SPL REPAIR TO BLDG NO P 307 AT BAIRAGARH SPL REPAIR OF WING WALL INCLUDING PROVN OF GRANITE CLADDING AT MAIN GATE OF 21 CGSR AREN AT BAIRAGARH AND SPL REPAIR FOR RENOVATION OF 03 X TOILET BLOCKS AT BLDG NO P 44 OF CHQ AT 3 EME CENTRE UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down chowkhats or frame nexc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed

Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F of aluminium powder coated windows having three track with aluminium section 92 x 31.75 mm having weight of bottom section 1.070 kg/m, top & styles of 0.933 kg/m, shutter section 40 x 18 mm (weight of handle section 0.417 kg/m) other section of 0.547 kg/m, mounted on bearing to slide on tracks in approved shade with and including 5mm thick plain glass and stainless steel wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with silicon sealants and making it water proof in all manner complete all as specified and directed.

S&F of factory made single extruded WPC (Wood polymer composite) soild door/window /ceosetory windows and other frames/chowkat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fib (wwod powder/rice husk/wheat husk) and fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minumum frame densit of 750 kg/cum screw withdrwal strenth of 2200 N (Face) and 1100 N (Edge) minumum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with properly of being termite/border proof, water /moisture proof and fire retardant and fixed in position with MS hold fast/ lug/ SS dash fasterrs of required dia and length complete all as specified and directed.

S&F of factory made 30mm thick single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter high density comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: Builders hardware shall be measured and paid separately.

S&F of factory made single extruded WPC (Wood polymer composite) soild door/window /ceosetory windows and other frames/chowkat of size 50x125mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fib (wwod powder/rice husk/wheat husk) and fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minumum frame densit of 750 kg/cum screw withdrwal strenth of 2200 N (Face) and 1100 N (Edge) minumum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with properly of being termite/border proof, water /moisture proof and fire retardant and fixed in position with MS hold fast/ lug/ SS dash fasterrs of required dia and length complete all as specified and directed.

S&F of factory made 35mm thick single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter high density comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: Builders hardware shall be measured and paid separately.

S&F for factory made 30 mm thick solid WPC wire mesh door shutters decorative type laminated of required size comprising of virgin PVC resin of K Value 57-60 (Suspension grade), calcium carbonate and natural fibres (Wood wood powder/ rice husk/ wheat husk) and non toxic additives, made from exrusion process WPC foam sheet single extruded (Inner) with having min density not less than 600 Kg/Cum, having good screw holding capacity (Screw withdrawl strength 2000 N (face) & 1100 N (Edge), Min compressive of 50N/mm2, modulas of elasticity 850 N/mm2 and resistence of spread of frame of class A catagory with property of being termite / borer free, water/moisture proof and fire retardent. WPC to be laminated with PVC foil of min 14 microns thick of approved design pasted on both faces of shutter . For fixing mosquito mesh and XTN aluminium mesh combinely panel area of door except styles and rails to be panelled with mesh with self tapping round headed screws at required distence, screws and edges covered with feathered PVC edge beading alround of mesh and fixing Stainless steel butt hinges of required size with with necessary full body threaded star headed counter shunk SS screws complete all as specified and directed. Note for item No. 4 to 8: Material test certificate and authentication of manufacturing company shall be provided by the contractor.

M&L for cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in bed blocks, lintels, cills, steps, seismic and other similar bands, kerbs, coping, benching and like etc incl necessary form work complete all as specified and directed.

S&F of mild steel framed work as in grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F of 100 mm long stainless steel butt hinges, medium weight and fixed to chowkhats with screws complete all as specified and directed.

S&F of 100mm long stainless steel handles of 10mm dia and fixed to frames with screws complete all as specified and directed.

S&F of 150 mm long stainless steel barrel tower bolts of extruded section and fixed with screws complete all as specified and directed.

S&F of 250mm long stainless steel sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20mm thick granite stone work (any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not other wise specifically provided for complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) (nominal mix) as in foundations including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for rough flat concrete surfaces complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; for rough finished concrete surfaces complete all as specified and directed.

Demolition of cement concrete in ground floor (unreinforced) and paving n exc 15 cm thick (below or above GL) incl tiling if any complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection, aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, sub base and mass concrete complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the permises complete all as specified and directed.

M&L for polished glazed vitrified tiles 9 to 10 mm thick of size 1200 x 600 mm as in floors etc; over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles complete all as specified and directed.

M&L for polished glazed vitrified tiles 9 to 10 mm thick of size 1200 x 600 mm as in dado, skirting and similar work over and including 10 mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for coloured highlighter tiles on vertical surface of size 350 x 250mm / 450 x 350mm & 7mm thick, over and including 10 mm thick rendering in CM 1:4 for backing of tiles, set aand jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc; over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles complete all as specified and directed.

Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick/concrete surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick/concrete surfaces, finishing the surfaces even and smooth without using extra cement using water proofing compound as per manufacturer instructions complete all as specified and directed. Note: WPC will be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for applying two or more coats of damp proof coarse (Primeless high build water based elastomeric exterior wall waterproof acrylic coating for exterior surfaces) designed with weather resistant acrylate polymers, UV resistant and good hiding and spreading, developing a strong intercoat adhesion with the substrate therefore no separate primer is required, features such as waterproofing, UV protection, anti algal resistance, crack bridging of elastic films covering hair line cracks, long term protection, colour variants including preparation of surfaces by cleaning the surfaces till it is free from dust, grease and flaking paint, any unstable paint to be removed, using high pressure wash or scraper, whichever is appropriate, algae and fungus on the wall to be removed by using high pressure wash or coir brush and shall be treated with fungicidal solution, all surface cracks upto 5 mm width should be filled up with crack-X paste, cracks more than 5 mm and all separation gaps should be filled up with URP modified mortar complete all as specified and directed and comprising of following operations:- Note: (i) Application for verticle surface fresh plaster or repainting surfaces. (ii) Brush/ roller apply a self priming coat on the vertical wall surface in SSD condition, diluting 1 litre with 100 ml clean potable water and allow it to dry for 4-6 hours. (iii) Apply a coat without dilution as waterproof top coat, either by roller or brush with force coverage at the rate of 3.7- 4.1 Sqm / litre to achieve DFT of 100- 110 microns and allow it to dry for 4- 6 hours. (iv) An additional coat should be applied in case of horizontal surfaces like the top of windows, ledges, parapet wall etc.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and as directed. Note: Putty shall be measured and paid for separately under respective item.

M&L for applying of 3mm thick white wall care putty on walls, finished even and smooth complete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means and applying two coats of oil emulsion distemper over a coat of white cement based putty complete all as specified and directed. Note: (i) Cement Putty shall be measured and paid separetely. (ii) Complete removal of existing surface to be carried out using mechanical scrappers and wiped clean with cotton cloth so that no dust/loose particles remain on the surface.

M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of acrylic emulsion distemper over a coat of putty finishing the surface even and smooth complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying textured exterior emulsion paint of required shade (two or more coats @ 3.28 ltrs/10 Sqm) over and including priming coat with external pimer @ 2.20 ltrs/ 10 Sqm complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of acrylic emulsion distemper over a coat of putty finishing the surface even and smooth complete all as specified and directed.

S&F of 4.00 mm thick sheet glass, frosted or plain one side and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F of 12mm thick tuffened designer glass fixed on steel pivot and SS frame to the wall complete with fittings/accessories with engravings/ designs/ symbols to the pattern and style as approved complete all as specfied and directed. Make: Pilkingston/ Ultra Clear/ Modi Guard/ Saint Gobain/ Atul as approved by GE.

S&F in replacement PVC moulded cabinet with front mirror of size 350 x 450mm with single shutter and minimum 5 compartment complete all as specified and directed. Make: Prayag/ Polytuf/ Sintex as approved by GE.

S&F in repairs 25mm dia curtain rod of stainless steel pipe with and including fancy type brackets, stops, rollers etc; fixed on walls with screws complete all as specified and directed.

S&F in repairs wash basin mixer, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, screwed down high pressure, screwed for iron pipe of 15mm bore complete all as specfied and directed. Note: Make : Jaquar Cat No: CQT-CHR-23169B or equivalent in Hindware/ CERA.

S&F in repairs Soap dish holder of premium material for long lasting duarbility complete all as specfied and directed. Note: Make: Jaquar Cat No ACN 1131N or equivalent in Hindware/ CERA.

S&F in repairs Towel ring Made of premium material for long lasting duarbility complete all as specfied and directed. Make: Jaquar Cat No ACN 1121N or equivalent in Hindware/ CERA.

S&F in replacement wash down water closet pan with seat cover, waste pipe, cistern with lid, sheet covers & fittings (complete set) complete all as specfied and directed.

S&F in replacement stainless steel sink with drainage board of 1.00 mm thick sheet for kitchen with plug, washers and ss waste coupling and pvc waste pipe including bedding in cement mortar 1:4 on to dwarf/parapet wall or fixing with granite with pointing in white or grey cement to match and connecting union to pipe of overall size 915 x 460mm & bowl size 410 x 330 x 160mm complete all as specified and directed.

S&F in repairs bib cock two way with flange, brass, fancy type, chromium plated screwed down for iron pipe of 15mm bore and fixed complete all as specified and directed. Make Jaquar Cat No: FLR-CHR-5041 N or equivalent in Hindware/ CERA.

S&F in repairs towel rack, 600mm long with lower hangers, brass chromium plated of premium quality complete all as specified and directed. Make Jaquar Cat No AKP 35781 PS or equivalent in Hindware/ CERA..

S&F in repairs toilet paper roll holder, brass chromium plated of premium quality complete all as specified and directed. Make: Jaquar Cat No AKP-35751 P or equivalent in Hindware/ CERA.

S&F in repairs hand shower (Health faucet) brass chromium plated of premium quality with 8mm dia & 1 meter long flexible tube and wall hook complete all as specified and directed. Make: Jaquar Cat No- ALD - CHR 573 or equivalent in Hindware/ CERA.

S&F in repairs looking mirror of 5mm thickness of approved quality with wooden back and edge beading complete all as specified and directed.

S&F in repairs stainless steel grating doom 100 mm dia with or without waste hole complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F of 75mm bore PVC (SWR) floor/ nahani trap, plain with grating including jointing with solvent cement complete all as specified and direcetd.

S&F in repairs brass chromium plated wall mixer with provision for overhead shower with 115mm long bend pipe, connecting legs & wall flanges for cold and hot water, fancy type with capstan head, screwed down for 15 mm bore pipe complete all as specified and directed. Make: Jaquar Cat No. FUS-CHR-29273 UPR or equivalent in Hindware/ CERA..

S&F in repairs stop cock (angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with capstan head, screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed. Make: Jaquar Cat No. ALI-CHR-85053 or equivalent in Hindware/ CERA..

S&F in repairs stop cock, two way (angle valve) cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with capstan head, screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed. Make: Jaquar Cat No. MQT-ESS-526AKN or equivalent in Hindware/ CERA..

S&F in repairs bib taps, cast copper alloy, chromium plated with capstan head, screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed. Make: Jaquar Cat No. ALI-85037 or equivalent in Hindware/ CERA.

S&F in repairs stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with capstan head, screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed.

Taking up or down 15 mm bore GI steel tubing and connections complete all as specified and directed.

Taking up or down 20 mm bore GI steel tubing and connections complete all as specified and directed.

Taking up or down 25 mm bore GI steel tubing and connections complete all as specified and directed.

S&F of 15 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed.

S&F of 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed.

S&F of 25 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors (concealed type) complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in landings, cover slabs, precast man hole covers and set in CM 1:4 complete all as specified and directed.

Excavating in trenches n exc 1.5m deep and n exc 1.5 m wide for foundation etc and getting out in hard/dense soil complete all as specified and directed.

Demolition and breaking up of 150 mm dia of drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed in cement mortar 1:3 complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2, concrete bed to drain pipes 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in walls / laid in trenches/floors and jointed in solvent cement complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointed in solvent cement complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) bends and jointed in solvent cement complete all as specified and directed.

S&F of PVC (SWR) vent cowl 110 mm complete all as specified and directed.

Returning filling in any type of soil including spreading levelling watering and well ramming in layers n. exc 25 cm complete all as specified and directed.

Removing excavated material to a distance exc. 250 m but n exc. 500 m and depositing where directed at a level n exc 1.5 mtr above starting point complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F of rolled mild steel work as in rafter, purlins, trusses and like (beam, tee, angle, channel or flat sections) including necessary welding, bolting, reviting etc. as required at site of steel Fe 410-W (Gde E-250 quality) complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings, including ridge complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed

S&F in repairs stainless steel kitchen plate rack, made up of 0.63 mm thick stainless steel sheet, overall minimum size: 900x750x250 mm fixed to walls with brass screws complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.

S&F in repairs 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, both faces is covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick sheet and all around side faces is covered with decorative lipping as in cup board/ cabinet shutter and shelves and fixed with wooden frame-work complete alll as specified and directed.

S&F for hydraulic soft close auto hinges, thickness 1-1.5 mm, size 8 Inchs, brass finish of 90 Degree opening angle silver colour complete all as specified and directed.

S&F of drawer/ cupboard handles, projection drop (65mm to 75mm) on screwed plate of brass, bright finished and fixed complete all as specified and directed.

S&F of mortice lock, brass 4 levers vertical type, size 100 mm and fixed with screws complete all as specified and directed.

S&F of 100 mm long hasp and staple, safety type, SS with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs telescopic channel of size 450 mm (when closed), for fixing kitchen basket, mild steel chromium plated, roller type, heavy duty fixed to wooden/ metal frame with screws complete all as specified and directed.

S&F in repairs kitchen basket fabricated with stainless steel section (SS-304) of best quality of size 430 x 508 x 200mm for different use such as placing plain plate/ dish/ cup & saucer /cutlery / thali etc fixed in position on telescopic channel complete all as specified and directed.

S&F in repairs kitchen basket fabricated with stainless steel section (SS-304) of best quality of size 430 x 508 x 100 mm for different use such as placing plain plate/ dish/ cup & saucer /cutlery / thali etc fixed in position on telescopic channel complete all as specified and directed.

S&F in repairs decorative laminate, 0.9 mm type 1 of surface finish, colour and pattern as approved and fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

Taking down existing water proofing treatment of any description incl PCC padding, cement plaster any thickness from roof surfaces, cleaning of roof and prepairing it for further treatment incl make good necessary dubbing out wherever required and removing rubbish from site complete all as specified and directed.

M&L for provn of water proofing treatment to RCC roof with APP modified membrane with and including comprising of following steps:- (a) Applying 10 mm thick screed bed in CM 1:4 mixed with and incl water proofing compound @ 3% by weight of cement applied over roof slab. (b) Surfaces of the roof, parapet and gutters, drain mouths etc. shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the grove shall be cut around to tuck in the treatment as pipes, chimney stacs etc. and other similar situations to ease up about corners. (c) All joints & turns in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml per bag of cement and well cured. (d) Fillets of PCC 1:2:4, type B-0 of 100 x 100 mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. (e) Applying bituminous primer conforming to IS: 3384-1965 @ 0.30 Kg/Sqm on prepared surface till the surface is properly impregnated. (f) Applying two coats of hot blown bitumen 85/25 grade to concrete surfaces @ 1.5 Kg/ sqm each coat. (g) Applying APP modified water proofing membrene with non woven polyster reinforced weight not less than 3 Kg/Sqm of thickness not less than 3 mm having thermal insulation with white plain or aluminium colour coating on upper side of membrane uniformely embedded during manufacturing process laid on the primed surface by torch application method as per manufacturers instructions.

Dismantling of water storage tanks of capacity exc 500 ltrs but n exc 1000 ltrs complete all as specified and directed.

S&F of 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layers, hoisted and fixed in position as specified in SSR Part I with and including 20mm dia PTMT ball brass valves with polythene float and flynut complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for mild steel TMT bars, 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thisk PCC in 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base, hard standing and similar work; finishing concrete surface even and rough complete all as specified and directed.

M&L for clan dry sand cushioning for laying of interlocking paver block in layers complete all as specified and directed.

M&L for non-skid ceramic, matte finish tiles of 400x400 mm and 10mm thick heavy duty parking/ pathway tiles for outdoor area laid over and including 15mm thick screed bed in CM 1:6 and jointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block reflective type (glossy finish) any shape and size of 60 mm thick, M-35 Grade with grey cement and pigments to match with existing complete all as specified and directed.

M&L for light shade non skid ceramic tiles 8-10 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc; over and including 20mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 450 x 300 x 7mm thick in vertical surface such as dados, skirting etc; set and jointed over and including 10 mm thick rendering in CM 1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick/concrete surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coats of oil bound distemper over a coat of putty where required, complete all as specified and directed. Note : putty shall be measured and paid separately in the respective item

S&F in replacement PVC low level flushing cistern of 10 ltrs capacity with all internal fittings incl 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe 15mm bore complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, oval type, table top of size 425x340x175 mm over granite stone slab of approved make decorative type including brass CP waste coupling and PVC waste pipe complete all as specified and directed. Make: Jaquar Cat No: CNS WHT 903 or equivalent in Hindware/ CERA as approved by GE.

S&F in repairs single lever high neck basin mixer without popup waste with 600 mm long braded hoses, fancy type, screwed for pipe 15mm bore and fixed complete all as specified and directed. Make: Jaquar Cat No: ARI CHR 39005B or equivalent in Hindware/ CERA as approved by GE.

S&F for replacement of stainless steel jet spray with holder for EWC complete all as specified and directed.

S&F of 20 mm bore UPVC pipes of pressure rating 10 kgf/cm2 with fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repairs 32mm bore PVC waste pipe for wash basin complete all as specified and directed.

S&F in repairs vitreous china urinal, full stall type, white (excluding flushing cistern) but including PTMT urinal spreader, brass waste coupling and PVC waste pipe complete all as specified and directed.

S&F in repairs vitreous china squatting pan "Orissa" pattern size 580x440 mm white with integral foot rest (exculding flushing cistern and flush pipe) but including cement concrete bedding as required complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed in walls and jointed with solvent cement complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius 75 mm dia and fixed with solvent cement complete all as specified and directed.

Dismantling of timber scantling as in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section in any position for unframed works complete all as specified and directed.

S&F of mild steeel work of angle iron and rolled section as in main and cross beams hip, jack rafters, hollow section purlins, posts, where connected to common rafters and running rails and guides for sliddinng doors fixed with angle cleats or other connecting plates of grade Fe-410 complete all as specified and directed.

Dismantling of wall and celing hard boards/ sheets and plywood of any thickness and in any position including cover fillets complete all as specified and directed.

S&F of false ceiling fabricated of powder coated galvanised cold rolled steel section framed work of grid size 600 x 600mm, 24x38x0.60mm Tee (at bottom) and 24x24x0.50mm thick (wall angle) galvanised cold rolled steel section including expansions fasteners as in ceiling complete all as specified and directed. Make : Gabson or equivalent as approved by GE.

S&F of 4mm thick of decorative type calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 595 x 595 mm size grid complete all as specified and directed.

S&F of 5.5mm thick black tinted glass of approved quality, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L for powder coated aluminium sections (minimum thickness of powder coating 50 micron) frames for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F of factory made solid PVC moulded door shutter with solid particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick wall nut colour moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F of 6 mm thick aluminium composite sheet for aluminium doors, cut to size and fixed to frames complete all as specified and directed.

S&F of door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width aluminium extruded section body complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf of 12 cm with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf of 8 inchs with chromium plated bracket guard and railing complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in foundation, footings, plinth beams, bases of columns etc complete all as specified and directed. Note: Reinforcement shall be measured and paid seperately.

M&L for reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in columns, pillars, posts, struts etc complete all as specified and directed. Note: Reinforcement shall be measured and paid seperately.

M&L for reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed. Note: Reinforcement shall be measured and paid seperately.

Use and waste for formwork to concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed.

Use and waste for formwork to to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. for rough finished surfaces complete all as specified and directed.

Refixing of old GI tubing and connections of 20mm bore in new or old position including cleaning internally and externally, any grade/make laid in trenches/wall/floor/ceiling with and including new fittings i.e. sockets, tee, union, elbow etc; complete all as specified and directed.

Refixing of old GI tubing and connections of 25mm bore in new or old position including cleaning internally and externally, any grade/make laid in trenches/wall/floor/ceiling with and including new fittings i.e. sockets, tee, union, elbow etc; complete all as specified and directed.

S&F in repairs PTMT float valve high pressure with high density plastic ball, with epoxy coated aluminium rod, screwed for 25mm bore iron pipe and fixed complete all as specified and directed

S&F of gun metal globe or gate valves, conforming to IS: 778 with iron wheel head, screwed both ends for iron pipe 25mm bore and fixed in existing complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for concealed point wiring with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories (PVC casing and caping of size 25 mm, ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS multi stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly including sunk sheet steel terminal box concealed in wall with and including modular cover plate with frame of suitable size as required at site for mounting of fittings like switches, sockets, fan regulators etc. fixed with screws complete all as specified and directed.

(a) One light /Fan/Exhaust/bell point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps on independent board.

(c) One 3 pin socket outlet on same board.

All as per item No. 151 here-in-before but wiring with 2.5 Sqmm FRLS multi stranded copper conductor cable for one 5/15 Amps socket outlet controlled by one switch on independent board and 2 Sq mm FRLS PVC insulated multistranded copper conductor cable as continuous earth wire complete.

All as per item No. 151 here -in- before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for one 5/15 Amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.

S&F of modular switch, 1 way, 6 A, 240 V, 1 module complete all as specified and directed.

S&F of ceiling rose surface bakelite two to three terminal complete all as specified and directed.

S&F of lamp holder of polycarbonate body with back plate with and including 9/10 Watt LED bulb complete all as specified and directed.

S&F of modular socket, 6 A - 2/3 pin combined 2 module complete all as specified and directed.

S&F of modular socket 6 A/16 A - 2/3 pin combined 2 module complete all as specified and directed.

S&F of modular switch, 1 way, 16 A, 240 V, 1 module complete all as specified and directed.

S&F of Buzzer, Ding Dong type, 230 Volts AC and fixed with screws complete all as specified and directed.

S&F of modular bell push 6 A, 240 V, 1 module complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm multi stranded copper conductor, FRLS, PVC insulated, unsheathed cable with and including rigid non metallic PVC conduit medium grade, ISI marked, 25 mm dia for sub main wiring and 6 Sqmm FRLS, PVC insulated and unsheathed stranded copper conductor cable as earth wire in surface/recess and making good to the disturbed surfaces to match the existing surfaces including taking down existing unserviceable sub main of any type and size complete all as specified and directed. Note:- Two runs of 6 Sq mm copper conductor cable, one run of 6 Sq mm copper conductor and one run of PVC conduit will be measured as one unit.

S&F of LED tube light fitting 1 x 20 Watt, 220 V, AC decorative box type with driver, holder including making connection with 1 Sqmm flexible copper conductor cable 3 core of suitable size from ceiling rose complete all as specified and directed.

S&F of LED light fitting, mirror type with high output diffuser, 2 feet long, 10 W, 220 V, AC decorative type with driver holder and LED lamp including making connection with 1 Sqmm flexible copper conductor cable 3 core of suitable size complete all as specified and directed.

S&F of LED light fitting 1x9/10 Watt, bulk head luminiaries with LED driver, holder including making connection with 1 Sqmm flexible copper conductor cable 3 core of suitable size from ceiling rose complete all as specified and directed.

S&F of LED 24 Watt recess mounting light fitting (2 x 2 luminaire) with white powder coated CRCA housing with high power LEDs and aluminium front frame with flat white high power transmission acrylic cover including making connection with 1 Sqmm flexible copper conductor cable 3 core of suitable size and taking down existing u/s light fitting patti type complete all as specified and directed.

Taking down main switches/MCB DBs of any capacity/type including MCBs complete all as specified and directed.

S&F of sheet metal enclosure for MCCB DB, TPN, 4 Way, double door as incomer (Vertical type double door) and suitable to fix SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP-43 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.

S&F of sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 Amps rated busbar, 8 way double door, factory made conforming to IS:13032 fabricated out of CRCA sheet not less than 1.2mm thick fitted with DIN channel, neutral link complete all as specified and directed.

S&F of MCCB, triple pole, 415 Volts, fixed type, 125 Amp with breaking capacity 30 KA complete all as specified and directed.

S&F of MCB, SPN, 32 to 40 Amps, 10 KA breaking capacity, C-series including connection with suitable size copper lugs complete all as specified and directed.

S&F of MCB, SP, 6 to 32 Amps, 10 KA breaking capacity, 'B' Curve including connection with suitable size copper lugs complete all as specified and directed.

S&F in replacement sheet metal enclosure with socket plug top with two pin and earth plug and socket with and including one single pole MCB, 32 Amps, 240 V complete all as specified and directed.

S&F in replacement ceiling fans complete with blades, down rods and accessories of 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) with and including hook for hanging ceiling fan complete all as specified and directed.

S&F of LED building security light luminaire of 60 Watt comprising of pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with all fixing arrengement, nuts, bolts and washer and connecting to electric system with 2.5 Sqmm PVC aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole complete all as specified and directed.

S&F of 250mm sweep exhaust fan made of study engineering plastic complete with louvers shutter, 230 V, 50 HZ, 1200 RPM of copper winding with all accessories including making hole in stone/brick wall and grouting suitable size nuts/bolts & making good in CM 1:4 in all respects and making necessary connection with flexible cable of required size complete all as specified and directed.

S&F in repairs 450mm sweep exhaust fan made of powder coated steel with blades, frame and louvers shutter, voltage 230 V, 50 Hz, 1200 RPM and making necessary connection with flexible cable of required size complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground vertically at a depth not less than 2.25 m and top edge of plate at a depth not less than 1.50 m below GL, connected to earthing lead of galvanized steel wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised steel from earth plate to test point upto 7.5m including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 15 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing compelete all as specified and directed. Note : Earth continuity conductor including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate.

Cutting chases pining in brick, concrete walls built in cement mortar and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of shelves, lintels etc; and cutting chases for concealed water tubing cutting of girth not exc 10 cm girth complete all as specified and directed.

S&F of PVC flat twin core aluminium conductor cable of size 1.5 Sqmm complete all as specified and as directed.

S&F in replacement 45 Watt, LED POST TOP, IP-65, elegantly designed die-cast aluminium housing and high grade aluminium heat sink for efficient thermal management, studiness and excellent corrosion resistance, 3 nos die-cast aluminium arms to support housing, powder coated black after phosphochromate treatment complete all as specified and directed.

M&L for sand filling in trenches for cable cushioning with clean, dry and unwashed sand, free from sharp particles including gently punning around cable complete all as specified and directed.

Supply and laying precast concrete cable covers, class LV, type I, flat, size 250mm x 150mm x 40mmfor cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed.

Supply and laying of 1100 Volts grade heavy duty XLPE cable of size 10 Sqmm 2 core, with aluminium conductor stranded polythylene insulated, served with and including sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, laid in trenches/floor or fixed on wall/pole complete all as specified and directed.

S&F in replacement GI tubes, 'light grade' galvanised of 50 mm bore, with all fitting and laid in floors, under road, pavement or hard standing for protection of UG cable complete all as specified and directed.

S&F in replacement GI tubes, 'light grade' galvanised of 40 mm bore, with all fitting and laid in floors, under road, pavement or hard standing for protection of UG cable complete all as specified and directed.

M&L for cutting PCC/floor/road not more than 0.30 x 0.30 m in section and taking out cable and making good with and including PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as per existing after laying of pipe complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 49907.00

M/S Shanti Traders

AJIT ENTERPRISES

R K Sales