Providing New Lift and well arrangements for the existing Police Station Building at Race Course in Coimbatore City.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

30 : Ellispattern

37.1 : White washing 3 coat (slaked)

39 : S & F of M.s Grills

ANNEXURE-I 3.1.1 : P.C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Stilt / Ground Floor

c) In First Floor.

d) In Second Floor.

e) In Third Floor.

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

d. In Third Floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d. For Vertical wall

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

38.7.1 : Plastic Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

90.2: Providing additional strutting to centering of plain surface For every 3m Height

237 : Providing two legged scaffolding using 15cm diameter casurina props. 3m height

ANNEXURE - II A1: Dismantling the damaged brick works of brick works of cement mortar in all floors without affecting the adjacent structures including the cost of required tools and plants and scaffolding, if necessary and clearing the debris 2 km away from the site etc., all complete and as directed by the departmental officers for the following heights. a) wall above 3M to 6m depth

A2 : b) wall above 6M to 9m depth

A3: c) wall above 9M to 12m depth

A4: Supply and Laying of Granite wall cladding (Satharlic Grey, Paradise and similar varieties) ) of 10mm thick in C.M 1:2 (using crushed stone sand) Including Cost of Materials, Labour charges etc

A5: Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core 1.1 K.V. grade cable with continuous earth by means of 1.5 sqmm PVC insulated unsheathed single core 1.1 KV grade cable in confirming to IS 694/1980 (Open wiring) a. Light point with ceiling rose

A6 : Wiring with 1.5 sqmm Copper PVC insulated unsheathed single core, 1.1 K.V. grade cable with continuous earth by means of 1.5 sqmm PVC insulated unsheathed single core 1.1 KV grade cable in confirming to IS 694/1980 for 5 amps 5 pin plug socket point @ Convenient Places. (Open wiring)

A7: Supply and laying of following size of PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good a) 3.5 x 25 sq.mm PVC armoured LTUG cable

A8: b) 3.5 x 70 sq.mm PVC armoured LTUG cable

A9: Supply and fixing of brass cable gland for following PVC/ XLPE armoured LTUG cable with earth connection a) Brass cable gland for 3.5 x 25 sq.mm.

A10: b) Brass cable gland for 3.5 x 70 sq.mm.

A11: Supply and fixing of Copper flat for mv panel earthing with all consumsons a) Copper flat for 25 x 6 mm.

A12: Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door type (metal) with IP54 protection with 1 No. 32A DP MCB as incoming and Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mak (like standard make)

A13 : Providing of copper plate 600 X 600 x 3mm earthing with 2.85 mtrs long 40mm dia GI pipie earth for UPS, Server panel etc., including charcoal. Soil and mansonary civil construction chambers with cover etc.,

A14: Supplying and fixing of LED blubs suitable for fixing it to pendent / bakelite battern holder of best approved variety b) 12 watts LED bulb for bulk head fittings

A15: Supply and fixing of water tight LED Bulk head fitting for 12W LED Bulb

A16: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free.

A17: Supplying and laying of labour charges for fixing and jointing G.I pipes and specials of 80mm dia below ground level including cutting and threading the pipes wherever necessary and jointing with white lead, earth work exeavation for laying the pipes, wrapping the pipes with tarred tape and refilling the trenches after the pipes are laid uder ground etc.,

A18: Supplying and fixing of labour charges for cutting threading and jointing G.I pipes and specials of 80mm dia above ground level including fixing to wall necessary T.W plugs clamps and screws making holes in the wall or drilling holes in roof making materials packing the same with necessary scaffolding etc.,

A19: Supplying and fixing of labour charges for cutting threading and jointing G.I pipes and specials of 40mm dia above ground level including fixing to wall with necessary T.W plugs clamps and screws making holes in the wall or drilling holes in roof making materials packing the same with necessary scaffolding etc.,

Lift: A20: Design, Supply, Delivery, Installation, Testing, and Commissioning of Passenger Lift (Brand: Johnson / Kone / OTIS or equivalent) of capacity 8 Persons / STAINLESS STEEL (1.5 mm) Car Cabin as per the following specifications Three phase EB power supply should be get from the TNEB for installation and testing etc for completion of work.