Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.4 L
EMD Value
₹6,800
Closing Date
17 Jan 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Directorate of Municipal Administration
Rajendra
Construction of Handicapped Toilets in Taluk Office Premises in Tiptur CMC Limit
DMA/2023-24/OW/WORK_INDENT11543
DMA/2023-24/OW/WORK_INDENT11543
Open
Other Works
Two Tender Document System(Two Cover)
DMA City Municipal Council Tiptur
5 documents required · 5 mandatory
Work-done Certificate for having executed Same Nature of work, in last previous Five years in any of the Government/ Public Sector Undertaking total amount not less than 50 percent of amount put to the tender
Should be valid Eligible Class registered Contractor in KPWD Civil Licence for Civil Work or Electrical Licence for Electrical Work with in there registered jurisdiction
Annual Financial Turnover in the last 5 years period achieved in at least any 2 financial years an average annual financial turn over not less than the estimated cost
Liquid Assets or Availability of Credit facility not less than 30 percent of Amount put to the Tender Credit Lines or Letter of Credits or Certificates Unconditional from banks for Meeting the fund Requirement etc Usually 30 percent of the amount of Contract with name of work or Indent number only
Sales tax and GST Details, Income tax details PAN Card No issued by Income Tax Dept
₹500
₹6,800
1 Jan 2024
1 Jan 2024
19 Jan 2024
4 Jan 2024
Construction of Handicapped Toilets in Taluk Office Premises in Tiptur CMC Limit
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification.
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, prov...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required, to...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied at 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust,...
Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metalsash putty of approved make, or metal beading with screw...
Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW1.pdf
Tender Document • 0.80 MB
EST.pdf
Others - ESTIMATE • 1.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .