SPECIAL REPAIRS/ REPLACEMENT OF EXTERNAL ELECTRIC INFRA INCLUDING OF LT PANELS AT VARIOUS HANGARS AT AFS YELAHANKA

Fabricate, supply, install testing and commissioning in repairs of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire suitable for accommodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 600 Amps capacity, hinged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated and with following accessories suitable for incoming/outgoing arrangements complete all as specified and directed:- (a) ON Load changeover switch 4 pole 400 Amps, Incomer -1 No (b) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-02 Nos (c) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA-01 Nos (d) Digital VAF Meter-01 Nos (e) CT's 400/5- set of 3 No (f) LED type Indication lamps (RYB)-one set(for each incoming and outgoing) Note : (i) Contractor has to get the approval of drawings of LT panel from the Engr In Charge /GE before commencement of work. (ii) Switch gear and connected items should be of approved make. (iii) Bottom portion of panel should be 30 CM above from the ground level.

Fabricate, supply, install testing and commissioning inrepairs of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire suitable for accommodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 600 Amps capacity, hinged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated and with following accessories suitable for incoming/outgoing arrangements complete all as specified and directed:- (a) 4 Pole MCCB 315 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-01 Nos (b) 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-02 Nos (c) 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-02 Nos (d) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA,-01 Nos (e) Digital VAF Meter-01 Nos (f) CT's 315/5- set of 3 No (g) LED type Indication lamps (RYB)-one set(for each incoming and outgoing) Note : (i) Contractor has to get the approval of drawings of LT panel from the Engr In Charge /GE before commencement of work. (ii) Switch gear and connected items should be of approved make. (iii) Bottom portion of panel should be 30 CM above from the ground level.

Fabricate, supply, install testing and commissioning inrepairs of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire suitable for accommodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 600 Amps capacity, hinged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated and with following accessories suitable for incoming/outgoing arrangements complete all as specified and directed:- (a) 4 Pole MCCB 315 Amp, 50 Hz, 415 V with rupturing capacity 36 KA,-01 Nos (b) 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-02 Nos (c) 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-02 Nos (d) Digital VAF Meter-01 Nos (e) CT's 315/5- set of 3 No (f) LED type Indication lamps (RYB)-one set(for each incoming and outgoing) Note : (i) Contractor has to get the approval of drawings of LT panel from the Engr In Charge /GE before commencement of work. (ii) Switch gear and connected items should be of approved make. (iii) Bottom portion of panel should be 30 CM above from the ground level.

Fabricate, supply, install testing and commissioning inrepairs of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire suitable for accommodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 600 Amps capacity, hinged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated and with following accessories suitable for incoming/outgoing arrangements complete all as specified and directed:- (a) ON Load changeover switch 4 pole 320 Amps , Incomer -1 No (b) 4 Pole MCCB 250 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-01 Nos (c) 4 Pole MCCB 125 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-02 Nos (d) 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-02 Nos (e) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-01 Nos (f) Digital VAF Meter-01 Nos (g) CT's 400/5- set of 3 No (h) LED type Indication lamps (RYB)-one set(for each incoming and outgoing) Note : (i) Contractor has to get the approval of drawings of LT panel from the Engr In Charge /GE before commencement of work. (ii) Switch gear and connected items should be of approved make. (iii) Bottom portion of panel should be 30 CM above from the ground level.

Fabricate, supply, install testing and commissioning inrepairs of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire suitable for accommodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 600 Amps capacity, hinged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated and with following accessories suitable for incoming/outgoing arrangements complete all as specified and directed:- (a) 4 Pole MCCB 315 Amp, 50 Hz, 415 V with rupturing capacity 36 KA,-01 Nos (b) 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-04Nos (c) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-01 Nos (d) 4 Pole MCCB 32 Amp, 50 Hz, 415 V with rupturing capacity 16 KA-01 Nos (e) Digital VAF Meter-01 Nos (f) CT's 400/5- set of 3 No (g) LED type Indication lamps (RYB)-one set(for each incoming and outgoing) Note : (i) Contractor has to get the approval of drawings of LT panel from the Engr In Charge /GE before commencement of work. (ii) Switch gear and connected items should be of approved make. (iii) Bottom portion of panel should be 30 CM above from the ground level.

Fabricate, supply ,install testing and commissioning of inrepairs LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire Suitable for accommodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for outdoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 3.15mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 400 Amps capacity, hinged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated and with following accessories suitable for incoming/outgoing arrangements complete all as specified and directed:- (a) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 36 KA,-01 No , Incomer (b) 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 25 KA,-01 No (c) 4 Pole MCCB 100 Amp,50 Hz, 415V with rupturing capacity 25 KA- 01 No (d) 4 Pole MCCB 63 Amp,50 Hz, 415V with rupturing capacity 16 KA- 01 No (d) Multifunctional VAF meter -01 Nos (e) CT's 200/5- set of 3 No (f) LED type Indication lamps (RYB)-one set(for each incoming and outgoing) Note : (i) Contractor has to get the approval of drawings of LT panel from the Engr In Charge /GE before commencement of work. (ii) Switch gear and connected items should be of approved make. (iii) Bottom portion of panel should be 30 CM above from the ground level.

Fabricate, supply ,install testing and commissioning inrepairs of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accommodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for outdoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 3.15mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 400 Amps capacity, hinged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated and with following accessories suitable for incoming/outgoing arrangements complete all as specified and directed:- (a) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 25 KA, Incomer -1 No (b) 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA-03 Nos (c) 4 Pole MCCB 63 Amps , 50 Hz , 415V with rupturing capacity 25 KA -03 Nos (d) Digital Multifunctional VAF Meter -01 nos (e) CT's 200/5- set of 3 No (f) LED type Indication lamps (RYB)-one set (for each incoming and outgoing) Note : (i) Contractor has to get the approval of drawings of LT panel from the Engr In Charge /GE before commencement of work. (ii) Switch gear and connected items should be of approved make. (iii) Bottom portion of panel should be 30 CM above from the ground level.

Fabricate, supply ,install testing and commissioning inrepairs of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire suitable for accommodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for outdoor door use with bottom cable entry with suitable cable glands made out of CRCA sheet 3.15mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 600 Amps capacity, hinged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated and with following accessories suitable for incoming/outgoing arrangements complete all as specified and directed:- (a) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 25 KA, Incomer -1 No (b) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA-03Nos (c) 4 Pole MCCB 40 Amp, 50 Hz, 415 V with rupturing capacity 16 KA-04Nos (d) Digital Multifunctional VAF Meter -01 (e) CT's 200/5- set of 3 No (f) LED type Indication lamps (RYB)-one set Note : (i) Contractor has to get the approval of drawings of LT panel from the Engr In Charge /GE before commencement of work. (ii) Switch gear and connected items should be of approved make. (iii) Bottom portion of panel should be 30 CM above from the ground level.

Supply, install, testing and commissioning inrepairs of LT Panel board CPRI approved indoor type, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with aluminium bus bars duly insulated by insulation of RYB colour 300 Amps rating mounted on porcelain insulators .The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 50X50X5 mm duly embedded in PCC platform and duly powder coated with 7 tank process with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable all as directed at site and comprising of the following: - INCOMIMG: (a) 4 Pole MCCB 63Amp, 50 Hz, 415 V with rupturing capacity 25 KA, Incomer -1 No OUTGOING (b) 4 Pole MCCB 63Amp 25 KA - 02 Nos (c) 3 Pole MCCB 40 Amp 16 KA -04 Nos (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 200/5- set of 3 No (g) LED type Indication lamps (RYB)-one set

Supply, install, testing and commissioning inrepairs of LT Panel board CPRI approved indoor type, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with aluminium bus bars duly insulated by insulation of RYB colour 300 Amps rating mounted on porcelain insulators .The panels shall be factory made, double door, made out of 3.15 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 50X50X5 mm duly embedded in PCC platform and duly powder coated with 7 tank process with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable all as directed at site and comprising of the following: - INCOMIMG: (a) 4 Pole MCCB 200Amp, 50 Hz, 415 V with rupturing capacity 25 KA, Incomer -1 No OUTGOING (b) 4 Pole MCCB 63 Amp 25 KA - 05 Nos (c) 4 Pole MCCB 40 Amp 16 KA -03 Nos (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 200/5- set of 3 No (g) LED type Indication lamps (RYB)-one set