SPL REPAIR OF OFFICERS WASH ROOM AT HQ 373 ARTY BDE AND PROVN OF 02XSENTRY POAT AT ZONE-10 AND ZONE-9C AT TALBEHAT MIL STN

Amount

Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 15 mm bore complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 20 mm bore complete all as specified and directed

Supply & fixing UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc complete. complete all as specified and directed

Supply & fixing UPVC pipes out side dia 20 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors etc complete. complete all as specified and directed

Supply & fixing in repairs vitreous china white wash basin Table Top Wash Basin 550 X 400 X 140 M excluding taps, waste, chain, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand complete all as Specified and directed. Make : Cera/ Parryware/ Hindware, sample as approved by GE

Supply & fixing for pillar taps swan neck cost copper alloy fancy type with capstan head, chromium plated screwed down high pressure with or fly nuts screwed for 15 mm bore iron pipe and fixed all as Specified and directed. Make : Cera/ Prayag/ Jaguar, sample as approved by GE

Supply & fixing in repair Chromium plated brass angle valve for 15mm bore pipe, fixed in repairs complete all as Specified and directed. Make : Cera/ Prayag/ Jaguar , sample as approved by GE

Supply & fixing in repair, two way angle valve cock chromium plated brass fancy type bore 15mm complete all as Specified and directed. Make : Cera/ Prayag/ Jaguar sample as approved by GE

Supply & fixing in repair vitreous china wash down P Trap EWC closet Combine one piece set twin flush fitting white vitreous china wash down water closejet pan including flushing pipe anti syphonage pipe white including making connection to trap and to flushing pipe etc complete and making good to floor complete all as Specified and directed. Make : Cera/ Parryware/ Hindware sample as approved by GE

Supply & fixing in repair CP brass toilet paper holder, superior quality complete all as specified and directed.Make : Cera/ Prayag/ Jaguar sample as approved by GE

Supply & fixing in repair CP brass, soap dish, superior quality complete all as specified and directed.Make : Cera/ Prayag/ Jaguar sample as approved by GE

Supply & fixing Health foucet including PVC pipe 1.50m long with brass nuts for EWC, fixed in repairs complete all as specified and directed Make : Cera/ Prayag/ Jaguar sample as approved by GE

Supply & fixing in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, complete all as specified and directed Make : Cera/ Prayag/ Jaguar sample as approved by GE

S&F in repair bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F in repair bib taps short body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar complete.

S&F for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore complete.

S&F for PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 75 mm bore complete.

S&F for PVC (SWR) bends any radius, 110 mm bore complete.

S&F for PVC (SWR) bends any radius, 75 mm bore complete.

S&F for PVC (SWR) vent cowl, 110 mm bore complete.

S&F for PVC (SWR) "P" trap, 110 mm bore complete.

S&F for PVC (SWR) "P" trap, 75 mm bore complete.

S&F for PVC (SWR) "Q" trap, 110 mm bore complete.

S&F for PVC (SWR) "Q" trap, 75 mm bore complete.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land complete all as specified and directed.

Material and Labour for Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick/stone or concrete surface including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land complete all as specified and directed.

Material and labour for 12 mm thick Ready Mix Plaster in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, on other than fair faces of concrete surfaces in wall ( internal surface ) and finished even and smooth without using extra cement, complete all as specified and directed. by Engr-in-Charge. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish complete all as specified and directed.

M & L for Vitrified tiles dark or light shade /double charge /ultra charged 10-12 mm thick area of each tiles exceeding 0..42 sqm but not exceeding 1.00 sqm laid in floors etc set and jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles over screed bed or bedding layer of 15 mm thick cement mortar 1:4 for laying floor tiles over 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) complete all as specified & directed.

Material and Labour forVitrified tiles dark or light shade /double charge /ultra charged 10-12 mm thick area of each tiles exceeding 0..42 sqm but not exceeding 1.00 sqm cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, over and including 10 mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved

Material and Labour for Granite stone best quality (of any type) tiles 15 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismentling of stone slab complete all as specified and directed

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified & directed.

S & F for aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame complete all as specified. Note : (i) Glass panes will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Windows all around will be sealed with silicon sealant.

M&L for 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified & directed.

Supplying and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed

Supplying and fixing factory made 28-30 MM thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed

S&F for butt hinges cast brass with mild hingespin, bright polished and fixed type B-11 of size 100mm etc complete all as specified & directed.

S&F for 150 mm extruded brass handles, fabricated type polished complete all as specified & directed.

S&F for brass barrel tower bolts of extruded section 200 mm long complete all as specified & directed.

S&F for 300mm long brass sliding door bolts with sand or die-cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete.

M & L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed with following:-

(a) M & L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25 x 25 mm

(b) S & F 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners

(c) S & F GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level.

(d) S & F for E-board ceiling tilesof size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE

Taking down existing wall finishes any type by vigorously wire brushing, brooming dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign mtrls making good minor cracks etc in cement mortar 1:3 and applying putty 2 kg per sqm (Birla putty) on the surface with uniform thickness making surface absolutely smooth & applying two coats of exterior emulsion paint white or tinted over priming the surface with al-kali resistance priming paint complete all as specified and directed.

M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick, Trapezoidal roofing profile with 190 mm Pitch & 29 mm depth of profile of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed.

M&L PCC (1:4:8) type D-2 (using 20mm graded stone aggregate) 75mm thick as in sub base of floors all as specified and directed.

M&L PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) 25mm thick as in floors all as specified and directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished cement concrete surface even & smooth with out using extra cement laid in alternate bays n.exc 2m in length all as specified and directed.

M&L for Hardcore Broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete all as specified and directed.

Providing precast cement concrete type B1 1:2:4 20 mm graded aggregate as in cover slabs for septic tank/ manholes/drains set in cement Mortar 1:4 complete all as specified and as directed.

Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Factory Made Solid PVC Moulded Door Shutter with partical board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F of 200mm aluminium alloy tower bolts, stove enamelled black with bright bolt complete all as specified and directed

S&F of 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified

M&L rendering 10mm thick in cement plaster 1:6 on internal surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 15mm thick in cement plaster 1:4 on external surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L for preparation of new plastered surfaces of walls and applying two coats of Cement base paint all as over a coat of primer complete all as specified and directed

M &L for coloured non skid ceramic digital tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed in CM (1:6) complete all as spd and as directed..

M & L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc crome primer all as specified

Providing and fixing factory made uPVC white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) Note:-Each member of window to be measured separately wrth clear length

S & F in repair Aluminium composite panel sheet 3mm thick PVCF wooden or plain finished of brand name 'Euro bound'/"Alstrong"./"Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required cilicon & screw as in ceiling/coloumns and in vertical surface complete all as specified and directed approved sample as kept in AGE (I) office

S&F in position 5mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required all as specified and as directed.

M&L15mm thick plaster in CM 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall over a coat of primer on surface and applying two coats of oil bound distemper complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth w/o using extra cement complete all as specified and directed.

S&F false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights as per direction of Engineer-in-charge.

Taking down carefully copper/Aluminum point wiring (light/fan/socket or power) complete, including fixture and fittings such as switches, ceiling roses pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit ( credit for above items dhould be made as per conditions separately) and making good disturbed surfaces of wall, floors etc., complete all as directed

Taking down carefully complete light fittings removing materials to store for keeping in sae custody or for taking credit (credit for above items should be made as per conditiones separately ) and making good disturbed surfaces of wall, floors etc complete all as directed.

Taking dwon Distribution boards alongwith MCB's including removing the same from site and making good to the disturbed surface complete Note: All taking down MCB's should be deposited to MES store by the contractor without any extra charge

Taking down existing sub main wiring of any type and description including removal of teak wood battern/pipe etc complete

M/L for point wiring concealed type with 1.5 Sqmm FRLS PVC insulated unsheathed single core multistranded copper conductor cable 1100 Volts grade including 1.5 Sqmm PVC insulated unshetheded copper conductor cable as earth continuity conductor drawn through in and including switches/socket/regulators etc for the following:- Make : Wire: Mescab/polycab/KEI/Havells/Finolex PVC Conduit: Polycab/Precision/Plaza/Kalinga Note: (i). On RCC ceiling/Columnm False ceiling, AC/Metallic sheet ceiling wiring done on surface with conduit/PVC casing capping and its accessories (ii). Cutting of wall, floor, PCC work and white wash for making of good to disturbed surfaces shall be included in the reate quoted. (iii). Modular plate inner and outer shall be measured and paid under relvant items.

One light/fan/bell point controlled by one No piano type switch 5 Amps single pole one way

One socket out let 5/3 pin 6 Amps controlled by one switch on the same board

One socket outlet 5/3 pin 6 Amps controlled by one switch on Independent board

All as per item No. 5 here in before but 3 pin socket outlet 15/16 Amps on the independent board all as specified with single core unsheathed PVC insulated cabe multistranded copper conductor of size 4 Sqmm for phase & Netural & 4 Sqmm for earth continuity conductor

Supply and fixing mudular switch single pole one way 6/10 Amps 240 V

Supply and fixing Modular switch single pole one way 16/20 Amps 240 V

Supply and fixing modular socket 5 Pin 6/10 Amps with shuttered suitable for module 240 V

Supply and fixing Modular socket 5 pin 6/16 Amp flush type with shuttered suitable for 2 module

Supply and fixing Modular Outer and inner plate for 2 module

Supply and fixing Modular Outer and inner plate for 3 module

Supply and fixing Module Outer and inner plate for 4 Module

Supply and fixing Module type fan regulator electronic step type, suitable for 2 modules 100 watts 240 volts

Supply and fixing ceiling rose surface bakelite 85x50 mm 100 watt three terminal

Supply And fixing lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings including with 9 watt Led Bulb Make: Item Serial No. 7.00 to 15.00 Havells (Reo/ Anchor (Roma classic/Phillips

M&L for Sub main concealed wiring with two single core PVC insulated of size 6 Sqmm FRLS unsheathed copper conductor 1100 volt grade multistrandard and including drawn through and including non metallic rigid PVC conduit and conduit accessories 25 mm external dia and conduit FRLS accessories of ISI marked medium grade including 6.0 Sqmm FRLS copper wire and connected of common earth dolly Make : Wire: Mescab/polycab/KEI/Havells/Finolex PVC Conduit: Polycab/Precision/Plaza/Kalinga Note: (i). One run of conduit two run of 6 Sqmm copper conductor & One run of 6.0 Sqmm copper conductor is measured as one unit (ii). On RCC ceiling/Columnm False ceiling, AC/Metallic sheet ceiling wiring done on surface with conduit/PVC casing capping and its accessories (iii). Cutting of wall, floor, PCC work and white wash for making of good to disturbed surfaces shall be included in the reate quoted.

Supply and fixing in replacement single pole and netural enclosure with two pin and earth socket complete with one single pole MCB of 20 Amps 240 volt

Supply and fixing metal enclosure double door for MCB / DB single pole and netural 8 way with 200 Amps double door (metallic type)

Supply and fixing MCB SP 6 to 32 Amps 240 Volts 'C' series 10 KA 50 Hz confirming to IS/IEC-60898-1

Supply and fixing MCB SPN 40 to 63 Ampos 240 Volts 'C' series 10 KA 50 Hz confirming to IS/IEC -60898-1

Supply and fixing complete LED light fittings mirror type with high output diffuser 2 feet 10 watt 220V AC decorative type with driver , holder and LED tube light in warm white including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by Engineer-in-Charge

Supply and fixing LED round panel light fitting with inbuilt driver PC body premium aesthetics with stepped ring bezel 6 watt suitable for ceiling/surface 230 Volt in warm white complete connectgion with PVC insulated multi stranded copper flexible wire twin core of suitable size from nearest source complete all as specified and directed by Engineer-in-Charge

M/L for point wiring concealed type with 1.5 sq mm FRLS PVC insulated single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated copper conductor cable as earth continuity conductor drown through in and incl FRLS PVC rigid conduit not less than 20 mm dia alongwith chase/ chisel cutting, PVC conduit and making good to the disturbed surface and match the existing colour all as specified and directed : Wire: Make -Mescab/Polycab/KEI/Havells/Finolex PVC conduit: Make -Polycab/Precision/Plaza/Kalinga Note:- (i) On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit/PVC Casing capping and its accessories. (ii) Cutting of wall, floor, PCC work and white wash for making of good to disturbed surfaces shall be included in the rate quated.

One light/fan/bell point controlled by one No piano type switch 5 Amps single pole one way

One socket outlet 5/3 pin 6 AMPS controlled by one switch on the same board.

One socket outlet 5/3 pin 6 AMPS controlled by one switch on independent board.

All as per item NO 5 above but 3 pin socket out let 15/16 Amps on the independent Board all as spfd with single core FRLS PVC insulated cable multistranded copper conductor of size 4 sq mm for phase & neutral & 4 sq mm for earth continuity conductor.

S&F modular switch single pole one way 6/10 Amp 240 volt. MAKE:- Havells(Oro)/Anchor(Roma classic)/Philips

S&F modular switch single pole one way 16/20 Amp 240 volt. MAKE:- Havells(Oro)/Anchor(Penta)/Gold Medal

S&F for modular socket 5 Pin 6/10 Amp with shuttered, suitable for 2 module 240 volt. MAKE:-Havells(Oro)/Anchor(Roma classic)/Philips

S&F for modular socket 5 Pin 6/16 Amp flush type, with shuttered, suitable for 2 module. Make: Havells(Oro)/Anchor(Roma classic)/Philips

S&F for modular Outer and Inner plate for 2 module MAKE:-Havells(Oro)/Anchor(Roma classic)/Philips

S&F for modular Outer and Inner plate for 3 module MAKE:-Havells(Oro)/Anchor(Roma classic)/Philips

S&F for modular Outer and Inner plate for 6 module MAKE:-Havells(Oro)/Anchor(Roma classic)/Philips

S&F modular type fan regulator electronic step type, suitable for 2 modules 100 watt, 240 volt. MAKE:-Havells(Reo)/Anchor(Roma classic)/Philips

M&L for sub main concealed wiring with two single core PVC insulated of size 6 sqmm FRLS unsheathed copper conductor 1100 volt grade multistandard and incl drawn through and including non metallic rigid PVC conduit and conduit accessories of 25 mm external dia and conduit FRLS accessories of ISI marks medium grade including 6.0 sqmm FRLS copper wire for earth continuity wire and connected of common earth dolly. Wire: Make -Mescab/Polycab/KEI/Havells/Finolex PVC conduit: Make -Polycab/Precision/Plaza Note:- (i)One run of conduit two run of 6 sq mm copper conductor & one run of 6.0 sq mm copper conductor is measured as one unit. (ii) On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit and its accessories. (iii) Cutting of wall, floor, PCC work and white wash for making of good to disturbed surfaces shall be included in the rate quated.

S&F in replacement single pole and neutral enclosure with a two pin and earth socket complete with one single pole MCB of 20 to 32 Amp 240 volt. Make:- Legrand/Hager/Schneider/IndoAsian/Siemens.

S&F sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps 240 volts double door (Metallic) type. Make:- Legrand/Hager/Schneider/IndoAsian/Siemens.

S&F MCB SP 6 to 32 Amps 240 volts 'C' series, 10 KA, 50 Hz, confirming to IS/IEC-60898-1. Make:- As approved Make of DB

Supply and fixing 18 W white light round surface mounted LED down light for ceiling complete all as specified and as directed by Engineer-in-Charge. Make Havells/Surya/Crompton/Philips

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

HARNAM SINGH ANIL SINGH (BID ID -3118035)

M/S SACHENDRA KUMAR JAIN (BID ID -3118324)

MS SHUBHAM SANTOSH JAIN (BID ID -3118335)