SPL REPAIR TO OR OTM ACCN BLDG NO P-124 OF 50 (I) PARA BDE SIG COY UNDER GE (WEST) AGRA

Removing existing water proofing treatment of any description from roof upto mother slab, cleaning the surface using wire brushes etc, roughening the concrete surfaces picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.00 kg of cement per Sqm (Where PCC padding is to be provided) complete all as specified.

M & L for preparation of old roof surfaces by brooming and watering, cleaning all dust particles and providing PCC (1:2:4) type B-0, (using 12.50mm graded crushed stone aggregate) with and including water proofing compound as per manufacturer instruction as in paddding/ levelling course of average @ 3% by weight of cement or thickness not exceeding 25mm complete all as specified and as directed.

M & L for water proofing treatment of RCC Slab as per following stages: (A) Surface preparation : 1. Curing of the surface will be done properly to avoid any cracks over the surface. 2. One coat of SBR Will be done over all the corners of the surface. 3. Angle fillet will be made all over the corners. 4. Repairing of all the drainage pipe & khura. 5. Applying One coat of SBR Mixed in Ratio of 1:1 with Cement as Base coat. (B) Priming the surface : Applying one coat of primer of Fosroc roof Guard with 50% water dilution all over the surface up to 12 inches over the parapet walls to gain better adhesion. (C) Liquid Membrane application : Supplying and applying Fosroc Roof Guard Premium acrylic + PU based exposed waterproofing reducing up to 10-degree Celsius temperature over the surface applying two crisscross coats of the product with brush with laying of glass fibre mesh all over the surface for better elasticity. Complete all as per manufacturer's instructions and approved applicator complete all as specified and directed. Note:- 1. The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work.

M&L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over interior surface of wall including M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of primer and two or more coat wall care putty to achieve smooth and even surfaces including taking down cement or cement lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr -In-Charge.

M&L for 10 to 12 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) over exterior surface of wall M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint over and including a coat of primer and two or more coat weather proof wall care putty to achieve smooth and even surfaces including taking down cement or cement lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engr -In-Charge.

M&L for 5 mm thick ready mix repair plaster with high quality polymer additive and well graded sand and fillers which can be used for plastering ( as per manufacturer instruction ) ceiling surface including taking down old plastred surface and preparation of newly plastered surfaces of ceiling and applying three coat of white wash including taking down cement or cement lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water and complete all as specified and directed.

Providing & applying Rising damp-proof coating system with Single component ready to use damp-proof coating Roff Hydamp : 1.SURFACE PREPARATION: Thoroughly brush and clean all laitance, loose particles such as dirt, grease, mortar droppings, release agents, efflorescence, bird droppings, etc. All large voids or hollow portions must be removed and re-plastered. Non- moving cracks having width upto 5 mm must be filled with Polymer based crack filler. 2 APPLICATION: Apply the first coat of Dr Fixit Dampguard Classic with a paintbrush directly on the prepared surfaces by mixing ( 1 part base:1 part hardner: 1 part of water) . Allow to dry for a minimum 2-3 hrs. Apply one part of DAMPGUARD mixed chemical and 2 parts of OPC white cement/Birla Putty and make the Putty, apply Putty on the entire surface area. Allow it to dry for at least 3-4 hours. Apply the Final coat of Dr Fixit Dampguard Classic on the entire surface and allow the surface to air cure 48 Hrs proceeds to paint.

M & L for complete removal old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper including over a one or more coat of wall care putty to achieve smooth and even surface complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean and applying external wall care putty in two layer 1mm thick and making surface even and smooth to receive external emulsion and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed by Engr-in-Charge.

Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.by Engr-in-Charge