Construction of ROB in lieu of level crossing No.22 at K.M. 43.405 of Rohtak Rewari Railway Line on crossing of Jhajjar Kosli Road (SH-22) at Jhajjar. (Pdg. street light only)

Amount

(I) Wires and Cables 31.9 Supply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. 31.9 (i) e Size 2.50 sqmm ( 80 / 0.20mm).

(c) Moulded case Circuit breakers. 31.12 (c) Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 31.12 c (ii) 15 amp.to 60 amp. 415 V ,10 KA 3-phase.

31.12 c (ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

(L) Miniature Circuit Breaker and Isolator. 31.17 Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (a) Miniature circuit breakers of 9 KA breaking capacity. 31.17 a (ii) SP MCB 6 Amp. to 32 Amp.

31.17(a) (ii) TP MCB 6 amp. to 32 amp.

31.22 (Q) Earthing 31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

31.22(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .

31.22(xvi) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required .

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections 31.26 (xxxix) Ard. 10 Sq. mm 4 Core Cable .

31.26 (xIi) Ard. 25 Sq. mm 4 Core Cable .

31.26 (xIiii) Ard. 50 Sq. mm 4 Core Cable .

31.28 Supply and erection of suitable compression type brass cable glands for underground Cable. 31.28 (ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core

31.28 (iii) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.

Pedestal . 31.33 Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 31.33 (ii) M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level .

31.67 Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including diging and refilling of earth including cost of sutiable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. (i) HDPE pipe 63/50 mm outer dia/inner dia.

31.68 Supply and Erection of Hot Dip Galvanized octagonal pole of 3mm thickness with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with natural links including connectin etc. with suitable connection arrangement for 2 No. MCBs/ Kit Kat including cost of R.C.C 1:1 5:3 for longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole eith all labour & material required to complete the jobin all respect upto the entire satisfaction of Engineer-in-Charge of the work. (ii) 9 Mtr. Long pole with top dia 70mm and bottom dia 155 mm with base plate of size 260x260x16mm

M.R. items N.S- 1 Supply / Installation of street light fitting of Havells make ENDURA PEARL PLUSSL 90W LED or equivalent make of Philips BRB 410 LED 90 W / Crompton LSTP 90 CDL / Bajaj BRTGF 90W LED1 make with cast aluminium body & toughened glass including the cost of all accessories as supplied by the manufacturer including the cost of all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work.

N.S - 2 Supply & Erection of LED flood light fitting of Havels make JETA IRI SFL 100W LED or its equivalent make of LSFN-100 CDL Crompton make / BJFL 100W Bajaj make / BVP 122 LED 110 W Philips make with pressure die cast alluminium housing, reflector and enclosed with toughened glass with all accessories as supplied by the manufacturer complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

N.S - 3 Supply & erection of outdoor duly factory manufactured feeder panel to operate S/L system made out of C.R.C.A. sheet 2 mm thick of App. Size ( 1100 L x 1400 H x 300 D ) mm with hot type canopy ventilation slots ( box type ) angle iron / channel iron frame of 40 mm x 40 mm x 6 mm on both sides. The panel should have double door godrej Almirah type weather proof with locking arrangement. The panel as such be made in two compartments one for space of energy meter with glass & solid wire mesh and sealing arrangements. The second compartment to accommodate the complete control system. Both the compartment is to accommodate system of set of timer, Copper Bus bar of size 400 mm x 20 mm x 3 mm duly tinned & insulated. The panel duly painted in powder coated gray shade. The main pannel door fixed with rubber gasket of superior quality to make it water proof. The panel should be fixed on C.C. Block size 1300 mm x 500 mm x 250 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster having a C.C. base of size 1500 mm x 750 mm x 250 mm below ground level.

N.S - 4 Supply and erection of 32/63 Amp. 3 Phase automatic time switch of L&T make alongwith contactor of required capacity of L&T make movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.

N.S - 5 Supply and erection of 40 Amp. 3 Phase AC Energy Meter in built C. T. 40/5 ( Approved by H.V.P.N on existing pole with clamps of required size including making necessary connections with petty material required to Complete the Job in all respect upto entire satisfaction of Engineer -in-Charge of the work.

N.S - 6 Supply and Erection of Single / Double Arm Bracket made of 50 mm Dia G.I Pipe 'B' Class 1.25 Mtr. Long with G.I Coller 0.50 Mtr. Long of Suitable Size to fit on Octogonal Pole with top Dia 70 mm including necessary Nut & Bolts etc. required for fixing of bracket on top of 9 Mtr. Long Octogonal Pole dully painted with Blue/ Red / Golden alluminium paint as per lumuniare with all labour and material required to complete the job in all respect upto the Entire Satisfaction of the Engineer-in-Charge of the work. (i) Single arm bracket

N.S - 7 Supply & erection of double door (Havels / standard make) sheet steel enclosure distribution board (Suitable for MCCB as incomer and MCB for out going circuit but with out cost of MCCB / MCB etc. The distribution board duly recessed in wall / surface mounting necessary connections with all labour & material required to complete the job in all respect up to entire satisfaction of Engineer-in-charge of the work.

N.S - 8 Supply & Erection of Crompton make MBW 7.5 H.P. pump with starter as supplied by the manufacturer with all labour & material required to complete the job in all respect up to entire satisfaction of Engineer-in-charge of the work.

ASHU TRADING COMPANY