SPECIAL REPAIRS REPLACEMENT OF EXTERNAL ELECTRIC SUPPLY NETWORK AND ALLIED WORKS AT VARIOUS LOCATION AND OLD CFL LIGHT FITTING TO LED LIGHT FITTING AT JL WING OF ASC CENTRE AND COLLEGE UNDER GE CENTRAL BANGALORE

Amount

Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth aying of cables , stay etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft rock complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mts and depositing where directed .at a level not exceeding 1.5 M above the starting point complete all as directed.

M&L for PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate in coping of poles & stays including necessary form work & domolition of damged existing coping of poles complete all as specified and directed. (Note : Quoted rate is deemed to be inclusive of formwork & demolition of damged coping in poles).

Supply , laying screening excavated earth (passing through 12 mm square mesh) laying riddled earth in trenches for cable protection , under & above cable all as specified in SSR -Part I (Clause No 19.75) complete all as directed. (Note:(i) Punned thickness riddled earth of 18 cm will be measured and paid.(ii) Screeing of excavated earth shall be done in presence of Rep of Engineer-in-charge & once EIC has completely satisfied with the above said screeing process then permit to use in the work. (iii) Quoted rate is deemed to be inclusive of screening excavated earth).

Supply and laying sub class 'B' bricks of old size (standard size as per local availability) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge

Supply and fixing GI tubing light grade 50 mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor /wall along with suitable size of MS claps , nuts & bolts etc complete all as specified and directed .

All as per item No 07 here-in-before but dia of pipe 40 mm -do- ( Note for item No 7 & 8 : Excavation / earth work shall be measured and paid separately under relevant items of Sch ‘A’

Supply & Laying in trenches or fixing on wall or passing through pipe or in cable ducts, 1100 volts grade 4 core 10sq mm XLPE insulated , armoured, electric power cables (heavy duty) with standard aluminium conductor including testing on completion coplete all as directed. Note: The rate quoted inclusive of termination at ends with suitable aluminium lugs wherever required.

All same as per item No 09 here-in-above but 16 Sqmm 4 core

All same as per item No 09 here-in-above but 25 Sqmm 4 core

All same as per item No 09 here-in-above but 3.5 core 35 Sqmm

All same as per item No 09 here-in-above but 3.5 core 50 Sqmm

All same as per item No 09 here-in-above but 3.5 core 70 Sqmm

All same as per item No 09 here-in-above but 3.5 core 95 Sqmm

All same as per item No 09 here-in-above but 3.5 core 120 Sqmm

M&L for PVC insulated 2X2.5sqmm multistrand Aluminium conductor for connection of Securiry light to OH or Pole Box including maing necessary connections and testing on competion complete all as directed.

M&L for PVC insulated 2 x1.5sqmm + 1x 1.5 sqmm earth wire single core copper conductor for connection of post top lantern to Pole Box with PVC conduit complete all as specified and directed.Make: Plaza/Polycab/Finolex

Material and labour for cable jointing kit for LT cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 25 to 50 Sqmm complete all as specified and as directed.

All as per item No. 19 here-in-above but 3.5 core 70 Sqmm to 150 Sqmm -do-

S & F Pole box of size 250x200x105mm ,made of high quality thermoplastic polysterene dust & jet water proof, chemical, acid corrision, impact, insulated & shock proof including terminals 4Nos and including fixing arrangement on pole any type complete all as specified and as directed. Make :Sintex /Emitter/Spelberg /Hensel

Supply and fixing post top lantern LED type 20 watt ,warm white 230 volt AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion complete with driver and lamp including pole box complete all as specified and directed by Engr-in-charge.

Supply and fixing post top lantern LED type 30 watt white 230 volt AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion complete with driver and lamp including pole box complete all as specified and directed by Engr-in-charge.

S & F Tmelite 40 A 3 pole /230 V Digital time switch, pole mounted single door outdoor type totally enclosed for street light controlling panel incl fixing arrangement with 40X5mm clamp 2 Nos with nuts and bolts complete accessories.

Supply & fixing in repairs 4 Pole MCCB , 415 Volts , Adjustable type with breaking capacity 36 KA , 400 Amps rated of following current carrying capacity including necessary connecting terminals to bus bar, nut bolts etc complete all as directed .

All as per item No. 25 here-in-above but 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 36 KA, 250 Amp rated -do -

All as per item No. 25 here-in-above but 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 36 KA, 200 Amp rated -do -

All as per item No. 25 here-in-above but 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 36 KA, 160 Amp rated -do -

All as per item No. 25 here-in-above but 4 Pole MCCB, 415 V, Adjustable type with breaking capacity 25 KA, 100 Amp rated -do -

Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP – 31), 09 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole with and including necessary earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 mtr, PCC (1:4:8) type D-2 (using 40 mm graded sand stone aggregate) in the base and foundation upto ground level and PCC (1:2:4) type B-1 (using 20 mm graded black trap/granite/basalt stone aggregate) for coping of the pole including necessary form work including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint and including making alternate white and black strips 30 cms height (05 Nos strips) numbering the poles by 2" height 06 Nos letters complete all the metallic surfaces all as specified and directed by Engineer-in-Charge.

S&F 300W flood ligts fitting energy saving and environmental friendly long life LED flood light made up of innovative die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC compartment with IP66 protection,lumen efficancy of LED >140lm/w,,power factor >_ .95,and impact resistance of IK 07 with over voltageprotection, output open/short circuit protection,10KV Built-in Surge Protection COMPLETE all accessories and electrical connection.

S&F 150W flood ligts fitting energy saving and environmental friendly long life LED flood light made up of innovative die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC compartment with IP66 protection,lumen efficancy of LED >140lm/w,,power factor >_ .95,and impact resistance of IK 07 with over voltageprotection, output open/short circuit protection,10KV Built-in Surge Protection COMPLETE all accessories and electrical connection.

Supply and fix in repair 36 watt LED Light 4 x 1 White Surface/recessed mounted type LED luminare with polymer diffuser complete with accessories suitable for armstrong/Grid ceiling with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size & testing on comletion complete all as directed.

Supply and fix in repair 36 watt LED Light 2' x 2' LED luminare surface/recessed mounted with polymer diffuser complete with accessories suitable for armstrong/Grid ceiling with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size & testing on comletion complete all as directed.

Providing trenchless bore using using ultra sounding technique and necessary machine bore of pipe size 200 mm dia suitable for 0.4 mpa working pressure mechanical numatic drilling equipment for passing water pipe line upto 200 mm dia under the existing bituminous/WBM road/PCC hard standings, depth range not less than 1.0 mtr and upto 1.5mtr and making good to the distrubed surfaces of road to match with its existing specifications all as specified and as directed by engr-in-charge at site. Note : 1. Quoted rates deems to be inclusive of transportation charges of Drilling machine, connected accessories and passing pipe through bore complete with required accessories. 2. Pipe will be measured and paid separately. 3. Any damage to MES assets caused during trenchless bore shall be recitfied by the contractor at his own cost.

Supply, fabrication, installation and testing of LT out door type factory made(CPRI Approved ), junction box of size 900mm(H)X700mm(B)X400mm(W) (over all dimension ) made out of 3.15mm thick CRCA sheet dully supported with mild steel angle iron of size 40X40X5 mm frame, 04 Nos aluminium bus bar of of capacity 250 Amps with drilled hole for incoming/outgoing cable connection with necessary alumiium lungs, GI nuts bolts and washer and 160Amp MCCB 01 No including 08 Nos bridge insulator DMC , heavy duty, suitable for 3 Phase 4 wire system, one danger notice plate of 1.6mm thick mild steel sheet, vitreous enameled white with letters, figures and conventional skull & bones in signal red colour and fixed in front door size and PCC (1:3:6) type C-2 foundation 0.30m above normal ground level & 0.30m below ground level with necessary exacavation and earth work and painting to internal and external steel surface with powder coated (Siemence gray) RL-35 after neccesary preparation of surfaces including Indicating lamp LED type 240V 50 Hz AC -one set of 3 compete all as directed.

Design, Fabrication, supply, installation, commissioning and testing Double Door Panel board manufactured from CPRI approved firm with canopy head, out door, cubical type panel board of over all min dimension 1.2 m (L) X 1.00m (H) X 0.50m (W) fabricated with 3.0mm thick CRCA sheet on mild steel angle iron 50X50X6 mm thick frame, totally enclosed type dust & vermin proof back side open-able fixed with hinged shutter and front side open-able with hinged shutter and locking arrangement for individual MCCBs/MCBs , powder coated finished both internally and externally suitable for 415Volt AC 50 Hz 3 Phase 4 wire system by means of Alluminium bus bar of 800 Amps Capacity (Main bus bar ) and 800 Amps Loop Bus bar with coloured insulating tape/sleeves mounted on porcelain or synthetic insulators with provision for fixing MCCBs/MCBs necessary inter connections with Aluminium bar/strip duly coloured code insulation and providing under mentioned equipments & accessories including connections of all out going/in coming existing/New cables of required size and including PCC foundation in 1:3:6, type C1 of 0.5 mtrs height above GL and 0.30mtrs below GL including necessary earth work complete all as specified and as directed. (a) INCOMING: MCCB 4 pole 400Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No Make: L&T/Legrand/ ABB/Siemens/Havells (b) OUTGOING: MCCB 4 pole 200Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals -03 Nos Make: L&T/Legrand/ ABB/Siemens/Havells (c) O/G MCCB TPN 100-63Amp, 16KA,C curve - 02 Nos . Make: Legrand cat No 408683 or equivalent model of L&T/ ABB/Siemens/Havells. (d) Indicating lamp LED type 240V 50 Hz AC -one set of 3 .Make: L&T/Legrand/ ABB/Siemens/Havells

Design, Fabrication, supply, installation, commissioning and testing Double Door Panel board manufactured from CPRI approved firm with canopy head, out door, cubical type panel board of over all min dimension 1.2 m (L) X 1.00m (H) X 0.50m (W) fabricated with 3.0mm thick CRCA sheet on mild steel angle iron 50X50X6 mm thick frame, totally enclosed type dust & vermin proof back side open-able fixed with hinged shutter and front side open-able with hinged shutter and locking arrangement for individual MCCBs/MCBs , powder coated finished both internally and externally suitable for 415Volt AC 50 Hz 3 Phase 4 wire system by means of Alluminium bus bar of 400 Amps Capacity (Main bus bar ) and 800 Amps Loop Bus bar with coloured insulating tape/sleeves mounted on porcelain or synthetic insulators with provision for fixing MCCBs/MCBs necessary inter connections with Aluminium bar/strip duly coloured code insulation and providing under mentioned equipments & accessories including connections of all out going/in coming existing/New cables of required size and including PCC foundation in 1:3:6, type C1 of 0.5 mtrs height above GL and 0.30mtrs below GL including necessary earth work complete all as specified and as directed. (a) INCOMING: MCCB 4 pole 250Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals - 01No Make: L&T/Legrand/ ABB/Siemens/Havells (b) OUTGOING: MCCB 4 pole 160Amp,Icu=Ics=25KA, Adjustable thermal and adjustable Magnetic setting with extended terminals -02 Nos Make: L&T/Legrand/ ABB/Siemens/Havells (c) O/G MCCB TPN 100-63Amp, 16KA,C curve - 02 Nos . Make: Legrand cat No 408683 or equivalent model of L&T/ ABB/Siemens/Havells. (d) Indicating lamp LED type 240V 50 Hz AC -one set of 3 .Make: L&T/Legrand/ ABB/Siemens/Havells

M& L for Earthing of machinery/ equipment installed at power house /substation, using Galvanised Iron earth plate eletcrode of size 600 x 600 x6 mm thick as buried directly in ground (earth pit not less than 3mtr below normal ground level connected to GI earth strip 32 mm x 6 mm thick by means of bolts nuts,check nuts and washers at complete etc all as shown in electrical plate No-5 of SSR part-1 connected to earthing test point all as specified or indicated including PCC pit in PCC(1:3:6) type CI MS frame 50mm thick pre cast RCC (1:1½ :3) nominal mix cover slab reinforced with 8mm dia mild steel bar including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc 50mtr and funnel with watering pipe wire mesh GI protection pipe 40 mm bore including testing earthing complete all as specified and directed by Engineer-in-Charge.

Papai Enterprises (BID ID -3242318)

kamadhenu Electricals (BID ID -3239359)

M/S - KRUPA ELECTRICALS (BID ID -3242631)

Chandana Enterprises (BID ID -3242648)

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd (BID ID -3243586)

K T ASSOCIATES (BID ID -3243412)

Shiva Shakthi Electrical Enterprises (BID ID -3243925)

Vasavi Electricals (BID ID -3243725)