C/o Mahasheer Hatchery-cum-carp Breeding Unit at Vill. Nagar in Sunni Distt. Shimla (HP). (SH- Balance work)(building portion, boundary wall and laying of pipeline).

Amount

Excavation in foundation, trenches etc. in earth work in all kind of soil lifts. Stacking the excavated soil not more than 3mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating of all surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed and disposing at dumping site (To be arranged by the contractor) including payment of MC/ local body dumping charges it lived any as per satisfaction of Engineer-in-charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used/ removed as per the direction of Engineer-in-charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Providing and laying cement concrete 1:6:12 (1cement:6sand:12graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in foundation and plinth including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:-a) Columns, pilasrs, post and struts, square, rectangular or polygonal in plain including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

b) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

c) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness.

d) Vertical surfacessuch as walls.

Providing & laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all height.(a) Columns, pilasrs, posts and struts, square, rectangular or polygonal in plain including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

b) Suspending floors roofs landing & shelves and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level.

Providing tor steel reinforcement for RCC work including bending, binding and placing in postion complete upto floor two level including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clearstory windows including black enamelled iron butt hinges with necessary screws. 35mm thick 2nd. Class Deodar Wood including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

P/F wire gauge shutters using galvanised M.S. Wire gauge of I.S. Gauge designation 85 G with wire of dia.0.56mm for doors,windows & clerestorey windows i/c bright finished black enamelled iron hinges with necessary screws.30mm thick 2nd class deodar wood including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Providing and fixing anodized aluminium sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. (a) 250mm x 16mm.

Providing and fixing aluminium tower bolts (barrel type ) anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete. a)200x10mm.

Providing and fixing aluminium handle anodized transparent or dyed to required colour and shade with nacessry screws etc. complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. (a)125mm.

Brick work using common clay burnt building bricks inFoundation and plinth in cement mortar 1:4 (1cement: 4 sand) 1st class bricks upto all height including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Half brick thick Honey comb brick work with common burnt clay building bricks in cement mortar 1:4(1cement:4 sand) 1st class bricks

Half brick masonry in comman burnt clay building bricks in superstructure avobe plinth level upto floor two level with cement mortar 1:4(1cement:4 sand) 1st class bricks including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

6mm cement plaster in ceiling with cement mortar 1:4(1cement:4 sand) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

15mm cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Providing and laying spartic ceremic tiles 5.5mm thick in flooring 300x300mm size on treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cement including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

White glazed tile 6mm thick in skirting risers of steps and dado 12mm tick cement mortar 1:3(1cement: 3sand) and jointed with cement slurry. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing & laying vetrified tiles (600x600mm x 10mm) in grey coloured or of approved shade in flooring treads steps and landing laid on a bed of 12mm thick cement mortar 1:3(cement :3sand) laid over and jointed with neat cement slurry. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Kota stone slab flooring 20 mm ( average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. 25mm thick

P/L marble work (Table rubbed & polished) in flooring 20mm thick base in Cement Mortar 1:3 (1 Cement : 3 Sand) i/c jointing with cement mortar 1:2 (1 White Cement : 2 Marble dust) with an admixture of pigment to match the shade of marble. 20mm thick. White makrana marble.Kitchen Shelves. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing M.S. grills of required patterns in woodan frames of windows etc. With M.S. flats, square or round bars with round headed bolts and nuts or by screws. Plain grill. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Steel work welded in built, up saction in trusses and framed work including cutting hosting fixed in position & applying a priming coat of red lead paint in :- a) In grating framed guard, bars ladders, railing, brackets and similar works. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying cement concrete 1:3:6 (1cement:3sand:16graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work in foundation and plinth. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing plinth protection under layer of 75mm thick bed of dry brick/stone aggregate 40mm nominal size well ramed and consolidated and ground with fine sand including prepration of ground finished with 50mm thick cement concrete 1:3:6 (1cement:3sand :6graded stone aggregate 20mm nominal size.) and fixing oxidized M.S hooks and eyes 150mm long.

Applying priming coat over new wood and wood based surface after and including prepairing the surface by thoroughly cleaning oil, dirt and other foreign matters sand papered knotting. Ready mixed pain brushing wood primer pink.

Painting two coat (excluding priming coat) on new wood and wood based surfaces with readymixd paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter sand pepering and stopping with ready mixed paint. (a) White paint.

Applying priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knotting Ready mixed pain brushing red oxide/zink oxide chrome.

Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white.

Applying birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete.

Distempering (two coats) with oil boud washable disremper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and menufacture after thoroughly brushing the surface free from mortar dropping and other forign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.

Finishing wall with Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Cement concrete flooring 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 40mm thick. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Applying cement slurry on Cement concrete work using 2.75kg of cement per sq. Meter of floor/wall including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete)

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Removal of slips in all kinds of soil (including saturated soil but excluding boulders and rocky portion requiring blasting upto a distance of 20 metres dosposing of un-serviceable materials upto all leads, stacking serviceable materials and neatly dressing the surface. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Supplying & fixing expended metal to steel members in partitions etc. weight not eceeding 3 Kg/Sqm including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing & fixing fly proof galvanised M.S. wire gauge of IS gauge designation 85 G with wire of dia. 0.56mm to windows and clerestory windows. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing & laying of boulder apron laid in wire crates with 4mm dia GI wire conforming to IS:4826 in 100mmx100mm mesh(woven diagonally) including 10per Cent extra for laps and joints laid with stone boulders weighing not less than 25kg each as per drawing and technical specifications clause 1301 including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing perpex sheet roofing fixed with G.I. or J and L hooks, bolts and nuts 8mm dia. Metre with bitumen & G.I. limpet washers filled with white lead complete excluding cost of purlins, rafters and trusses. 2mm Thick

Excavation in earth work and banking in 20cm layers i/c breaking clods, ramming/ rolling and dressing ground for the purpose of making embankments to filling up ground depressions upto all leads lifts for the impervious layer of clay soil. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing high pressure PVC pipe spigot and socket soils waste and ventilating pipes ISI marked i/c fixing with approved adhesive etc. complete.(a)150mm

P/f P.V.C. Fittings and accessories a) P/f PVC plain bend ISI marked including fixing with approved adhesives etc. Complete 150mm dia

b) P/f PVC plain bend ISI marked including fixing with approved adhesives etc. Complete 110mm dia

c) P/f PVC plain bend ISI marked including fixing with approved adhesives etc. Complete 75mm dia

d)P/f PVC Single equal branch including fixing with approved adhesives etc. complete 110mm

e)P/f PVC Single equal branch including fixing with approved adhesives etc. complete 75mm

Providing and fixing PVC clamps ISI marked of approved design with steel screws and raw plugs etc. complete. a)150mm

Providing and laying in trenches, galvanised mild steel tubes(medium grade), tube fittings (earth work in trenches to be measured and paid for seperately) 20mm nominal bore minimum weight 1.22 Kg/Rmt.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium Grade) tube fittings and clamps i/c making good the wall, ceiling and floor. 15mm nominal bore. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Making connection of galvanized mild steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and treading the pipes complete.

Providing & fixing pvc floor trap ISI marked of self cleaning design i/c fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110mm x 75mm.

P/F vitreous china wash down water closet (European type, W.C. Pan) with integral 'P'or 'S'trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement:1 Sand) (Seat and cover to be measured and paid seperately) Ordinary Closet. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PTMT Coloured/ white automatic flushing cistern with a pair of PVC/ C.I. or M.S. bracket complete with fittings i/c PVC syphonic appratus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet & over flow pipes i/c cutting holes and making good the same. 10.00 ltrs. net capacity

P/f plastic seat and cover for wash down water closet with CP brass hinges and rubber. Solid type white plastic seat and cover

Providing and fixing PTMT jet spray of approved quality and colouer with one metre tube.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. / MS brackets painted white i/c cutting holes and making good the same but excluding fitting. 610 x 460mm with bowl depth 200mm

Providing & fixing vitreous china wash basin with pair of hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 630 x450mm.

Providing & fixng CP Brass waste for wash basin or sink 32mm dia.

Providing & fixng PTMT waste coupling of approved quality and colour 32mm nominal bore.

Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap.

Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers.

Providing and fixing C.P. brass towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass screws. 600mm x 20mm.

Providing & fixing CP brass Pillar tap with capastan head 15mm dia.

Providing & fixing CP brass bib tap with capastan head 15mm dia.

P/F C.P. brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws.

P/F C.P. brass angle valve 15mm without Nuts and pipe.

P/F brass stop cocks:(a) 15mm dia

(b) 20mm dia

Providing & fixing PVC connection pipes with brass unions 45cm lenght 15mm nominal bore. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing G.I. or M.I. unions. 15mm dia. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PVC water storage tank G.I. Inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement i/c hoisting upto all heights above ground level: 1000 ltrs. net Capacity tank including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Constructing manhole with RCC top slab in 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1cement: 4sand: 8graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement: 3sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) finished smooth complete including curing complete and testing. Inside size 800 x 800mm and 500mm deep including RCC cover and frame medium duty 500mm internal dia with 200mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1cement: 3sand) complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..

Providing, layiing, jointing and testing galvanised mild steel tubes (medium grade) pipe i/c flanges wherever necessary having wall thickness 4.8mm conforming to IS:1239 i/c the cost of bends and anticorossive treatment complete in all respect. Earthwork in trenches to be paid and measured seperately.150 mm nominal bore. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work Exposed on wall 20 mm nominal outer dia Pipes including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing & Laying in trenches HDPE pipes conforming to IS:4985-1968 complete with fittings (Earth work in trenches to be measured & paid for separately) within all leads & lifts. Grade PE 80, Pressure Rating NP- 4, SDR 26. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

VANSHIKA ARJUN CONSTRUCTION PRIVATE LIMITED

Abhishek Gupta

NARENDER SHARMA