ADDN/ ALTN TO BLDG NO 11A 15A AN 17A AT GAUR ENCLAVE AND PROVN OF DRAINAGE SYSTEM HARDSTANDING AND ALLIED WORKS AT 3 THIMMAYA MARG AND REPAIR/ REPLACEMENT OF OLD CONNECTED WIRING MCB DB AND LIGHT FITTING UNDER GE (WEST) LUCKNOW

Amount

Demolition of brick or stone boulder masonary, built in cement mortar including all quions, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M & L for Brickwork with fly ash bricks(Old size), straight or curved on plan exc 6m mean radius, built in in CM 1:6 complete all as specified and as directed.

M & L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed.

Taking down cement plaster from brick wall including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Material and labour for 15 mm thick rendering in CM (1:6 ) on fair faces of brick wall or concrete surfaces finished even and smooth complete all as specified and as directed.

Material and labour for 15mm thick rendering in CM (1:4) on brick work including using integral water proofing compound finished even and fair complete all as specified and as directed.

Supply only integral water proofing coumpound conforming to IS 2645 complete all as specified and directed.

Material and labour for 5 mm thick rendering in CM (1:3 ) on ceiling surfaces finished even and smooth complete all as specified and as directed.

M & L for (Premium quality) Non skid coloured ceramic tiles 7-8mm thick area of each tile exc 0.06 sqm but n. exc 0.11 sqm in floors including 15mm thick screed bed or bedding layer of mortar with CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of old tile complete all as specified and as directed.

Material and Labour for coloured glazed ceramic tiles 300 x 600 x 6-7 mm thick on vertical surfaces such as skirting/dado including 10mm thick backing coat in CM (1:4) including setting with cement paste and pointing with coloured/white cemente to match the tiles including dismantling of old tile complete all as specified and as directed.

M & L for (Ist quality) light shade double charged vitrified tiles 8-10mm thick, light shade, square polished, area of each tiles n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 including dismantling of old tile complete all as specified and as directed.

M & L for (Ist quality) light shade double charged vitrified tiles 8-10mm thick, light shade, as in skirting/dado set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles including 10mm thick backing coat in CM 1:4 including dismantling of old tile complete all as specified and as directed.

Dismantling stone slab and tiles of any description and thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 18-20mm thick Granite stone slab, machine cut and polished as in cooking platform in full lenght, bedded and jointed with grey cement slurry and pointed to match the shade of granite sotne, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding, and including making sandwitch moulding to edges complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations etc complete all as specified and as directed.

Drilling through holes in granite stone for pipes etc not exc. 25 mm dia complete all as specified and as directed.

Taking down steel tubing and connection 15mm bore incl cleaning for refixing or removing from site and Material and labour for GI tubing 15mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and as directed.

Taking down steel tubing and connection 20mm bore incl cleaning for refixing or removing from site and Material and labour for GI tubing 20mm dia medium grade galvanised with all fittings fixed to wall and in floor complete all as specified and as directed.

Material and labour for cutting and chaseing in brick wall for concealed GI tubing and making good in CM 1:4 n.exc 10 cm in girth complete all as specified and as directed.

Taking down rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply and fixing in repair 100 mm dia cast iron sand cast soil, waste and vent pipes in any length with or without ears with cement joints , fixed to walls complete all as specified and as directed.

Supply and fixing in repair 75 mm dia cast iron sand cast soil, waste and vent pipes in any length with or without ears with cement joints , fixed to walls complete all as specified and as directed.

S & F PVC (SWR) Pipes 110mm bore single socketed in any length with rubber ring joints , fixed on walls in trenches or in floors complete all as specified and as directed.

S & F PVC (SWR) bends any radius 110mm size complete all as specified and as directed.

S & F in repair 100 mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or without ears complete all as specified and as directed.

S & F in repair 100 mm dia plain bends CI sand cast soil waste and vent pipes in length with or without ears with cement joints fixed to wall complete all as specified and as directed.

S & F in repair 75 mm dia plain bends CI sand cast with or without ears with cement joints fixed to wall complete all as specified and as directed.

S & F in repair 100 mm dia Nahani trap to waste pipe fixed in cement concrete complete all as specified and as directed.

S & F in repair 75 mm dia Nahani trap to waste pipe fixed in cement concrete complete all as specified and as directed.

Supply and fixed in repairs vitreous china wash hand basin white flat back size 550x400mm incl 02 Nos angle iron bracket 40x40x5mm bracket CP waste coupling,and 32mm dia PVC waste pipe, complete all as specified and as directed.

S & F in repair vitreous china Water closet pedestal pattern with sheet cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe etc complete all as specified and as directed.

Supply and Fixing in repair vitreous china squatting pan, Orissa pattern, long pan size 580 x 440mm with 'P' or 'S' trap with integral foot rest & fixing incl making good floor to match complete all as specified and as directed.

S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and as directed.

S & F in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer complete all as specified and as directed.

S & F in repair for 15mm bore CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S & F in repair Single lever Wall mixer 3 in 1 system with provision of both hand shower and over head shower complete with 115mm long bend pipe on upper side connecting legs and wall flanges (without hand and over head shower) including all fittings and fixed complete all as specified and as directed.

S & F in repair for 15mm bore CP single lever Sink mixer for Kitchen sink mixer without popup waste system with 450mm long braided hoses complete all as specified and as directed.

S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.

S & F in repair CP brass stop/angle valves 15mm bore fancy type chromium plated with quarter turn handle and wall flange complete all as specified and as directed.

S & F in repair Overhead shower 200 x 200mm square shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 450mm long including all fittings and fixed complete all as specified and as directed.

S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall complete all as specified and as directed.

S & F in repair Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S & F in repair health faucet (hand shower) with 1 mtr flexible tube with hot and cold water supply wall hook, bracket etc complete set of superior quality complete all as specified and as directed.

S & F in repair for fancy type brass chromium plated toilet paper holder with flap including all fittings and fixed complete all as specified and as directed.

S & F in repair CP Brass Tabular Towel Rail, 12mm dia D type 60cm long between flanges complete set of superior quality complete all as specified and as directed.

S & F in repair PVC coloured bath cabinet, overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and as directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket, guard and railing 60cm long complete all as specified and as directed.

S & F in repair Glass corner self, fancy type, 250x250 and 8-10mm thick fixed with brass bracket and screwed complete all as specified and as directed.

S & F 300mm long Stainless steel six peg hanger chromium plated as approved by engr-in-charge complete all as specified and as directed.

S & F in repair sink with drainage board size 1145x510 mm,bowl size 560x410x200 mm made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc including bedding including cement mortar, dwarf wall or cantilever brackets and connection union to pipe all as specified and as directed.

S & F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of size 900x750 mm including screws and wt not less than 5.00 Kg ccomplete all as specified and as directed.

S & F for rotational moulded double layered polyethylene water storage tank cylindrical, hoisted & fixed in position all as specified capacity 500 ltrs including dismantling of old tank complete all as specified and directed.

S & F for rotational moulded double layered polyethylene water storage tank cylindrical, hoisted & fixed in position all as specified capacity 1000 ltrs including dismantling of old tank complete all as specified and as directed.

S & F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and as directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.

Taking down & refixing shutters of any description exc 1sqm and n exc 2 Sqm in the same opening complete all as specified and as directed.

Taking down shutter only of any description exc 1 sqm n. exc 2 sqm each and removing to store complete all as specified and as directed.

Material and labour for Cutting holes exc half brick but n.exc one brick in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

S & F 30mm thick flush shutter, solid core construction with block board core and ply wood panels of commercial type on both side complete all as specified and as directed.

S & F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plan, chamfered or rounded all as specified under 8.20(a) of SSR Pt-I complete all as specified and as directed.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 75 x 50mm single rebated factory made, 100% solid WPC (wood polymer composite) Paintable door frame made from 100% lead free (Single Extruded Process) material with density not less than 780 kg/Cum all as specified and directed. (a) Door frame shall be water proof, termite proof, fire retardant and having excellent screws holding capacity. (b) Rate for this item includes material and labour for fixing of frame with minimum 06 nos of hold fasts / dash through bolts of suitable size as directed.

S & F 28mm thick factory made 100% solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 Kg/cum, manufacturer by an ISO 9001/2015 certified company complete all as specified and as directed.

S & F 19mm thick factory made 100% solid PVC flush shutter made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 Kg/cum, manufacturer by an ISO 9001/2015 certified company complete all as specified and as directed.

S & F 200mm long alumunium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S & F Mild steel Butt hinges "medium weight" cold rolled mild steel 100mm size complete all as specified and as directed.

S & F alumunium handle fabricated type anodised 150mm long complete all as specified and as directed.

S & F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and as directed.

S & F 19 mm thick BWR plywood interior grade both side with comercial face fixed with screwed to timber frame work edge chamfered as directed by Engineer-in-Charge complete all as specified and directed.

S & F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas directed by Engineer-in-Charge complete all as specified and directed.

S & F Continuous (piano) hinges of size of flap 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed by Engineer-in-Charge.

S & F Auto concealed Hinges SS size 103mm64mmx28mm suitable for cabinet and wardrobe complete all as specified and directed.

S & F 100mm size aluminium handle fabricated type anodised complete all as specified and as directed.

S & F 100mm size aluminium anodised hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F heavy duty CP mild steel hanging rod 18 mm dia with end brackets and fixed with screw complete all as specified and as directed.

S & F fancy type stainless steel curtain rods of 25mm dia of approved shade including bracket/joictions/wall to wall complete all as specified and as directed.

S & F Stainless in repairs steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed.

S & F 300mm MS ordinary rat tail pattern spring including roller & roller plate complete all as specified and as directed.

Material and labour for prepration of newly plastered wall surface and applying three coats of white wash complete all as specified and directed.

Material and labour for one coat of white wash on old treated wall surface incl prepration of surface complete all as specified and directed.

Material and labour for preparation of new/old plastered surface of walls by washing rubbing and applying two coat of plastic emulsion over and incl one coats of 1mm thick birla wall care putty complete all as specified and as directed.

Material and labour for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of old plastered ceiling surface and applying two coats of white wash complete all as specified and directed.

Material and labour for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old wood or wood based surface of any description exceeding 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of Old steel surface of any description exceeding 10cm width or girth and applying one coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of Cement Concrete Reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for 75 mm thick cement concrete type C1(1:3:6) using 20mm graded stone aggrtegate as in plinth protection including finsihing even & fair ccomplete all as specified and as directed.

M & L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base etc complete all as specified and directed.

Demolition of Cement Concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated soil n exc. 250m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M & L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

M & L for 40 mm thick Cement concrete 1:2:4 type B-0 using 12.5mm gradred stone aggregate as in Damp proof course to horizontal or vertical surfaces with using water proofing compound including necessary formwork complete all as specified and directed.

M & L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels bands, shelves complete all as specified and directed.

M & L for Reinforced cement concrete 1:1.5:3 type A-1 using 20 mm graded stone aggregate as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L for Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, lintel, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finshed surface of concrete complete all as specified and directed.

S & F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24 x 0.3mm using 4mm thick high pressure steam cured classic variant E-Board, designer pattern to be placed in the grid suspended by 2mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M & L for hard core of broken stone or boulder of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and rammed to a true surface complete including filling interstices with approved fine material like earth or grit etc. complete all as specified and as directed.

M&L for sand filling under floors as in coushoning for interlocking paver blocks complete all as specified and directed.

M & L for factory made machine pressed precast 60mm thick PCC inter locking paver blocks M-35 grade of any shape and size confirming to IS-15658-2006 as in hard standing with grey cement and pigment complete all as specified and directed:

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, haunching, kerb/fillets including necessary excavation earth work complete all as specified and as directed.

Excavation in post holes in (or similar holes) each n.exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken bubble mixed with earth arround in layers n.exc 25 cm thick and removal of surplus soil complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-2 (40mm graded) stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

S&F for MS steel work as in rectangular purlins, rafters and similar item complete including cutting, griding, welding etc as required (F290 Gde E-165) complete all as specified and directed.

S&F rolled mild steel in joist, channel, angle or tee sections, circular tubes fixed independently as in post, pillars stanchions etc (FE-290 Gde E165) complete including cutting grinding welding etc as required complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for preparation of new steel surface of any description exceeding 1cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting including Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- Primer and emmulsion to be carried out through air less spray machin ( Mechanical means)

Material and labour for providing precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab shelve and similar articles etc set in CM 1:4 including necessary form work complete all as specified and as directed.

Material and Labour for preparation newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

RCC NP3 200 mm diameter Pipes laid on 150 mm thick bed of PCC 1:4:8 with excavation upto 1.65m depth in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional complete all as specified and as directed.

M&L for 18-20mm thick Granite stone slab, machine cut and polished as in wall, bedded and jointed with grey cement slurry and pointed to match the shade of granite sotne, laid over and including 15mm thick rendering in cement mortar 1:4, including rubbing, grinding, complete all as specified and directed.

S & F PVC (SWR) junction single, (Single T) equal or unequaldia complete all as specified and directed.

Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed.

M&L for chequered cement concrete tiles coloured glossy finish rubber moulding with mixture of white cement and pigments of size 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry in fooors incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply and fixing anodised aluminium glazed side hung door shutter with frame using section 100 x 44mm x 1.5 mm thick with standard door section having style, top rail, lock rail as 83 x 44 x 1.5mm where as bottom rail will be made up of 100 x 44 x 1.5mm including 5mm thick plain sheet glass ordinary quality (Modi/Atul) including all necessary suitable handle, hinges, screw, jointing cleats, rubber packing, Aluminium snap beading and one No 200mm long Aluminium tower bolt, 100 mm long 3 Nos Aluminium hinges B-21 type and one No Mortice lock 100mm size 4 lever (vertical type) and hydraulic door closure for each shutter complete all as specified and directed.

Taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately)and making good disturbed surfaces of walls, floors, etc. to match with the existing good disturbed surfaces of walls, floors etc. match with the existing complete all as specified and as directed.

M & L for Point wiring complete with 1.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through existing rigid non metalic PVC conduit and conduit accesseries concealed in walls/ceiling, electrogalvanised pressed steel modular metal flush box 1/2 module to 8 module concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer along with white cover plate with plate up to 12 module for housing modular switches, and sockets 1.5 sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly complete all as specified and as directed.

Ditto all as above item No -126 hereinbefore but but socket outlet point 5 amps on independent board complete all as specified and as directed.

Ditto all as above item No -126 hereinbefore but one socket outlet point on same baord complete all as specified and as directed.

Ditto all as above item No -126 hereinbefore but one bell point controlled by one, one way Switch complete all as specified and as directed.

M & L for Point wiring complete with 2.5 sqmm PVC (FRLS) insulated stranded copper conductor single core cable drawn through existing rigid non metalic PVC conduit and conduit accesseries concealed in walls/ceiling, electrogalvanised pressed steel modular metal flush box 1/2 module to 8 module concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer along with white cover plate with plate up to 6 module for housing modular switches, and sockets 2.5 sqmm PVC insulated (green insulation copper conductor) earth continuity cable drawn with wiring and connected to common earth dolly complete all as specified and as directed.

S&F modular switch, single pole, 1 way 5/6 Amp, 230 Volts, 1 module complete all as specified and directed.

S&F modular switches single pole, 1 way 15/16A, 230 V,1 module complete all as specified and directed.

S&F modular socket, single pole, 5 pin 5/6 Amp, 230 Volts, combined 2 module complete all as specified and directed.

S&F modular socket, single pole, 5 pin 15/16 Amp, 230 Volts, combined 2 module complete all as specified and directed.

S&F Modular Bell push 6A 1 module complte all as specified and directed.

M&L Ceiling rose, Pilot 3 Plate ceiling rose 6A complete all as specified and as directed.

S&F modular rotary step type fan regulator, single pole, 120 W, 2 module, complete all as specified and directed.

S&F modular white cover plate with frame, 1 module complete all as specified and directed.

S&F modular white cover plate with frame, 3 module complete all as specified and directed.

S&F modular white cover plate with frame, 6 module complete all as specified and directed.

S&F modular white cover plate with frame, 8 module complete all as specified and directed.

S&F modular white cover plate with frame, 12 module complete all as specified and directed.

M&L for sub main wiring comprising two single core, 4 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS Grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 4 Sq mm nominal cross sectional area on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and as directed. (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tendered)

S&F BLDC ceiling fan 1200 mm sweep with powder coated aluminium blades min air delivery 220 m³ /min, power consumption 26 watt, star rating (BEE) 5 star, 350 RPM with down road as per site requirement along with connected accessories incl provn of connection with three core flexible copper cod of size 1.5 sqmm from ceiling rose to fan min 2 year product warranty and 05 year motor warranty all as specified and directed.

Supply and Fixing in repair wall/surface mounting luminaires integrated LED Batten 20/22 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and as directed.

S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements complete all as specified and as directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and as directed.

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, “ IP66 and IK 07 average life 50000 burning hours with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and as directed.

S & F water heater storage type electric BEE 5 star rated of capacity 25 ltrs to operate on 230 volt AC, vertical type including 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible steel hose pipe of size 15 mm, 450 mm lenght & suitable plug top of 16 Amp capacity including disconnecting and taking down old unserviceable Geyser and deposited in AGE E/M (W) store yard for BER action complete all as specified and directed.

S&F MCB SP 6 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and as directed.

Supply and fix modular type blanking plates, one module complete all as specified and directed.

S&F modular tytpe plug and socket DBs with Single pole MCBs rated 32 Amps capacity including making niche in wall and mounted flush complete all as specified and as directed.

Taking down carefully geyser of any type and refixing the serviceable geyser in its original or new location complete all as specified and as directed.

Taking down carefully ceiling fan/exhaust fan of any size and type and refixing the serviceable fans in its original or new location complete all as specified and as directed.

S&F call bell AC single pole 240 volt Musical Type complete all as specified and as directed.

Supply & fix modular fan regulator 120W, 2 Module for ceiling fan fixed, in board and connecting as directed, after dismantling and removing unserviceable regulator complete all as specified and as directed.

Supply & Fxi MCB SPN 32-40 Amp, 240 volts, single pole & neutral complete all as specified and as directed.

S&F double door VTPN 4 way double door suitable for 4 pole MCCB 125A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed by Engr-in-charge.

S&F MCCB 100-125 Amps 415 volts, 4 pole 16 KA breaking capacity complete all as specified and as directed.

S&F in replacement of sheet metal enclosure (MCB DB) single phase and neutral with 200 Amps rated bus bar 12 way double door type , 240 volts complete all as specified and as directed.

S&F in replacement of sheet metal enclosure (MCB DB) single phase and neutral with 200 Amps rated bus bar 8 way double door type , 240 volts complete all as specified and as directed.

M&L for two single core PVC insulated cable with 6 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit complete.(PVC Conduit and accessories shall be deemed to be included in the quoted rate) complete all as specified and as directed.

M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of char coal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print and as directed .

Supply and fixing exhaust/fresh air fan 250 mm sweep (white) plastic body with louvers including provn of flexible three core cable from ceiling rose to terminal for making connection , fitting on wall including all necessary fixing accessories complate all as specified and as directed.

M/s Sudhir Enterprises

suniltraders

M/S Reliance Construction

rajan construction

Divya Jyoti Constructions

M/S KAUSHIK CONSTRUCTION

ANIL CONSTRUCTION

QUALITY CONSTRUCTIONS CO