Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L1₹1.5 LRejected-AOC | L1 | Rejected-AOC L1 |
Tender Value
Refer Docs
EMD Value
₹2,960
Closing Date
16 Feb 2023, 12:00 pmClosed
Executive Engineer
Lucknow division Sharda Canal Lucknow
Wooden Polishing work at 2nd floor LHS of Dr. Ram Manohar Lohiya Parikalp Bhawan Telibagh Lucknow. (Lot-9)
2023_UPIDC_774016_9
04/AEIV/2022-23
Open Tender
Civil Works
Item Rate
15 days
parikalp Bhawan
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
₹2,960
27 May 2023
11 Feb 2023
16 Feb 2023
11 Feb 2023
16 Feb 2023
11 Feb 2023
11 Feb 2023 - 16 Feb 2023
Amount
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:
The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.
Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.
On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.
On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)
M/S Divyansh Traders
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .