Construction of additional infrastructure such as barracks, kitchen, dining, sewerage network and overhead water tank in new/ existing buildings at CISF establishment of Nalco Mines, Damanjodi

Amount

PART A (CIVIL PORTION)

Transporting the Fly Ash Bricks, including loading, unloading, etc., from Alumina Refinery to Mines up to the lead of 20.00 km, all complete as per the direction of Engg-in-charge

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of soil

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains, including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains , including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m., Ordinary rock

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains , including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Hard rock (blasting prohibited)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top Smooth. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)

Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, slabs,plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)

Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns, etc as directed by Engineer-in-Charge.

Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. as directed by Engineer-in-Charge.

Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform as directed by Engineer-in-Charge.

Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers as directed by Engineer-in-Charge.

Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts as directed by Engineer-in-Charge.

Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Stairs, (excluding landings) except spiral-staircases as directed by Engineer-in-Charge.

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum.) All works upto plinth level Excess/less cement used as per design mix is payable/recoverable separately). (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum.)All works above plinth level upto floor V level M-25 (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)

Bending/binding Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(REINFORCEMENT STEEL/TOR STEEL SHALL BE ISSUED FREE OF COST AT NALCO's STORE) , Hot rolled deformed bars

Providing and fixing tapered / parallel threaded couplers conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”, to reinforcement bars including threading, enlargement at connection by forging, protecting the prepared reinforcement bars and related operations as required to complete the works per direction of Engineer-in-Charge. (The length of the bars in which coupler is to be provided should not be less than 4 metre, no deduction for labour and binding wire saved for not providing lap length shall be made).Coupler for 16 mm diameter reinforcement bar

Coupler for 20 mm diameter reinforcement bar

Coupler for 25 mm diameter reinforcement bar

Half brick masonry with clay fly ash F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.) (FLY ASH BRICK WILL BE ISSUED FREE OF COST AT FLY ASH BRICK PLANT IN ALUMINA REFINERY) Cement mortar 1:4 (1 cement :4 coarse sand)

Brick work with clay flyash brick upto plinth level in : Cement mortar 1:6 (1 cement : 6 coarse sand) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.) (FLY ASH BRICK WILL BE ISSUED FREE OF COST AT FLY ASH BRICK PLANT IN ALUMINA REFINERY)

Brick work with clay flyash brick in superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.) (FLY ASH BRICK WILL BE ISSUED FREE OF COST AT FLY ASH BRICK PLANT IN ALUMINA REFINERY)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : ( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE). , Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing stone slab with table rubbed, edges rounded andpolished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinalpartitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood

Providing and fixing flush door shutters decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including Stainless Steel butt hinges with necessary screws

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. ( All required structural steel materials for this item shall have to be procured by the contractor). Fixed to steel windows by welding or inserted to the walls

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete : 125x90x4.00 mm

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125x75x4 mm

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:100x75x4 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. 125 mm :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat . Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall becovered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.

Providing and fixing to existing door frames. 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Structural steel WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 25x6mm for diagonal braces and central cross piece. (Structural steel WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE).

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Providing and fixing Ist quality ceramic glazed wall tiles (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per M2, including pointing in white cement mixed with pigment of matching shade complete. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)

Providing and laying Ceramic glazed floor tiles of size as approved by Engineer-in-Charge (thickness to be specified by the manufacturer) of 1st quality of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with J or L hooks, bolts/power driven rivets and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpetwashers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheetscomplete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (CGI SHEET/ AND PGI SHEET SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE)

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m². (CGI SHEET/ AND PGI SHEET SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE)

Providing and fixing on wall face unplasticised Rigid PVC for soil & waste discharge system as per IS 13592, including jointing with seal ring , leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Providing and fixing on wall face unplasticised Rigid PVCfor soil & waste discharge system as per IS 13592, including jointing with seal ring , leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVCfor soil & waste discharge system as per IS 13592, including jointing with seal ring, leaving 10 mm gap for thermal expansion. Coupler 75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC for soil & waste discharge system as per IS 13592, including jointing with seal ring, leaving 10 mm gap for thermal expansion. Coupler 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC for soil & waste discharge system as per IS 13592, including jointing with seal ring, leaving 10 mm gap for thermal expansion. Single pushfit Coupler 75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC for soil & waste discharge system as per IS 13592, including jointing with seal ring, leaving 10 mm gap for thermal expansion. Single pushfit Coupler 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC for soil & waste discharge system as per IS 13592, including jointing with seal ring, leaving 10 mm gap for thermal expansion. Single tee with door 75x75x75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC for soil & waste discharge system as per IS 13592, including jointing with seal ring, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC for soil & waste discharge system as per IS 13592, including jointing with seal ring, leaving 10 mm gap for thermal expansion. Single tee withOUT door 75x75x75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC for soil & waste discharge system as per IS 13592, including jointing with seal ring, leaving 10 mm gap for thermal expansion. Single tee withOUT door 110x110x110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVCfor soil & waste discharge system as per IS 13592, including jointing with seal ring , leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC for soil & waste discharge system as per IS 13592, including jointing with seal ring , leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC for soil & waste discharge system as per IS 13592, including jointing with seal ring, leaving 10 mm gap for thermal expansion. Shoe (Plain) 75 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC for soil & waste discharge system as per IS 13592, including jointing with seal ring, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm bend

Providing and laying 15mm thick cement plaster in cement mortar 1:6 (1cement: 6sand) on the rough sides of single or half brick wall or masonary work using approved type sand including curing etc. all complete for all heights.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).(CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Providing and laying 6mm thick cement plaster to ceiling of nominal mix 1:3 (1 cement: 3 sand) using approved Nowra- ngpur or Boriguma river sand including screening, necessary curing etc, all complete (at any height).(CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE).

Providing Neat cement punning. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

White washing with lime to give an even shade :, New work (three coats)

Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coats on new work

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : , Two coats on new work

Demolishing cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as per directionof Engineer - in - charge Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within50 metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually/ by mechanical meansin R.C.C. or R.B. work (Payment shall be made on the crosssectional area of R.C.C. or R.B. work) as per direction of Engineer - in -charge.

Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Demolishing stone rubble masonry manually/ by mechanical meansincluding stacking of serviceable material and disposal ofunserviceable material within 50 metres lead as per direction ofEngineer-in-charge :In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead : Of area BEYOUND 3 sq. metres

Dismantling steel work in built up sections in angles, tees, flats andchannels including all gusset plates, bolts, nuts, cutting rivets, weldingetc. including dismembering and stacking within 50metres lead.

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of : G.S. Sheet

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : Above 40 mm nominal bore

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Kitchen sink with drain board 510x1040 mm bowl depth 250 mm. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Kitchen sink without drain board 610x510 mm bowl depth 200 mm.(CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.(CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Supply & Fixing Flush pipe with union spreaders and clamps all in C.P. brass for single stall

C.P. Brass angle valve 15 mm

C.P. brass waste 32 mm

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms

Providing and fixing PVC floor trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 110 mm inlet and 110 mm outlet

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing Internal Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

20 mm nominal outer dia Pipes. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 80 mm dia nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore

50 to 80 mm nominal bore

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore

32 mm nominal bore

80 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet: 150 mm diameter

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

80 mm nominal bore

Providing and fixing PTMT grating of approved quality and colour. Circulary type , 100 mm nominal dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia outer dia Pipes.(CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

25 mm nominal outer dia Pipes. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

32 mm nominal outer dia Pipes. (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE).

Providing and fixing square-mouth PVC gully trap complete with grating brick masonry chamber with water tight cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE).

Grading roof for water proofing treatment with, Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in charge complete.Upto 5mm depth and 5 mm width

Providing & appling Nitobond EP Hardener at junction of old & new face of Concrete as per direction of E-I-C.

Supplying of branded waterproofing agent for adition in fresh concrete like Dr. fixitpidiproof LW+ or equivelent as per Engineer in charge

Supplying & applying of branded waterproofing agent for adition in mortar for plaster like Dr. fixitnew coat or equivelent as per Engineer in charge

Supplying & applying of branded waterproofing agent at kitchen & bathroom or similar wet areas like Dr. fixitpid fin 2k or equivelent as per Engineer in charge

Supplying & fixing of PVC water bar at construction joints of hydrolic structure confirming to IS: 4461:1998. Or as required by E-I-C.

PART B (ELECTRICAL PORTION)

Supply & installation ,testing and commissioning of Three-phase ,double door metal flush and surface mounted type TPN distribution board suitable for 415 volt, legrand cat ref-507897, 8 way,IP-43,IK 09,as per IEC-61439-3 ,with 100 amp copper busbar ,Neutral bar,earth bar and cable management, duly prewired with 125A, 50 kA,MCCB as incomer, 06 nos. 32 A DP MCB as sub in commer,4 nos of 20 amp DP MCB,C-curve for out going and 10 nos of 20 amp single pole MCB,C-curve for out going including all bus bar links ,4nos of blinds and other accessories. Make Legrand only. The scope includes termination of wires, assembling of parts etc of the board if any, chipping of wall, making good the same after work, including cement work , painting & wall white washing with the same make of paint (if required )

Installation and testing of ,3 blade, 1200 mm sweep ceiling fan .

Supply, installation and testing of Energy efficient , 3 blade metal , 450 mm sweep,1400rpm , heavy duty exhaust fan equivalent to havells model Fusion ES of make Havells/Khaitan/ GEC /USHA/ /Ortem only

Supply, installation and testing of Energy efficient , 3 blade metal , 300mm sweep,1400rpm , heavy duty exhaust fan equivalent to havells model Fusion ES of make Havells/Khaitan/ GEC /USHA/ /Ortem only

Supply & installation of 1x 22 W energy saving ,surface or pendant mounting ,white power coated CRCA steel housing universal LED batten suitable for 20 watt T8 LED tube with G13 lamp holder,supplied with one nos of glass T8 led tube,double side connection with inbuilt driver unit and decorative end caps equivalent to havells LED batten item description-REGAL BATTEN8UPTO 1X22 WSSBSWH and LED tube item description-CRYSTAL1213T8 DSTL20WLED865 GLASS., including supply and fixing of down rods. Make Philips/HAVELLS/WIPRO /syska only with supply of all fixing hardwares .

Supply & installation of 2x 22 W energy saving ,surface or pendant mounting ,white power coated CRCA steel housing universal LED batten suitable for 20 watt T8 LED tube with G13 lamp holder,supplied with two nos of glass T8 led tube,double side connection with inbuilt driver unit and decorative end caps equivalent to havells LED batten item description-REGAL BATTEN8UPTO 2X22 WSSBSWH and LED tube itm descriptio-CRYSTAL1213T8 DSTL20WLED865 GLASS., including supply and fixing of down rods. Make Philips/HAVELLS/WIPRO /syska only with supply of all fixing hardwares .

Supply & installation of 10w energy saving ,surface mounting ,white power coated polycarbonate decorative housing with high efficiency pressur die cast heat sink ,Heavy duty inbuilt driver unit equivalent to Havells make item description -INTEGRANEOUSURFACEDLS 10W LED840S.Make-Philips/HAVELLS/WIPRO/syska only with supply of all fixing hardwares .

Supply & installation of 18 module metal flush modular type boxes legrand cat no-6890 12 with 18 module white cover plate with frame ,cat no-5757 90 including wal chipping, making good the same with supply of cement & paint.

Supply & installation of 12 module metal flush modular type boxes, legrand cat no-6890 11with 12 module white cover plate with frame,cat no-5757 70 including wal chipping, making good the same with supply of cement & paint.

Supply & installation of 8 module metal flush modular type boxes legrand cat no-6890 42with 8 module white cover plate with frame,cat no-5757 50including wal chipping, making good the same with supply of cement & paint.

Supply & installation of 8 module metal flush modular type boxes legrand cat no-6890 10with 8 module white cover plate with frame,cat no-5757 40 including wal chipping, making good the same with supply of cement & paint.

Supply & installation of 4module metal flush modular type boxes , legrand cat no-6890 09 with 4 module white cover plate with frame ,cat no-5757 30 ,supply of 20 nos of blanking including wal chipping, making good the same with supply of cement & paint.

Supply and fixing of 6 Amp single pole,one way modular switch with indicator legrand cat no-5734 01

Supply and fixing of 6 Amp 2/3 pinsocket legrand cat no-5734 70

Supply and fixing of 20 Amp single pole,one way modular switch with indicator legrand cat no-5720 63

Supply and fixing of 6/16 Amp 3 pin indian universal socket legrand cat no-573467

supply and fixing of 120 watt fan step regulator legrand cat no-5734 63

Supply and fixing of RJ 45 UTP outlets legrand cat-0742 81

Supply and drawing of 10 pair ,0.5 mm insulated unarmoured telephone cable in the recessed pvc conduit

Supply and drawing of 10 pair ,0.5 mm insulated unarmoured UTP cable in the recessed pvc conduit

Concealed wiring with supply and drawing of FR PVC insulated 1.5 sq. mm. multistrand ,single core,copper flexible cable in the existing recessed pvc conduit, of L&T, Finolex, Lapp or equivalent reputed make certified by E-I-C only as per IE standardwith suitable colour coding(2x1.5 sqmm + 1x1.5 sq mm earth wire) including chipping of wall, cement plaster & making good the same with supply of cement & paint (if req.) and as per direction of the Engineer-in-Charge

Concealed wiring with supply and drawing of FR PVC insulated 2.5sq. mm. multistrand ,single core,copper flexible cable in the existing recessed pvc conduit, of L&T, Finolex, Lapp or equivalent reputed make certified by E-I-C only as per IE standardwith suitable colour coding(2x2.5 sqmm + 1x2.5 sq mm earth wire) including chipping of wall, cement plaster & making good the same with supply of cement & paint (if req.) and as per direction of the Engineer-in-Charge

Concealed wiring with supply and drawing of FR PVC insulated 4sq. mm. multistrand ,single core,copper flexible cable in the existing recessed pvc conduit, of L&T, Finolex, Lapp or equivalent reputed make certified by E-I-C only as per IE standardwith suitable colour coding(2x4 sqmm + 1x 4 sq mm earth wire) including chipping of wall, cement plaster & making good the same with supply of cement & paint (if req.) and as per direction of the Engineer-in-Charge

Concealed wiring with supply and drawing of FR PVC insulated 6 sq. mm. multistrand ,single core,copper flexible cable in the existing recessed pvc conduit, of L&T, Finolex, Lapp or equivalent reputed make certified by E-I-C only as per IE standardwith suitable colour coding(2x6 sqmm + 1x 6 sq mm earth wire) including chipping of wall, cement plaster & making good the same with supply of cement & paint (if req.) and as per direction of the Engineer-in-Charge

supply and laying of 25 mm dia pvc conduit along with accessoriesin surface /recess including cutting the wall and making good the same and as per direction of E-I-C

Making of earth pits including escavation in hard soil of size 10 ft. X 2 ft. X 2 ft. & resurfacing with black cotton soil, including supply and erection of 10 ft. X 20 mm copper electrode or copper coated solid stainless steel earth electrode and supply and filling of special earth enhancement compound GEM,Make ericoo/ABB make earthing compound/, earth rod clamps complete with brick in cement mortar chamber and RCC cover, watering funnel. All materials except cement have to supplied by the bidder.

Installation and testing of 25 ltr fully automatic storage water electric gyser .

Supply ,Installation ,testing and comissioning of 160 A,4-pole,switch disconnector fuse unit with CRCA sheet steelenclosure including cable glanding and socketing .supply of gland and socket is under scope of vendor.

Transportation of cable from mines central store and laying of one number of pvc insulated and pvc sheathed power cable 1.1 kv grade from 50sq. mm up to 150 sqmm size direct in ground including excavation in soft rock and all kind of soil(trench size 300mm wide x 800 mm depth),sand cushioninig, protecting cover with burnt clay bricks on the top and refilling of trench with excavated soil. supply of sand and brick shall be in the scope of vendor.

NRUSINGH CHARAN BEURA

M/S AMULYA CONSTRUCTION

CACTUS PROFILES PVT LTD

Pramod Kumar Nayak