Proposed Construction of Children Traffic Park, Dhurwa, Ranchi

Amount

Earthwork in excavation Trenches in hard soil (vide classification of soil item -B) all complete as per approved design, building specification and direction of E/I

Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B)

Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and

Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and

Providing coarse clean SAND FILLING in foundation trenches or plinth including ramming & watering in layers not exceeding

Eathwork in stripping in all kinds of soil including moorum soil ,soil mixed with kankar ,pebbles and boulders upto 300mm size and disposal of the same along with all organic materials (beyond 50Maway from the toe of the dam base in the country side )within initial lead of 150M .and all lifts as per specification and direction of E/I

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Supplying and laying (properly as per design and drawing) rip-rap with good quality of boulders duly packed including the cost of

Providing designation 75B one BRICK FLAT SOILING joint filled with local sand including cost of watering taxes royalty all complete as per

Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royallty all complete as per building specification and direction of E.I

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2.4(1 Cement: 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) P.C.C in FOUNDATION

P.C.C- Providing and lying in position cement concrete of specified grade excluding the cost of centering and shutturing - All work up to Plinth Level 1:3:6 ( 1 Cement : 3 coarse sand ( zone-III) : 6 graded stone aggregate 20 mm nominal size )

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : PCC 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing P.C.C. M-200 with nominal mix of (1:1.5:3) in foundation with approved quality of stone metal grade - III (50 mm to 25mm size) clean coarse sand of F.M 2.5 to 3 including screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, skirting, curing, taxes and royalty all complete all complete as per building specification and direction of Engineer-incharge.

Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing .1: 11/2 :3 (Cement : 1 1/2 Coarse sand ( zone -III ) : 3 graded stone aggregate 20 mm nominal ( size )

Providing designation 75B brick work in C.M (1:10) in foundation and plinth – do -

Providing single layer naria tiles in roof including cost of all labour and materials taxes all complete as per building specification and direction of E.I

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Providing and laying 6 mm precast SEMI GLAZED CERAMIC TILES of approved quality in DADO over 12mm cement mortar (1:3) and jointed with white cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I with Commercial grade white 15cmx15cm tiles.

Providing and laying 6 mm . precast white Glazed Tiles in walls over 12 mm . cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes , and royalty all complete as per building specification and direction and of E/I .

Providing and laying 25mm thick white makarana marble stone slab flooring of approved texture and (2) 300 x 600 mm

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing GRANITE stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Providing and laying 25 mm thick kotah stone tiles in risers of step skirting and pillars of approved sizes texture and colour lead over 12 mm thick cement mortar and joined with grey cement slurry mixed with pigment to match the shade of slab including rubing and polishing to granolithic finish with approved quality -- do --

proved and laying VETRIFIED Paring / INDUSTRIAL Tiles in wall over 20 mm .cement morter (1:4)and jointend with grey cement slurry flush pointed with white cement including rubbing ,polisingand cost of curing taxes ,and royalty all complete as per building specification and direction of

Providing and laying Double chaege Vetrified floor tiles in risers of step skirting and pillars of approved sizes texture and colour lead over 12 mm thick cement mortar and joined with grey cement slurry mixed with pigment to match the shade of slab including rubing and polishing to granolithic finish with approved quality -- do --

RED COLOUR-Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Wall lining butch work upto 10m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width, including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75x75 mm and by providing layer of 75 mm thick strips i/c 12 mm thick bed of cement mortar 1:3 (1 Cement : 3 coarse sand) i/c ruled pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in-charge

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) R.C.C in foundation

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Providing designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:6) in superstructure with approved quality of clean sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 112 mm thick reinforced designation 100 a brick work with fly ash lime brick (FLAG)Confirming IS 12894-1990 (9"X4.5X3")in C.M (1:4)insuperstructure with approve quality of clean coarse sand of F.M 2 to 2.5 including the cost of screening carriage of , materials scaffolding , raking out joints to 15mm depth , curing , taxes and royalty(but excluding the cost of reinforcement ) all complete as per building specification and direction of E/I

Providing R.C.C. M-200 with nominal mix of (1:1.5:3) in PLINTH BEAM with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations plinth beametc. for mass concrete

Colm-Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Providing R.C.C. M-200 with nominal mix (1:1½:3) IN Colunm with approved quality of stone chips 20 mm to 6 mm size grade

Centering and shuttering including strutting, propping etc. and removal of form for RCC WALL, bases of columns, etc. for mass concrete

Reinforced cement concrete work in ROOF BEAM, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Reinforced cement concrete work in LINTEL BEAM, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers, LINTEL BEAM

Providing R.C.C. M-200 with nominal mix of (1:1½:3) in ROOF SLAB of all types with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position vibrating, skirting, curing, (but excluding the cost of reinforcement, taxes and royalty all complete job as per building specification and direction of E/I.

Centering and shuttering including strutting, propping etc. and removal of form for ROOF SLAB and cantilevers

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

CHAJJA- Reinforcement cement concrete work in beams, suspended floor , roofs having slope up to 15 degree landings, balcnies,shelves, chajjas,Lintels, bands , plain window sills , staircases and spiral stairs cases above plinth level up to floor five level , excluding cost of centering,shuttering finishing and reinforcement,with 1: 1.5 : 3 (1 Cement : 1.5 Coarse sand ( zone -III ) : 3 graded stone aggregate 20 mm nominal ( size )

( Chajja )Centering and shuttering including strutting, propping etc. and removal of form for - chajja, platform , patti , etc.

Reinforcement for RCC work including straightening, cutting, bending, placing in position and bonding all complete.

TMT-500 8mm dia

TMT-500 10mm dia

TMT-500 12mm dia

TMT-500 16mm dia

TMT-500 20mm dia

Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.)

Supplying fitting and fixing M.S grill gate with M.S grill made of 20 x 6 mm M.S flats or 16 mm M.S square bras fitted on 25x25x6 mm M.S angle frame -- do -- (where materials is not supplied by the deptt.)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use ofchequered plate wherever required, all complete

Providing 12mm cement mortar (1:3) with clean coarse sand of F.M. 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.

Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Dismantling pucca brick work or lime work including stacking serviceable materials in countable stacks with in 15 M lead and disposal of unserviceable materials with leads all complete as per direction of E.I.

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling R.C.C work including ROOF SLAB stacking serviceable materials in countable stacks with in 15 M lead and disposal of unserviceable materials with leads all complete as per direction of E.I.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured.

Covering of treated surface with PCC .- Providing 25 mm thick Cement Alf, Concrete M20 1:1. :3) maintaining slope in alternate 2 mt x 2 mt panels with aaprove. .,..• of stone chips of 20 mm to 6 mm size graded and cleaned sand 2.5 to 3 including screening,shuttering,and mixing cement concret . fixer with admixture of integral water proofing and placing in posi . ing curing,taxes and royality all complete as per building specifi nd direction of Ell. Panels that has been left shoul be casted next dysThere should be 6 mm gap between Panels .Brand Sika _Plastocrate Aus,MYK proof WP10, Fosroc- Conplast X421 lc& Dr Fixit Pidiproof LW+

Providing and filling of 6 mm thick Groove between 25 mm PCC Panels with Polysulphide Sealant (Poring Grade)as Per drawings and technical specifications and direction of E in Charge (with 18% GST Polysulphicle Fosroc-Thoflex 600.Dr Fixit Pidiseal PS(42P) !MraYndK -Seikaal PS or Euivalent

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing two coats of Plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I . ( INSIDE WALL)

Providing two coats of snowcem of approved shade and make over a coat of cement primer over new surface including prepairing the plastered surface by rubbing smooth with sand paper scaffolding curing,taxes all complete as per building specification and direction of E.I

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with textured exterior paint of required shadeNew work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Supplying, fitting & fixing M.S. GRILL made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.

Providing two coat of red lead paint of approved make over new steel surface including prepairing the surface after cleaning, removeing dirt, scales smoke , grees and cleaning the surface throughly including cost of scafolding and taxes all complete as per building specification and direction of E.I

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface

Providing two coats of painting with ready mixed paint of approved shade and make over steel surface ….

Supplying, fitting and fixing good quality in chaukhat in doors, windows

Providing and fixing pressed steel door frames confirmig to IS: 4351 manufactured form commercial mild steel sheet of 1.25 mm thickness including hinges jomb, lock jamb, bead and if required angle threshold of mild

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealant shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Supplying fitting and fixing 35mm thick solid core type decorative single leaf flush shutters In doors and window with black board core blended with high quality phenol format dehyde

Supplying fitting and fixing 35mm thick solid core type non-decorative single leaf flush shutters In doors and window with black board core blended with high quality phenol format dehyde

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm longbrackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.

30mm thick factory made soiled both side Prelaminated Panel PVC door shutter consisting of frame made out MS tube of 19 guage thickness as per your size .

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and Is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top.... Anodised aluminium

Providing and fixing glazaing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket ….. With float glass panes of 4.0mm thickness

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately)

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc.complete.

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Supplying and fixing C.I. cover without frame for manholes :500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 600x450mm-39.00kg

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Anodized (AC 15 ) aluminium tubular handle bar

Providing 250mm wide brick drain in cement mortar (1:6) with as. 150mm clear depth and 250mm apron including cost of earthwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20mm nominal size ) over 75mm bad by dry brick ballast 40mm nominal size well rammend and consolidated and grouted with fine sand including finishing the top smooth.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with sea; ring conforming to IS:5382, leaving 10mm gap for thermal expansion, Single socketed pipes

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler - 110mm

Bend - 110mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 110 mm

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern

Supllying and matarials with lobour for construction inspection chamber of designation class 75b brick deep 600x450 internal diamention having 250mm wall thickness in cement morter(1:6)including 12mm cement plaster (1:4)with punning on inside and cement plaster (1:6)with 600x450mm G.I. cover with frame (weight not less than 36k.g)in foundation and refilling all complete as per specification and direction of E/I.

Cost of Driling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.

STAGE WITH PIPE -L- shape pipe with polycarbonate sheet for stage area of amphitheater. As per drawing)

Eathwork in stripping in all kinds of soil including moorum soil ,soil mixed with kankar ,pebbles and boulders upto 300mm size and disposal of the same along with all organic materials (beyond 50Maway from the toe of the dam base in the country side )within initial lead of 150M .and all lifts as per specification and direction of E/I

Supplying laying fitting and fixing NP2 R.C.C spun pipes all complete as per direction of E/I. 200mm dia

Labour for alying, fitting and fixing NP2 R.C.C. spun pipe with colars in lines, level and grade and providing approved jointing materials and joints properly filled to make them leakproof including providing sight rails, bonning rod, night guard, Red light and barrier etc. all complet as per specification and direction of E/I.

Construction of granular sub base by providing coarse graded material @ 1.28 m3 / m3 , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause401. As per MOSRT&H specification401 (5th revision) and direction of E/I

Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)

Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of the road surface and spraying primer @0.60 kg/sqm using mechanical means . As per MOSRT&H specification 502 (5th revision ) & as per direction of E/I.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor @0.20 kg/sqm on the prepared bituminous surface cleaned with mechanical broom. As per MOSRT&H specification 502 (5th revision ) & as per direction of E/I.

Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects.

Bituminous Concrete Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

CARRIAGE COST

SAND (8KM) (7P+1K)

CHIPS (22 KM)

BRICK (8 KM)

Fly Ash brick (8 KM)

BOULDERS (22 KM)

MOORUM (1 KM)

METAL

ELECTRICAL

Point wiring in PVC conduit, with modular type switch:-Wiring for light point/fan point/exaust fan point / callbellpoint with 1.5sq.mm FRPVC insulated copper conductor single core cable in surface/recrssed PVC conduit,with modular type switch, modular plate, suitable size G.I. box etc.as required.

Group C

Twin Control Point wiring in PVC conduit, with modular type switch:-Wiring for Twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way modular type switch,modular plate, sutiable size G.I box etc as requried.

Power plug wiring in PVC conduit (2x4 sq.mm):-Power plug wiring in PVC conduit (2x4 sq.mm):- Wiring for light / power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surfface / recessed PVC conduit along with 1 Nos. 4 sq.mmFR PVC insulated copper conductor single core cable for loop earthing as requried.

Circuit /sub main wiring in PVC conduit :- Wiring for circuit / sub main wiring along with earth wire with the following size PVC insulated copper conductor ,single core cable in surface /recessed PVC conduit as requried.

2x1.5 sq.mm + 1x1.5 sq.mm earth wire

2x2.5 sq.mm + 1x2.5 sq.mm earth wire

2x4.0 sq.mm + 1x4.5 sq.mm earth wire

2x6.0 sq.mm + 1x6.0 sq.mm earth wire

2x10 sq.mm + 1x10 sq.mm earth wire

4x6 Sqmm + 2x6 sqmm earth wire (For essential TPN DB)

S/V PVC/ G.I. boxes :- Supplying and fixing PVC/G.I box of following sizes on surface or in recessed with sutiable size of phenolic laminated sheet cover infront including painting etc as requried.

75 mm x 75 mm x 50 mm deep / (4" x 4" )

72 mm x 146 mm x 48 mm deep / (4" x 7" )

210 mm x 206 mm x 48 mm deep / (10" x 12" )

S/F light plug point with piano type accessories : Supplying and fixing sutiable size G.I./PVC box on surface or in recessed with phenolic laminited sheet cover in front including providing and fixing 5 pin , 5/6 amps socket outlet and 5/6 amps piano type switch connection , painting etc, as requried.

9W, High efficient recess mounted COB LED downlighter with extruded aluminium housing. High efficiency 38 Deg beam reflector optics for effictive thernmal management using aluminium casting. CRI>80, CCT - 4000K,50,000 hrs @ L70 life. IP20, Ambient temp- 0 to 45 DegC, Driver efficiency>85%, THD<20%, Powerfactor>0.95, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Cutout Dia-ø90mm. Luminaire lumen ≥ 900 lm. (100 lm/W). Similar to Wipro Make LD98-131-038-40-XXor Equivalent Philips make.

32W, High efficient track mounted COB round LED downlighter with extruded aluminium housing. High efficiency 36 Deg Beam reflector optics for effictive thernmal management using aluminium casting. CRI>80, CCT - 5700K, 50,000 hrs @ L70 life. IP20, Ambient temp-0 to 45DegC, Driver efficiency>85%, THD<20%, Powerfactor>0.95, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 3070 lm. (95 lm/W). Similar to Wipro Make LD57-381-036-40-XX or Equivalent Philips make.

Maximum 12W, High efficient recess mounted LED round downlighter with white powder coated, pressure die cast aluminium housing. High transmittivity PS diffuser provides soft light. CRI>80, IP40, Ambient temp-0 to 45DegC, CCT - 4000K, 50,000 hrs @ L70 life. Driver efficiency>85%, THD<10%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 90-265V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 1320 lm with Minimum 110 lm/W system efficacy. Cutout Dia-ø110mm. Similar to Wipro Make LD06-151-XXX-40-XX or Equivalent Philips make.

Maximum 20W, High efficient recess mounted LED round downlighter with white powder coated, pressure die cast aluminium housing. High transmittivity PS diffuser provides soft light. CRI>80, IP20, Ambient temp-0 to 45DegC, CCT - 4000K, 50,000 hrs @ L70 life. Driver efficiency>85%, THD<10%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 90-265V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 2640 lm with Minimum 110 lm/W system efficacy. Cutout Dia-ø168mm. Similar to Wipro Make LD06-301-XXX-40-XX or Equivalent Philips make.

18W, High efficient surface mounted LED round downlighter with white powder coated, pressure die cast aluminium housing. High transmittivity PS diffuser provides soft light. CRI>80, IP20, Ambient temp-0 to 45DegC, CCT - 4000K, 50,000 hrs @ L70 life. Driver efficiency>85%, THD<10%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 90-265V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 1800 lm with Minimum 100 lm/W system efficacy. Cutout Dia-ø145mm. Similar to Wipro Make LD06-221XXX-40SMG1 or Equivalent Philips make.

12" (300mm) metal exaust fan

Bulk head fitting with 9/10 Watt CFL/LED

S/F lpower plug point with piano type accessories Supplying and fixing sutiable size G.I./PVC box on surface or in recessed with phenolic laminited sheet cover in front including providing and fixing 6 pin , 15/16 amps socket outlet and 15/16 amps piano type switch connection , painting etc, as requried.S/F lpower plug point with piano type accessories :-

S/F celling rose :- Supplying and fixing 2 pin 5 amp. Celling rose on the existing junction box/ wooen block including connection etc. as requried.

S/F Batten holder :- Supplying and fixing battrn / angle holder including connection etc as requried.

ITC fluorescent fitting directly on surface :- Intallation testing and commissioning of pre wired fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on celling / wall including connection with 1.5 sq. mm. FR PVC insulated copper conduit as requried.

ITC celling fan :- Installation, testing and commissioning of celling fan, including wiring the down rods of standerd leanth (upto 30 mm) with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as requried.

ITC Exhaust fan upto 450 mm. sweep:- Installation of exhaust fan upto 450 mm. sweep in the existing opening, including making the holeto suit the size of the above fan, making good the damage, connection, testing, commissioning etc as required.

S/F Modular type switch / socket :- Supplying and fixing following modular type switch /socket on the existing modular plate and switch box including connection but exculiding modular plate etc.as requried.

5/6 amps,one way switch

5/6 amps, 3 pin socket outlet

S/F 20 amps SPN MCB industrial socket outlet :-Suppling and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps "C" serise, SP MCCB, in sheet enclosure, on surface or in recessed with chained metal cover for the socket outlet and complete with connections, testing and commissiong etc. as requried.

S/F lpower plug point with modular type accessories Supplying and fixing sutiable size G.I./PVC box on surface or in recessed with phenolic laminited sheet cover in front including providing and fixing 6 pin , 15/16 amps socket outlet and 15/16 amps piano type switch connection , painting etc, as requried.S/F lpower plug point with modular type accessories :-

S/F power plug point with piano type accessories :- Supplying and fixing sutiable size G.I. box with modular plate cover in front on surface or in recessed including providing and fixing 6 pin , 15/16 amps modular socket outlet and 15/16 amps modular switch connection , painting etc, as requried.

S/F Modular type switch / socket :- Supplying and fixing following modular type switch /socket on the existing modular plate and switch box including connection but exculiding modular plate etc.as requried.

5/6 amps, one way switch

S/F rewireable double pole / TP&N switch disconnector:-Providing and fixing following capacity doble pole / TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as requried.

32 amps, double pole

Telephone wiring in existing conduit :- Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in existing surface/ recessed steel PVC conduit including dismantling as requried.

TV cable in existing conduit :- Supplying and drawing co-axial TV cable RG-6 grade copper conductor, PE insulated , with PVC sheath in the existing surface/ recessed PVC conduit as requried.

S/F Modular Boxes, base & cover plate:-Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required.

1 or 2 module (78 mm x 78 mm x 45 mm)

4/5 module (78 mm x 140 mm x 50 mm)

S/F 'C' serise, MCB:- Suppling and fixing ,240 volts "C"serise miniature circuit breaker suitable for inductive loads of follong poles in the existing MCB DB complete with connections, testing and commisioning etc. as required .

6/32 amps, Single pole

6/32 amps, SPN

40 amps, DP

S/F TPN RCCB:- Supplying and fixing following rating, TP&N ( three phase and neutral) 415Volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300mA in the existing MCB DB complete with connections, testing and commissioning etc, as required. 40 A/300mA

P/F M.V. danger notice plate:- Providing and fixing M.V danger notice plate of 200mm x 150mm, made of mild steel, at least 2mm thick and vitreous enamelled white on both sides and with inscription in single red colour on front side as requried.

S/F MCCB in cubical panel board:- Providing and fixing following rating and capacity four pole MCCB in existind cubical panel board, including drilling holes in cubicle panel, making connection, ect as required.

125 amps, 16 KA, fixed termal setting.

S/F S.P. MCB DB :Supplying and fixing following way single pole nutral , sheet, MCB dstribution board , 240 volts ,on surface/recess, complete with tinned copper busbar,nutralbusbar, earth bar,din bar, detachable gland plate,interconnection, phosphate and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)

8 way , single door

4way,Single door

6way,single door

S/F S.P. MCB DB : Supplying and fixing following way single pole nutral , sheet, MCB dstribution board , 240 volts ,on surface/recess, complete with tinned copper busbar,nutralbusbar, earth bar,din bar, detachable gland plate,interconnection, phosphate and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)

4way, Double door

16way,Double door

6/32amps, single Pole,"B" serise

S/F PVC Conduit:- Supplying and fixing of following sizes of PVC conduit alongwith the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required for Tele, RJ45 Cat 6 data outlet for computer network.

S/F Modular type Electronic Fan Regulator- Supplying and fixing following modular type lectronic Fan Regulator- on the existing modular plate and switch box including connection but exculiding modular plate etc.as requried.

Erectiomn on incandescent light fitting :- Erection of wall bracket / celling fitting of all sizes and shapes containing up to 2 GLS amps per fitting , complete with all accessories including connection etc as requried.

S/F Modular type blanking plate :- Supplying and fixing modular blanking plate on the existing modular plate and switch box exculiding modular plate etc.as requried.

S/F SP MCB blanking plate :- Suppling and fixing Single pole blanking plate inexisting MCB DB complete etc. as required .

S/F HRC fuse type TP&N switch disconnector:-Providing and fixing following capacity doble pole / TP&N sheet metal switch disconnector fuse unit in existing metal board, with ISI marked HRC fuses, including drilling holes in metal board, making connections, etc as requried.

400 amps, TP&N, HRC

S/F Panel montude change over:- Providing and fixing following capacity 4 pole panel mounted change over switches in existing cubcile panel board, making connection earthing the body etc as requried.

400 amps, 4 pole

S/F Busbar chamber :- Providing and fixing following capacity busbar chamber with 4 strips of sutiable size made of copper, heavy duty, complete with all accessories including connections, earthing the body, etc as requried.

S/F HRC fuse type TP&N switch disconnector:-Providing and fixing following capacity doble pole / TP&N sheet metal switch disconnector fuse unit in existing metal board, with ISI marked HRC fuses, including drilling holes in metal board, making connections, etc as requried.

200 amps, TP&N, HRC

S/F Busbar chamber :-Providing and fixing following capacity busbar chamber with 4 strips of sutiable size made of copper, heavy duty, complete with all accessories including connections, earthing the body, etc as requried.

S/F rewireable double pole / TP&N switch disconnector:-Providing and fixing following capacity doble pole / TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as requried.

63 amps, double pole

32 amps, TP&N

S/F S.P. MCB DB :- Supplying and fixing following way single pole nutral , sheet, MCB dstribution board , 240 volts ,on surface/recess, complete with tinned copper busbar,nutralbusbar, earth bar,din bar, detachable gland plate,interconnection, phosphatize and powder painted inculiding earthing etc.as required.(But without MCB/RCCB/Isolator)

4way (4+12), Single door,Horizontal type

Supplying and fixing of following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (Without MCB/RCCB/ISOLATOR). Make :- Legrand/Schneider/ Siemens.

S/F VERTICAL TYPE T.P. MCB DB:- Supplying and fixing following way prewired vertical type TP&N MCB distribution board steel for 415V on surface and recess complete with loose wire box of sheet steel,dust protected,duly powder,duly powder painted,inclusive of 200 amps tinned copper bus bar,common neutral link, earth bar, din bar for mounting MCB's,terminal connectors for all incoming and outgoing circuits,duly prewired with adequate size of FRLS PVC imsulated copper conductor upto terminal connector/neutral link,earthing etc as required (But Without MCB/RCCB/Isolator).(Note : Prewired vertical type MCB TPDB is normally used where 3 phase outlets as required.) 4 way (8 +12),Double door.Vertical type

S/F 'C' serise, MCB:-Suppling and fixing ,240 volts "C"serise miniature circuit breaker suitable for inductive loads of follong poles in the existing MCB DB complete with connections, testing and commisioning etc. as required .

50/63 amps TPN

S/F rewireable double pole / TP&N switch disconnector:-Providing and fixing following capacity doble pole / TP&N sheet metal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in metal board, making connections, etc as requried.

16 amps, double pole

S/F HRC fuse type TP&N switch disconnector:-Providing and fixing following capacity doble pole / TP&N sheet metal switch disconnector fuse unit in existing metal board, with ISI marked HRC fuses, including drilling holes in metal board, making connections, etc as requried.

100 amps, TP&N, HRC

Copper earth plate electrode:- Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonary enclours with cover plate having locking arrangrment and watering pipe etc .as requried .(But with out charcoal or coke and salt).

S/L 8 SWG copper wire in ground:- Suppling and laying 8SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldring as requried.

S/L 25mm x6mm G.I. earth strip in ground :- Supplying and laying 25mm x6mm G.I. strip at 0.50 metre below ground as strip earth eletrode, incoluding soldering etc .as requried.

P/F G.I lighting conductor finial :- Providing and fixing of lighting conductor finial, made of 25 mm dia 300mm long, G.I tube, having single prong at top, with 85 mm dia 3 mm thick G.I base plate including holes etc as rqquried.

Reverting sweating and soldring lighting conductor tape:-Reverting sweating and soldring of copper / G.I tape (with another copper/ G.I tape, base of the final or any another metalic object) as requried.

P/F G.I lighting conductor tape in horizontal run :- Providing and fixing G.I tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as requried.( for horizontal run ).

P/F G.I lighting conductor tape in vertical run :- Providing and fixing G.I tape 20 mm x 3 mm thick on parapet or surface of wall for lighting conductor complete as requried.( for horizontal run ).

P/F Testing joint for G.I lighting conductor :- Providing and fixing testing joint, 20 mm x 3 mm thick copper strip 125 mm long , with 4 nos. of G.I bolts, nuts, check nuts and spring washers etc. complete as requried.

P/F coppre earth tape for lighting conductor :-Providing and laying copper tape 32 mm x 6 mm from earth electrode directly in ground as requried.

XLPE indulated PVC sheathed,heavy duty,,armoured electrical cable with aluminiumconductor for working voltage upto and including 1100 volts. (confirms to IS:7098-PART-1) - 70 sq. mm, 3.5 core

XLPE indulated PVC sheathed,heavy duty,,armoured electrical cable with aluminiumconductor for working voltage upto and including 1100 volts. (confirms to IS:7098-PART-1) - 35 sq. mm, 3.5 core

MV cable laying up to 35 sq.mm in ground :-Laying of 1 number PVC insulated and PVC sheathed / XLPE power cable of 1.1 K V grade of size not exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as requried.

MV Cable Laying upto 95 Sq mm in ground:- Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc, as required.

Ceiling Fan 48" (1200mm)

20/22 watt LED tube light

Supply 15/16W LED BULB

EXTERNAL ELECTRICAL

Supply and erection of 7 meter height Hot-dip galvanized octagonal street pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base of size 220 x 220 x 12 mm ,small door opening for junction box mounting and suitable size foundation bolt with tamplate and all complete as required. Make:- Volmount/ bajaj/Transrail.

1.5 Meter Double arm suitable for 70mm top

S.I.T.C of flowing rating LED Street Light luminium presure die cast housing and toughended glass cover IP 66 PROTECTION luminium Polyster UV resistant powder coated black finish and Top maintainable product with top opening die cast cover with acrylic clear glass reflector.CRI>70, IP66, Ambient temp-0 to 45DegC, Driver efficiency>85%, CCT - 4000/5700K,THD<10%, Powerfactor>0.95, Surge protection-4 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-300V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 4275 lumens (95 lm/W). Similar to Wipro Make LP07 or Equivalent Philips make.

45W, High efficient LED Post Top Lamp with aluminium housing in Pure Polyster UV resistant powder coated black finish and Top maintainable product with top opening die cast cover with acrylic clear glass reflector.CRI>70, IP66, Ambient temp-0 to 45DegC, Driver efficiency>85%, CCT - 4000/5700K,THD<10%, Powerfactor>0.95, Surge protection-4 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-300V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 4275 lumens (95 lm/W). Similar to Wipro Make LP07 or Equivalent Philips make.

supplying ,fitting M..s tubular hollow tube/pipe S2062 grade ,hoisting steps ,welded with 6mmdia and 75mm long M.Srods anchorage fixed inconcrete steps at the time of costing including taxes all complete as per direction ofE/I

80mm dia tubular pipe=8.47kg/mtr(medium) =2mx162no=324 m

9W, High efficient LED Bollard with extruded Aluminium housing with PC diffuser.CRI>70, IP65, CCT - 6500K, Ambient temp-0 to 45DegC, Driver efficiency>80%,THD<25%, Powerfactor>0.9, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 209 lumens (29 lm/W). Similar to Wipro Make LB13 or Equivalent Philips make.

Circuit /sub main wiring in PVC conduit :- Wiring for circuit / sub main wiring along with earth wire with the following size PVC insulated copper conductor ,single core cable in surface /recessed PVC conduit as requried.

2x2.5 sq.mm + 1x2.5 sq.mm earth wire

S/F S.P. MCB DB : Supplying and fixing following way single pole nutral , sheet, MCB dstribution board , 240 volts ,on surface/recess, complete with tinned copper busbar,nutralbusbar, earth bar,din bar, detachable gland plate,interconnection, phosphate and powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)

4way, Double door

S/F 'C' serise, MCB:- Suppling and fixing ,240 volts "C"serise miniature circuit breaker suitable for inductive loads of follong poles in the existing MCB DB complete with connections, testing and commisioning etc. as required . 6/32 amps, DP

Providing , laying and fixing following dia UPVC pipe (medium Class) in ground complete with UPVC .Fittings including trenching (75 cm deep) and refilling etc. as required.

75 mm dia UPVC pipe

Heavy duty,armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts.

3.5c x 35 sq mm

4c x 16 sq mm

4c x 10 sq mm

2c x 6 sq mm

MV Cable Laying up to 25 sq. mm. in ground :- Laying of one number PVC insulated and PVC Sheathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm. direct in ground including excavation, sand cushioning, protective covering by 2nd class bricks and refilling the trench etc as required.

COPPER EARTH PLATE ELECTRODE:-

Earthing with copper plate 600mmx 600mmx 3mm thick including acessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.(but without charcoal or cock and salt) complete etc. as required.

P/F 25 x 5mm copper earth strip in pipe :-

Providing and fixing 25mmx5mm cpper earth strip in 40mm & 4.5Mtr long G.I.pipe for earth electrode etc. as required.

S/L 8 SWG copper wire in ground (for main panel and AC panel) :-

S/L 8 SWG G.I. wire in ground :- Supplying and laying 8 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required.

DG set 100 KVA With AMF

EXTERNAL LIGHTING PANEL

Supply, assembly, erection, connecting, testing & commissioning of LT weather proof dust and vermin proof, outdoor feeder pillar,IP-55, fabricated out of suitable sized angle iron and flats and covered with 3mm thick CRCA sheet steel including canopy, duly stove enamel painted, both sides (front and rear) openable with locking arrangement, rubber gasket cable glands, etc. Bakelite phase separators and bus bar supports including RCC 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation, 450 mm deep and 150 mm above the ground. The feeder pillars shall be complete with 3 phase and neutral bus bars of capacities as described below and moulded case circuit breakers (MCCBs) with adjustable overload relay, copper FRLS control wiring with 1.5sq.mm, complete in all respects as per specifications as required.

INCOMING:-

160A 4P MCCB (35kA) with thermal magnetic release & rotary handle - 2no.

3 Phase and neutral (100%N) aluminium bus bars of 200 amps. Capacity.

160A 4P Change Over (35kA) with thermal magnetic release & rotary handle - 1no.

OUTGOING:-

63 A 4P MCCB (25kA) with thermal magnetic release & rotary handle - 2no.

125 A 4P MCCB (25kA) with thermal magnetic release & rotary handle - 2no.

40A 4P MCB (10kA) - 4 nos.

63A 4P MCB (10kA) -6 nos.

63A DP MCB (10kA) - 5 nos.

16 AMP. MCB with 16A SWITCH & SOCKET - 2 no. with in the feeder pillar.

Digital type Ammetesr (0-250A)- 4 M.

Digital type voltmeter (0-500V) - 4 M .

LED indicatore (RYB) of 220V. (3 Nos.)= 1 Set. With 2A SP MCB protection for each indicator.r.

CT 100/5VA -5 class one Epoxy resin cast CT (3 Nos.)=1 Set.

External Lighting Feeder Pillar as above

WATER SUPPLY

Supply and installation of P.V.C. over head water tank- ----all complete as per direction E/I.

Supply of G.I. pipes of Tata or any other ---------- all complete job as per direction of E/I.

(i) 15mm dia

(ii) 20mm dia

(iii) 25mm dia

(iv) 32mm dia

(v) 65mm dia.

Earth work in excavation ( as perI.S. 3114=1965 for laying of differenttypes and sizes of pipes --------------------------------------- as per direction of E/I.

(a)For classification of oil item -B). Rs,34.40/cum

Earth work in back filling ----- all complete as per direction of E/I.

Same as qty sl. No 76/12.1.1.1

Providing and fixing male ended 15mm dia brass bib cock ---------all complete as per direction of E/I.

Providing and fixing brqass/C.I. stop cock of approved quality allcomplete as per specification and direction of E/I.

(A)BRASS STOP COCK

(a) 15mm dia.

(C) 25mm dia weight not less than 1.5 kg.

(d) 32mm dia weight not less than 1.5 kg.

(f) 50mm dia weight not less than 1.5 kg.

cutting chajja or cornice for laying G.I. pipes and restoring the same with R.C.C (1:2:4) brick work in cement mortar (1:4) as per epecification and direction of engineer in charge .

Making holes in walls for laying G.I. pipes and restoring the same after pipe laying as per specification and direction of E/I.

(c) 375mm thick wall

SUPPLYING FITING AND FIXING THE FOLLOWING ITEMS COMPLETE WITH ALL MATERIALS AS PER SPECIFICATION AND DIRECTION OF e/i.

(b) (i) 600x450mm mirrors of 6mm thick.,

©(iii) C.P. brass soap dise contineer medium a good quality with screw and hinge etc.

Supplying materials and labours for construcion of 600x600*x90mm stop cock chamber of brick masonry with 125 mm thick work of desigation 75B in cement mortar (1:6) with 12mm thick cement plaster in C.C (1:6) on inside only having 50mm thick rcc cover having 12mm dia fitting rings,2nos,stop cock chamber will rest over 50mm thcik PCC (1:3:6) over one brick flat soling,including cost of earth work,,all complete jobs,as per approved design ,specification* and direction of E/I.

Supplying fitting and fixing viterous waterland earth ware I.W..C or Tarry Hindustan or any other I.S.S. approved makewith 100mm H.C.I.'P' trap15litress.1. orcopull andlet go flushing ------------- all complete as per direction of E/I.

(A) 580mm long width 1.2.5 liters low ©12.5 lit low level P.V.C. cisterns

Supplying, fitting and fixing40mm high vitreous white glaze earthen E.W.C. with 'p' trap of parry Hindustan or any other approved I.S.S make including supplying and fixing 15 litres C.I mosquito proof low down flushing cistern of approved make with complete fittings with C.I handle and R.S or bracket with telescopic flush pipewith brass coupling and plumbers joints spindle stop cock of approved quality weight not lessthan 450 grams 15mm P.V.C alkathene pipe 45cm. long with brass coupling at both ends and white / black plastic solid stste seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screws etc. painting pipe pipe and cistern etc, with 2coats of approved paint over a coat of red oxide piming, all complete as per specification and direction of E/I

(ii) E.W.C with 'P' trap - (b) With 12.5 lit low level PVC cistem

Supplying fitting and fixing vierous white glazed eathan ware Indian Squating size 600mmx350mm urinal plate of parry hindusan or any other ISS approved make with internal flushing rim,100mm white glazed earthen ware channel about 1m long 5litr, capacity CI automatic flushing cistern of reliance and any other approved make with fitting R.S OR C.I brackets 15mm and 45cm long PVC/ALKATHENE pipe standard GI flush pipe for backand front with spreader fitiing and brass coupling etc. 15mm CI body brass spindle stop cock weight not less then 450 gram all completeincluding painting of exposed parts with 2 coats of apprived paint overacoat of red oxide primer and cutting the wall and floor and making good the same as per specificationand direction of E/I .

(A) Flat back or standing corner (600mm x 350mm) size (large)

Supplying fitting and fixing viteriouswhite glazed earthan ware wash hand basin of parry hindusan or any other ISS approved make supported on painted CI or RS brackets 32mm CI brass waste 15mm dia CI brass spindle stop cock weight not less then 450 gram all completeincluding painting of exposed parts with 2 coats of apprived paint overacoat of red oxide primer and cutting the wall and floor and making good the same as per specificationand direction of E/I

Providing and laying 25 mm thick white makrana marble tiles in risers of step skirting and pillars of approved quality over 12 mm thick base of cement mortar (1:3) and jointed with white cement slurry --do --

EXTERNAL WATER SUPPLY

Providing and fixing male ended 15mm dia brass bib cock of approved quality (Wt. not less than 350 gms.) with extra socket all compere as per specification and direction of E/I.

Providing and supplying High Density Polyethyene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 sutable ford water supply which is available in all standard, like ISI-4984, ISO - 4427 DIN-8074 and various grades like PE-63, PE-80, PE-100 and newly invented PE 100+ materials rates are exfactory excluding transpotation, taxes and duties, contractor profit and overhead charges. Note : CST @2% against Form 'C' and 4% without Form C' would be charged extra.

B - HDPE pipe of materials grade PE80- PN10 (dia in mm) 25 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Cost of Driling 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site.

(a) From 0.00 M to 50.00 M below G.L.

(b) From 51.0 M to125.00 M

(c) From126.0 M to150.00 M

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia

Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by "V" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp

Supplying 100mm dis submersible pump sets confirming to 8034 and motor confirming to IS 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415 + 10, 3HP, 50 Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thurst, water proof winding shall be provided. The pump set shall be suitable for diret coupling Pump shall have suitable outlet as per manufacturers design. Anti thurst stream lined non return valve shall be provided with pump, 3 meter submersible copper conductor cable in single/double run shall be provided with each pump. Submersible pump set 100mm dia (with Polypropylene/Noryl Impeller) up to 20 stages 2 HP

Supplying fitting and fixing 3 crore 4 sqmm Flat copper submersible cable FINOLEX / HEVELS make including all taxes ,royalty etc all complete job as per direction of E/I.

Supply fitting and fixing lowering 40 mm dia G.L. collumn pipe - do - do - all complete job as per direction of E/I.

HORTICULTURE

Supplying and stacking of well decayed cow dung manure at site including loading unloading and carriage for 1km lead.

lumsum

providing and fixing neelgiri /mexocan grass turgf with earth 50mmto 60mmthickness of existing ground prepared wirh propal level and ramming with required tools wooden (dhurmos )and than rolling the surface with light roller make the surface smooth and even ,watering with sprinkler .

Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days ar till the grass froms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately).

In rows 5cm apart in eather direction.

Digging holes in ordidinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1by valume(2parts of stacked volume of earth after reduction by 20%:1part of stacked volume of manure after reduction by 8%)flooding with water ,dressing including removal of rubbish and surplus earth ,if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separatly )

Holes 45 m dia and 45mdeep. (no of Plant.)

Making tree guard as per design from surb plant RED/GREEN Hedge/ Duranta Golden plant supplied, Providing, fixing and 30 days maintained with all complete job. ( Earth Boarder of 0.30m)

SAPLINGS & PLANTS

Foilage/ Shade Loving Plant

Providing and disply of Araucaria cookie plant of 3 ' -3 1/2 ht . Straight. Fresh and healthy lush green leaves from bottom to top ,well development , in 12" E/ pots &as per direction of the officer - in charge.

Providing and displying of Areca Palm plant of ht 3 to 4' with 3-4 branch full of fresh and heathy leave well development in 10" E pots &as per direction of the officer - in charge.

Providing and disply of Croton Petra Bangalore plant of ht 3 to 4' with 3-4 branch full of fresh and heathy leave well development in 10" E pots &as per direction of the officer - in charge.

Providing and disply of Livistoa Palm plant having on3' ht moss 60 cm to 75cm distance, full of fresh and healthy leaves well development ,10" Earthen POTS & as per direction of the offocers -in charge.

Providing and disply of Raphis Palm plant having ht 75 cm to 90cm distance, full of fresh and healthy leaves well development ,10" E POTS & as per direction of the offocers -in charge.

Ornamental Plants

Providing and Displaying Golden COCONUT (Kerala family tree ) well developed with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge.

Providing and Displaying COCONUT (Malesia Green family tree ) well developed having 20 to 25 fresh & healthy leaves 90 to 105 cm ht. in 30 cm Cement Pot as per direction of the officer-in-charge

providing and displying FoxTail plam pant well developed with fresh and helthy foliage leaves of ht 210 to 240 to cm specimen plant in 40 cm cement pot as per direction of the office in charge.

Shrubs Plants

supply and stacking ofplant tecoma stans of heigh 90-105 , 90-105 cm bushy in big size HDPE bag as per direction of the officer in charge

supply and stacking of plant Thuja compacta of heigh75-90 conical shaped well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer in charge

no of plant

NON-SCHEDULE ITEM

Larsen and Turbo 2HP Starters Control Panel for Submersible Pump

FUN ,GAMES AND TOOLS

01. DUST BIN

Donald Duck

Monkey

Rabbit

02. SEE-SAW

Single Board

Double Board

03. MERRY – GO – ROUND

Four Seated Duck Model

Four Seated Star Model

04. SWING

Double swing

Circular swing

Hexa gonal swing

05. SLIDE

Junior Slide

Rainbow Slide

Elephant Slide

Spiral slide

07. SCULPTURE TEAM & ARTISTICS WORKS

Supplying, erecting and fixing of SCULPTURE (AS LIKE CARTOON AND AN ACHIEVEMENT ANIMAL)of approved volume & design, including all civil work for base of sculpture at the specified locations including carriage with all leads and lifts within the site, sculptures should be embedded up to approriate depth and to be erected properly, including all charges & taxes, all complete as per direction of E/I.

08. CONSTRUCTION OF TREE TRUNK AND MONKEY

CONSTRUCTION OF RCC TREE TRUNK OF 7' HEIGHT

CONSTRUCTION OF RCC MONKEY ON TREE TRUNK

CONSTRUCTION OF RCC BIRDS ON TREE TRUNK

09. TRAFFIC SIGN BOARD (Painting)

Designing an Paint of TRAFFIC SIGN BOARD and other signs outside and inside the Park. RS.300/M2 (Design as per Drawing / image)

CCTV SYSTEM

Supplying, installing, testing and commissioning of Dome camera 1/2.8" CMOS, F1.6~F3.3, Fixed Iris, 120dB, 50m IR, 0.001Lux, 1920x1080@30fps, 512 GB SD card slot, IP67, IK10, PoE, Built-in Mic, Audio 1/1, Alarm 2/1, Reset button, Smart VCA function, Face capture mode, Full Metal Housing Make : Pelco/Birdeye/Axis

Supplying, installing, testing and commissioning of Bullet camera 1/2.8" CMOS, F1.6~F3.3, Fixed Iris, 120dB, 80m IR, 0.001Lux, 2592x1944@30fps, 2MP@60fps, 512 GB SD card slot, IP67, PoE, Built-in Mic, Audio 1/1, Alarm 2/1, Reset button, Smart VCA function, Face capture mode, Full Metal Housing. Make : Pelco/Birdeye/Axis

Supplying, installing, testing and commissioning of PVC Junction Box

Supply, Installation, Testing & Commissioning of 43" Commercial display built in Android OS

Supply ,Installation, Testing & Commissioning of Server Grade Machine with Minimum 3 Ghz Processor, 8GB RAM, 1 TB Hard disk along with necessary as required.

Supply of Surveillance Hard Disc Drive 6TB, Make : Seagate/WD/Toshiba

Fire Protection and Fire Detection System

FIRE PROTECTION SYSTEM

Providing, Fixing, Testing & Commisioning of Steel Pipe Medium Grade as per IS-1239 including all fittings such as bend, tees, elbows, reducers including one coat of synthetic priper and two coats of Red Enamel Paint for fire hydrant, Sprinkler and Fire Hose Reel System.

EXTERNAL HYDRANT SYSTEM

150 mm dia.

80mm dia.

Providing, Fixing, Testing & Commisioning of Steel Pipe Medium Grade as per IS-1239 including all fittings such as bend, tees, elbows, reducers including one coat of synthetic priper and two coats of Red Enamel Paint for fire hydrant, Sprinkler and Fire Hose Reel System.

INTERNAL HYDRANT & SPRINKLER SYSTEM

150mm dia

100 mm dia.

80mm dia.

50mm dia

40mm dia

25mm dia

Supplying, installing, testing and commissioning of Standard response chromium plated brass Sprinkler with quartzoid bulb,15mm screwed end connection of 68 deg. C. temperature rating and K factor of 80 and orifice shall not be less than 6mm.

Pendent sprinkler

Providing and fixing swinging type CI Non Return Valve with flap and SS hinges complete including matching flanges, nuts & bolts conforming to IS:5312

150mm dia.

100mm dia

80mm dia

GATE VALVE(150NB)

Y-Strainer (150NB)

CI Butterfly Valve (Wafer Type) with counter flange & nut bolts

150mm dia.

100mm dia

80mm dia

Providing and fixing GM oblique type Hydrant Valve with 63 mm outlet/inlet GM instantaneous female coupling with rubber cap and chain conforming to IS:5290 including matching flange, gasket, nuts & bolts complete.Make : Kartar/Newage/Arihant

a) Single Headed

Providing and fixing 63 mm dia rubberized rubber line hose pipe in 15 mtr length conforming to IS:636 type A ISI marked with gun metal male and female instantaneous coupling conforming to IS:903 wounded with 18 SWG copper wire complete.Make : Kartar/Newage/Arihant

Providing and fixing SS branch pipe with 20 mm nozzle conforming to IS:903 complete.Make : Kartar/Newage/Arihant

Providing and fixing MS Hose Box with lockable arrangements to accommodate 1 RRL hose of 15 M length and 1 no. branch pipe, painted white inside and red outside with one key.Make : Kartar/Newage/Arihant

providing and fixing swinging,wall mounting type First Aid Hose Reel of approved quailty and made from compressed steelm sheet with dust cover,cast iron brackets including 30m long,19mm nominal bore,high pressure braided rubber hose as per IS:444 Type hose guide, PVC Shut off nozzle with 6mm outlet and 25mm nominal bore gun matel inlet valve Make: Kartar/Newage/Arihant

TWO WAY INLET

Air Release Valve 25mm

BALL VALVE (15 MM)

BALL VALVE (25 MM)

Pressure gauge

Pressure swtich

FIRE PUMPS & PANELS EQUIPMENTS

Supply, erection, testing & commissioning of electrical motor driven main pump of horizontal In Line Type end suction pump capable to deliver 2850LPM against head of 60M (to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost Hydrant) . Fire pump shall have C.I. casing, bronze impeller (hard finished and dynamically balanced) and S.S. (304) Shaft with mechanical seal. The installation shall be complete with necessary pressure gauge with gun metal shut of cock on delivery side. (The pump should be tested for bench mark at factory and shall be gotten approved by the Local fire Authority). (HYDRANT PUMP)

HYDRANT PUMP 2280LPM,60M HEAD

Supply, Installation, Testing and Commissioning of electric driven, horizontal type, single/multistage, end suction type, centrifugal pump of cast iron body, C.I impallers with carbon steel shaft & mechanical seal directely coupled with TEFC SQ cage foot mounted type induction motors suiitable for operation on 3 phase, 415 volts 50 Hz AC supplywith IP 55 protection for enclosurewith F class insulation confirming to IS: 325 includingcommon base frame fabricated from min. 75X50 mm M.S channel, coupling with guard foundation bolts, pressure gauge, anti-vibration pads, cement concrete foundation etc. complete in all respect as required or as directed by engineer incharge.

JOCKEY PUMP 180 LPM, 60 M head

Terrace pump 450 lpm, 30 M head

Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm. thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3 phase 50 HZ AC supply with enclosure protection class IP 42 with 400 Amp aluminium bus bar as required.

Fire pumps panel

Incoming

1 No. 200 Amp, TP&N MCCB

0-400 Amp digital ammeter with one set of current transformer

0-500 volt digital voltmeter with RYB indicator lamps, HRC control fuses.

Outgoing

1 Nos of 200 Amp TP&N MCCB (1 No for EDFP )

1 Nos of (suitable for 40 HP pump) DOL starter with over load protection, current sensing type single phase preventer with all accessories and internal wiring complete as required for automatic operations (1 No for EDFP)

1 sets 0-400 Amp digital ammeter and 1 sets current transformers.

Manual DOL Starter (For Terrace pump) (5HP)-2 pcs

Note:- Potential free terminal to be provided for BMS

FIRE DETECTION SYSTEM

Supply & Installation of CONVENTIONAL type Fire Alarm and Control Panel with battery(4 ZONE ). Make :Ravell/Agni

Supplying,installation,testing and commissioning of optical/ photoelectric type Smoke detector pr heat detector aas per requirement and mounting base with Led light complete as requried. Make : ASES AGNI

Providing and Fixing Manual Call Point. Make : Ravell/Agni

Providing and Fixing Hooter 24 V suitable for the Control Panel.Make : Ravell/Agni

Providing & Fixing 2 core 1.5 sq mm FRLS wires (in pvc conduits).Make : Polycab/Mescab

FIRE EXTINGUISHERS

Providing and fixing Carbon di Oxide fire extinguisher consisting of welded MS cylindrical body, squeeze lever, discharge valve, fitted with internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, finished externally with red enamel paint, & fixed to wall with brackets with initial charger.Make :- Kanex/Safex/Minimax

Capacity 4.5 kg ISI Marked

Providing and fixing ABC Extinguisher consisting of welded MS cylindrical body with discharge valve, nozzle and hanging arrangement complete.Make :- Kanex/Safex/Minimax

a) Capacity 6 kg ISI Marked

Oneric Smart Television Tv 49 inch Smart TV (Android TV)

LG Electronics - Air Conditioner

Supply of 5.5 TR nominal capacity Ceiling suspended type Inverter Ducted air conditioner with Inverter type Compressor, air cooled condenser of Cu coil & Al fin, evaporator coil, electronic expansion valve, etc. Condenser Al fins should be coated with anti-corrosive layer in addition with hydrophilic layer. Unit should be compatible with R4ioa/eco•friendly refrigerant. Make: Mitshubishi Electric/Daikin/LGJO•GENERAL

Installation, testing & commissioning of 5.5TR Inverter Ducted air conditioner with R410a refrigerant, RCC/MS pedestal, etc.

Supply, installation, testing & commissioning of Cu refrigerant pipe with Nitrile rubber insulation of below sizes.

9.52mm dia with 13mm insulation

15.9mm dia with 13mm insulation

19.05Mrn dia with 13mm insulation

Supply & charging of R4loa/eco-friendly refrigerant

Air distribution ducting made out of G.S. sheet including collars, class VII/VIII conforming to iS 655 including supports, bracing, flanges, turning vanes, fastners, rivets, gaskets, nuts & bolts, etc. complete at every 2.4 m c/c & at bends etc. as per specifications. Both the Supply & return air duct to be insulated.

Duct Size o - 750 mm : 24 Gauge

Duct Size 751 - 1500 rillTi : 22 Gauge

Supply, installation, testing & commissioning 19mnn thick Closed cell Nitrile rubber insulation for thermal insulation of the GSS duct

Supply, installation, testing and commissioning of 15mm thick open cell nitrile rubber accoustic insulation (of 140-18o kg/cu.m density) from inside the ducts, as per specifications.

Supply, installation, testing and balancing of powder coated extruded Aluminum grilles (0 /15 / 3o Deg) without volume control dampers in accordance with the approved shop drawings and specifications

Supply, Installation, testing and balancing of aluminum volume control collar damper anodized in matt black shade in accordance with the approved shop drawings and specifications.

Supply, installation, testing and balancing of galvanized steel construction opposed blade volume control duct dampers, blades Bt casing both to be of 16G GSS as per approved drawings and specifications.

Supply, installation, testing and commissioning of motorized smoke and fire damper complete with control panel, inter connecting wiring at locations shown in approved shop drawings and as per specifications. Fire Damper to be UL5555 listed and to have at least 1% hour fire rating.

Fire and smoke Dampers

Actuators

Supply, laying & commissioning of 4CX1.5 sqmm Cu conductor flexible control cable

Underdeck insulation with 19mm Closed Nitrile Rubber insulation of 40-6o kg/cu m density Make: K-flex/HIRA/Thermobreak

Supply of 3.oTR nominal capacity single phase inverter Cassette AC with inverter type compressor, electronic expansion valve, Cu condenser coil, evaporator coil, etc Make: Mitshubishi ElectriciDaikin/LGIO-GENERAL

TYRE for TRACK

Dimension- 7X59.7X59.7 CM Brand - Ceat Tire Type - Tube Tyre Bike Type - Road Bike Material - Rubber

LOOM SOLAR CLASS A SOLAR PANEK FOR OUTDOOR PURPOSE (MONO PERC 375W)

Polyester Plain Colorful Umbrella, Size: 30-40 Inch ( Diameter ) Color : VIGYOR (7Set Design)

MINIATURE MODEL and SCULPTURE

Supplying, erecting and fixing of SCULPTURE (AS LIKE CARTOON AND TRAFFIC POLICE)of approved volume & design, including all civil work for base of sculpture at the specified locations including carriage with all leads and lifts within the site, sculptures should be embedded up to approriate depth and to be erected properly, including all charges & taxes, all complete as per direction of E/I.

Supplying, erecting and fixing of MINIATUIRE MODEL (AS LIKE PETROL PUMP, HOSPITAL)of approved volume & design, including all civil work for base of sculpture at the specified locations including carriage with all leads and lifts within the site, sculptures should be embedded up to approriate depth and to be erected properly, including all charges & taxes, all complete as per direction of E/I.

CARVING WORK (FRONT FAÇADE) OF KIOSK POLLAND STYLE

CARVING WORK - SHOP Design as per drawing

CARVING WORK - Passage Design as per drawing

CARVING WORK TOILET - DIRT BIKE SHAPE

CARVING WORK - TOILET Design as per drawing

CARVING WORK on CAR STYLE MAIN GATE

Design in a shape of CAR (MAIN GATE) Design as per drawing

CARVING WORK on MUSUEM BUILDING (FRONT FAÇADE)

CARVING WORKS on MUSUEM FAÇADE with painting materials 50.0 m2x@2500/m2

CARVING WORK on Boundary Wall (Main)

CARVING WORKS on B.wall with painting materials 50.0 m2x@2500/m2

Carving Work Plate on Boundary Wall

OFFICE EQUIPMENT

XEROX MACHINE

LAMINATION

FAX MF

MODEM

COMPUTER MONITOR 19.5 INCH

PRINTER

INTERNET WIRING & INSTALLATION

WEBCAM

PROJECTOR

MULTIMEDIA PROJECTOR

MEGNETIC BOARD

DVD EXTERNAL

Add 18% GST

Add 1% Labour cess 1%

M/S B D Enterprises