Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹3.1 L
Closing Date
27 Jul 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
GEN
15 conditions · 4 needing a document upload
Financial Eligibility Criteria: In case tender value Rs. 50 lakhs or more, The tenderer must have minimum average annual contractual turnover of V/N or 'V" whichever is less; where V= Advertised value of the tender in crores of Rupees= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VI B, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet tenderer first read the Para 10 of GCC carefully and Advance Correction GCC2022.
1.For participating in tenders for an electrical nature of work, the contractor shall have to possess valid electrical license of appropriate voltage issued by any State Government under Clause 45 of Compilation of Rule of Indian Electricity Rules 1956 or as amended from time to time. Electrical works of 11 KV and above including OHE, 'A' class Electrical Contractor license is essential. 2.The license can be possessed with one of the partners or in his own name, if sole proprietor. Firm should submit a self-attested copy of the Electrical Contractor License along with the offer; otherwise the offer will be summarily rejected.
Eligibility Criteria means any contract which have satisfactorily executed & completed by the tenderer, which are mentioned as below as similar nature of works. As regards the similar works, the tenderer should have satisfactorily executed Work of 1.Electrification of Service building. 2.Electrification of Staff quarters. 3.Electrification of offices. 4.Electrification of road and colony lighting 5.Electrification of circulating area lighting 6.Erection and commissioning of LT, HT up to 33 KV overhead lines. 7.Substation installation and commissioning. 8.Electrification of washing pit, sheds & workshops etc. 9.Comprehensive/semi comprehensive maintenance of service building or staff quarters or sub stations or DG set or lifts. 10.Annual electrical maintenance contract of train lighting and/or air conditioning coaches excluding RMPU units of AC coaches. 11.Any above work or combination of (1) to (10) above. Tenderers should submit documentary proof in regards to fulfilling these eligibility criteria along with their offer. In case of any ambiguity, the decision of Chief Electrical Engineer in regards to classification of work will be final.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or(iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.(b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or(ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or(iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components.(b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. IN case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Tenderer first read the Para 10 of GCC carefully and Advance Correction GCC2022.
19 conditions · 1 needing a document upload
Tenderers are requested to submit their offers as per GST Tax regime. All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per latest GST Law. Contractor has to submit GSTN registration and PAN card.
Conditions regarding inclusion of "Letter of credit" as mode of payment attached as Annexure LC". As per Railway Board Letter No. 2018/CE-I/CT/9 dt. 04.06.2018, special condition of LC has been applied. The contractor shall have the option to take payment from Railway through a letter of credit (LC) arrangement, for all the tender having advertise cost of Rs. 10 Lakh or above.
The above option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter during execution of contract.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Latest GCC has been introduced and published / available on railway's website. The provisions of GCC will be applicable on all tenders published here after. Tenderers are requested to download the same from the railways website and ensure the implementation of the latest provisions made in GCC, while execution of work.
Contractor is to abide by the provisions of Payment of Wages act & Minimum Wages act in terms of clause 54 and 55 of Indian Railways General Condition of Contract ( copy uploaded and attached with this tender). In order to ensure the same, an application has been developed and hosted on website 'www.shramikkalyan.indianrailways.gov.in'. Contractor shall register his firm/company etc. And upload requisite details of labour and their payment in this portal. These details shall be available in public domain. The Registration/ updation of Portal shall be done as par clause 55 C (i) of Indian Railways General Condition of Contract.
While processing payment of any 'On Account Bill' or 'Final Bill' or release of 'Advances' or 'Performance Guarantee / Security deposit', contractor shall submit a certificate to the Engineer or Engineer's representatives that "I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal at 'www.shramikkalyan.indianrailways.gov.in' till ____ Month, _____Year."
A-Bhopal Division - Raising of existing platforms to High level at MSO (3), ODG (1) & PRKD (2) stations in BPL-ET section. B-Bhopal Division - Raising of existing platforms to High level at PAI (2), BET (2), KAH (2) MABA (3) & KIKA (2) in BPL-BINA section. C-Bhopal Division - Raising of existing platforms to High level at SUW (2), DWG (2), SMT (2), SUMR (2) & GLG (1) stations in BPL-BINA section
ELECT-GEN-BPL-T-21-2026
ELECT-GEN-BPL-T-21-2026
Open
Works - General
6 Months
Bhopal, Madhya Pradesh
₹0
₹3.1 L
27 Jul 2026
3 Jul 2026
13 Jul 2026
111 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 36,91,208.9 | ||
| — | Breakup | for details. | — | ||
| Supply of material and digging of trench in concrete area 30cms deep and 30cms wide and laying of pipe or cable. The Contractor has to replaster the surface/floor with cement concrete etc. (All the material will be supplied by the contractor) as per specification attached. | — | — | — | 1,45,751 | |
| — | Breakup | for details. | — | ||
| Supply, laying & fixing of HDPE pipe of 125mm dia PN-6(Nominal Pressure), PE-100 (Poly Ethylene grade ) along with all required material for joining the pipes, as per specification attached. Make-DOLPHIN, SHREEDARSHAN, TEXMO, KASTA or equivalent. | — | — | — | 4,61,541 | |
| — | 1150.00 | — | — | ||
| Laying of cable inside the GI/HDPE/DWC pipe as per specification attached. | — | — | — | 53,981 | |
| — | Breakup | for details. | — | ||
| Laying, erection, connection and testing of PVC Aluminium armoured cable in the following manner and as per specification attached. (Note: Cable will be supplied by Railway at concerned depot.) | — | — | — | 3,11,389.1 | |
| — | Breakup | for details. | — | ||
| Supply and fixing of perforated cable trays of GI sheet of 150mm width & 50mm height along with suitable cover. The work includes the supply of perforated cable tray of GI having dimensions 150X1.6X50mm along with GI sheet cover to fix on the cable tray of reputed make. The thickness of the cable tray should be of 1.6mm and 1.2mm for cable tray cover. The cable tray should be fixed upon the wall/pillar/gantries etc and similar other places with proper clamps, fixtures etc. asper the direction of Railway site Engineer. The cable tray cover should be fixed with proper clamps, fixtures, nuts & bolts etc as per site requirement. | — | — | — | 48,823.2 | |
| — | Breakup | for details. | — | ||
| Supply of material and erection of Octagonal galvanized steel pole of 5 mtr height on cement concrete foundation complete with foundation bolts, Single arm etc. din channel, 4-pole connectors of 25sqmm cable and 1x6A SPN MCB complete with GI wire coil earthing as per specification attached. Make- BAJAJ, PHILIPS, CROMPTON, UTKARSH or equivalent. | — | — | — | 7,02,053.76 | |
| — | Breakup | for details. | — | ||
| Supply, erection, connecting, testing and commissioning of Octagonal galvanized steel pole of 5 mtr height on cement concrete foundation with foundation bolt complete with double arm, din channel, 4-pole connectors of 25sqmm cable and 1x6A SPN MCB complete with GI wire coil earthing as per specification attached. Make- BAJAJ, PHILIPS, CROMPTON, UTKARSH or equivalent. | — | — | — | 4,58,400 | |
| — | Breakup | for details. | — | ||
| Supply installation, fixing, wiring, connecting, testing, and commissioning of 45 watt outdoor type LED Street light fitting of IP66, Pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management rating complete with wiring suitable MS clamps, nut-bolts, anchor fasteners, bend pipe etc. as per site requirements and specification attached. Make-PHILIPS, WIPRO, OSRAM, JAQUAR, HAVELLS or equivalent. | — | — | — | 6,15,201.6 | |
| — | Breakup | for details. | — | ||
| Supply, installation, connecting, testing and commissioning of GI Pipe earthing arrangement complete as per technical specification attached. | — | — | — | 4,05,910.4 | |
| — | Breakup | for details. | — | ||
| Supply, installation, connecting, testing and commissioning of 8 SWG GI wire | — | — | — | 21,686.7 | |
| — | Breakup | for details. | — | ||
| Supply & erection of B class 50mm GI pipe for cable support as per Railway's scope of work as per railway specification attached. Make- TATA, JINDAL, SWASTIK, or equivalent. | — | — | — | 19,379.52 | |
| — | Breakup | for details. | — | ||
| Supply, installation, connecting, testing and commissioning of outdoor type LT panel with 1X100A FP MCCB 25KA as incomer, 4X63A TP MCCB, 3x40A TP MCB & 4X16A SP MCB along with CT operated Energy Meter, meters for voltage, current, frequency, PF, 3 phase indicating lamps LED cluster type for phase indication, copper bus-bars, insulation sheet, neutral link connectors, copper bus-bars etc. enclosed 14 SWG in MS sheet enclosure. It also includes the proper fixing of the panel on MS Channel with suitable fixtures, clamps, nut & bolts, etc. as per technical specification attached. Make: For MCB's - L&K, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. For meters - SIEMENS, RESHAB, HAGER, SELEC or equivalent. | — | — | — | 1,28,129.08 | |
| — | Breakup | for details. | — | ||
| Supply, fixing, connecting, testing and commissioning of digital timer switch 16A capacity, complete with associated accessories & enclosure. Make- L&T, SIEMENS, LEGRAND, HAVELLES or equivalent. | — | — | — | 30,471.24 | |
| — | Breakup | for details. | — | ||
| Supply, installation, testing and commissioning of 3 pole power contactor ML-2 type of 32 A capacity. Make - L&T, SIEMENS, LEGRAND, HAVELLS or equivalent. | — | — | — | 45,213 | |
| — | 6.00 | — | — | ||
| Supply, fixing, connection, testing & commissioning of 25 Amp DP RCCB 30 mA breaking capacity, as per Railway's specifications attached. Make: L&T, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 6,608.46 | |
| — | Breakup | for details. | — | ||
| Dismantling of Overhead line/pole. This work involves identified poles to be dismantled by cutting and stacking of these poles as directed by Rly. Site Engineer. All the dismantled/released material shall be handed over to concerned Rly Engineer at their respective depot, the loading, transportation and unloading shall also be done by the contractor. It includes the dismantling of ACSR conductor/GI wire of LT/HT over head power line erected on the poles. The conductors/GI wires, cross arm etc. should be brought down and its manual winding and stacking of cross arm should be done. It also includes the dismantling of all terminations, jumpering etc., wherever required. The dismantled conductor should be loaded, transported & handed over to the concerned Railway SSE depot with proper accountal of the released material. | — | — | — | 1,01,205.26 | |
| — | Breakup | for details. | — | ||
| Supply, fixing, testing and commissioning of 12 ways double door single phase SDB comprising 1x32A TPN C series MCB as incoming and 8x16A SP C series MCBs as outgoing, as per specification attached. Make: L&K, SIEMENS, HAGER, LEGRAND, SCHNEIDER or equivalent. | — | — | — | 25,990.38 | |
| — | Breakup | for details. | — | ||
| Supply, erection, connection, testing and commissioning FRP/SMC junction box of Width (in mm) 200, Height (in mm) 300, Depth (in mm) 125, kits with fixing bolts, as per site requirement. Make: L&K, HAVELLES, HAGER, HENSEL, SINTEX or equivalent. | — | — | — | 1,09,474.2 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TechnicalSpecification.pdf
ATTACHMENT
GCC 2022
ATTACHMENT
GCCAmendments1to10.pdf
ATTACHMENT
GCCamendmentcorrectionslip11.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
AnnexureLC.pdf
ATTACHMENT
WCRLEDSpecificationsforLEDlights.pdf WCR LED Specification
ATTACHMENT
RB200824GOI190724.pdf
ATTACHMENT
SpecialConditions.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27_04_22.pdf
ATTACHMENT
WCRLEDSpecificationsforLEDlights.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .