SPL REPAIR TO BLDG NO P-7, 836 AND 837 AT PMS UNDER GE PANAGARH

Amount

(Sch A Part-I):-

Roof treatment to be concluded in stages as mentioned below. complete all as specified and directed: - STAGE I: Demolition of old existing unserviceable roof treatment included cement concrete of any description and in any position from existing roof surface (upto maximum height of 10 metres from natural ground level) with power driven pneumatic chisel and including removal of debris and washing down with water to remove dust, foreign items. STAGE II: Preparation of old surface and applying two coat of latex power bonding agent at the ratio of 1:4:6 (Latex power:Water:Cement) in a criss cross way [Note :- Second coat of latex is laid down minimum interval of 6-8 hours of first coat of latex and after second coat of latex immediate applied plaster work] STAGE III: M&L 40 mm thick average Plain Cement Concrete 1:2:4 type B-0 (12.5 mm graded stone aggregate) as in padding concrete on roof.

Item No. 1.001 Contd.... STAGE IV: Rendering 10mm thick on fair faces on roof surfaces of concrete in Cement Mortar 1:4 finished even and smooth without using extra cement and WPC [Note :- WPC will measured and paid separately under relevant item of schedule.] STAGE V: Providing water proofing treatment with a layer of APP based polymeric membrane 3mm thick minimum weighing 3.60kg/sqm reinforced with polyster non wove fabric (wt. not less than 160 gms/sqm) shall be applied over one coat of cold bituminous primer @ 0.40 ltr/sqm (membrane shall be laid using butane torch sealing all joints etc and also include two coat of aluminium paint over APP based polymeric membrane complete all as specified and directed. [Note: The over lap shall be of minimum 75mm in longitudinal direction and 100mm on transverse direction]

M&L Plain Cement Concrete(1:2:4) type B-0 (using 20mm graded stone aggregate) as in roof kerbs or mud stop rounded, complete all as specified and directed.

M&L Providing water proofing treatment with a layer of APP based polymeric membrane 3mm thick minimum weighing 3.60kg/sqm reinforced with polyster non wove fabric (wt. not less than 160 gms/sqm) shall be applied over one coat of cold bituminous primer @ 0.40 ltr/sqm (membrane shall be laid using butane torch sealing all joints etc and also include two coat of aluminium paint over APP based polymeric membrane complete all as specified and directed. [Note: The over lap shall be of minimum 75mm in longitudinal direction and 100mm on transverse direction]

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old unserviceable pre-painted galvalume sheet, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old unserviceable pre-painted galvalume sheet, complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, complete all as specified and directed.

S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, including dismantling of old unserviceable truss, complete all as specified and directed.

S&F Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde E- 250) quality A including dismantling of old unserviceable one, complete all as specified and directed.

S&F mild steel screws bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screw the other or screwed both end to be fitted with wahsers and on hexagonal or square exc 5 cm but n. exc 10 cm long, complete all as specified and directed.

S&F Mild steel bolts with diameter of neck exc 12 n.exc 20mm purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and directed.

M&L 25mm thick Cement concrete type B-0, 1:2:4 (20mm graded stone aggregate) as sub base of floor including demolition of old unserviceable cement floor, complete all as specified and directed.

M&L Vitrified tiles any shade any pattern fully body 15 mm thick (square/ rectangular) polished, area of each tiles exceeding 1.00 sqm but not exceeding 2.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in Cement Mortar 1:6 or adhesive solvent wherever required and including dismantling of old unserviceable tile work, complete all as specified and directed. [Note :- The adhesive solvent will be mixed as per manufacturer's instruction.]

M&L Vitrified tiles any shade any pattern fully body 15 mm thick (square/ rectangular) polished, area of each tiles exceeding 1 sqm but not exceeding 2.00 sqm, on vertical surface such as skirtings etc. set and jointed in cement slurry over 10 mm thick rendering in Cement Mortar 1:3 including dismantling of old unserviceable tile work, complete all as specified and directed.

M&L exterior heavy duty tiles dark shade 12 mm thick (square/rectangular) each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in foothpath etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in Cement Mortar 1:6 including dismantling of old unserviceable tile work, complete all as specified and directed.

M&L Glazed ceramic tiles Coloured 450 x 300mm 7 to 8 mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over 10 mm thick in Cement Mortar 1:3 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces, including dismantling of old unserviceable tile work, complete all as specified and directed.

M&L 16 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed in Cement Mortar 1:6 including dismantling of old unserviceable stone work, complete all as specified and directed.

Rounding to edges of stone slabs exposed edge, such as in steps, cooking platform and other similar situation, complete all as specified and directed.

Taking down the wooden/UPVC/Aluminium shutter/window with frame and refixing in other opening after easing and adjusting,area exc 1 sqm but n.exc 2 sqm each, complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed.

Taking down of chowkats or frames not exc 1.5sqm each with shutters (without taking off shutters from frames ), complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS scews having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed [Note :- (i) M.S. hold fast/lugs or SS dash fasteners shall be paid for separately. (ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile demension on plus side shall be acceptable but no extra payment on this account shall be made.]

S&F factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum frame density of 650 kg/cum, screw withdrawal strength of 1800N (face) and 900N (Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. [Note :- Stainless steel butt hinges and necessary SS Screws shall be paid separately]

S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed.

Item No. 1.030 Contd.... [Note: (i) Glass or wiremesh shall be paid separately. (ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.]

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 , the grill shall be inserted in the wall surface including necessary drilling and grouting with cement etc complete all as specified and directed.

S&F Sheet glass 5.5 mm thick , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Taking down and refixing in same opening of 12mm thick toughen glass including all necessary fittings, complete all as specified and directed. [Note :- All Stainless steel and other fittings/fixtures are included in the rate]

Taking down and refixing in same opening of 12mm thick toughen glass door with automatic sensor kit including all necessary fittings, complete all as specified and directed.

S&F 12 mm thick toughened glass as in hinged doors, partitions and similar work including cutting to shape , drilling holes required complete all as specified and directed.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, suitable for toughened glass door other parts made of mild steel heavy duty and fixed compelete all as specified and directed.

S&F stainless steel entrance main glass door pipe pull handle (length 18", hole to hole size 14" ) with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, with suitable arrangement, complete all as specified and directed.

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre & Providing and fixing 12mm thick plaster of paris ceiling any type of design/shape (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh including dismantling of old unserviceable ceiling structure and ceiling board, complete all as specified and directed.

S&F powder coated aluminium snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including 6mm thick non asbestos fibre cement designer building boards fixed or laid on aluminium frame/grid with screws including dismantling of old unserviceable false ceiling, complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall/ceiling to make PVC frame as per specification and drawing, complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including dismantling of old unserviceable wall lining work, complete all as specified and directed.

S&F stainless steel butt hinges 100mm long heavy weight complete all as specified and directed.

S&F aluminium anodised 150 mm barrel tower bolts of extruded section of brass, complete all as specified and directed.

S&F 150 mm long extruded brass handles, fabricated type polished, complete all as specified and directed.

S&F in repair for 300 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

M&L old size brickwork with fly ash old size bricks straight or curved on plan to any radius built in Cement Mortar 1:6, including dismantling of old unserviceable brickwork complete all as specified and directed.

All as item No. 1.044 but except bricks, complete all as specified and directed.

M&L old size brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in Cement Mortar 1:4 including dismantling of old unserviceable brickwork, complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15 mm thick cement plaster in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

M&L Rendering 15 mm thick cement plaster in Cement Mortar 1:4 on fair faces of brick/concrete surfaces with finished even and smooth without using extra cement and using water proofing compound admixture as per manufacturer's instruction, complete all as specified and directed. [Note :- WPC will measuered and paid separatly under relevant item of schedule.]

M&L rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3 finished even and smooth (without using extra cement) with chicken wire mesh, complete all as specified and directed.

S&F 0.60mm thick stainless steel chicken wire mesh to fix in joint, crack area of column, beam and other similar area complete all as specified and directed.

Supply only liquid water proofing compound, complete all as specified and directed.

M&L applying two coats of plastic emulsion paint on decorated or un- decorated plastered or unplastered surfaces of wall over a coat of wall primer after providing and applying plaster of paris putty of 1 to 1.5mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces with 1mm thick wall care putty complete all as specified and directed.

M&L complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti and mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down with water including applying 1mm thick wall care putty to make the surface even and smooth by using sander machine (with provision of dust sucking) as directed by Engineer-in-charge, after preparing the surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceiling and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer with 1 to 1.5mm thick putty, of required shade and colour complete, as per manufacturer's specification, complete all as specified and directed.

M&L complete removal of existing treatment (any layers of existing treatment ) from walls/pillars/cornices by scraping down with using steel patti and mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-charge, brooming and washing down with water including applying 1 mm thick wall care putty to make the surface even and smooth by using sander machine (with provision of dust sucking) complete all as specified and directed, after preparing the surfaces applying two coats of plastic emulsion paint , of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

M&L complete removal of existing treatment (plastered/unplastered) of ceiling by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying 1mm thick wall care putty for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) as directed by Engineer-in-charge and after preparing the surface smooth applying two coat of oil bound distemper on ceiling surfaces with paint brush complete all as specified and directed.

M&L reinforced cement concrete (Design Mix) M-25 (20mm graded stone stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc including demolition of old unserviceable RCC, complete all as specified and directed.

M&L reinforced cement concrete (Design Mix) M-25 (20mm graded stone stone aggregate) in columns, pillars, piers, including demolition of old unserviceable RCC, etc complete all as specified and directed.

M&L reinforced cement concrete (Design Mix) M-25 (20mm graded stone stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span including demolition of old unserviceable RCC, complete all as specified and directed.

M&L Reinforced Cement Concrete (design mix), M-25 (20mm graded stone aggregate) for chajjas including demolition of old unserviceable RCC, complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L TMT bars 6mm to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.

Formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions for fair finished surfaces of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surface complete all as specified and directed.

M&L removing of cavities roughening the smooth surface scrapping out/removing corrosion all loose/scale/rust etc from the visible reinforcement by applying rust remover @ 20 ml per sqm or as per manufacturer's instruction, rust removal and cleaning the steel reinforcemnt properly and then applying 40 micron thick dry thickness coat of epoxy zinc primer @ 250 ml per sqm or as per manufacturer' s instructions of exposed and new steel reinforcement (measured flat) complete all as specified and directed.

M&L welding mild steel wire mesh weighing not less than 1 kg sqm and primed with Nitco zinc primer , fixing to the prepared concrete surface through proper fixing arrangements and applying 40mm thick average cement mortar with guniting /shotgun at a pressure not less than 4 kg sqm in ratio 1:2 mixed with liquid water proofing compound chemical not less than 5% by weight of cement including lapping of new reinforcement to the rusted portion all as per manufacturer's instructions and carried out the work as per procedures complete all as specified and directed.

M&L in repairs 4mm thick ACP board (Aluminium composite panel), exterior grade, (approved colour) fixed with GI/aluminium tapperd clip to aluminium frame work complete all as specified and directed.

M&L 75mm Plain Cement Concrete 1:3:6 type C1 (using 40mm graded stone aggregate) fininshed the as in plinth protection surfaces even and smooth without using extra cement including demolition of old unserviceable PCC, complete all as specified and directed.

M&L forming construction joint (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A, complete all as specified and directed.

M&L in repairs providing plain cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) as in coping to chajja tops and all other similar works complete all as specified and directed.

S&F in repairs PVC waste pipe 32/ 40 mm dia of standard length suitable for WHB as required at site complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.

S&F 16 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors including taking down of old unserviceable existing pipe, complete all as specified and directed.

S&F 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors including taking down of old unserviceable existing pipe, complete all as specified and directed.

S&F in repairs for stainless steel urinal sensor tap for urinal half stall complete all as specified and directed.

S&F 15mm bore angle cock chromium plated concealed with long shank type screwed down, high pressure complete all as specified and directed. [Make : Jaquar (Cat Part No FLR-CHR-5053N or similar in make as mentioned in the list of makes in Particular Specifications]

S&F Grating with waste hole square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs extendable stainless steel double curtain rod with brackets for door & windows adjustable length heavy duty telescopic drapery pole with half round finials complete all as specified and directed.

S&F in repairs PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall with steel clamps all as specified and directed.

S&F PVC SWR bends of 110 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia, complete all as specified and directed.

S&F commerical modular kitchen with all accessorirs as mentioned below complete including taking down modular kitchen accessories of any type/any position like cladding or embedded on wall like ss chimney, plate rack, two sink unit and ss hood with ss filter etc for the kitchen area n. exc 166 sq , complete all as specified and directed. (a) SS Rack for crocery ,cutlery and utensils (4 Shelf) Specification: side and shelf 22g,leg 40x40 18g ss pipe Adjustable PVC Bullet 40x40 SS Grade 304 , size= 60"x18"x60" with all accessories - 01 nos. (b) Food Pick up table Specification:top 18g, Side and shelf 22g,leg 40x40 18g ss pipe Adjustable PVC Bullet 40x40, SS Grade 304, Size- 72"x24"x32"+2O/S + 2U/S with all accessories - 01 Nos. (c) SS Table for Salads and Garnishing Specification:top 18g and shelf 22g,leg 40x40 18g ss pipe,Adjustable PVC Bullet 40x40,SS Grade 304, Size- 60"x24"x32"+6"+2U/S with all accessories - 01 Nos. (d) Side Table for Masala Specification:top 18g and shelf 22g,leg 40x40 18g ss pipe,Adjustable PVC Bullet 40x40,SS Grade 304, Size- 36"x18"x32"+6"+ 1 U/S, with all accessories - 01 Nos. (e) Bulk Cooking Range Specification:top 18g ,leg 40x40 18g ss pipe Adjustable PVC Bullet 40x40 , G 12 Indian Burner 1 , heavy NCV 1 with pilot,SS Grade 304, Size- 24"x24"x24, with all accessories - 03 Nos.

Item No. 1.089 Contd.... (f) Two Sink Unit Specification:Top 18g ,leg 40x40 18g ss pipe Adjustable PVC Bullet 40x40,SS Grade 304, Size-45"x24"x32"+6" with all accessories - 01 Nos. (g) SS Tandoor (Gas + Charcoal) Specification:top 18g and side 22 g ,MS Wheel 5" total , Handi Clearance 16" , with SS Cover,SS Grade 304, Size-30"x30"x34" with all accessories - 01 Nos. (h) SS tandoor Side table Specification:top 18g and shelf 22g,leg 40x40 18g ss pipe Adjustable PVC Bullet 40x40,SS Grade 304, Size-36"x18"x32"+6"+1u/S with all accessories - 01 Nos. (j) Side table Specification:top 18g and shelf 22g,leg 40x40 18g ss pipe,Adjustable PVC Bullet 40x40,SS Grade 304, Size-45"x24"x32"+6"+2U/S with all accessories - 03 Nos. (k) Chappati Range with Buffer 10 mm Tawa: Top of 18 swg 202 prime ss sheet . Shelf 22 g 202 prime The top is mounted on heavy duty ss tubular legs 40x40 18 swg with adjustable bullet feet and cross bracing,SS Grade 304, Size- 60"x24"x32"+6" with all accessories - 01 Nos. (l) Working table Specification:top 18g and shelf 22g,leg 40x40 18g ss pipe,Adjustable PVC Bullet 40x40,SS Grade 304, Size- 60"x24"x32"+6"+2U/S with all accessories - 02 Nos. (m) Chappati Rolling table Specification:top Granite and shelf 22g,leg 40x40 18g ss pipe,Adjustable PVC Bullet 40x40,SS Grade 304, Size-60"x24"x32"+6"+1U/S with all accessories - 01 Nos.

Item No. 1.089 Contd.... (n) Two Burner Range Specification:top 18g and side and shelf 22g,leg 40x40 18g ss pipe Adjustable PVC Bullet 40x40 , G 10 Indian Burner 2 , heavy NCV 4 with pilot,SS Grade 304, Size-45"x24"x32" with all accessories - 01 Nos. (o) SS Supporting table Specification:top 18g and shelf 22g,leg 40x40 18g ss pipe,Adjustable PVC Bullet 40x40,SS Grade 304, Size- 72"x30"x32"+1U/S with all accessories - 01 Nos. (p) SS Supporting table Specification:top 18g and shelf 22g,leg 40x40 18g ss pipe,Adjustable PVC Bullet 40x40,SS Grade 304, Size-72"x30"x32"+1U/S with all accessories 01 Nos. (q) Three Sink Unit Specification:Top 18g ,leg 40x40 18g ss pipe Adjustable PVC Bullet 40x40,SS Grade 304, Size-66"x24"x32"+6" with all accessories 01 Nos. (r) Dish Landing Table Specification:Top 18g ,Shelf 22 g ,leg 40x40 18g ss pipe Adjustable PVC Bullet 40x40,SS Grade 304, Size-36"x24"x32" with all accessories 01 Nos. (s) Pot Rack (4Shelf) Specification:,Pipe 40x40 18g , pipe 20 round 18 g,ss pipe Adjustable PVC Bullet 40x40,SS Grade 304, Size-36"x18"x60" with all accessories 01 Nos.

Item No. 1.089 Contd.... (t) Dish Rack (4 Shelf) Specification: side and shelf 22g,leg 40x40 18g ss pipe Adjustable PVC Bullet 40x40,SS Grade 304, Size-36"x18"x60" with all accessories 02 Nos. (u) Indian Dough Kneader SS Kneading Bowl (40 Kg) with all accessories 01 Nos. (v) Potato Piller (20 Kg) with all accessories 01 Nos. (w) Onion Potato Rack ss , Size-36"x24"x40" with all accessories 01 Nos. (x) Dry Store SS Rack Specification: side and shelf 22g,leg 40x40 18g ss pipe Adjustable PVC Bullet 40x40,SS Grade 304, Size-36"x18"x60" with all accessories 05 Nos. (y) Walk In Chiller Specification 8'X10' x8',SS Grade 304 (trufrost) with all accessories 01 Nos. (z) Walk in Chiller SS Rack Specification: side and shelf 22g,leg 40x40 18g ss pipe Adjustable PVC Bullet 40x40, Size-45"x18"x60" with all accessories 04 Nos.

(Sch A Part-II): -

Taking down carefully existing point wiring of any type (i.e on wooden batten, surface conduit, casing capping or concealed conduit except existing conduit) complete for light, fan, socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawal plug, screw etc including removing materials from site for taking credit of unserviceable items and re-fixing the serviceable items as per schedule and making good disturbed surface of walls, floors etc, complete all as specified and directed.

M&L point wiring with 1.5 sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLSH cable, IS-694 marked, drawn through existing metallic/ rigid PVC concealed conduit including replacement of pressed steel terminal mounting box , for mounting fitting like modular switches, sockets, and fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm size copper conductor cable green in colour as a earth wire and connected to common earth dolly for one Fan point/ exhaust fan point / one light point / bell/ buzzer controlled by one switch/ bell push, complete all as specified and directed.

M&L point wiring with 1.5 sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLSH cable, IS-694 marked, drawn through existing metallic/ rigid PVC concealed conduit including replacement of pressed steel terminal mounting box , for mounting fitting like modular switches, sockets, and fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm size copper conductor cable green in colour as a earth wire and connected to common earth dolly for One socket outet point 5 amps on the same board, complete all as specified and directed.

M&L point wiring with 1.5 sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLSH cable, IS-694 marked, drawn through existing metallic/ rigid PVC concealed conduit including replacement of pressed steel terminal mounting box , for mounting fitting like modular switches, sockets, and fixed with brass screws and cup washers including one continuous run of PVC insulated 1.50 sqmm size copper conductor cable green in colour as a earth wire and connected to common earth dolly for One socket outet point 5 amps on the independent board, complete all as specified and directed.

M&L wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

S&F modular metal flush box 1/2 module complete all as specified and directed.

S&F modular metal flush box 3 module complete all as specified and directed.

S&F modular metal flush box 4 module complete all as specified and directed.

S&F modular metal flush box 6 module complete all as specified and directed.

S&F modular metal flush box 8 module complete all as specified and directed.

S&F modular metal flush box 12 module complete all as specified and directed.

S&F modular white cover plate with frame, 1 module complete all as specified and directed.

S&F modular white cover plate with frame, 2 module complete all as specified and directed.

S&F modular white cover plate with frame, 3 module complete all as specified and directed.

S&F modular white cover plate with frame, 4 module complete all as specified and directed.

S&F modular white cover plate with frame, 6 module complete all as specified and directed.

S&F modular white cover plate with frame, 8 module complete all as specified and directed.

S&F modular white cover plate with frame, 12 module complete all as specified and directed.

S&F modular Dummy plate complete all as specified and directed.

S&F Modular switch 6 Amp 1 way 1 module size complete all as specified and directed.

S&F Modular switch 16 Amp 1 way with indicator 1 module size complete all as specified and directed.

S&F Modular socket shuttered 6 Amp 2/3 pin combined 2 module size complete all as specified and directed.

S&F Modular socket 16Amp multipurpose type 2 module size complete all as specified and directed.

S&F Modular Fan regulator step type 120 watts 2 Module size complete all as specified and directed.

S&F Ceiling rose, surface bakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thick bakelite, laminated hylem sheet of appropriate size, complete all as specified and directed.

S&F in repair of 20A starter switch for AC including necessary connection complete all as specified and directed.

M&L sub main wiring with 1100 volt grade four single core FRLSH Wire PVC insulated and unsheathed cable with stranded copper conductor 6.0 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 6.0 sqmm multi - stranded copper conductor as earth wire in green colour, including taking down old unserviceable sub main wiring complete all as specified and directed. [NOTE: Four runs of 6.0 sqmm PVC FRLSH multi stranded copper cable wire and Two run of 6.0 sqmm PVC FRLSH multi stranded copper cable earth wire and One run (01 meter) PVC conduit of suitable size ISI mark will be measured and one unit length.]

M&L sub main wiring with 1100 volt grade two single core FRLSH Wire PVC insulated and unsheathed cable with stranded copper conductor 4.0 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 4.0 sqmm multi - stranded copper conductor as earth wire in green colour, including taking down old unserviceable sub main wiring complete all as specified and directed (For AC & Geyser) [NOTE: Two runs of 4.0 sqmm PVC FRLSH multi stranded copper cable wire and One run of 4.0 sqmm PVC FRLSH multi stranded copper cable earth wire and One run (01 meter) PVC conduit of suitable size ISI mark will be measured and one unit length.]

S&F LED Decorative recess mounted light 1x 20 W LED with driver , holder including conneting complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: LERS02R020XW or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED 8 Watt tiltable cob down light with anti glare rose gold reflector LED with driver, conneting complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: LEMAT1R08XW or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED Decorative deep recess mounted light 1x 15 W LED with driver , holder including conneting complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: LSTADR1R15XW or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED Decorative circular ring light 36 watt, 600 mm dia ring surface mounted light with driver black body,holder including conneting complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: FPF-BLK-PRRH36WD600H60AO or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED Dotless cob Strip light 8Watt/M with driver,conneting complete all accessories and connection with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: LSTPCOB008XW or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED Driver 60 Watt complete all as specified and directed. [Make : Jaguar cat Ref: LDRVO1S060XX or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED Decorative wall lamp 1x 10 W LED with driver , holder including LED conneting complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as specified and directed. [Make :Jaguar cat Ref: MB160275211A or similar in make as mentioned in the list of makes in Particular Specifications]

S&F floor lamp with black shade, holder including LED bulb conneting complete all accessories and connection with conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: FL12021192B or similar in make as mentioned in the list of makes in Particular Specifications]

S&F Table lamp with,holder including LED bulb conneting complete all accessories and connection with conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: TL1300H or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED Orelli ultra slim 7 Watt LED spot light with suitable driver conneting complete all accessories and connection with conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: CCL-BLK-LORLUS1R07XW or similar in make as mentioned in the list of makes in Particular Specifications]

Supply, install & testing of ultraslim 10 watt LED sufrace/hanging mounted complete all as specified and directed. [Make : Jaguar Cat part No: CCL-BLK-LINRUSFL10W or similar in make as mentioned in the list of makes in Particular Specifications]

Supply, install & testing of Magnetic track slim 2mtr sufrace/hanging mounted(ultraslim track) complete all as specified and directed. [Make : Jaguar Cat part No: API-BLK-LTRKUSM2MTRXS or similar in make as mentioned in the list of makes in Particular Specifications]

Supply, install & testing of Magnetic track slim 1mtr sufrace/hanging mounted(ultraslim track) complete all as specified and directed. [Make : Jaguar Cat part No: API-BLK-LTRKUSM1MTRXS or similar in make as mentioned in the list of makes in Particular Specifications]

S&F hanging wire for surface mounted magnetic track (ultraslim track) complete all as specified and directed. [Make : Jaguar Cat part No: ACI-BLK-HANGWIREMAGT or similar in make as mentioned in the list of makes in Particular Specifications]

S&F L connector for surface mounted magnetic track (ultraslim track) complete all as specified and directed. [Make : Jaguar Cat part No: ACI-BLK-LTRCMUSLSHPS or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED Driver 48V 200 Watt for Led magnetic track complete all as specified and directed. [Make : Jaguar cat Ref: ZCI-BLK-LDRVMU48V200W or similar in make as mentioned in the list of makes in Particular Specifications]

S&F I shape magnetic track (ultraslim track) complete all as specified and directed. [Make : Jaguar Cat part No: ACI-BLK-LTRCMUSISHPS or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED Decorative circular ring profile light 36 watt, 1200 mm dia ring, surface mounted light with driver, white body,conneting complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as directed. [Make : Jaguar cat Ref: FPF-WHT-PRDH72WWWD04FTED or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED Decorative gold finish mini chandellier, Suitable driver, holder, bulb and conneting complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed. [Make : Jaguar cat Ref: DCO-GLD-AS8051B or similar in make as mentioned in the list of makes in Particular Specifications]

S&F Decorative ultra slim square profile LED lighting fixture with LED pride box type fitting essential Batten 20W tubelight 6000K/3000K complete all as specified and directed. [Make : Jaguar cat Ref: LPRD01X020XW or similar in make as mentioned in the list of makes in Particular Specifications]

S&F decorative hanging pendent light 1LT aluminium globe shape with copper finish 1x10W with holder bulb, conneting complete all accessories and connection with conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: DPN-BLK-SLPEA089AE27 or similar in make as mentioned in the list of makes in Particular Specifications]

S&F decorative hanging pendent light globe shape with 1x10W with holder bulb, conneting complete all accessories and connection with conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: DPN-AMB-SLGLS250E27 or similar in make as mentioned in the list of makes in Particular Specifications]

S&F die cast aluminium housing transperant tempered glass diffuser matt grey finish 90V-260V AC landscaping outdoor spike lights 4 Watt,conneting complete all accessories and connection with conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: OSK-BLK-LSPK03R104XW or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED Decorative recess mounted spot light for artifacts 2 W LED with driver, conneting complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: HCO-WHT-LJPM01R002XW or similar in make as mentioned in the list of makes in Particular Specifications]

S&F die cast aluminium housing transperant tempered glass diffuser matt grey finish 90V-260V AC landscaping outdoor spike lights 8 Watt,conneting complete all accessories and connection with conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: OSK-BLK-LSPK04R108XW or similar in make as mentioned in the list of makes in Particular Specifications]

S&F in repair LED Bollard light disc of 10W Resistant to impact and corrosion Glare free and better uniformity, suitable driver, holder and bulb complete with all accessories complete all as specified and directed. [Make : Jaguar Cat No. LBLDDSC010XW or similar in make as mentioned in the list of makes in Particular Specifications]

S&F decorative outdoor facade window light with driver conneting complete all accessories and connection with conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: FWI-GRY-FLWNDL06WW5180A0 or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED flex light-12W/M-5 meter roll with driver,conneting complete all accessories and connection with twin core twisted flexible copper conductor cable with suitable size and earthing, complete all as specified and directed. [Make : Jaguar cat Ref: FFX-WHT-FLNF12WWTB05MTDO or similar in make as mentioned in the list of makes in Particular Specifications]

S&F LED Driver 200 Watt complete all as specified and directed. [Make : Jaguar cat Ref: FLPSMWXLG200 or similar in make as mentioned in the list of makes in Particular Specifications]

Supply, install & testing of Aluminium channel for sufrace mounted outdoor façade cove light, complete all as specified and directed. [Make : Jaguar Cat part No: FLPRF1212AL1MTEF or similar in make as mentioned in the list of makes in Particular Specifications]

S&F in replacement of security light fitting LED 35 Watt with dusk and down sensor aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size GI Bracket and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting complete all as specified and as directed.

S&F in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 250mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose to exhaust fan including cutting hole suitable for fixing exhaust fan complete all as specified and directed.

S&F Noiseless ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor with remote, complete all as specified and directed.

S&F in repairs lED post top for 360 indirect light with IP65 protection. Resistant to impact and corrosion. Glare free and better uniformity complete connection from ceiling rose with twin core twisted flexible copper conductor with all accessories as per directed Cat No. or equivalent in complete all as specified and directed.

S&F MCB single pole, 240 volts, 6 to 32 Amp, rupturing capacity 10 kA, ‘C’ curve type complete all as specified and directed.

S & F MCB SPN, 240 volts, 32 Amp, rupturing capacity 10 kA, ‘C’ curve type complete all as specified and directed.

S & F MCB SPN, 240 volts, 40 to 63 Amp, rupturing capacity 10 kA, ‘C’ curve type complete all as specified and directed.

S & F sheet metal enclosure for DB’s (Double door type), single pole and neutral, 12 ways with 200 ampere rated bus bar, 240 volts fixed sunk / flush to the wall with IP-43 and IK-09 protection complete all as specified and directed.

S & F sheet metal enclosure for DB’s (Double door type), triple pole and neutral, 8 ways with 200 ampere rated bus bar, 415 volts fixed sunk / flush to the wall with IP-43 and IK-09 protection complete all as specified and directed.

S&F in repair epoxy powder coated sheet metal enclosure for DBs double door (when Mcbs to be used ) single pole and neutral 415 V (VTPN) 4 Ways with mounting fitted with bus bar DIN channel neutral link and incoming contract complete all as specified and directed.

S&F in MCCB 4 pole, 3 phase, 415 volt of capacity 125 Amp, 16 KA fixed thermal and magnetic setting, complete with proper copper thimbles, copper reducer etc complete all as specified and directed.

S&F commerical modular kitchen Undercounter Refrigerator with working Top Specification:top 18g and side 22g,leg 40x40 18g ss pipe Adjustable PVC Bullet 40x40, Compressor Make Emrsion, Motor 16 watt motor silent , Copper coiling , Puffed Body , Condesor Copper , 350 watt total,SS Grade 304, Size-60"x26"x32"+6" with all accessories complete all as specified and directed.

S&F commerical modular kitchen Single Deck Oven Specification Tray Size 24"x16", Size-3.2 kw, 220v, Tray Size 24"x16" Dimesions945x605x485 mm with all accessories complete all as specified and directed.

S&F commerical modular kitchen Sandwitch Griller Jumbo with all accessories complete all as specified and directed.

S&F commerical modular kitchen Deep fat fryer (10 litre) with all accessories complete all as specified and directed.

S&F commerical modular kitchen Four Door Refregerator (Deep) Specification:Top 18g and side 22g,leg 40x40 18g ss pipe,Adjustor 40x40 PVC,Compressor Make Emrsion, Motor 25 watt motor silent , Copper coiling , Puffed Body , Condesor Copper , 450 watt total, Tem - 15 C to 10 C,SS Grade 304, Size- 48"x30"x78" with all accessories complete all as specified and directed.

S&F commerical modular kitchen S.S Hood with SS Filter Specification: 22 g Sheet ,SS Grade 304, Length-10RM for Exahust And Fresh Air Gaspipe linewith all accessories complete all as specified and directed.

S&F commerical modular kitchen G.I Ducting Specification: 40 and 50 sheets (Appx - 178 Sqm) for Exahust And Fresh Air Gaspipe linewith all accessories complete all as specified and directed.

S&F commerical modular kitchen Air Scrubber 8000cfm Specification: 10 hp , 3 phase, (38 per CFM) for Exahust And Fresh Air Gaspipe linewith all accessories complete all as specified and directed.

S&F commerical modular kitchen Air Washer 10000cfm Specification: 7.5 hp , 3 phase, (39 per CFM) for Exahust And Fresh Air Gaspipe linewith all accessories complete all as specified and directed.

S&F commerical modular kitchen Fresh Air Fillter with Damper Specification: Powed coating GI for Exahust And Fresh Air Gaspipe linewith all accessories complete all as specified and directed.

S&F commerical modular kitchen Canvas cloth for Exahust And Fresh Air Gaspipe linewith all accessories complete all as specified and directed.

S&F commerical modular kitchen Gas Pipe Line With 6 Manifold Gas pipeline with manifold and all essential fiitings like Pressure Gauge, Pressure Regulator , BPT pipe 5' as per requirement , CPT pipe 3' , pressure adaptor, NCV , NRV etc, Size-1" to 1/2" Seamless Pipe 4.5 mm thickness, Manifold pipe 1" 4.5 mm thickness,46 Running Mtr for Exahust And Fresh Air Gaspipe linewith all accessories complete all as specified and directed.

S&F commerical modular kitchen Fire arrestor and by pass system for Exahust And Fresh Air Gaspipe linewith all accessories complete all as specified and directed.

S&F BEE 5 star rated storage electric water heater (Geyser), flexible mounting of capacity 25 ltrs, single phase, 240 volts, AC, white colour, 50Hz, as per IS-2082:1993 having 2 KW incoloy glass coated heating element with ABS shock proof and rust proof body, SS tank with glass coating from inside suitable for 8 bar pressure, class-I, Vertical type, complete with high precision & externally adustable capillary thermostat for temp regulation, backup safety overheating capillary therrmal cut out at 95ºC, temperature display/control knob, PUF insulation water proof technology with FRLSH grade electric cable of suitable size ISI marked with ISI marked plug top 240V, 16 Amps with Magnesium anode, standing loss shall not exceed 0.562 KW/14 hrs. including 4 in 1 multifunction valve etc., including provn of suitable holding clamp, MS bolts, grouted to wall and connecting up including 3 core sheathed multi-stranded flexible copper conductor cable connected and provn of water connections with new PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers union, NRV of suitable size, check/end nuts with washers, 15mm dia 100mm long nipples (02 Nos) for hot water and cold water connections and making good to the disturbed surface in cement morter as required and testing including taking down of old unserviceable one and deposit to the store, complete all as specified and directed.

Item No. 2.83 Contd.... NOTE: Cost of flexible copper cable of 3 core, PVC steel braided inlet/outlet pipe of 15mm dia, 450mm long with brass union, NRV, check/end nuts, nipples, MS bolts, etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of geyser will be deemed to be included in the quoted rate

M & L earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed.

Item No. 2.85 Contd.... [Note: - (i) Earth lead and protection pipe beyond 7.5 m shall be measured and Paid separately. (ii) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt.]

Taking down celling fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35sqmm x 4 core laying properly in trench including dismantling of old unserviceable one, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil complete all as specified and directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and directed. [Note : Punned thickness shall be measured]

M&L sub class B fly ash bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.

S&F GI Light grade 40 mm dia of size for road cross/cutting on wall floor drain etc., complete all as specified and directed.

NEELAM DINESH CONSTRUCTION CO (BID ID -3488026)