SPL REPAIR FOR CONVERSION OF LT OVERHEAD CONDUCTOR INTO LT UG CABLE WITH ALLIED INFRA OF PERIMETER SEC LIGHT AT VARIOUS LOCATIONS IN THE AOR OF AGE E/M UNDER GE 969 EWS

Dismantling old and unsv steel tubular poles of any type including breaking cement concrete complete and site clearance complete all as specified and directed.

Dismantling of cross arms of MS channel or angle sections etc. complete all as specified and directed.

Dismantling HT/LT OH line from the insulators complete all as specified and directed.

Dismantling and taking down the existing LT/HT insulators of any type from any description complete all as specified and directed.

Dismantling & taking out the existing old service cables off sizes complete all as specified and directed.

Dismantling old unserviceable existing LT panel with switch gears complete all as specified and directed.

Dismantling & taking out old unserviceable earthing complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 2 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.

M&L GI pipe light grade 50 mm bore for cable protection fixed to pole or under road/ pavement, complete including MS clamps, nuts, bolts etc all as specified and directed.

All as per ser item No 17 here-in-before but 80 mm dia

Supply, installation, testing and commissioning factory made and tested (including CPRI type test certified) LT panel board out door type, platform mounted, suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated copper bus bar 650 Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof. IP 65 class protection and made of 3.15mm CRCA MS sheet and 50mmx 50mm and 6 mm thick angle iron frame work, powder coated finish over one coat of red oxide primer out side and two coats of red oxide pri

M&L for earthing complete with galvanised steel earth plate electrode of size 60cms x 60cms x 6.0 mm thick buried directly in to the ground (earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to the galvanised earth strip 32 x 6 mm by means of bolts, nuts thimble check nuts and washers of galvanised iron or steel using GI including PCC (concrete chamber) 1:3:6 type C-1 (using 20 mm graded stone aggregate) with fair finish of internal surface concrete, 15mm thick plaster in CM 1:4, funnel with wire gauge of (0.68 mm) 8 mesh per inner inch, 80mm thick RCC Pit cover 320mm of RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) reinforced with XPM and charcoal dust and common salt all as shown in electrical plate No-3 MES SSR Part-I and specified including provision of earth wire/ strip protected by 40 mm dia medium grade GI pipe including all excavation and earth work & connecting the earth earthing to an earthing test point/ transformer neutral/ body LT panel etc and testing on complete, complete all as specified and directed Note :- Quoted rate of earthing shall be deemed to included cost of 7.5 M long galvanised iron strip 32X6 mm and protection pipe of 40mm bore medium grade, GI light grade 20mm bore watering pipe.

M&L for earthing complete with galvanised steel earth plate electrode of size 60cms x 60cms x 6.0 mm thick buried directly in to the ground (earth pit not less than 2.25 m deep below the ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point including testing on completion on complete all as specified and directed.

S&F RCC cable route marker for LT complete all as specified and directed

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth, for foundations, laying of pipes etc not exceeding 10sqm on plan for manholes etc and not exceeding 1.5 metre in depth and getting out in Soft/loose soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers not exc 25cm.in hard/dense soil complete all as specified and directed.

Removing excavated material not exceeding 50mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Supply and laying of burnt clay building bricks, sub-class B (old size) designation 75 laid flat in tranches for cable protection with wide equal to length of brick, complete all as specified and directed.

M&L for dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15cm thick after laying the cable all as specified in clause 19.75 of MES schedule part-1 complete all as specified and directed. Note:- (i) Sand shall be fine sand as specified for plastering. (ii) Only punned thickness shall be measured for payment.

Dismantling of ACSR or AAC conductor from pole of any size and capacity complete, all as specified and directed.

Taking down of old unserviceable UG cable from trench of any size and capacity complete, all as specified.

Returning filling in, of excavated soil in trenches including spreading, levelling, watering and well ramming in layers each layers n.exc 25cm thick in soft/loose soil complete all as specified.

Removal surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point all as specified and directed.

Supply and spread river sand to required width at bottom and top for cable cushioning all as specified in clause 19.75 of SSR part – I complete all as specified and directed. Note :- Thickness of sand will be measured after punning.

Supply, laying, jointing and testing LT XLPE and PVC insulated, screened, armoured, LT electric power cables (heavy duty) with aluminium conductor, 1100 Volts grade conforming to IS-1554 laid in trenches, pole, road crossing walls, floor etc. cross sectional area of 95 Sqmm 3.5 core complete all as specified and directed.

Supply, laying, jointing and testing LT XLPE and PVC insulated, screened, armoured, LT electric power cables (heavy duty) with aluminium conductor, 1100 Volts Grade conforming to IS-1554 laid in trenches, pole, road crossing walls, floor etc. cross sectional area of 10 Sqmm 4 core complete all as specified and directed.

Supply, laying, jointing and testing LT XLPE and PVC insulated, screened, armoured, LT electric power cables (heavy duty) with aluminium conductor, 1100 Volts Grade conforming to IS-1554 laid in trenches, pole, road crossing walls, floor etc. cross sectional area of 16 Sqmm 4 core complete all as specified and directed.

S&F galvanised iron tubing 40mm Dia, 'light grad complete with fitting for protection of cable with the pole complete all as specified as directed.

S&F GI pipe, bracket for street light fittings made out of GI pipe light grade 40mm dia 1.20m long bent to required angle/shape with and including necessary clamps, nuts, bolts & washers of suitable size and two coats of aluminium paint with a base coat of red oxide primer complete all as specified and directed.

S&F looping lookout fuse junction box of made out of thermo plastic Polycarbonate with IP 66/67 weather proof for outdoor installation of size 200x140x95mm (with knockouts of cable entry) protection with terminals and locking screw fitted with 3 phase with neutral Aluminium Bus Bar, 415 Volts, 50Hz and 6A MCB SP, suitable for cables off sizes and fixing on steel tubular pole at a height not less than 1.5m above ground level with the help of clamps two nos of F1 20 x 3 mm and suitable nuts and bolts, complete all as specified and directed.

Supply and lay cable PVC insulated unsheathed of size 1.5 Sqmm 3 core copper conductor for service connections from junction box to light fitting, complete all as specified and directed.

S&F LED street LED street light fitting 70 Watt 230 V AC outdoor type with high pressure dia cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Dismantling /disconnecting & taking down insulators of any size & capacity. complete all as specified and directed.

Dismantling of cross arms and MS channel or angle section etc complete all as specified and directed.

M&L steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31 (9.0 metres long) complete all as specified and directed.

S&F LT end termination joint 1100 V grade suitable for XLPE cable of size 16x4 core complete all as specified and directed.

S&F LT end termination joint 1100 V grade suitable for XLPE cable of size 10x4 core complete all as specified and directed.

S&F LT cable marker made up of 6 mm MS sheet 10 cm dia welded with 6 mm 1 mtr length angle iron duly coated red oxide and two coats of red enamel paint written as "LT MES" erected by 1:2:4 PCC foundation 50 cm below ground level as directed by Engr -in - Charge.