARI ENTERPRISES

OM SAI ASSOCIATES

M/s AG PATHAN

Ms. M.D. Auty

M/s. A P INFRA

M/s. DADASAHEB NANA NAVSARE

G. K. Engineering And Fabricators

M/s. N D Karande