CA NO GE(W)/HSR-43/2025-26 SPL REPAIR TO BLDG NO T-165 T-1391 and T-1392 AND DDN/ALTN OF COOK HOUSE SHELTER AT HISAR MIL STN UNDER GE (W) HISAR

Amount

Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete all as specified and directed.

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body 150 mm longbrass body and tongue with hard drawn steel spring with rubber shoes fixed in repair complete all as specified and directed.

S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.

M&L 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003. The shutter shall be fitted to chowkhats complete all as specified and directed.

M&L 35mm Glazed and skeleton shutters second class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters complete all as specified and directed.

M&L for Preparing new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clip of sheet,cast or extruded section, bolt not less than 16 mm dia, 300 mm long complete all as specified and directed.

S&F 150 mm extruded alluminium alloy handle, fabricated type complete all as specified and directed.

S&F aluminium handles extruded fabricated type anodized of size 125mm complete all as specified and directed.

Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall ,fixed with self tapping screws complete all as specified and directed.

M&L Pre painted galvalume alumimnium zinc coating GI based Plain steel sheet 0.50 mm th, sheeting of any colour having tensile strength of 550 mpa as in ridges etc, complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid framed work for false ceiling and including hangers 6mm dia G.I (upto 1200mm long ) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40x3mm size 60mm long and expansion holdfastener 12.5mm dia 40mm long complete al as specified and directed.

S&F False ceiling with calcium Silicate board, perforated type, and acoustic purpose, factory made matt finish surface, 600mm x 600mm in size and 12mm thick complete all as specified & directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed.

M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:3 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L ligh shade Virified Ceramic tiles 10 mm thick (square/ ectangular) polished, area of each tiles not exceeding 0.30 sqm, in floors etc. over and incl 15 mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Chequered cement concrete tiles with grey cement and pigments 200mm x 200mm x 25/ 30cm X30cm X25mm thick, set in 15mm thick CM of (1:6), jointed and pointed in neat cement slurry in floors/paths complete all as specified and directed.

M&L for Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M&L for 1:3:6 (20mm aggregater) for coping and side filling and other pcc work , complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, for MS railing at passage, stair and rear sitouts complete all as specified and directed.

M&L for rolled sections as in tubular trusses / rafter / purlin fixed with angle cleats or other connecting plates, other iron work confirming to FE-410 (Gde-E-250) complete for holding galvallume sheeting in passage all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 over brick / conc wall surfaces trowelled to even & smooth w/o using extra cement for internal wall surfaces complete all as specified and directed.

Description all as per item No 30.00 above but in CM 1:4 mixed with liquid type water proofing compound as per manufacturers direction on external surfaces complete all as specified and directed.

Supply only liquid type water proofing compound complete all as specified and directed.

M&L two coats of Oil bound distemper on new plastered or unplastered surfaces over and including 1mm thick acrylic wall care (Birla / JK white / Asian / Berger) putty and a coat of alkali resistant primer on walls including preparation of surfaces complete all as specified and directed.

M&L two coats of Oil bound distemper on old plastered or unplastered surfaces over and including 1mm thick acrylic wall care (Birla / JK white / Asian / Berger) putty and a coat of alkali resistant primer on walls including preparation of surfaces complete all as specified and directed.

M& L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over one coat of white wash complete all as specified and directed.

M& L for preparation of old surfaces of wall and applying one coat of cement base paint complete all as specified and directed .

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for flyash brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors,walls aprons etc (laid, bedded and pointed in any mortar) complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. Note : Single piece tiles will be placed on the surface of stair case tread area.

M&L for Machine cut kota stone slab flooring 20-25mm thick as skirting screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 10mm thick screed bed or bedding in cement mortar 1:4 complete all as specified and directed. (Note : Single piece tiles will be placed on the surface of stair case tread area).

S&F Factory made Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed.

Factory made Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed.

S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed.

S&F 3 mm thick frosted sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.

Providing of guard bars in window and ventilator of mils steel or iron Fe-290 Gde E-165, complete all as specified and directed.

M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height complete all as specified and directed.

Cutting holes into or through cement concrete and cutting through reinforcement chajja etc reinforce of otherwise surface area exc 100 Sqcm but n exc 250 Sqcm as directed to insert angle or tee for holding chazza/ coller plateform as require complete all as specified and directed.

S&F mild steel Joist, channel, angle or tee section fixed independently without connecting plates,etc for coller stnd chazza or other similar work complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement oncretepaver block of M-30 grade with approvedcolour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed.

M&L Hard core of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick (in tranches and surface), watered and rammed to a true surface with broken stone or boulders complete all as specified and directed.

S & F Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.

Supply and fixing 3mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane complete all as specified and directed.

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT steel bars 5mm dia and overand including 10mm dia is stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders,plinth beam bressummers, lintels, cantilevers, shelvves including sup-ports, overhangs, etc. also splays between floors and beams, etc finish with rough finish flat surface complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; complete all as specified and directed.

M&L RCC M-25 (Nominal Mix) as in slab, cantilevers, bressummers, lintels beams and plinth, etc of any length complete all as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with switches/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic existing concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site. Including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment complete all as specified and directed.

Description all as per item No 65.00 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on independent board complete all as specified and directed.

Description all as per item No 65.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

Description all as per item No 65.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular switch 1 way 16A 1 module all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F modular fan step regulator 120W-2 module suitable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed.

S & F in repair for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F in repair Sheet metal enclosure distribution board SPN, 8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp rating copper bus bar complete all as specified and directed.

Supply and fixing MCBs SP 6 to 32Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing in replacement LED light fittings 36/42 watt Surface Mounting/Recess mounting light, 3 way mounting arrangement (Surface mounted, 2x2) Sheet aluminium housing with high quality LGP and PMMA diffuser. Separate HPF driver 240 volt alongwith fixing arrangements all as specified and directed. Note : Colour of light as per direction of GE, Make Orients or its equvalent.

S & F in repair for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Taking down Existing Ceiling fan and deposite in MES store and same refixing the after rewinding, painting, greasing and change unserviceable bearing complete all as specified and directed.

S&F in repair service wire size 16 sqmm 2 core with GI wire complete all as sepcified and directed.

M&L for providing/cutting the round/ square hole of required size in wall finishing the same for disturbed surfaces complete all as specified and supply and fixing propeller type AC ventilating fans, single phase , 230 volts 250 mm sweep complete and grouting the ragged bolts in wall fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm height complete all as specified and directed.

SITA RAM AND SONS (BID ID -3523407)

S K BUILDERS (BID ID -3525712)

M/S RAJESH KUMAR & SONS (BID ID -3526447)

SHRI HARI BUILDERS (BID ID -3521360)

malik constructions (BID ID -3525559)

M/S RR ENGINEERING CO (BID ID -3520820)

M/S KAVITA CONSTRUCTION (BID ID -3524055)

Deepak contractor (BID ID -3521076)