8161-Provn of Minor Works

Amount

M&L aluminium anodised snap grid 605x605mm false ceiling using wall angle with main tee section of size 34.5X24.5X1.5 mm and cross Tee section 24.5X24.5X1.5mm. The snap grid shall be supported at ends all along the walls with anodized aluminium angle of size 40mm x 25mm x 2mm, weighing 0.36 kg/Rm including 6mm dia GI suspenders (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilng cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia, 40mm long complete all as specified and as directed.

S&F 9mm thick prelaminated particle boards, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination of size 60cm x 60cm suitably placed in false ceiling grid made of Aluminium all as specified and as directed.

S & F in replacement energy saving recessed LED ceiling panels 34/36W Suitable for 600 x 600mm modular ceiling grid.

S&F Tamper proof Three phase 4 wires 415 volts AC Electronic energymeter of Accuracy class-1, Digital type in Polycarbonate body conforming to IS-13779 and CBIP technical report 88 of capacity 10-60 Amps complete including fixing with exsisting pannel board complete all as directed. Note : panel board to meter and meter to panel board wire will be measured paid relevent item as below.

S&F Tamper proof Single phase 230 volts AC Electronic energymeter of Accuracy class-1, Digital type in Polycarbonate body conforming to IS-13779 and CBIP technical report 88 of capacity 10-40 Amps complete including fixing with exsisting pannel board complete all as directed. Note : panel board to meter and meter to panel board wire will be measured paid relevent item as below.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 4.0 sqmm including one run of 1.5 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including 25mm rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down sub main wiring (or) power wiring complete upto 4 runs of 10 Sqmm in PVC conduit taken as credit and making good the disturbed surfaces of wall, etc all as specified and directed. Note :- 2 runs of 4 sqmm cable, one run of 1.5 sqmm cable and one run of 25 mm dia rigid PVC conduit shall be measured as one length.

All as per item No 06 here-in-before but with 4 runs of 10 sqmm all as specified and as directed. Note :- 4 runs of 10sqmm cable cable and one run of 25 mm dia rigid PVC conduit shall be measured as one length.

All as per item No 06 here-in-before but with 2 runs of 6 sqmm and one run of 4 sqmm all as specified and as directed. Note :- 2 runs of 6 sqmm cable, one run of 4 sqmm cable and one run of 25 mm dia rigid PVC conduit shall be measured as one length.

Supply and fixing ventilating (EXHAUST FAN) fans of 250mm sweep, Non metallic PVC body white in colour, single phase including necessary addn/altn for fixing of fans including makig hole on wall/windows all as per site requirement and making good the disturbed surfaces matching with the existing wall all as specified and directed. Make: USHA/HAVELLS/C&G

Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including 20mm dia non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories fixed on wall / ceiling with suitable clamps, screws, etc or concealed in wall including modular terminal box with white cover plate with frame for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed for One Exhaust fan point controlled by one switch.

S & F Modular switch 1 way 6A, 1 module, 240 Volts complete all as specified and directed. Make Indoasian Cat Part No 800000 or equivalent in Anchor Roma/Anchor

S & F Ceiling rose surface bakelite 65mm x 50mm two to three terminals all as directed.

Supplying, installing, testing & commissioning of split type air conditioners inverter type of capacity 1.5 ton, 5 star rating with copper condensor coil, wall splits unit indoor/outdoor, cordless remote control unit, mounting brackets with nuts & bolts copper pipe & powercord with insulation etc including all accessories as per site conditions all as specified and directed. Make : Lloyd/LG/Blue Star/Hitachi.

Supply & Fix wall mounted voltage stablizer 4 KVA with copper winding, digital voltmeter, input range 120v-280v and output range 210v - 250v. Make : V Guard.

S & F Single pole and neutral enclosure 20A with a two pin and earth plug and socket complete with one single pole MCB.

M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft / loose soil for laying cables / pipes / erection of poles etc all as specified and as directed.

Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and as directed.

Returning, filling in, soil including spreading levelling watering well ramming in layers not exceeding 25 cm each all as specified and as directed.

Supplying and laying burnt brick "B" class standard size for cable cover all as directed.

Supply, lay, spread in trenches river sand including spreading, levelling, punning for cushioning of cable all as directed. Note :- Punned thickness only measured and paid.

Supply & Lay cable LT XLPE insulated screened PVC bedded, gaivanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 2 core 16 sqmm all as specified and as directed.

Material and labour for PCC 1:3:6 type C2 40 mm graded aggregate for making a good distrubed surfaces of road/pavement/footpath etc complete all as specified and directed.

S & F Sheet metal enclosure for MCB DB double door, Single pole and neutral 240 volts, 4 way with 100 amps rated bus bar all as specified and as directed. Make: Standard/Legrand/L&T

Supply & Fix MCB SPN 230 volts, 40 amps 'C' Curve 10 kA Capacity all as directed. Make: Standard/Legrand/L&T

Supply & Fix MCB SP 230 volts,40 amps 'C' Curve 10 kA Capacity all as directed. Make: Standard/Legrand/L&T

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in trenches or in floors, 75mm bore.

S&F PVC (SWR) bend 75 mm bore.

M &L GI tubing 15mm dia medium grade galvanised with all fitting complete fixed to walls and ceiling or laid in floors

M&L GI tubing 20 mm dia medium grade galvanised with all fitting complete fixed to walls and ceiling or laid in floors

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical 3 layered with closed top) 1000 ltrs capacity hoisted and fixed in position all as specified in SSR Part I

S&F 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule.

PVC connections 15mm size with PTMT nuts of length 450mm

S&F Angle cock Fancy type 15 mm bore chromium plated with long shank and cup (Concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions

S&F Gun metal gate valves with iron wheel head screwed both end for iron pipe and fixed 25mm bore .

S & F Powder coated Anodised aluminium (minimum 15 micron) frame for doors, windows, ventilators and grills/guard bars etc with one or more rebates including joining cleat for fixing etc. complete all as specified.

S & F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S & F Sheet glass 4.8 mm thick, ordinary quality, glazing with oil putty and ground or obscured or frosted, on one side in square n exc 0.5 sq. m in each pane.

M&L for 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.50 Sqm and n exc 4 Sqm each.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick joint free coloured tiles area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over and including screed bed or bedding layer of mortar 15 mm thick in Cement mortor 1:4 for laying floor finishes.

M&L Glazed ceramic coloured joint free tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed or bedding layer of mortar 10 mm thick in Cement mortor 1:3 for laying floor finishes.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in trenches or in floors, 110 mm bore.

S&F PVC (SWR) bend 110 mm bore.

S&F PVC (SWR) floor trap with grating including jointing to solvent cement wast pipe 75 mm dia.

S&F for Butt hinges 100mm, stainless steel hinge pin, anodised and fixed, type C-21

S&F aluminium anodised barrel tower bolts of extruded section 200mm size.

S&F extruded Aluminium alloy handles fabricated type anodised 150mm long.

M&L for preparing plastered or unplastered old surfaces of wall by brooming down or steel wire brushing down smoke soot, moulds, moss and efflourescent salt and trading oil and grasy spots and applying one coat of cement based paint white or tinted complete.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store

Supply and fix Health faucet with hose & hook (1200mm long) fixed in repairs. all as directed Make- Parryware CAT NO. T9937A1.(Make : Parrryware or equivalent)

Supply and fix Tubular aluminium anodised towel rail, 20mm dia, D type, 60cm long between flange

S&F Bib taps 15 mm bore chromium plated crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule

S&F 'P' or 'S' Trap 100 mm dia

S&F Vitreous china wash down water closet (pedestal pattern) , white, of style and pattern as existing, complete with and including plastic seat cover, white fixed all as directed. Make: Hindware / Parryware)

S&F PVC valveless, syphonic action type, flushing cistern 10 Ltr capacity, low level, white, with inlet,ball valve, float and handle including brackets, low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any and fixing complete

PVC connections 15mm size with PTMT nuts of length 450mm

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings.

Supply and fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F in repairs to vitreous china urinasl, half stal type, white with grating and union for discharge pipe and waste coupling suitable for urinals all fiting for urinal.

M/S.RANGA AND CO

DJ Group