PERIODICAL SERVICES IN OTM AND MD ACCN OF A-1 AREA OF AGE B/R-I UNDER GE (WEST) JRC

Amount

M&L for preparation of old surfaces of walls and applying one coat of colour(lime) wash on wall complete all as specified and directed by Engr -in-charge.

M&L for preparation of old surfaces of ceiling and applying one coat of white(lime) wash on ceiling complete all as specified and directed by Engr -in-charge.

M&L for complete removal of existing treatment of walls incl, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying one coat of exterior emulsion paint over and incl a coat of primer as per manufacurers instructions and directed by Engr -in-charge.

M&L for preparation of old surfaces of walls incl, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying one coat of exterior emulsion paint over and incl a coat of primer as per manufacurers instructions and directed by Engr -in-charge.

M&L for preparation of old decorated surfaces of walls incl, scraping down smoke soot, moulds, moss & efflorescent salts & trading oil and greesing spots etc & applying one coat of exterior emulsion paint as per manufacurers instructions and directed by Engr -in-charge. (Note :- working height may vary between 12 mtrs to 22 mtrs)

M&L for preparation of old decorated surfaces of walls, washing rubbing down and stooping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified and directed by Engr -in-charge.

M&L for complete removal of existing treatments by washing, rubbing down and stopping etc on wall and applied two coat of oil bound distemper over one coat of primer complete all as specified and directed by Engr -in-charge.

M&L for preparation of old surfaces of walls and applying one coat (1-2mm) of birla white putty and finished smooth complete all as specified and directed by Engr-in-charge.

M&L for preparation of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed by Engr -in-charge.

M&L preparation of old surfaces and applying one coat of synthetic enamel paint on kerb stone complete all as specified and as directed

M&L for preparation of old surfaces and applying one coat of exterior emulsion paint on asbestos cement sheets complete all as specified and as directed

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in-charge.

Uprooting of trees, grass bushes etc from brick wall/roof/ other Part of building including dismantling the required brick work/ roof tiles /mud/concrete etc for uprooting the vegetation etc and make good the same to match with existing surface with same material or concrete 1:2:4 after pouring the chemical (Which destroy the growth of vegetation to the place where vegetation remove.The rate for scaffolding or any other arrangement required during this process upto 10 mtr height included.

Removing existing paint by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) having RPM between 600-1500, sanding paper of 60/80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and as directed by Engineer-in-Charge.

Providing and applying white cement based putty @ 1.0 Kg (undiluted) per sq mtr. of average thickness 1 mm, of Asian Paints or any other approved make over the plastered/ old painted wall after scrapping to prepare the surface even and smooth complete. Step 1 : Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute) or equivalent Step 2 : Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application of Asian Paints Trucare Graco Spray Machine (Model: EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of 6 ltrs per minutes with a maximum pressure 227 bar having maximum tip size 0.039" Step 3: Allow 6-8 hrs time to dry the putty surface. Step 4: Apply second coat of the prepared mixer manually to make to smooth to make the finish even. Step 5: Allow 6-8 hrs time to dry the putty surface complete all as specified and as directed by Engineer-in-Charge.

Sanding of the putty surface with Asian Paints TruCare Wall Sander: L- 01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM between 600-1500, sanding paper of 180 Grit having dia of 7"/9" to make the surface free from dust etc. by skilled labour complete all as specified and directed.

Providing and applying two coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min.1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between both the coats of paint complete all as specified and as directed by Engineer-in-Charge.

Providing and applying one coats of acrylic washable distemper @ 1.5 kgs /10 sq mtrs diluted with water in 5:3 ratio applied over primimg coat @ 0.8 ltr (undiluted)/10SQM diluted with water in 1:1 ratio with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalant having an electric motor of min.1 HP with a flow speed of min 2 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between both the coats of paint complete all as specified and as directed by Engineer-in-Charge.

FRIENDS ENGINEERS (BID ID -3156422)