Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹9.8 L
EMD Value
₹9,800
Closing Date
10 Apr 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE, EUDC-I, NOIDA
33/11 KV SUBSTATION, SECTOR-18 FIRST FLOOR, OPPOSITE SAB MALL, NOIDA
CAPACITY ENHANCEMENT 03 NOS LT SUBSTATION AT VARIOUS PLACES UNDER EUDD 1 NOIDA
2023_PVVNL_783633_1
98/EUDC-I/2022-23/NOIDA (WORKS) (SHORT TERM)
Open Tender
Electrical Works
Item Rate
IN AREA OF EUDSD-I, NOIDA
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
EE, EUDD-I, NOIDA
₹9,800
13 Apr 2023
11 Mar 2023
10 Apr 2023
11 Mar 2023
10 Apr 2023
11 Mar 2023
Amount
FOLLOWING WORK CAPACITY ENHANCEMENT (250 KVA TO 400 KVA) OF OVERLOAD 250 KVA 11/0.4 KV T/F SITUATED AT BHOOLE PRADHAN VILLAGE BAHLOLPUR SECTOR-65 NOIDA IN AREA OF EUDSD-I, NOIDA :-
Cartage of ST poles 11 mtr long from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.
Cartage of other line material such as MS channel (Dropper) 100x50x2028mm (01 No.), Stone Pad 300x300x75mm (02 Nos.), MS Top Channel 125x65x2240mm (01 No.), 11KV Disc Insulator with fitting (03 Nos.), MS channel 100x50x2028mm (01 No.), 11 KV Pin Insulator (6 Nos.), 11 KV Fuse Set (01 No.), MS Earthing Rod of 20x2500mm 6 SWG earthing wire etc. (02 Nos.), etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.
Cartage of LT PVC Cable Al. 1x630 Sq.mm. (40 Mtrs.) & LT PVC Cable Al. 3.5x240 Sq.mm. (40 Mtrs.)from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.
Fixing of Stone Pad.
Fabrication & fixing of MS channel / Angle complete in all respects.
The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support.
Erection of Double Pole on 11 Mtr. long ST Pole for LT line including fixing of all accessories of LT line as per RESPO schedule Complete in all respects.
Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects.
Construction of Plinth in size 450x450x300 mm of each (0.285 Cum) pole above the ground level (In ratio of 1:3:6 in Cement, sand and Brick Ballast) as per RESPO schedule Complete in all respects.
Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects.
Laying of LT PVC Cable Al. 1x630 Sq.mm. (40 Mtrs.) & LT PVC Cable Al. 3.5x240 Sq.mm. (40 Mtrs.) including fixing of all accessories as per RESPO schedule Complete in all respects.
Providing of Holding clamp with bolt & Nuts.
Fixing of above Holding clamp with bolt & Nuts.
Providing of Copper L-Piece 62x225x12mm (LS).
Fixing of above Copper L-Piece 62x225x12mm (LS).
Providing of Al. Crimping Lugs 630 Sq.mm.
Fixing of above of Al. Crimping Lugs 630 Sq.mm.
Providing of Al. Crimping Lugs 240 Sq.mm.
Fixing of above of Al. Crimping Lugs 240 Sq.mm.
Construction of new distribution 400 KVA T/F Plinth. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level with 15 CM thick top CC slab. The above work includes Excavation of earth, laying of bring ballast pad for foundation brick work, CC and plastering and proper curing complete with all respects as per RESPO schedule.
Safe loading and carriage of 400 KVA Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends
Mounting, installation of 400 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.
Water level earthing of 400 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)
Providing and installation of LT ACB 400 Amp. with cabinet / structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-
400 amp. 03 pole fixed manual ACB.
Red/yellow/blue light indication
ON & OFF Indication
Amp., Volt meter& energy meter digital
Metering C.T 400/5A,
Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.
Fabrication of aluminium bus-bar for each phases
Incoming size 425 mm x 50mmx12 mm (twin)
Out going size 720 mm x 50mm x 12 mm(twin)
Neutral size 900mmx50mmx12 mm.
Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.
Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.
Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.
Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.
Water level earthing of A.C.B. with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)
Providing of 11 KV Fuse set complete of best quality as per requirement for completion of work due to not available in store.
Installation of above 11 KV Fuse Set with required items complete in all respect.
WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT ABOVE PLACE AS PER FOLLOWING :-
Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)
Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)
Dismantling of 250 KVA T/F (Old & Used) from work site plinth with opening of jumper / connection etc.
Carriage of after dismantled 250 KVA T/F (old & used) from works site to JE store / central store & proper stacking with loading & unloading.
FOLLOWING WORK CAPACITY ENHANCEMENT (100 KVA TO 400 KVA) OF OVERLOAD 100 KVA 11/0.4 KV T/F SITUATED AT KRISHNA COLONY VILLAGE BAHLOLPUR SECTOR-65 NOIDA IN AREA OF EUDSD-I, NOIDA :-
Cartage of other line material such as MS channel 100x50x2028mm (01 No.), 11 KV TPMO (01 No.), 11 KV Fuse Set (01 No.), LT Distribution Box 3 PH (10 Nos.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.
Cartage of LT PVC Cable Al. 1x630 Sq.mm. (40 Mtrs.) & LT PVC Cable Al. 3.5x240 Sq.mm. (30 Mtrs.)from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.
Cartage of Cable LT ABC of size 3x120+1x95+1x35 Sq.mm. from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.
Fixing of LT Distribution Box 3 PH.
Fabrication & fixing of MS channel / Angle complete in all respects.
Laying of LT PVC Cable Al. 1x630 Sq.mm. (40 Mtrs.) & LT PVC Cable Al. 3.5x240 Sq.mm. (30 Mtrs.) including fixing of all accessories as per RESPO schedule Complete in all respects.
Laying, Lifting and final Binding, Sagging of LT ABC of size 3x120+1x95+1x35 Sq.mm. including fixing of all accessories as per RESPO schedule Complete in all respects.
Providing of Holding clamp with bolt & Nuts.
Fixing of above Holding clamp with bolt & Nuts.
Providing of PCC Pole Clamp with bolt & Nuts.
Fixing of above PCC Pole Clamp with bolt & Nuts.
Providing of Suspension Clamp with I-Hook.
Fixing of above Suspension Clamp with I-Hook.
Providing of Dead End Clamp with I-Hook.
Fixing of above Dead End Clamp with I-Hook.
Providing of LT Piercing connector.
Fixing of above LT Piercing connector.
Providing of Copper L-Piece 62x225x12mm (LS).
Fixing of above Copper L-Piece 62x225x12mm (LS).
Providing of Al. Crimping Lugs 630 Sq.mm.
Fixing of above of Al. Crimping Lugs 630 Sq.mm.
Providing of Al. Crimping Lugs 240 Sq.mm.
Fixing of above of Al. Crimping Lugs 240 Sq.mm.
Construction of new distribution 400 KVA T/F Plinth chair type. The size of plinth shall be 2 Mtrs. long, 2 Mtrs. wide and height 1.5 Mtrs. from ground level complete with all respects as per RESPO schedule.
Safe loading and carriage of 400 KVA Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends
Mounting, installation of 400 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.
Water level earthing of 400 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)
Providing and installation of LT ACB 400 Amp. with cabinet / structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-
400 amp. 03 pole fixed manual ACB.
Red/yellow/blue light indication
ON & OFF Indication
Amp., Volt meter& energy meter digital
Metering C.T 400/5A,
Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.
Fabrication of aluminium bus-bar for each phases
Incoming size 425 mm x 50mmx12 mm (twin)
Out going size 720 mm x 50mm x 12 mm(twin)
Neutral size 900mmx50mmx12 mm.
Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.
Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.
Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.
Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.
Water level earthing of A.C.B. with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)
Providing of 11 KV TPMO set complete of best quality as per requirement for completion of work due to not available in store.
Installation of above 11 KV TPMO Set with required items complete in all respect.
Providing of 11 KV Fuse set complete of best quality as per requirement for completion of work due to not available in store.
Installation of above 11 KV Fuse Set with required items complete in all respect.
WORK OF PROVIDING AND FIXING OF 01 NOS. NEW FIBER FENCING OF 11/0.4 KV L.T. SUB-STATION INSTALLED AT ABOVE PLACE AS PER FOLLOWING :-
Providing & Fixing of new FIBER fencing frames of size 12'X15'x6' for each fencing of LT Sub-stations.) (All Material provided by contractor for above work.)
Construction of boundry / toe wall in bottom of fencing in brick work cement mortar 1:6 (1 cement : 6 coarse sand) for link in the size of 0.22mx0.60m (0.30m in earth, 0.30m above ground level) including plaster in cement mortar 1:4 and finishing with water proof cement paint. (Approx construction 12 Mtrs. boundry / toe wall for each fencing of LT Sub-stations.) (All Material provided by contractor for above work)
Dismantling of 100 KVA T/F (Old & Used) from work site plinth with opening of jumper / connection etc.
Carriage of after dismantled 100 KVA T/F (old & used) from works site to JE store / central store & proper stacking with loading & unloading.
FOLLOWING WORK CAPACITY ENHANCEMENT (63 KVA TO 250 KVA) OF OVERLOAD 63 KVA 11/0.4 KV T/F SITUATED AT NEAR A-40 SECTOR-64 NOIDA IN AREA OF EUDSD-I, NOIDA :-
Cartage of other line material such as MS channel 100x50x2028mm (01 No.), 11 KV Fuse Set (01 No.) etc. from ESC Noida/Sahibabad/Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.
Cartage of LT PVC Cable Al. 1x630 Sq.mm. (40 Mtrs.) & LT PVC Cable Al. 3.5x240 Sq.mm. (40 Mtrs.)from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends.
Fabrication & fixing of MS channel / Angle complete in all respects.
Laying of LT PVC Cable Al. 1x630 Sq.mm. (40 Mtrs.) & LT PVC Cable Al. 3.5x240 Sq.mm. (40 Mtrs.) including fixing of all accessories as per RESPO schedule Complete in all respects.
Providing of Holding clamp with bolt & Nuts.
Fixing of above Holding clamp with bolt & Nuts.
Providing of Copper L-Piece 62x225x12mm (LS).
Fixing of above Copper L-Piece 62x225x12mm (LS).
Providing of Al. Crimping Lugs 630 Sq.mm.
Fixing of above of Al. Crimping Lugs 630 Sq.mm.
Providing of Al. Crimping Lugs 240 Sq.mm.
Fixing of above of Al. Crimping Lugs 240 Sq.mm.
Strengthing of existing plinth chair type as per site requirement complete with all respects as per RESPO schedule.
Safe loading and carriage of 250 KVA Transformer from ESC Noida/Sahibabad/ Ghaziabad /Any other ESC of Meerut Discom to JE Store and from JE store to site of work including loading and unloading at both ends
Mounting, installation of 250 KVA Transformer on above Plinth, alongwith double earthing of the same, complete in all respect as per RESPO schedule.
Water level earthing of 250 KVA transformer (body and neutral) with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)
Providing and installation of LT ACB 400 Amp. with cabinet / structure (Make L&T, Schneider, ABB, Hevell's) as per following specification with all relevant certificate :-
400 amp. 03 pole fixed manual ACB.
Red/yellow/blue light indication
ON & OFF Indication
Amp., Volt meter& energy meter digital
Metering C.T 400/5A,
Panel fabrication of size 1250mm x 900mm x 600 mm made of M.S sheet 14 gauge with powder coating with panel lock and key arrangement.(two nos). and additional locking arrangement seprately including providing hut type shape as per drg.
Fabrication of aluminium bus-bar for each phases
Incoming size 425 mm x 50mmx12 mm (twin)
Out going size 720 mm x 50mm x 12 mm(twin)
Neutral size 900mmx50mmx12 mm.
Fabrication of pannel stand made of M.S Angle of size 900mm x 600mm x 500 mm as per drg.
Assembly of above ACB, Indicators, Meters, Metering CT & bus bar arrangment in the panel, fitting the panel on Stand with nut and bolts with wiring etc. & grouting in ratio 1:4:8 with cement, coarse sand and brick blast.
Providing and fixing of aluminium bus bar of size 300mmx60mmx12 mm on L.T side of T/F.
Making all connections with ACB & Distribution T/F and commissioning the ACB complete in all respect.
Water level earthing of A.C.B. with M.S. earhting strips of best quality (ISI mark) as per RESPO norms. (All material wiil be provided by the contractor for Earthing)
Providing of 11 KV Fuse set complete of best quality as per requirement for completion of work due to not available in store.
Installation of above 11 KV Fuse Set with required items complete in all respect.
Dismantling of 63 KVA T/F (Old & Used) from work site plinth with opening of jumper / connection etc.
Carriage of after dismantled 63 KVA T/F (old & used) from works site to JE store / central store & proper stacking with loading & unloading.
ANJNI TRANSFORMER AND SWITCH GEARS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .