8417 WELCOME MAINT AND CETAIN MISC REPAIR WORK LIKE JOINERY, PLUMBING, FLOORING, SUNKEN TREATMENT, ROOF AT OFFICERS MD ACCN AT NGM, OGM, SUBROTO MARG, AICTS, FAFA QTRS UNDER AGE BR-I (SOUTH) PUNE

Amount

M&L for preparation of old decorative surfaces of wall including cornices (plastered or un-plastered) by brooming down and scrapping wherever necessary and applying one coat of white wash, complete all as specified and directed.

All as per item No 1.00 above but two coats, complete all as specified and directed

All as per item No 1.00 above but one coat on ceiling complete all as specified and directed.

M&L for preparation of old decorative surfaces of wall including, cornices (plastered or unplastered) of any description by using sand paper and remove dust and applying one coat of dry distemper of any tint complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing finishing from wall surfaces and preparation of wall surfaces including cornices of any description by using sand paper and remove dust etc. and applying two coats of oil bound distemper over and including a coat of 2mm thck wall care putty, complete all as specified and directed

M&L for preparation of old decorative surfaces of wall including cornices of any description by using sand paper, remove dusted etc. and applying two coats of Oil Bound distemper, complete all as specified and directed.

M&L for preparation of old decorative surfaces of ceilings including cornices of any description by using sand paper, remove dusted etc. and applying two coats of Oil Bound distemper, complete all as specified and directed.

M&L for preparation of old decorative surfaces of walls, roof projection etc and applying one coat of cement base paint of any tint, complete all as specified and directed.

All as per item No 08.00 above but applying two coats of cement base paint including complete removal of existing treatment, complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of alkali resistant primer on walls including preparation of new plaster surfaces, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete al as specified and directed.

M&L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces exc 10 cm width or girth, including preparation of surfaces, complete al as specified and directed.

M&L for preparation of old painted steel surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted steel surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed.

M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth including removing existing treatment completely and applying two coats of Apex Ultima Weather shield paint, complete all as specified and directed.

M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth and applying one coat of Apex Ultima Weather shield paint complete all as specified and directed.

M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth including removing existing treatment completely and applying one coat of luster paint, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of luster paint white or tinted as required, on walls including preparation of surfaces, complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by brooming down and scraping wherever necessary and applying one coat of plastic emulsion paint, complete all as specified and directed.

M & L for french polishing on surfaces of any descrption, exceeding 10 cm width or girth over a coat of wood filler including cleaning and preparation of old wooden surfaces complete all as specified and directed.

M & L for applying two coats of OBD on walls over a coat of priming with chalk whitening incuding preparation of new plaster surfaces complete all as specified and directed by Engr-in-Charge.

M&L for three coats white wash on newly plastered surfaces of ceilings including preparation of new surfaces complete as specified and directed.

Taking down cement plaster on brick/block walling inclduing racking out joints, hacking for key, scrubbing down with water etc, complete as specified and directed.

M&L for 5mm thick plaster in CM 1:3 on concrete surfaces, finished even and smooth using sagol finish on ceiling, complete as specified and directed.

M&L for dubbing coat of average 10 mm thick in CM 1:6 as on stone masonry surface, complete as specified and directed. (Note : This item will be operated where the stone / block masonery wall face is not in plumb or uneven face of stone masonery wall etc.)

M&L for 15mm thick in CM 1:4 plastering on dubbing out / concrete surface using water proof compound @ 3% by weight of cement with spong finishing, complete as specified and directed. (Note :- Water proofing compound shall be measured and paid separately)

M&L for 12mm thcik rendering in CM 1:6 on PCC / concrete block wall surfaces, finished the surfaces with sagol finish, complete as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on PCC / concrete block wall surface, finish with sponge finish to the plastered surface, complete as specified and directed.

Supply only integral waterproofing compound, complete as specified and directed.

S&F in repair of white PVC low level flushing cistern 10 ltrs capacity including all internal fittings & waste coupling and pipes etc , complete as specified and directed.

S&F in repairs PVC connection 60cm long 15mm dia with 2 nos PVC nuts fixed , complete as specified and directed.

S&F in repairs looking mirror of size 600mmx 450 mm approved quality and make, mounted on 6 mm thick plywood commercial as backing and PVC capping on edges complete as directed by Engr-in-charge fixed with wooden plugs on wall with CP brass service & cap washers, complete as specified and directed.

S&F in repairs vitreous china squatting pan orissa pattern size 580x440mm white integal foot rest including supply & fixing 10 liters capacity PVC flushing cistern, low level & flush pipe with and including provision of concrete bedding of suitable mix & water proofing treatment etc complete with and including P trap of 100mm size, complete as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm with brackets, inciuding cutting for & pinning in ends of brackets, including waste fitting of PTMT 32mm dia & brass CP pillar tap fancy type of 15mm dia etc , complete as specified and directed.

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, including 10 litres capacity PVC flushing cistern, low level, white, with inlet, ball valve, float & brackets, including flush pipe, PVC pipe 32mm dia & including plastic water closet seat, black, closed pattern with flat bottom, & cover & MS CP or aluminium hinging device, complete as specified and directed.

S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour, complete all as specified and directed.

S&F in repairs brass Chromium Plated fancy type complete all as specified and directed for following :-

Brass CP mixer for mixing hot and cold water screwed down for iron pipe fixed including with telephonic shower etc complete.

Bib taps brass CP 15mm dia.

Brass CP towel rail 600mm long including brackets.

Brass CP toilet paper holder.

Brass CP towel ring square.

Brass CP pressure adjustable shower with revolving joint.

Brass CP Stop cock, 15mm bore dia with long shank & cup (concealed type)

Soap dish brass Chromium Plated.

CP pillar taps cast copper alloy with capstan head chromium plated fancy type .

Brass CP Two way Bib tap

S&F in repair cascade type (coloured) floor mounted water closet with low level flushing cistern single piece coloured with floor trap, PVC coloured seat cover and connecting pipe etc conforming to Cat Part No. VGS-WHT-81753P180UFSMZ of Jaquar complete all as specified and directed by Engr in charge. (Make : Parryware / Aquarius or equivalent make as approved)

S&F in repairs CP health faucet with two way CP tap, complete as specified and directed.

S&F in repair Jet spray stainless steel screwed down for iron pipe fixed including all GI fittings etc , complete as specified and directed.

S&F in repairs stainless steel plate rack of standard size 39"X36"X8", complete as specified and directed.

S&F in repairs stainless steel sink 1.00 thick for kitchen or laboratory with plug waste pipe washers including cantilivers cast iron brackets connecting union etc over all size 495mmx420mm with bowl size 410mmx330mmx160mm, complete as specified and directed.

S&F 40 mm dia PVC HDPE pipe fixed to walls or laid under floor with fittings etc , complete as specified and directed.

S&F PVC flexible waste pipe 32mm bore of suitable length, complete as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description from wooden / iron frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beadings in square not exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repair for stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.4mm and fixed with stanless steel stepple to wooden / steel frames, complete all as specified and directed.

S & F in repair 20mm dia aluminium powder coated curtain rods with fixing fancy type bracket, stops etc including taking down old one complete all as specified and directed by Engineer-In-Charge.

S&F in repair curtain rod 20mm dia bracket, complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings not exc. 15 cm thickness (below or above GL), complete all as specified and directed.

Demolition stone slab / tiles of any description or thickness, laid, bedded & pointed in cement mortor in floors, hard standing & apron etc, complete all as specified and directed.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC design mix Gde C-5 exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified & directed.

M&L for 75mm thick PCC 1:3:6 type C1 (20mm graded stone aggregate) as in plinth protection,path etc laid in pannels including finished the surface smooth and even without using extra cement, complete all as specified & directed.

M&L for Vitrified coloured tiles 10 mm thick (square / rectangular) polished area of each tiles exceeding 0.16 Sqm but not exc. 0.36 Sqm in floors, set an jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed in CM 1:6, complete all as specified & directed.

M&L for joint free non-skid ceramic coloured tiles 7 to 8 mm thick area of each tiles exceeding 0.11 sqm but not exceeding 0.18 etc.in floors, set an jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed in CM 1:6, complete all as specified & directed.

M&L for glazed ceramic tiles of size 300mmx600mmx7mm thick as in wall surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles with and including 10mm thick backing coat in CM 1:4 & filleting at top etc, complete all as specified & directed.

M&L for 16-18mm thick Granite (of any type / colour) work (table rubbed and polished) as in steps, jambs of pillars; window cills, cooking platforms and door frame, photo frame design on doors / windows, counters of any radious etc. and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for machine cut cuddappa stone slab 20 to 25 mm thick as in making cooking platform etc. laid over and including 15mm screed bed in CM 1:4, complete all as specified & directed.

M&L for rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified & directed.

Taking down chowkats or frames wooden / steel with shutters (without taking off shutters from frames) not exc 1.5 Sqm each, complete all as specified & directed.

Taking down chowkats or frames wooden / steel with shutters (without taking off shutters from frames) exc 1.5 Sqm and not exc 4 Sqm each, complete all as specified & directed.

S & F in repairs pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 125 x 60mm with and including MS hold fast - 04 Nos., MS cold rolld 100mm size butt hinges- 06 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embedding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

S & F in repairs pressed steel frames for doors with one & more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified size of frame 105 x 60mm with and including MS hold fast - 3 Nos., MS cold rolled 100mm size butt hinges - 03 Nos., welding to existing MS frame, PCC bed block 1:2:4 type B1 for embadding hold fasts and plain cement concrete 1:3:6 type C1 (12.5mm graded stone aggregate) for filling in MS frame, complete all as specified & directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side with and including 3mm thick 1st Class hardwood (Teakwood) beading all around on edging, complete all as specified & directed.

M&L for 35mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass (without sash bars), guage etc divided into squares with plain, chamfered or rounded, mitered and rebated sash bars any number, size of members of shutters as specified in clause 8.24(a) of SSR Part-I 2009, complete all as specified and directed.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS tube supplying and fixing in opening complete all as per specification and drawings.

S & F factory made solid PVC moulded door shutters 28 to 30 mm thick (stiles) with 2,4 or 6 raised panels design with 2mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face,supplying & fixingued solid in frame at site as per specification & drawings with particle board core etc. including 3mm thick, 1st Class HW (TW) beading all around on edging and welding 3 Nos. MS butt hinges size 100mm with existing MS frame, complete all as specified and directed by Engr-in-Charge .

S&F aluminium powder coated three track sliding window with two or more shutters with & including 4 mm thick tinted glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock etc using PVC beading etc using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved, fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes etc. by comprising of the following provisions, complete all as specified and directed. (a) Frame bottom 20620 (b) Frame top & side 20621 (c) Shutters top & bottom 20844 (d) Shutter inter lock 20724 (e) Handle (Side ) for 20606 shutters

S&F aluminium powder coated ventilators / louvers 5mm thick x 10cm wide frosted glass strips including with following aluminium powder coated sections conforming to catalogue of JINDAL or of equivalent make including rubber beading etc, complete all as specified and directed:- (a) SP - 20048 (b) Glazing clips 19352

S&F for 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 300mm length of bolt, aluminium alloy, anodised, sliding door bolts with hasp staple (bolt type) anf fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy, complete all as specified and directed.

S&F 100mm sizes mild steel butt hinges medium weight, cold rolled, complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 150mm overall length of cover plate brass body door stopper and tongue with hard drawn steel spring, complete all as specified and directed.

S&F19mm thick commercial plywood conforming to IS-12823, Gde-I, quality, extrior grade as in kitchen cabinet fixed with screw including with 6mm thick teakwood beading all around the shutter, complete all as specified and directed by Engr-in-Charge.

S&F 0.9mm thick decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish, width of flaps (When open) 30mm, complete all as specified and directed.

M&L for IInd class hard wood wrought plain fillets square, rectangular or triangular in section clean sawn secured with screws, sectional area exc. 13 Sqcm but not exc 25 Sqcm etc complete including dismantling of timber fillets in cabinet / cupboard frame, complete all as specified and directed.

S&F in replacement 100 mm brass fancy type cupboard handle fixed with nuts, screws and washer of brass polished, complete all as specified and directed.

S&F in repairs Magnet catches and striking plate, complete all as specified and directed.

Dismantling of wall/ceiling boards of any thickness including cover fillets, complete all as specified and directed.

M&L for Gypsum ceiling board, prepainted, perforated finish, 600 x 600 x 8 to 9 mm thick in size of approved brand / make, laid over and including grid work of size 595 x 595mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling by using 2 mm thick G.I. suspension wires spaced at 1200 mm on main runners including making niches for fans & light , complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated etc.) sheets as in roof covering, including dismantling & re-fixing of wind tie, complete all as specified and directed.

S&F 6 mm thick asbestos cement, corrugated or semicorrugated sheets as in roof, walls etc fixed with L or J type hooks as in patches, complete all as specified and directed.

S&F asbestos cement one piece plain angular ridge 6mm thick serrated ridge for corrugated or semi corrugated sheet fixed with coach screws, complete all as specified and directed.

All as per item No. 88.00 above but fixing only, complete all as specified and directed.

Fixing only as in wind tie etc., complete all as specified and directed by Engineer-in-Charge

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed for following size of pipe :-

15mm bore.

20mm bore.

Supplying, fixing, jointing and testing galvanised steel tubing (Concealed), medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floor complete all as specified and as directed for the following sizes:-

15mm bore.

20mm bore.

S&F repairs PVC floor trap 75mm dia with grating including jointing with solvent cement, complete all as specified and directed.

M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor / wall with and including second course injection of CORESEAL 135A/CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge. (Note :- The rate is inclusive of replacement of any defective fittings/fixtures of any type/material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend.) (Makes for this item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved by Accepting Officer.)

M&L for mild steel structural steel framed work as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as directed including dismantling the old structure, complete all as specified and directed.

S&F in repairs prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of manglore pattern having tensile strength of 550 Mpa and 150 GSM as in roof covering /cladding to wall fixed with 'L' type or 'J' type or cranked hook using special type washer in roof, complete all as specified and as directed.

MONA ASSOCIATES

Gauri Associates

M/s.BAJRANG CONSTRUCTION

M/S Sharvi Construction