PROVN OF WALL AND FLOOR TILING INCL KOTA STONE FLOORING AND WESTERN STYLE WC IN WASHROOM AT VAJRA ARMY PRE-PRIMARY SCHOOL S AND T LINES AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed at a level n.exc 1.5m above the starting point complete all as specified and directed

Roughening surface of old concrete floor or wall by picking, sweeping clean and washing down with water or remove dust including brushing neat cement slurry with 3.0 Kg/ Sqm of cement etc complete all as specified and directed

Material and labour for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.18 Sqm but not exceeding 0.38 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

All as per item No 6.00 here-in-before but in skirting/ dado laid over and including 10mm thick rendering in cement mortar (1:4) as backing coat.

Material and labour for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified and directed.

Material and labour 20-25mm thick machine cut Kota stone slabs 550mm x 550mm as in flooring, jointed with grey cement mixed with pigment to match the shade of the slab including grinding, rubbing and polishing to mirror finish with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes including neat cement slurry with 3 Kg/Sqm complete all as specified and directed

All as per item No 9.00 here-in-before but as in skirting laid over and including 10mm thick rendering in cement mortar (1:4) as backing coat.

Supply and fixing in repairs Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern) including seat cover and flushing pipe for pedestal pipe etc. complete all as specified and directed

Supply and fixing PVC connection fiber, reinforced 45 cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed.

Supply and fixing in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.

Supply and fixing angle/ stop valve 15mm nominal bore, cast copper fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, fixed in repairs complete all as specified and directed.

Supply and fixing chromium plated brass jet including PVC pipe connection fixed to EWC complete all as specified and directed

Supply and fixing CP grating 125mm dia with centre hole all as specified and directed.

Taking up or down 15mm bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Material and labour for galvanised steel tubes 15mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. complete all as specified and directed.

Material and labour for galvanised steel tubes 20mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. complete all as specified and directed.

Supply and fixing in repairs 15mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

Supply and fixing 20mm bore stop cock brass cast copper with butter fly handle, screwed down, high pressure for iron pipes or for unions fixed in repair complete all as specified and directed.

Supply and fixing in repair health faucet (ABS body) mild steel chromium plated suitable for 15mmdia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all l as specified and directed

Material and labour for 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement fixed including taking out damaged floor trap in any type and position complete all as specified and directed.

Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 110 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 75 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 75mm bore complete all as specified and directed.

Material and labour for complete removal of the existing treatment on walls for preparation of wall surfaces by scrapping (any No of layers), rubbing down, washing, etc as directed and applying a uniform layer of wall care putty as approved after the let the surface dry then applying two coats of oil bound distemper white or tinted over a coat of primer all as specified and directed

Material and labour for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub floors, sub base, hard standing, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified & directed.

Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed.

Material and labour for 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over complete all as specified and directed. Note : The sample shall be got approved from the GE before build procurement and lots shall be got tested independently by the GE.

Material and labour PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed. Note : Reinforced if any used in subject item shall be measured and paid separately.

Material and labour for pre-cast cement concrete block (1:2:4) type B-1 (using 20mm graded stone aggregate) as in masonry with solid blocks, exc 10cm in width and setting cement mortar 1:6 complete all as specified and directed.

Material and labour for sand cushioning with layer of fine sand 25mm thick over PCC for laying of interlocking paver block all as specified and directed

Material and labour for 30mm sand cushion, filling 30mm under floors or in foundations including watering and consolidation complete all as specified and directed

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

Removing excavated material (soils) to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material and labour for hardcore of broken stone or boulders of gauge n.exc. 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out in any type of soil returning, filling in and ramming earth in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation filling, post holes, mass concrete, surface channels, drains and other similar works complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling, post holes, mass concrete complete all as specified and directed.

Material and labour for rolled sections Fe 410-W (Gde-E-250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and connecting plates guides for sliding doors; fixed with angle cleats or other running rails complete all as specified and directed

Material and labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick complete all as specified and directed.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for 75mm thick PCC 1:2:4 type B-1 (using 20mm crushed stone aggregate) as in floors and like finished even and smooth without using extra cement complete all as specified and directed

Surface dressing not exceeding 15cm deep in soft/ loose soil including removing bushes/ small trees etc complete all as specified and directed

Excavation in trenches in soft /loose soil, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sqm on plan and getting out complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25 cm thick each layer complete all as specified and directed.

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:4) complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls in CM (1:4) complete all as specified

Material and labour for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete (1:2:4) type B-0 complete all as specified and directed

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200mm thick (Horizontal or sloping) for flat & rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs etc also splays between floors and beams Complete all as specified.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular in rough finished surfaces of concrete complete all as specified

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

All as per Srl item No 62.00 here-in-before but 8mm dia as in stirups, spacers and binders

Material and labour mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Material and labour for RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, mass concrete and bases for columns etc complete all as specified and directed.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on wall, beams and column in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in chajjas, parapet, facia etc. complete all as specified and directed.

Material and labour RCC M-25 (Design mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m span complete all as specified and directed.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

Material and labour for rendering 10mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

Material and labour for 5mm thick rendering in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound all as specified and directed.

Material and labour for preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of newly plastered or un-plastered surface of walls including cornices, plasters etc. and applying two coats of cement base paint over a coat of primer coat complete all as specified and directed.

Material and labour for approved earth filling including spread and levelled in layers not exc 25 mm thick watering and rammed to a true surface complete all as specified.

Material and labour for 25mm thick cement concrete (1:2:4) type B-1 using 20mm graded aggregate and finishing the surface fair and even to receive the top layer of tiles complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles of size 300 x 300x 7 to 8mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Supply and fixing PVC (SWR) vent cowl 110mm bore all as specified and directed.

Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing pipe complete including breaking up existing damaged WC seat and make good to floor complete all as specified and directed.

Supply and fixing vitreous china wash hand basin, white, flat back size 550 x 400mm including one number brass CP waste coupling, 32mm dia, 32mm dia PVC waste pipe with connector, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fixing vitreous china bowl urinal, full stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including and fixing of flush pipe, grating with waste coupling and union for discharge pipe, waste pipe, spreader etc, complete all as specified and directed.

Supply and fixing pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fixing soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed

Material and labour ball valve brass high pressure with polythene float and fly nut complete screwed for 15mm bore dia of iron pipe or brass ferrule and fixed complete all as specified and directed

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing extruded aluminium alloy handles, fabricated type, anodised, 150mm size, all as specified and directed.

Supply and fixing 150mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two No sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four No for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 No per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 No per leaf (c) MS tower bolt 150mm long- 2 No per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (e) MS pintal hinges of size 75mmx12mm- 2 No per leaf (f) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Grills/ guard bars, glass, wire mesh and painted shall be measured and paid separately under respective item of this BOQ.

All as per ser item No. 96.00 here-in-before but gauged shutters without sash bars.

Material and labour for 3mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.

Material and labour for mild steel sliding door bolts 250mm long plate type stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to made surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ micro-concrete/ general purpose grout as recommended proportionally as per recommendation of manufacturer. Making of goll as at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight all as specified and directed

Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/ brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin : Harder) application with 100% water dilution and pure polyurethane application in 2 coats with a total min consumption of 1.25 Kg/Sqm all as specified and directed. Note : Application should be done with Graco sprayer by a company authorised applicator.

Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore pipe complete all as specified and directed.

Material and labour for reinforced concrete pipes 150mm bore, class NP3, laid and jointed complete with collars complete all as specified and directed.

Material and labour for providing precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chaajas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 complete all as specified and directed

Supply and laying pipe galvanized, ‘medium class’, including reqd fittings 25mm (1.0”) dia laid in trenches, floor and fixed to wall complete all as specified and directed

Supply and laying pipe galvanized, ‘medium class’, including reqd fittings 20mm (3/4”) dia laid in trenches, floor and fixed to wall complete all as specified and directed

Supply and fixing 25mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified

Cutting existing GI pipe of size 25 to 32mm dia in position at two sections for taking new connection including marking thread on pipe in position, inserting new Tee, Union, Nipple provision and fixing of union complete jointing the cut pipe all as specified and directed

Material and labour for point wiring with 1.5 sqmm (nominal area), 1100 volt grade FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in and including sunken pressed steel boxes duly painted with anti corrosive paint over a coat of red oxide primer with plastic laminated Bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with cup washers etc including FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble for one light/ fan point controlled by one switch complete all as specified and as directed.

All as per Srl item No. 109.00 here-in-before but for one socket outlet 5 Amps on same board with other switches.

Supply and fixing switch piano flush type, 6 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing socket out let 6 Amp, 5 pin flush type complete all as specified and directed.

Supply and fixing batton holder ISI marked insulated body with matching colour back plate complete all as specified and directed.

Supply and fixing in replacement LED retrofit lamp 9W, 6500K, 220-240V, B-22 base cap complete all as specified and directed.

Supply and fixing ceiling rose surface type PVC/ polycarbonate 65 x 50mm three terminal complete all as specified and directed.

Material and labour for sheet metal enclosure DBs when MCBs to be used, SPN 6 ways 240 V, with copper bus bar, double door, epoxy/ powder coated inside and outside with earth bar and neutral bar, prewired complete all as specified. Make : EKINOX3 series of Legrand/ Acti 9 metalic series of Schneider/ Optipro of Indoasian/ Osafe of HPL/ Metallica of Havells/ Siemens/ Hager/ L&T.

Supply and fixing MCB SP 6 to 32 Amps, 10 KA, B curve confirming to Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Hager/ L&T/ Siemens complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair MCB SPN 32 Amps, 10 KA, B curve confirming to Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Hager/ L&T/ Siemens complete all as specified and directed by Engineer-in-Charge

Supply and fixing LED lights fitting 1 x 20 watt, 220V, AC box type with driver, holder including LED tube rod 20 watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

Supply and fixing exhaust fan steel body AC single phase 230V of size 300mm sweep with, blades and frame and louvers complete all as specified and directed

Material and labour for cutting hole of exhaust fan 300mm sweep and repair the wall with necessary cement work, plastering to make required the disturbed surface to match with existing specifications all as directed

Supply and fixing in repair energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 25 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-65 protection, surge protection operative on AC supply 140 volts to 270 volts pre-wired complete with GI pipe of suitable size boer and MS clamps duly painted with two coats paint all as specified and directed

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved all as specified and directed and testing on completion. Note : PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner

Material and labour for XLPE insulated, PVC sheathed, galvanized steel strip or wire armoured, electric power cables ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm 2 core laid in trenches/ culverts/ under roads through pipes complete all as specified and directed

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-Charge.

Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches, punned down to thickness of 18cm complete all as specified. Note : Punned down thickness of 18cm will be measured for payment to contractor.

Supply and fixing galvanised pipe light grade of ISI marked 32mm bore for cable protection under road/ floor/ wall along the pole including fiting complete all as specified and directed

NIRMAL SINGH

NATIONAL BUILDERS

S S CONSTRUCTION

G S TRADERS

M/S RAJESH CONSTRUCTION COMPANY