CERTAIN REPAIR TO STEEL FURNITURE AND CHAIR CB STEEL AT MILITARY STATION SRI GANGANAGAR

Amount

S&F in replacement locking device of brass bright finish, six lever with keys in duplicate for each lock to almirah steel large/medium complete all as specified and directed by Engineer- in- charge.Drg No. FD-67(M) FD-243(M) as applicable

S&F in replacement locking device of brass bright finish, six lever with keys in duplicate for each lock to drawers/lockers to table office (Officer/Clerk) complete all as specified and directed by Engineer - in – Charge. Drg No. FD-84(M)

S&F in replacement 3 way locking system made out of 10mm dia Mild steel Rod to almirah large steel complete all as specified and directed by Engineer- in- charge. Drg No. FD-67(M)

S&F in replacement 3 way locking system made out of 10mm dia Mild steel Rod to almirah medium steel complete all as specified and directed by Engineer - in – Charge. Drg : FD-243(M),67 (M) as applicable

S&F in replacement handles steel chromium plated suitable for almirah medium/Large steel complete all as specified and directed by Engineer- in- charge.Drg : FD-243(M) FD-67(M) and as applicable

S&F in replacement 'G' clamps suitable for re-fixing of shelves of almirah large/Med steel with machine screws complete all as specified and directed by Engineer- in- charge.

S&F in replacement Pedestals locker steel made out of 1.00mm thick plain black iron sheet including one coat of synthetic enamel (silver grey) paint over one coat of red oxide primer to locker steel complete all as specified and directed by Engineer - in – Charge.Drg : FD-257

S&F in replacement Pedestals locker steel made out of 1.00mm thick plain black iron sheet including one coat of synthetic enamel (silver grey) paint over one coat of red oxide primer to almirah medium steel complete all as specified and directed by Engineer- in- charge.Drg : FD-243(M)

S&F in replacement Pedestals locker steel made out of 1.00mm thick plain black iron sheet including one coat of synthetic enamel (silver grey) paint over one coat of red oxide primer to almirah large steel complete all as specified and directed by Engineer-in-Charge. Drg : FD-67(M)

S&F in replacement handles alluminium anodised 100mm long 'D' type of locker steel complete all as specified and directed by Engineer- in charge. Drg : FD-257 (M)

S&F in replacement hasp & staple aluminium anodised 75mm x 40mm x 3mm thick safety type of locker steel complete all as specified and directed by Engineer-in-Charge. Drg No. FD-257(M)

S&F in replacement shelves made out of PBI sheet 1mm thick made to shape as per drawing and painted with one coat of synthetic enamel paint (silver grey) over a coat of red oxide primer of almirah large Steel complete all as specified and directed by Engineer-in-Charge. Drg : FD-67M

S&F in replacement shelves made out of PBI sheet 1mm thick made to shape as per drawing and painted with two coats of synthetic enamel paint (silver grey) over a coat of red oxide primer of almirah medium steel complete all as as specified and directed by Engineer-in-Charge. Drg : FD-243

S&F in replacement top of table office (officer) steel made from 18mm thick melamine shade pre-laminated particle board including 4mm thick teakwood beading alround complete all as specified and directed by Engineer-in-Charge. Drg : FD-84(M)

S&F in replacement top of table office (clerk) steel made from 18mm thick melamine shade pre-laminated particle board including 4mm thick teakwood beading alround complete all as specified and directed by Engineer-in-Charge. Drg : FD-84

S&F in replacement drawer of table office (officer) steel made out of 1mm thick PBI sheet duly painted with one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Drg : FD-84(M)

S&F in replacement drawer of table office (clerk) made out of 1mm thick PBI sheet duly painted with one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Drg No. FD-84(M)

M&L for repairing such as welding, lapping, turning, riveting bolting etc to drawers of table office steel (Officer/ clerk) to make them in serviceable condition complete all as specified and directed by Engineer-in-Charge. Drg : FD-84(M)

M&L for running welding in repairs to the steel furniture having thickness 3mm and 25mm to 30 mm in length with gas welding including preparing the surfaces beveling etc as required complete all as specified and directed by Engineer-in-Charge

S&F in replacement GI bucket for receptacle with bucket made out of 22 gauge PGI sheet complete all as specified and directed by Engineer-in-Charge. Drg : FD-43(M)

S&F in replacement top of table steel size 900 x 900 x 760mm, made out of 18mm thick melamine shade pre-laminated particle board including 4mm thick teakwood beading alround complete all as specified and directed by Engineer-in-Charge. Drg : FD-1009

S&F in replacement Box of desk made out of 18 mm thick pre-laminated partical board including 4mm thick teak wood beading complete all as specified and directed by Engineer-in-Charge Drg : FD-107 (M) & FD-1021

S&F in replacement Top of table size 900mmx600mm, made out of pre-laminated particle board 18mm thick including 4mm thick TW beading alround complete all as specified and directed by Engineer-in-Charge. Drg : FD-1008 & FD-1007

S&F in replacement Drawer of table size 900mmx600mm, made out of 1mm thick PBI sheet duly painted with one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer - in – Charge. Drg : FD-1008 & FD-1007

S&F in replacement Lock device of table size 900mmx600mm complete all as specified and directed by Engineer - in – Charge. Drg : FD-1008 & FD-1007

S&F in replacement members of frames of table size 900mmx600mm, made out of mild steel 25mm square tube 16 gauge wall thickness including cutting welding bending etc duly painted with one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. Drg : FD-1008 & FD-1007

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of almirah large steel inside and outside complete all as specified and directed by Engineer-in-Charge. Drg : FD-67(M)

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of almirah steel medium complete all as specified and directed by Engineer-in-Charge.Drg : FD-67(M)

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of locker steel complete all as specified and directed by Engineer-in-Charge.Drg : FD-257

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of Book shelf open large steel and rack steel adjustable 6 tiers (305mm width) complete all as specified and directed by Engineer-in-Charge.Drg : FD-106 & FD-69 as applicable

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of table office (officer) steel complete all as specified and directed by Engineer-in-Charge. Drg : FD-84

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of table office (Clerk) steel complete all as specified and directed by Engineer-in-Charge.Drg : FD-84

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of desk complete all as specified and directed by Engineer-in-Charge. Drg : FD-107

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of table steel (900 x 600) with/with out drawer complete all as specified and directed by Engineer-in- Charge . Drg : FD-1007 & FD-1008

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of table steel (900 x 900x 760mm) complete all as specified and directed by Engineer-in- Charge Drg : FD-1009

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of trestle complete all as specified and directed by Engineer-in- Charge. Drg : FD-1043

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of almirah steel large MAP complete all as specified and directed by Engineer-in- Charge. Drg : FD/E6/MAP/18

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of rack shoe steel complete all as specified and directed by Engineer-in- Charge.Drg : FD/E6/MAP/02

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of rack steel (1830 x 760mmx1905mm ) complete all as specified and directed by Engineer-in- Charge . Drg : FD-129(M)

M&L for applying one coat of synthetic enamel paint (silver grey) with spray machine including preparation, rectification and denting etc. of steel surfaces of chair verandah MAP complete all as specified and directed by Engineer-in- Charge Drg : FD/E6/MA P/11

M&L for applying one coat of synthetic enamel paint (Olive black) with spray machine including preparation, rectification and denting etc. of steel surfaces of Bed hard MAP complete all as specified and directed by Engineer-in- Charge. Drg : FD/E6/MAP/8(R)

S & F in replacement seat of chair CB steel with arms, made out of Ist class Hard Wood Shisham duly canned with 2mm half round plastic cane except border which shall be 3mm flat and seat shall be fixed to the frame with nut and bolts 3” long, 4mm dia threaded as per existing duly melamine polished in black colour complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M)

S & F in replacement back of chair CB steel with arms, made out of Ist class Hard Wood Shisham duly canned with 2mm half round plastic cane except border which shall be 3mm flat and seat shall be fixed to the frame with nut and bolts 3” long, 4mm dia threaded as per existing duly melamine polished in black colour complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M)

S & F in replacement seat of chair CB steel with arms, made out of Ist class Hard Wood Shisham duly canned with 2mm half round plastic cane except border which shall be 3mm flat and seat shall be fixed to the frame with nut and bolts 3” long, 4mm dia threaded as per existing duly melamine polished in black colour complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M)

S & F in replacement back of chair CB steel with arms, made out of Ist class Hard Wood Shisham duly canned with 2mm half round plastic cane except border which shall be 3mm flat and seat shall be fixed to the frame with nut and bolts 3” long, 4mm dia threaded as per existing duly melamine polished in black colour complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M)

S & F in replacement mild steel flat iron size 25mm x 3mm as in stiffener and welded to frame of chair CB steel with/without arms including one coat of red oxide primer complete all as specified and directed by Engineer - in - Charge. Drg : FD-75(M)

S & F in replacement arms of chair CB steel made to shape as per existing pattern of Ist class Hard Wood Shisham duly black melamine polished and fixed to chair CB steel with arms with steel screws, 3mm dia complete all as specified and directed by Engineer - in – Charge. Drg : FD – 75 (M)

M & L for welding alround to broken MS steel frames of chair CB steel and other steel chairs and applying one coat of red oxide primer to the welding point complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M) &TP

M & L for applying one coat of synthetic enamel paint (silver grey) to steel frame of chair CB steel with arms including preparation of surfaces of steel frames complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M)

M & L for applying one coat of synthetic enamel paint (silver grey) to steel frame of chair CB steel without arms including preparation of surfaces of steel frames complete all as specified and directed by Engineer - in - Charge. Drg : FD – 75 (M)

S&F in replacement Seat cushion 50 mm thick 32 density covered with approved quality tapestry cloth of chair dinning long back complete all as specified and as directed by Engineer-in-Charge. Drg : FD-357

S&F in replacement Back cushion 30 mm thick 32 mm density covered with approved quality tapestry cloth of chair dinning complete all as specified and directed by Engineer - in – Charge. Drg : FD-357

S&F in replacement batten of size 70x10mm made out of Ist class hard wood sheesham duly melamine polished of chair dinning complete all as specified and directed by Engineer - in – Charge. Drg : FD-357

S&F in replacement Front leg made out of Ist class hard wood shisham duly melamine polished of chair dinning complete all as specified and directed by Engineer - in – Charge. Drg : FD-357

S&F in replacement back leg made out of Ist class hard wood shisham duly melamine polished of chair dinning complete all as specified and directed by Engineer - in – Charge. Drg : FD-357

S&F in replacement Stiffener made out of Ist class hard wood shisham duly melamine polished of chair dinning complete all as specified and directed by Engineer - in – Charge. Drg : FD-357

S&F in replacement melamine polishing one or more coat to surfaces exposed to view including preparation of surfaces of chair dinning complete all as specified and directed by Engineer - in – Charge. Drg : FD-357

S&F in replacement Seat cushion 75 mm thick 32 density covered with approved quality tapestry cloth of chair easy cushioned complete all as specified and as directed by Engineer-in-Charge. Drg : FD-358

S&F in replacement Back cushion 50 mm thick 32 density covered with approved quality tapestry cloth of chair easy complete all as specified and directed by Engineer - in – Charge. Drg : FD-358

S&F in replacement Bottom ply 8mm thick commercial face both side ISI marked of chair easy complete all as specified and directed by Engineer - in – Charge. Drg : FD-358

S&F in replacement arms cushion covered with approved quality leatherised rexine of chair easy complete all as specified and directed by Engineer - in – Charge. Drg : FD-358

S&F in replacement Seat cushion 75 mm thick 32 mm density covered with approved quality tapestry cloth of chair office steel with arms cushioned complete all as specified and as directed by Engineer-in-Charge. Drg : TP

S&F in replacement back cushion 50 mm thick 32 mm density covered with approved quality tapestry cloth of chair office steel with arms complete all as specified and directed by Engineer - in – Charge. Drg : TP

S&F in replacement Pedestal assembly as per existing design of chair office steel with arms complete all as specified and directed by Engineer - in – Charge. Drg : TP

S&F in replacement Caster wheel as per existing design of chair office steel with arms complete all as specified and directed by Engineer - in – Charge. Drg : TP

S&F in replacement Hydraulic system as per existing design of chair office steel with arms complete all as specified and directed by Engineer - in – Charge. Drg : TP

S&F in replacement Seat cushion 75mm thick, 32 density covered with approved quality tapestry cloth of chair computer complete all as specified and as directed by Engineer-in-Charge Drg : TP/FD/E6/MAP/01

S&F in replacement Back cushion 50mm thick 32 density covered with approved quality tapestry cloth of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01

S&F in replacement Pedestal assembly as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01

S&F in replacement Caster wheel as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01

S&F in replacement Hydraulic system as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg TP/FD/E6/MAP/01

S&F in replacement Arms/Handle as per existing design of chair computer complete all as specified and directed by Engineer - in – Charge. Drg : TP/FD/E6/MAP/01

S&F in replacement Head board made out of 18 mm thick prelaminated particle board along with PVC beading at top and sides of Bed hard MAP complete all as specified and as directed by Engineer-in-Charge. Drg : FD/E6/MAP/08 (R)

S&F in replacement Foot board made out of 18 mm thick prelaminated particle board along with PVC beading at top and sides of Bed hard MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/08 (R)

S&F in replacement PVC shoes of size 25mm x 25mm of best quality of bed hand MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/08 (R)

S&F in replacement Top of table bed side MAP made out of 18 mm thick prelaminated particle board along with 4mm thick TW beading alround complete all as specified and as directed by Engineer-in-Charge. Drg : FD/E6/MAP/15

S&F in replacement back Ply of table bed side MAP made out of 12mm thick plywood commercial face both side ISI marked complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15

S&F in replacement upper drawer as per drg of table bed side MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15

S&F in replacement Lower drawer as per drg of table bed side MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15

S&F in replacement Side made out of 18mm thick pre-laminated particle board as per drg of table bed side MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15

S&F in replacement mild steel Handle 100 mm long with 02 Nos screw as per existing design of table bed side MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/15

S&F in replacement of Top of teapay varandah MAP made out of 18 mm thick prelaminated particle board along with 4 mm thick teak wood beading alround complete all as specified and directed by Engineer-in-Charge. Drg : FD/E6/MAP/

S&F in replacement PVC shoe of teapay varandah MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/

S&F in replacement Shutter made out of 18 mm thick prelaminated particle board with piano type hinges as per existing to Bin multipurpose MAP complete all as specified and as directed by Engineer-in-Charge Drg : FD/E6/MAP/09

S&F in replacement mild steel Handle 100 mm long with 02 Nos screw as per existing design to Bin multipurpose MAP complete all as specified and directed by Engineer - in – Charge. Drg : D/E6/MAP/09

S&F in replacement Magnate catcher as per existing design to Bin multipurpose MAP complete all as specified and directed by Engineer - in – Charge. Drg : FD/E6/MAP/09

S&F in replacement drawer as per existing and as shown on drg to Bin multipurpose MAP complete all as specified and directed by Engineer - in – Charge.Note :- Tapestry Cloth should not be less than the rate of Rs. 200/-per RM. Drg : FD/E6/MAP/09

S&F in replacement seat of chair dining JCO/Ors made out of PVC sheet, 4mm thick and weight not less than 0.50 Kg of each seat all as specified and directed by Engineer- in- charge. Make : Ashoka/Amko Drg No. FD/MAP-II/05

S&F in replacement seat & back of chair verandah JCO/Ors made out of PVC sheet, 4mm thick and weight not less than 1.850 Kg of each seat and back grooves 90 x 10 mm, 10 Nos. on seat & back all as specified and directed by Engineer- in- charge. Make : Ashoka/Amko Drg No. FD/MAP-II/05

M&L for applying one coat of synthetic enamel paint (White) with spray machine including preparation, rectification and denting etc. of steel surfaces of Chair Verandah JCO/OR complete all as specified and directed by Engineer-in-Charge.Drg : FD-67(M) and as applicable

Note : Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

vardhman traders

JAIN TRADERS