Construction of One Additional floor on existing Girls Hostel -7 at NALSAR Campus, Hyderabad

1 Demolishing of RCC work and disposal of unserviceable materials within 100 metres 26.00 Cum 2,822.00 1 Cum 73,372.00

lead, including all incidental, labour charges, overheads and contractors profit, etc.

complete for finished item of work.

2 Demolishing of Brick work and disposal of unserviceable materials within 100 metres 34.00 Cum 267.00 1 Cum 9,078.00

lead, including all incidental, labour charges, overheads and contractors profit, etc.

complete for finished item of work.

3 Delifting of dismantled debris from Sixth floor to ground floor of Boys Hostel 7 / Girls 60.00 Cum 206.00 1 Cum 12,360.00

Hostel 7 manually using headload including all incidental, labour charges, overheads

and contractors profit, etc., complete for finished item of work.

4 Disposal of un-useful material to an average distance of 5 KM using mechanical means 60.00 Cum 117.00 1 Cum 7,020.00

for disposal as per the instruction of the Engineer-in-charge including cost and

conveyance of all materials, all operational, incidental labour charges and overheads &

contractors profit complete for finished item of work.

5 Supply and placing of Design Mix Concrete M25 grade corresponding to IS 456 with

minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER /

MIXER with 20mm size graded machine crushed hard Granite metal (coarse

aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm ,

15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance

of all materials like cement, fine aggregate (sand) (with 50% river sand & 50%

manufactured sand) coarse aggregate, water etc., to site, centering using Steel

scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc,

etc., including all operational, incidental and labour charges such as weigh batching,

machine mixing, laying concrete, curing and cost of overheads & contractors profit

etc.,complete but excluding cost of steel and its fabrication charges for finished item of

work (APSS No. 402) FOR

Sixth Floor Columns 57.00 Cum 18,750.00 1 Cum 10,68,750.00

Seventh Floor Columns 6.00 Cum 19,599.00 1 Cum 1,17,594.00

6 Supply and placing of Design Mix Concrete M25 grade corresponding to IS 456 with

minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER /

MIXER with 20mm size graded machine crushed hard Granite metal (coarse

aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm ,

15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance

of all materials like cement, fine aggregate (sand) (with 50% river sand & 50%

manufactured sand) coarse aggregate, water etc., to site, centering using Steel

scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc,

etc., including all operational, incidental and labour charges such as weigh batching,

machine mixing, laying concrete, curing and cost of overheads & contractors profit

etc.,complete but excluding cost of steel and its fabrication charges for finished item of

work (APSS No. 402) FOR

Sixth Floor Roof Beams 126.00 Cum 15,836.00 1 Cum 19,95,336.00

Seventh Floor Roof Beams 8.00 Cum 16,368.00 1 Cum 1,30,944.00

7 Supply and placing of Design Mix Concrete M25 grade corresponding to IS 456 with

minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER /

MIXER with 20mm size graded machine crushed hard Granite metal (coarse

aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm ,

15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance

of all materials like cement, fine aggregate (sand) (with 50% river sand & 50%

manufactured sand) coarse aggregate, water etc., to site, centering using Steel

scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc,

etc., including all operational, incidental and labour charges such as weigh batching,

machine mixing, laying concrete, curing and cost of overheads & contractors profit

etc.,complete but excluding cost of steel and its fabrication charges for finished item of

work (APSS No. 402) FOR

Sixth Floor Roof Slab 100mm Thick 1,235.00 Sqm 1,687.00 1 Sqm 20,83,445.00

Seventh Floor Roof Slab 100mm Thick 52.00 Sqm 1,744.00 1 Sqm 90,688.00

NBCC 1 of 10 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Civil Works

S.No. Item Description Quantity Units Rate per Unit Amount

8 Supply and placing of Design Mix Concrete M25 grade corresponding to IS 456 with

minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER /

MIXER with 20mm size graded machine crushed hard Granite metal (coarse

aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm ,

15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance

of all materials like cement, fine aggregate (sand) (with 50% river sand & 50%

manufactured sand) coarse aggregate, water etc., to site, centering using Steel

scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc,

etc., including all operational, incidental and labour charges such as weigh batching,

machine mixing, laying concrete, curing and cost of overheads & contractors profit

etc.,complete but excluding cost of steel and its fabrication charges for finished item of

work (APSS No. 402) FOR

Sixth Floor Waist Slab 175mm Thick 37.00 Sqm 2,322.00 1 Sqm 85,914.00

9 Supply and placing of Design Mix Concrete M25 grade corresponding to IS 456 with

minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER /

MIXER with 20mm size graded machine crushed hard Granite metal (coarse

aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm ,

15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance

of all materials like cement, fine aggregate (sand) (with 50% river sand & 50%

manufactured sand) coarse aggregate, water etc., to site, centering using Steel

scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc,

etc., including all operational, incidental and labour charges such as weigh batching,

machine mixing, laying concrete, curing and cost of overheads & contractors profit

etc.,complete but excluding cost of steel and its fabrication charges for finished item of

work (APSS No. 402) FOR

Sixth Floor Lintels 13.00 Cum 18,369.00 1 Cum 2,38,797.00

Seventh Floor Lintels 1.00 Cum 19,120.00 1 Cum 19,120.00

10 Supply and placing of Design Mix Concrete M25 grade corresponding to IS 456 with

minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER /

MIXER with 20mm size graded machine crushed hard Granite metal (coarse

aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm ,

15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance

of all materials like cement, fine aggregate (sand) (with 50% river sand & 50%

manufactured sand) coarse aggregate, water etc., to site, centering using Steel

scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc,

etc., including all operational, incidental and labour charges such as weigh batching,

machine mixing, laying concrete, curing and cost of overheads & contractors profit

etc.,complete but excluding cost of steel and its fabrication charges for finished item of

work (APSS No. 402) FOR

Sixth Floor RCC Platforms 75mm Thick 50.00 Sqm 1,047.00 1 Sqm 52,350.00

11 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with

minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER /

MIXER with 20mm size graded machine crushed hard Granite metal (coarse aggregate) (

consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm

and 10% of 6mm ) from approved quarry including cost and conveyance of all materials

like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand)

coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props,

wallers, Foot plates, brackets, steel Centering Plates, etc., for 60 cm wide sun-shades

7.5cm thick at fixed end and 5cm thick at free end with an average thickness of

6.25cm including all operational, incidental and labour charges such as weigh batching,

machine mixing, lifting concrete, laying concrete, curing, cost of overheads &

contractors profit complete etc., but excluding cost of steel and its fabrication charges

for finished item of work for sunshades (APSS No. 402, 403 & 903) & 903)

Sxith Floor 117.00 Sqm 1,455.00 1 Sqm 1,70,235.00

Seventh Floor 9.00 Sqm 1,509.00 1 Sqm 13,581.00

NBCC 2 of 10 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Civil Works

S.No. Item Description Quantity Units Rate per Unit Amount

12 Supply and fixing of pre cast RCC Racks (1:1:2) proportion nominal mix (cement: fine

aggregate: Coarse aggregate) using 6mm HGG chips, cement and sand for cupboard

racks and platforms as per the approved design including cost and conveyance of all

materials like cement, fine aggregate(sand) (50% river sand & 50% manufactured

sand), coarse aggregate, water etc. to site, including cost of centering charges and

shuttering machine mixing, laying concrete in position, curing, overheads and

contractors profit, etc., & lift charges for finished item of work. (APSS No. 402)

Sxith Floor 72.00 Sqm 985.00 1 Sqm 70,920.00

13 Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D

grade as per IS:1786 manufactured by Primary / Category-I producers like TATA, SAIL,

VSP, Jindal Panther, GOEL TMT, SHYAM STEEL and BALAJI SHAKTHI) of different

diameters for RCC works, including labour charges for straightening, cutting, bending to

required sizes and shapes, placing in position with cover blocks of approved materials

and size and tying and lap-splicing with binding wire, forming grills for reinforcement

work as per approved designs and drawings, including cost and conveyance of steel

bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars

including cost and conveyance of binding wire, cover blocks and all incidental,

operational, labour charges such as cutting, bending, placing in position, tying on all

materials etc. ,and cost of overheads & contractors profit etc., complete for finished

item of work ( APSS No.126)

Seventh Floor 4.00 MT 92,032.00 1 MT 3,68,128.00

14 Supply and placing of Design Mix Concrete M25 grade corresponding to IS 456 with

minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER /

MIXER with 20mm size graded machine crushed hard Granite metal (coarse

aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm ,

15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance

of all materials like cement, fine aggregate (sand) (with 50% river sand & 50%

manufactured sand) coarse aggregate, water etc., to site, centering using Steel

scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc,

etc., including all operational, incidental and labour charges such as weigh batching,

machine mixing, laying concrete, curing and cost of overheads & contractors profit

etc.,complete but excluding cost of steel and its fabrication charges for finished item of

work (APSS No. 402) FOR

Sixth Floor Steps 2.00 Cum 10,099.00 1 Cum 20,198.00

15 Providing and laying autoclaved aerated cement block masonry 200mm thick using

Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part- 3) - 1984

and IS:6441-1972 of Compressive strength 3 N/mm2 (landing cost - including cost of

conveyance, loading & unloading) 600 x 200 x 150 mm in super structure above plinth

with RCC band at sill level and lintel level with approved block laying polymer modified

adhesive mortar all complete with scaffolding using MS Jack Prop Cup lock Pipe

Scaffolds, including cost anad conveyance of all materials, all incidental, labour

charges , overheads & contractor's profit, etc. as per direction of Engineer-in-Charge,

complete for finished item of work. (The payment of RCC band and reinforcement shall

be made for seperately).

Seventh Floor 73.00 Cum 11,272.00 1 Cum 8,22,856.00

16 Providing and laying autoclaved aerated cement block masonry 100mm thick using

Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185 (Part- 3) - 1984

and IS:6441-1972 of Compressive strength 3 N/mm2 (landing cost - including cost of

conveyance, loading & unloading) 600 x 200 x 100 mm with scaffolding using MS cup

lock pipe scaffolding system, with RCC band at sill level and lintel level with approved

block laying polymer modified adhesive mortar all complete, including cost and

conveyance of all materials, all incidental, labour charges, overheads & contractor's

profit, etc. as per direction of Engineer-in-Charge, complete for finished item of work.

(The payment of RCC band and reinforcement shall be made for separately).

Sixth Floor 148.00 Sqm 1,323.00 1 Sqm 1,95,804.00

NBCC 3 of 10 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Civil Works

S.No. Item Description Quantity Units Rate per Unit Amount

17 Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed

hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm,

15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry

including cost and conveyance of all materials like cement, fine aggregate(sand) (with

50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site,

centering using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel

Centering Plates, etc all charges for mixing, laying concrete in position, curing & lift

charges and cost of overheads & contractors profit etc., complete for Bed Blocks &

Bands in Masonry for finished item of work. (APSS No. 402): HAND MIXING

Sixth Floor 52.00 Cum 7,008.00 1 Cum 3,64,416.00

Seventh Floor 5.00 Cum 7,219.00 1 Cum 36,095.00

18 Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand

and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of

4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all

materials like cement, sand, water etc., to site, all operational, incidental charges on

materials and including cost of all labour charges for mixing mortar, finishing,

scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting

grooves as directed by Engineer-in-charge etc., and overheads & contractors profit

complete for finished item of work .(SS 901,903 & 904)

Sixth Floor 1,272.00 Sqm 802.00 1 Sqm 10,20,144.00

Seventh Floor 50.00 Sqm 853.00 1 Sqm 42,650.00

19 Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50%

Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick

in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials

like cement, sand, water etc., to site, all operational, incidental charges on materials,

cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop

Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer -

in - charge etc., and overheads & contractors profit complete for finished item of work.

Sixth Floor 3,849.00 Sqm 750.00 1 Sqm 28,86,750.00

Seventh Floor 661.00 Sqm 796.00 1 Sqm 5,26,156.00

20 Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon

additives having VOC (Volatile Organic Compound) content less than 30 grams/ litre of

approved brand and shade over a base coat of approved water based Cement Primer of

Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing

the surface to remove all dirt and remains of loose powdered materials, including cost

and conveyance of all materials to work site and all operational, incidental, labour

charges etc. complete and cost of overheads & contractors profit for finished item of

work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3

Sixth Floor 409.00 Sqm 248.00 1 Sqm 1,01,432.00

Seventh Floor 492.00 Sqm 248.00 1 Sqm 1,22,016.00

21 Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC

(Volatile Organic Compound) content less than 30 grams/ litre of approved brand and

shade over a base coat of approved water based Cement Primer of Interior Grade- 1

making 3 coats in all to give an even shade after thoroughly brushing the surface to

remove all dirt and remains of loose powdered materials, including cost and

conveyance of all materials to work site and all operational, incidental, labour charges

etc. complete and cost of overheads & contractors profit for finished item of work as per

SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer.

Sixth Floor 4,712.00 Sqm 139.00 1 Sqm 6,54,968.00

Seventh Floor 219.00 Sqm 139.00 1 Sqm 30,441.00

NBCC 4 of 10 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Civil Works

S.No. Item Description Quantity Units Rate per Unit Amount

22 Providing and applying Exterior grade texture ready mixed paint with sand texture added

sand particles Acrylic copolymers and mineral compounds, bactericides and various

additives having VOC (Volatile Organic Compound) content less than 30 grams/ Lit or

equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface

even and smooth after thoroughly brushing the surface to remove all dirt and remains of

loose powdered materials, applying emery paper, Sand the surface, clean & wipe off

loose dust, applying texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for

the surface preparation including cost and conveyance of all materials to work site and

all operational, incidental, labour charges etc. complete and cost of overheads and

contractors profit for finished item of work for external walls - including cost of access

scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Colouring -

Providing / Texture to External walls.

Sixth Floor 123.00 Sqm 468.00 1 Sqm 57,564.00

Seventh Floor 148.00 Sqm 473.00 1 Sqm 70,004.00

23 Supplying and fixing SINGLE shutter door using factory made solid Wood Polymer

Composite (WPC) single extruded Door Frame section of 100*65 MM with

encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a

rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the

horizontal member using 8x75 MM long MS Star full thread screws to be used with

reverse forward speed control hand drilling machine. The ready/assembled door frame

is fixed to wall using Z Hand fast 300 MM long hold fasts, flush door shutters, solid bond

wood block board type with commercial ply on both faces.: 35 mm thick conforming to

IS:2202 as per drawing including cost of Aluminium fixtures such as 1 No tower bolt of

200x10mm dia, 1 No. Aldrops - 300 mm long, 1No. Latche-300mm long, 2 Nos. handles

of 150 mm size & 1 No. Heavy Duty door stopper & 1 no rubber bushe , including fixing

the fixtures to door with required no. of screws, bolts and nuts including labour charges

for fixing the frame in position, fixing the shutter to the frame etc., complete for finished

item of work as per APSS 1001 & 1002

Sixth Floor 74.00 Sqm 4,968.00 1 Sqm 3,67,632.00

Seventh Floor 9.00 Sqm 4,968.00 1 Sqm 44,712.00

24 Supplying and fixing SINGLE shutter toilet door using factory made solid Wood Polymer

Composite (WPC) single extruded Door Frame section of 100*65 MM with

encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a

rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the

horizontal member using 8x75 MM long MS Star full thread screws to be used with

reverse forward speed control hand drilling machine. The ready/assembled door frame

is fixed to wall using Z Hand fast 300 MM long hold fasts, flush door shutters, solid bond

wood block board type with commercial ply on both faces.: 30 mm thick conforming to

IS:2202, providing and fixing 1 mm thick PVC door cladding to the flush doors shutter

pasted with synthetic glue conforming to IS:2202 as per drawing including cost of

Aluminium fixtures such as 1 No tower bolt of 200x10mm dia, 1 No. Aldrops - 200 mm

long, 1No. Latche-200mm long, 2 Nos. handles of 100 mm size & & 1 no rubber

bushes, including fixing the fixtures to door with required no. of screws, bolts and nuts

including labour charges for fixing the frame in position, fixing the shutter to the frame

etc., complete for finished item of work as per APSS 1001 & 1002

Sixth Floor 38.00 Sqm 5,905.00 1 Sqm 2,24,390.00

25 Supplying and fixing DOUBLE SHUTTER CUPBOARD using salwood frame of size 75 x 30

mm with flush door shutters of solid bond wood block board type with commercial ply

on both faces.: 30 mm thick conforming to IS:2202 as per drawing including cost of

Aluminium fixtures such as 2 Nos. handles of 150 mm size, 6 Nos Aluminium Butt

hinges (IS:205)- 125 mm Long and 4 no Magnetic Catchers including fixing Melamine

Laminate Sheets - Glossy Finish: 1.00 mm thick on frames and both sides of shutters,

including fixing the fixtures to cupboard with required no. of screws, bolts and nuts

including labour charges for fixing the frame in position, fixing the shutter to the frame

etc., complete for finished item of work as per APSS 1001 & 1002.

Sixth Floor 125.00 Sqm 5,293.00 1 Sqm 6,61,625.00

NBCC 5 of 10 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Civil Works

S.No. Item Description Quantity Units Rate per Unit Amount

26 Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows

with mesh shutter – (2-glass shutters and 1-mesh shutter) duly manufactured using

UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of

TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin)of (94 mm x

45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39mm)/(54 mm x 38

mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system

structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness

of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be

fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be

(42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on

rollers/pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-

extruded with Grey colour soft PVC. System shall have single point locking with Touch

Lock and the system is to be installed at the site using anchor fasteners, silicon rubber

sealant, easy glazing/deglazing at site etc., including cost and conveyance of all

materials, accessories, labour charges for transportation, erection at site, overheads

and contractors profit, etc., complete for finished item of work.

Sixth Floor 71.00 Sqm 8,088.00 1 Sqm 5,74,248.00

Seventh Floor 7.00 Sqm 8,088.00 1 Sqm 56,616.00

27 Providing, supplying & fixing of Fixed Louvered Ventilator made from multi chambered

uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having

isolated drainage and reinforced with Galvanized Iron profiles throughout the window.

The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1

mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with

reinforcement of 1 mm thickness. (Composition of profile shall consists of a minimum

of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC

resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall

thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all

materials, accessories, labour charges for transportation, erection at site, overheads

and contractors profit, etc., complete for finished item of work.

Sixth Floor 17.00 Sqm 7,279.00 1 Sqm 1,23,743.00

28 Painting to new wood work with luppam finish to give even & smooth surface and

painting two coats with ready mixed Synthetic Enamel in all shades Grade - I /

Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic

Compound) content less than 30 grams/ Lit over wood primer coat, including cost and

conveyance of all materials to site, all labour charges , including sand paper on lappam

coats for neat even and glossy surface, including cost of overheads & contractors profit,

etc. complete for finished item of work as directed by Engineer-in-charge during

exection - for all floors.

Sixth Floor 162.00 Sqm 259.00 1 Sqm 41,958.00

Seventh Floor 19.00 Sqm 259.00 1 Sqm 4,921.00

29 Supplying and fixing ornamental MS Grills including fabrication and erection in position

using alround frame of 25mm X 6mm MS flat welded with 10mm square bars placed at

6" c/c fixed in both horizontal and vertical directions including cost and conveyance of

all materials to work site and all operational, incidental labour charges, power charges,

overheads & contractors profit etc., complete for finished item of work.

Sixth Floor 71.00 Sqm 1,524.00 1 Sqm 1,08,204.00

Seventh Floor 7.00 Sqm 1,524.00 1 Sqm 10,668.00

30 Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades using

ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel

(IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30

grams/ Lit. over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved

brand to give an even shade after thoroughly cleaning and sand papering the surface to

remove all dirt and remains , including cost and conveyance of all materials to work site

including cost of primer coat and all operational, incidental, labour charges etc.

complete etc., complete including cost of overheads & contractors profit (APSS

No.1200, 1207 & 1211) in all floors.

Sixth Floor 71.00 Sqm 181.00 1 Sqm 12,851.00

Seventh Floor 7.00 Sqm 181.00 1 Sqm 1,267.00

NBCC 6 of 10 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Civil Works

S.No. Item Description Quantity Units Rate per Unit Amount

31 Flooring with Double charged stain free porcelain vitrified tiles with double layer

pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming

to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and

design set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or

RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3

kgs per Sqm. and jointed neately with white cement paste mixed with pigment of

matching shade to match the shade of tiles to full depth including cost and

conveyance of all materials like cement, sand (with 50% river sand & 50%

manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C.

bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles

to required slope as directed by the Engineer- in-charge including cost of overheads

& contractors profit etc., complete for finished item of work. (APSS No.701 & 707)

32 Flooring with Non-skid red or white Ceramic floor tiles of size 300 x 300 mm and

thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1

to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8)

prop. 12mm thick including neat cement slurry of honey like consistancy spread at the

rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of

matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including

cost and conveyance of all materials like cement, sand (with 50% river sand & 50%

manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of

C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying

tiles to required slope as directed by the Engineer-in-charge curing etc., complete and

cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)

33 Flooring with tactile tile (for vision impaired persons as per standards) of size

300x300x9.8mm having with water absorption less than 0.5% and conforming to

IS:15622 of approved make in all colours and shades set over a base coat of CM (1:8)

prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement

slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with

white cement paste mixed with pigment of matching shade to match the shade of tiles

to full depth including cost and conveyance of all materials like cement, sand (with

50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site

(excluding cost of C.C. bed), base coat and all labour charges for mixing of cement

mortar, laying tiles to required slope as directed by the Engineer- in-charge

including cost of overheads & contractors profit etc., complete for finished item of

work. (APSS No.701 & 707)

Sixth Floor 36.00 Sqm 1,814.00 1 Sqm 65,304.00

34 Skirting with Double charged stain free porcelain vitrified tiles with double layer pigment

of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to

IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and

design for internal wall to 10 cm height with length equal to flooring stones and

matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using

screened sand with cement slurry of honey like consistency spread at the rate of 3.30

kgs per sqm and jointed neately with white cement paste mixed with pigment of

matching shade to match the shade of tiles to full depth including cost and

conveyance of all materials like cement, sand (with 50% river sand & 50%

manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all

labour charges for mixing of cement mortar, laying tiles to required slope as directed

by the Engineer- in-charge including cost of overheads & contractors profit etc.,

complete for finished item of work.(APSS No.701 &707) The skirting should flush online

with plastering.

Sixth Floor 67.00 Sqm 1,480.00 1 Sqm 99,160.00

NBCC 7 of 10 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Civil Works

S.No. Item Description Quantity Units Rate per Unit Amount

35 Dadooing to walls with digital / polished glazed porcelain highlighter wall tiles of size

300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo,

stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality

conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all

shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat

grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and

jointed with white cement or coloured cement to match the shade of the tiles, including

cost and conveyance of all materials like cement, sand (with 50% river sand & 50%

manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc.,

to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing

etc., complete for finished item of work as directed by Engineer-in-charge.

Sixth Floor 588.00 Sqm 1,687.00 1 Sqm 9,91,956.00

36 Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other

than black) with borders and design as per the pattern approved by the Engineer-in-

Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) ,

12mm thick using screened sand over CC bed already laid or RCC roof slab including

neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed

neatly with white cement paste mixed with pigment of matching shade to full depth

including cost and conveyance of all materials like cement , sand (with 50% river sand &

50% manufactured sand) , water , granite slabs etc., to work site and all operational,

incidental labour & lift charges, half rounding the edges of treads , polishing charges

and cost of base coat and overheads & contractors profit, complete for finished item of

work for treads (S.S.701 & special)

Sxith Floor 46.00 Sqm 7,494.00 1 Sqm 3,44,724.00

37 Providing risers with 16 to 18mm thick high polished granite stone slabs of regular

colours (other than black) with borders and design as per the pattern approved by the

Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar

(1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab

including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm

and jointed neatly with white cement paste mixed with pigment of matching shade to

full depth including cost and conveyance of all materials like cement , sand (with 50%

river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all

operational, incidental labour & lift charges, polishing charges and cost of base coat

and overheads & contractors profit, complete for finished item of work for Risers

(S.S.701 & special)

Sixth Floor 17.00 Sqm 4,754.00 1 Sqm 80,818.00

38 Providing Platform with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M)

black set over a base coat of CM (1:8) prop. 20mm thick, including neat cement slurry

of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white

cement paste mixed with pigment of matching shade to match the shade of granite to

full depth including cost and conveyance of all materials like cement, sand (with 50%

river sand & 50% manufactured sand), water, granite, white cement etc., to site, cost of

base coat and all labour charges for mixing of cement mortar, laying granite to

required slope as directed by the Engineer- in-charge, cost of overheads &

contractors profit etc., complete for finished item of work (APSS No.701 & 707)

Sixth Floor 50.00 Sqm 4,582.00 1 Sqm 2,29,100.00

39 Supplying and fixing stainless steel works such as raling, hand rale, grills etc., using

Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & Diameters for - 304

Grade as per the approved drawing including cost and conveyance of all materials to

site, Labour charges for Fabrication of stainless steel works using stainless steel

welding rods including buffing, polishing, lacquer finishing, to present seamless finish,

overheads & contractors profit etc ., complete for finished item of work.

Sixth Floor 194.00 Kgs 747.00 1 Kgs 1,44,918.00

NBCC 8 of 10 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Civil Works

S.No. Item Description Quantity Units Rate per Unit Amount

40 Providing specialized high performance acrylic polymer modified elastomeric

cementitious waterproof coating to the terrace / walls / internal portion of the bathroom

& toilets / internal portion of the water tanks duly cleaning of the surface from dirt, dust

and other contaminations, providing and application of Two coats of High-performance

Acrylic polymer modified Elastomeric cementitious waterproof coating ( 1.8 Sq. Mtr. / Kg

/Each Coat ), including all incidental, labour charges, overheads and contractors profit,

etc., complete for finished item of work.

Sixth Floor 149.00 Sqm 544.00 1 Sqm 81,056.00

41 Providing specialized high solid, cold applied, acrylic elastomeric liquid membrane

coating treatment to the terrace / roofing with fibre mesh / geo fabric duly a. Cleaning of

the surface from dirt, dust and other contaminations. b. Applying one coat of High solid,

Cold applied, Acrylic Elastomeric Liquid Membrane coating c. immediately, Application

of one coat of High solid, Cold applied, Acrylic Elastomeric Liquid Membrane coating e.

Laying of fibre mesh 40 GSM / Geo fabric 40 GSM on the surface. f. Over the Fibre mesh,

Application of two coats of High solid, cold applied, Acrylic Elastomeric Liquid

Membrane Coating, including all incidental, labour chares, overheads and contractors

profit, etc., complete for finish item of work.

Seventh Floor 1,224.00 Sqm 796.00 1 Sqm 9,74,304.00

42 Reinforced Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate:

Coarse aggregate) for Dummy columns using 40mm size (SS5) hard Granite metal from

approved quarry including cost and conveyance of all materials like cement, sand (with

50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site,

machine mixing, vibrating, lifting concrete mechanically, laying concrete, curing ,

overheads & contractors profit, centering using Steel scaffolding pipes, jack Props,

Wallers, Foot plates, brackets, steel Centering Plates, etc etc. including all

operational, incidental and labour charges etc., complete but excluding cost of steel

and its fabrication charges for finished item of work upto un supported height up to 3.66

m for dummy columns (APSS No. 402)

Seventh Floor 18.00 Cum 17,690.00 1 Cum 3,18,420.00

43 Providing 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm of ISI marked

including cost of necessary PVC Bends, shoes, PVC clamps and all other accessories

and fixing in position including cost and conveyance of all materials to site, operational

& incidental charges, all labour charges for fixing at site etc., and Overheads &

Contractors profit complete for finished item of work. (APSS No. 1328)

Second Floor 75.00 Rmt 398.00 1 Rmt 29,850.00

NBCC 9 of 10 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Civil Works

S.No. Item Description Quantity Units Rate per Unit Amount

44 Modification, supply, installation, testing, and commissioning for extension of existing 2.00 Nos 6,40,678.00 1 Nos 12,81,356.00

elevators by one additional floor, increasing service from 6 to 7 stops (G+6: Ground to

6th floor) - 884 kg capacity, all with a speed of 1.00 m/s. Elevators are of MR (Machine

Room) type, originally installed by TK Elevator (meta100 MR model), with retention of

existing machine, car, hoistway, car dimensions, doors, and finishes. Only essential

modifications are to be implemented. Scope of modifications includes: Upgrade of

control system to support 7 stops, with new car operating panel programmed

accordingly, One additional landing door set and call button panel to be provided at 6th

floor (new top floor); all lower landing doors and panels retained, Adjustment of travel

height to 21,100 mm with overhead clearance of 4300 mm, Retention of existing power

supply: 230V, 1-phase, 50 Hz AC. Elevators retain: All existing drive mechanisms, car

interiors, car doors, landing doors (except new top floor), Car operating panel

(upgraded), car flooring, finishes, and handrails as originally provided. Scope includes

necessary wiring, programming, and testing for integration of the new stop, ensuring full

functionality in accordance with applicable safety and operational standards. Any shaft

or structural modifications required to extend to the 6th floor are excluded from vendor

scope and to be arranged by the client. Client responsibilities include: Shaft extension

and readiness up to 6th floor, with required finishing per General Arrangement Drawings

(GAD), Provision of 230V supply with proper earthing at required locations, Ensuring

statutory lift license is updated, Providing access, storage, scaffolding (if needed), and

site safety. Warranty and maintenance conditions to follow original or mutually updated

contract terms. Final handover will include testing, commissioning, and submission of

updated lift documentation.

45 Removal and storage of existing MS parapet railing 2 feet high from existing terrace and 180.00 rmt 1,000.00 1 rmt 1,80,000.00

refixing the same at new extended terrace.

46 Removal and storage of existing UPVC Windows of size 4'x5' from existing terrace and 2.00 nos 500.00 1 nos 1,000.00

refixing the same at new extended terrace.

47 Removal and storage of existing Lift Machine room door's size 3'x7' from existing terrace 2.00 nos 750.00 1 nos 1,500.00

and refixing the same at new extended terrace.

48 Removal and storage of existing Mumty room door size 3'x7' from existing terrace and 2.00 nos 750.00 1 nos 1,500.00

refixing the same at new extended terrace.

Note :( Item 45 to 48) - During removal of the items, if any damage is observed the same

shall be replaced and the cost shall be bourne by the contractor.

NBCC 10 of 10 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Water Supply & Sanitary Works

S.No. Item Description Quantity Units Rate per Unit Amount

1 Supplying & fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings, including 36.00 Nos 194.00 1 Nos 6,984.00

cost and conveyance of all materials to site, all operational, incidental, labour charges,

overheads & contractors profit etc. complete for finished item of work.

2 Supply, Installation and commissioning approved make floor mounted Close Coupled wash 8.00 Nos 13,626.00 1 Nos 1,09,008.00

down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or 'S' trap with dual flush porcelain

cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat

cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long

PVC inter connection pipe wall flanges all of approved make, including cost and conveyance of

all materials to site, all operational,incidental , labour charges, overheads and contractor's

profit etc. complete for finished item of work in all respects: White Colour

3 Supplying & Fixing Orissa Pan White glazed W.C 1st quality ISI marked conforming to IS:2556- 4.00 Nos 5,956.00 1 Nos 23,824.00

Part-3-2004 with "P" or "S" trap : 580 mm x 440 mm duly providing constructing Brick masonry

seat using 2nd class bricks, CC Squatting plate in P.C.C 1:2:4, S&F PVC Low level system with

internal components & short bend: 10 Litres capacity Single Flush, S&F of 15 mm brass angle

stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded

conforming to IS 8931 and S&F 15 mm nominal size PVC connection with brass union nut C.P

coated including cost and conveyance of all materials , operational, incidental, labour charges,

overheads and contractor's profit etc.,. complete as per standard practice for finished item of

4 Supplying & Fixing Indian make WHITE Flat Back Wash Hand Basin of size 550 x 400 mm with 12.00 Nos 3,552.00 1 Nos 42,624.00

Single C.P. Pillar cock 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like

rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to

IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality

Indian make 400 grams, 15 mm brass angle stop valve of quarter turn spindle type of not less

than 400 grams weight with internal threaded conforming to IS 8931, 15 mm nominal size PVC

connection with brass union nut C.P coated, 30 mm nominal size dia PVC flexible waste pipe of

914.4 mm length of Ist quality and standard CI brackets including wooden block, including cost

and conveyance of all materials to site, all operational,incidental , labour charges, overheads

and contractor's profit etc. complete for finished item of work in all respects.

5 Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with 2.00 Nos 8,601.00 1 Nos 17,202.00

accessories, including cost and conveyance of all materials to site, all operational, incidental,

labour charges, overhead & contractor's profit etc., complete for finished item of work in all

floors as directed by Engineer-in-charge.

6 Supply and fixing CP finish brass soap dish of approved make with screws, including cost and 12.00 Nos 716.00 1 Nos 8,592.00

conveyance of all materials to site, all operational, incidental, labour charges and overhead &

contractor's profit etc. complete for finished item of work as directed by Engineer-in-charge.

7 Supplying and fixing Rectangular Mirror Frameless of size 609.6 mm x 914.4 mm including cost 12.00 Nos 3,555.00 1 Nos 42,660.00

and conveyance of all materials to site, all operational, incidental, labour charges etc. overhead

& contractor's profit etc. complete for finished item of work in all floors as directed by Engineer-

8 S & F 19.04 mm dia & 609.6 mm long aluminium anodized towel rod with brackets and 24.00 Nos 181.00 1 Nos 4,344.00

aluminium screws, including cost and conveyance of all materials to site, all

operational,incidental , labour charges, overheads and contractor's profit, etc. complete for

finished item of work.

9 S&F CP finish brass wall mounted towel ring, including cost and conveyance of all materials to 12.00 Nos 777.00 1 Nos 9,324.00

site, all operational,incidental , labour charges, overheads and contractor's profit, etc.

complete for finished item of work.

10 S&F double coat hook with 10 years warranty including cost & conveyance of all materials, 24.00 Nos 943.00 1 Nos 22,632.00

labour charges, overheads & contractor's profit etc., complete for finished item of work as

directed by Engineer-in-charge.

NBCC 1 of 3 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Water Supply & Sanitary Works

S.No. Item Description Quantity Units Rate per Unit Amount

11 S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with 10.00 Nos 958.00 1 Nos 9,580.00

quarter turn spindle internal / external threaded connection conforming to IS 8931, including

cost and conveyance of all materials to site, all operational, incidental, labour charges,

overheads and contractor's profit, etc. complete for finished item of work.

12 S&F of 15 mm premium variety Chromium plated finish brass body wall mixer with hand shower 14.00 Nos 4,563.00 1 Nos 63,882.00

with a provision for over head shower with 115 mm long bend pipe on upper side, connecting

legs & wall flanges conforming to IS 8931 with 10 years warranty, including cost and

conveyance of all materials to site, all operational, incidental, labour charges, overhead &

contractor's profit etc. complete for finished item of work in all floors as directed by Engineer-in-

13 S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m 12.00 Nos 4,008.00 1 Nos 48,096.00

long tube and wall hook with 10 years warranty, including cost and conveyance of all materials

to site, all operational,incidental , labour charges, overheads and contractor's profit, etc.

complete for finished item of work.

14 S&F premium make CPVC Pipes - SDR13.5, including the cost of pipe & its fittings & labour

charges complete including cost and conveyance of all materials to site, all operational,

incidental, labour charges, cost of overheads & contractor profit etc.complete for finished item

of work as directed by Engineer-in-charge

15 S & F Bronze Gate/ Globe valve as per IS - 778 Class - I,Indian make heavy type as approved by

the Engineerin-charge including cost and conveyance of all materials to site, all

operational,incidental , labour charges, overheads and contractor's profit, etc. complete for

finished item of work in all floors as directed by Engineer-in-charge.

25mm Nominal Bore 4.00 Nos 1,538.00 1 Nos 6,152.00

32mm Nominal Bore 4.00 Nos 2,337.00 1 Nos 9,348.00

40mm Nominal Bore 4.00 Nos 3,152.00 1 Nos 12,608.00

50mm Nominal Bore 2.00 Nos 4,623.00 1 Nos 9,246.00

16 Supplying & fixing Bronze Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty

as approved by the Engineer-in-charge, including cost and conveyance of all materials to site,

all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for

finished item of work in all floors as directed by Engineer-in-charge.

20mm Nominal Bore 4.00 Nos 857.00 1 Nos 3,428.00

25mm Nominal Bore 4.00 Nos 1,338.00 1 Nos 5,352.00

32mm Nominal Bore 4.00 Nos 1,963.00 1 Nos 7,852.00

40mm Nominal Bore 2.00 Nos 2,721.00 1 Nos 5,442.00

17 Supplying & fixing Bronze Vertical Check (Non return) Valve as per IS-778 I-class heavy duty as

approved by the Engineer-in-charge, including cost and conveyance of all materials to site, all

operational,incidental , labour charges, overheads and contractor's profit, etc. complete for

finished item of work in all floors as directed by Engineer-in-charge.

20mm Nominal Bore 4.00 Nos 720.00 1 Nos 2,880.00

25mm Nominal Bore 4.00 Nos 1,087.00 1 Nos 4,348.00

32mm Nominal Bore 4.00 Nos 1,494.00 1 Nos 5,976.00

40mm Nominal Bore 2.00 Nos 1,808.00 1 Nos 3,616.00

50mm Nominal Bore 1.00 Nos 2,865.00 1 Nos 2,865.00

NBCC 2 of 3 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Water Supply & Sanitary Works

S.No. Item Description Quantity Units Rate per Unit Amount

18 Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain

bends, off sets, door bends, single junctions, double junctions etc., as per site requirement,

fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per

standard practice including cost and conveyance of all materials to site, all operational,

incidental, labour charges, overheads & contractors profit etc., complete for finished item of

work at all floor levels . (APSS No. 1302 1319 & 1326)

19 Constructing Brick masonry support for G.I pipe with C.M 304.8 x 228.6 x228.6 mm size 30.00 Nos 107.00 1 Nos 3,210.00

including plastering, cost and conveyance of all materials to site, all operational, incidental,

labour charges, overhead & contractor's profit etc complete for finished item of work in all

floors as directed by Engineer-in-charge.

20 Chiselling the stone masonry wall for fixing of wooden blocks including finishing as directed by 40.00 Rmt 47.00 1 Rmt 1,880.00

the department including all operational, incidental, labour charges, overheads & contractors

profit etc. complete for finished item of work.

21 Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double 25,000.00 Ltr 11.00 1 Ltr 2,75,000.00

layer approved brand & manufacture with cover and suitable locking arrangement & making

necessary holes for inlet & outlets and overflow pipes but without fittings & base support for

tanks, including all incidental, labour charges, overheads and contractors profit, etc., complete

for finished item of work.

22 Removal, Storage of exisiting CPVC raw water line 1.5 dia from exisiting terrace and refixing the 150.00 rmt 150.00 1 rmt 22,500.00

same at the new extended terrace.

23 Removal, Storage of exisiting CPVC Drinking water line 1.5" dia from exisiting terrace and 40.00 rmt 150.00 1 rmt 6,000.00

refixing the same at the new extended terrace.

24 Removal and storage of existing Syntax Tank 1000 litre from existing terrace and refixing the 3.00 nos 1,200.00 1 nos 3,600.00

same at new extended terrace.

Note :( Item 22 to 24) - During removal of the items, if any damage is observed the same shall be

replaced and the cost shall be bourne by the contractor.

NBCC 3 of 3 ARCHITECTS

Digitally STUDIO

signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Internal Electrification Works

S.No. Item Description Quantity Units Rate per Unit Amount

1 Supply and Laying of ISI 25mm outer dia heavy grade with IS:9537 part 3 2,500.00 Rmt 110.00 1 Rmt 2,75,000.00

regid PVC pipe concealed in Roof Slabs with all required PVC / Metallic

Deep Boxes including masonary work and labour charges etc., complete.

Makes: Sudhakar / Modi / Polycab / Finolex / VIP

2 Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 800.00 Rmt 89.00 1 Rmt 71,200.00

regid PVC pipe consealed in wall with Metallic junction boxes and all

required accessories including masonary work for light, fan and separate

plug point with supply and fixing of suitable size Metal Modular deep box

including all labour charges etc., complete. Makes: Sudhakar / Modi /

Polycab / Finolex / VIP

3 Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 900.00 Rmt 89.00 1 Rmt 80,100.00

regid PVC pipe consealed in wall with all required Metallic Junction Boxes

including masonary work and labour charges etc., complete for Run of

mains Makes: Sudhakar / Modi / Polycab / Finolex / VIP

4 Wiring with run of 2 of 1.5 Sq.mm FRLSH / HFFR PVC insulated flexible ISI 228.00 Points 937.00 1 Points 2,13,636.00

marked copper cable make in existing pipe including supply and fixing of

3 Plate Jumbo Ceiling Rose / Batten Holder and 6A ISI marked Modular

type switch including cost and conveyance of all material and all labour

charges etc., complete for light and bell points in N.R.B. Copper Cable

Makes : Finolex / RR kabel / Havells /Polycab Accessories Makes : Legrand

Lyncus / GM Four Five / Million / Goldmedal Curve / Anchor Roma Plus /

Crabtree Verona / Panasonic Vision Ceiling Rose / BH Makes :GM G Home

/ Gold Medal Olive / Million Zoom / Anchor

5 Wiring with run of 2 of1.5 Sqmm / HFFR PVC insulated flexible ISI mark 6.00 Points 1,405.50 1 Points 8,433.00

copper cable in existing PVC conduit pipe including Supply and fixing of

Jumbo Ceiling rose and 10A ISI Mark 2way Modular switch with required

modular box and cover frame in existing Surface or Concealed pipe

wiring,ferrules including cost and conveyance of all material and all labour

charges etc., complete for Stair case points in N.R.B . Copper Cable

Makes : Finolex / RR kabel / Havells /Polycab Accessories Makes : Legrand

Lyncus / GM Four Five / Million / Goldmedal Curve / Anchor Roma Plus /

Crabtree Verona / Panasonic Vision Ceiling Rose / BH Makes :GM G Home

/ Gold Medal Olive / Million Zoom / Anchor

6 Wiring with run of 3 of 1.5 Sq.mm FRLSH / HFFR PVC insulated flexible ISI 78.00 Points 1,165.00 1 Points 90,870.00

marked copper cable make in existing pipe including supply and fixing of

3 Plate Jumbo Ceiling rose of 6A ISI marked Modular type switch including

cost and conveyance of all material and all labour charges etc., complete

for fan and exhaust fan points in N.R.B. Copper Cable Makes : Finolex / RR

kabel / Havells /Polycab Accessories Makes : Legrand Lyncus / GM Four

Five / Million / Goldmedal Curve / Anchor Roma Plus / Crabtree Verona /

Panasonic Vision

NBCC 1 of 5 ARCHITECTS

Digitally signed STUDIO

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Internal Electrification Works

S.No. Item Description Quantity Units Rate per Unit Amount

7 Supply and fixing of ISI Marked 6A/10A 3/2 pin Modular socket with 72.00 Nos 574.00 1 Nos 41,328.00

6A/10A 1way Modular switch on a common switch board Module box with

cover frame with connections including cost and conveyance of all

materials and all labour charges etc., complete in N.R.B. / R.B.

Accessories Makes : Legrand Lyncus / GM Four Five /Million / Goldmedal

Curve / Anchor Roma Plus / Crabtree Verona / Panasonic Vision

8 Wiring with run of 3 of 1.5 Sqmm FRLSH / HFFR PVC insulated flexible ISI 1.00 Points 969.00 1 Points 969.00

marked copper cable including Supply and fixing of ISI Marked 10A- 3/2

pin Modular socket, 10A 1way Modular switch with required cover frame

including connections, cost and conveyance of all material and all labour

charges etc., complete for seperate plug points in N.R.B. / R.B.

9 Supply and fixing of ISI marked 16A 3pin / 6A 3 Pin 1 way Modular combi 8.00 Nos 786.00 1 Nos 6,288.00

socket, 16 Amps Modular switch on a 3 Modular box with suitable cover

frame with connections including cost and conveyance of all material and

all labour charges etc., complete in N.R.B. / R.B. Accessories Makes :

Legrand Lyncus / GM Four Five / Million / Goldmedal Curve / Anchor Roma

Plus / Crabtree Verona / Panasonic Vision

10 Supply and fixing of ISI marked 3 Nos 10A Modular type switches, 3Nos 66.00 Nos 1,500.00 1 Nos 99,000.00

10A 3/2 pin wall plug sockets on 9 Modular box with cover frame including

connections, cost and coveyance of all material and all labour charges

etc., complete for Computers in N.R.B. / R.B. Accessories Makes :

Legrand Lyncus / GM Four Five /Million / Goldmedal Curve / Anchor Roma

Plus / Crabtree Verona / Panasonic Vision

11 Supply and Run of 3 of 2.50 Sq.mm FRLS / HFFR PVC insulated flexible ISI 4,200.00 Rmt 157.00 1 Rmt 6,59,400.00

marked copper cable in existing pipe for run of mains including

connections and all labour charges etc., complete. Copper Cable Makes :

Finolex / RR kabel / Havells /Polycab

12 Supply and Run of 3 of 4.00 Sq.mm FRLS / HFFR PVC insulated flexible ISI 160.00 Rmt 239.00 1 Rmt 38,240.00

marked copper cable in existing pipe for run of mains including

connections and all labour charges etc., complete. Copper Cable Makes :

Finolex / RR kabel / Havells /Polycab

13 Supply and Run of 5 of 6.0 Sq.mm FRLS / HFFR PVC insulated flexible ISI 170.00 Rmt 572.00 1 Rmt 97,240.00

mark copper cable in existing pipe for run of mains inlcuding all labour

charges etc., complete.

Copper Cable Makes : Finolex / RR kabel / Havells /Polycab

14 Supply and Run of 5 of 10.0 Sq.mm FRLS / HFFR PVC insulated flexible ISI 60.00 Rmt 898.00 1 Rmt 53,880.00

mark copper cable in existing pipe for run of mains inlcuding all labour

charges etc., complete.

Copper Cable Makes : Finolex / RR kabel / Havells /Polycab

NBCC 2 of 5 ARCHITECTS

Digitally signed STUDIO

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Internal Electrification Works

S.No. Item Description Quantity Units Rate per Unit Amount

15 Supply and transportation of 18W +/- 10% LED back lit LED Down Light 177.00 Nos 1,860.00 1 Nos 3,29,220.00

Recessed / Surface mounting round / square with housing made of

Powder coated Pressure die cast aluminium housing with extended heat

sink, with Protruded high efficiency diffuser, IP20, with wide operating

voltage range, Power factor > 0.9, Surge protection: > 2KV, System

efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the

department and as per IS, CRI >80, and THD is less than 15% etc.,

complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE :

Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar or equilent

as approved by the Department

16 Supply and fixing of Ding Dong Bell including giving connections, cost of 1.00 Nos 209.00 1 Nos 209.00

all accessories and labour charges etc., complete of Makes :GM / Million /

Gold Medal / Anchor / Great white.

17 Supply, transportation and fixing of 22W +/ 10% , >/ 2300 lumens, 1200 51.00 Nos 875.00 1 Nos 44,625.00

mm (+/- 10%) length LED light housing made with alluminium anodised

body, wide operating voltage with PF≥0.9, Surge protection: > 2KV,

THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as

desired by the department as per IS, minimum CRI≥80 etc., complete with

5 years warranty with BIS Certification with BIS Certification.LUMINAIRE

MAKE : Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar LED

MAKE : PHILIPS LUMILEDS / CREE / NICHIA/ OSRAM / SAMSUNG / LG

18 Supply, Transportation and fixing of energy efficient fan, 1200 mm sweep, 66.00 Nos 3,642.00 1 Nos 2,40,372.00

aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush

Less Direct Current (BLDC) motor, class of insulation: B, 3 no's blades, 30

cm long down rod, 2 no's canopies, shackle'kit, copper winding, Power

Factor greater than 0.90, Service Value (CMMAV) greater than 8.0, Air

delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019),

THD less than 10%. with remote or compatible to electronic step type

regulator unit for speed control and all remaining accessories including

safety pin, nut bolts, washers, temperature rise=75°C(max), insulation

resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase

AC supply, earthing etc., including all standard accessories etc., complete

but without regulator including all standard accessories with twin core

flat copper wire of Finolex / RR kabel / Havells connections and all labour

charges etc., complete. Makes : Atomberg (Efficio) / Havells / Orient /

Halonix / Crompton

19 Supply and fixing of modular Stepped electronic regulator with 66.00 Nos 637.00 1 Nos 42,042.00

connections and Labour charges etc complete.

Makes : Legrand Lyncus / GM Four Five /Million / Goldmedal Curve /

Anchor Roma Plus / Crabtree Verona / Panasonic Vision

20 Supply, Transportation and Fixing of light duty 8" (200mm) RPM BLDC 8.00 Nos 3,137.00 1 Nos 25,096.00

exhaust fan necessary accessories etc., complete

Makes : Atomberg / Crompton / Havells / Orient.

21 Supply, Transportation and Fixing of Supply of 12" (300mm), 900RPM 4.00 Nos 4,296.00 1 Nos 17,184.00

heavy duty exhaust fan with double ball bearing and wire guard etc

complete with all labour charges etc. complete as directed at site. Makes :

Crompton / Almonard / Havells Turbo Force SP

NBCC 3 of 5 ARCHITECTS

Digitally signed STUDIO

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Internal Electrification Works

S.No. Item Description Quantity Units Rate per Unit Amount

22 Supply and fixing of GI louver shutter including GI mesh to avoid birds 4.00 Nos 205.00 1 Nos 820.00

entry with necessary materials suitable for exhaust fan.

23 Supply and fixing 4 Way TPN DB Horizontal with IP 43 Protection as per 4.00 Nos 12,966.00 1 Nos 51,864.00

IS:13032 and suitable for 1 No 4 pole Incomer of 40A FP Isolator and

12Nos. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 100 A tinned

copper busbar, neutral bar, earth bar and cable ties for cable

management, fully shrouded neutral bar, profile blanking modules for

unused MCB ways, din bars and detachable gland plate etc complete with

inter connections and labour charges for Flush Mounting etc., complete.

DB Makes : Legrand / Schneider / Siemens / LK (L&T) / Hager / Crabtree

Xpro / BCH, MCCB make:LK (L&T) - D sine / Schneider-NS NSX/Legrand -

DP X3/ Siemens-3V / Hager-h3 / C&S -Winbreak / BCH,MCB make

:Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree /

Indo Asian / BCH

24 Supply and fixing 4 Way TPN DB Horizontal with IP 43 Protection as per 2.00 Nos 13,108.00 1 Nos 26,216.00

IS:13032 and suitable for 1 No 4 pole Incomer of 63A FP Isolator and

12Nos. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 100 A tinned

copper busbar, neutral bar, earth bar and cable ties for cable

management, fully shrouded neutral bar, profile blanking modules for

unused MCB ways, din bars and detachable gland plate etc complete with

inter connections and labour charges for Flush Mounting etc., complete.

DB Makes : Legrand / Schneider / Siemens / LK (L&T) / Hager / Crabtree

Xpro / BCH, MCCB make:LK (L&T) - D sine / Schneider-NS NSX/Legrand -

DP X3/ Siemens-3V / Hager-h3 / C&S -Winbreak / BCH,MCB make

:Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree /

Indo Asian / BCH

25 Supply and fixing of 8 way VTPN DB IP 43 Protection as per IS:13032 With 1.00 Nos 62,074.00 1 Nos 62,074.00

and suitable for 1 No 125A 4 pole MCCB Incomer and 4 Nos 63A 10KA TP

MCB, ISI Marked C/D CURVE with 100 A tinned copper busbar, neutral

bar, earth bar and cable ties for cable management, fully shrouded neutral

bar, profile blanking modules for unused MCB ways, din bars and

detachable gland plate etc complete with inter Connections and labour

charges for Flush Mounting etc., complete. DB Makes : Legrand /

Schneider / Siemens / LK (L&T) / Hager / Crabtree Xpro / BCH, MCCB

make:LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3V /

Hager-h3 / C&S -Winbreak / BCH,MCB make :Legrand-DX3 / Schneider-

Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH

26 Supply and fixing of DB with 1 No 20A single phase plug and Socket, in 1.00 Nos 2,734.00 1 Nos 2,734.00

sheet steel enclosure with 1 No 10A to 20A 10 KA ISI Marked C/D curveSP

MCB including internal connection and labour charges for Flush Mounting

etc., complete. Makes : Legrand / Schneider .

27 Supply and laying of LAN Cable cat - 6 UTP Cable. Makes : D Link / AMP / 1,980.00 Rmt 45.00 1 Rmt 89,100.00

Molex / Legrand / Krone.

28 Supply and fixing of Cat 6 RJ-45 information outlets including duel face 66.00 Nos 693.00 1 Nos 45,738.00

plate connections on a suitable module box with a cover frame and

Labour charges etc complete.

Makes: D Link / AMP / Molex / Legrand / Krone.

29 Supply and laying of 2 Pair, 0.5mm telephone copper cable. Makes : 100.00 Rmt 25.00 1 Rmt 2,500.00

Finolex / Delton / Surabi / Polycab

NBCC 4 of 5 ARCHITECTS

Digitally signed STUDIO

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Girls Hostel - 7 Internal Electrification Works

S.No. Item Description Quantity Units Rate per Unit Amount

30 Supply and laying of 20 Pair, 0.5mm telephone copper cable. Makes : 50.00 Rmt 114.00 1 Rmt 5,700.00

Finolex / Delton / Surabi / Polycab

31 Supply of 20 pair Telephone distribution box with back mount frame, 1.00 Nos 1,956.00 1 Nos 1,956.00

krone connector, powder coated metal body with lock and key

32 Supply of and fixing Modular socket type Telephone jack with Connector. 1.00 Nos 340.00 1 Nos 340.00

Makes : Legrand Lyncus / GM Four Five /Million / Goldmedal Curve /

Anchor Roma Plus / Crabtree Verona / Panasonic Vision

33 Supply and fixing of 7 feet length moulded patch cord. Makes : Digisol / TP 10.00 Nos 222.00 1 Nos 2,220.00

Link / D link. / Legrand

34 Supply and fixing of 3 feet length moulded patch cord. Makes : Digisol / TP 66.00 Nos 199.00 1 Nos 13,134.00

Link / D link. / Legrand

35 Supply, installation, testing & Commissioning of Manegable switch L2 24 3.00 Nos 16,359.00 1 Nos 49,077.00

Port 10/100/1000 mbps speed T-ports of auto sensing type ethernet ports

and 4 Nos sfp+10 GbE, core switch suitable for existing network including

connections and terminations and integrating the same with existing

network etc, as required. Make: D-Link Model-DGS-1210-28

36 Supply of unloaded 24 port patch panel with IO separate Makes : Digisol / 3.00 Nos 7,578.00 1 Nos 22,734.00

TP Link / D link. / Legrand

37 Supply and installation of 600 mm width x 500 mm depth UL certified 9U 1.00 Nos 9,527.00 1 Nos 9,527.00

wall mounting network rack with sheet steel revited metal frame,top and

bottom cover with brush cable entry, confirming to following standards

310, IEC 60927 including all accessories like horizontal PDU, metal cable

manager, hardware packet and the cantilever shelf etc., complete. Makes

: Vallrack (Legrand) / Netrack.

38 Removal, storage, and refixing of Lightening arrestor. 1.00 nos 7,500.00 1 nos 7,500.00

39 Removal and storage of existing earthing strips from existing terrace 6.00 rmt 100.00 1 rmt 600.00

and refixing the same at new extended terrace.

Note :( Item 38 to 39) - During removal of the items, if any damage is

observed the same shall be replaced and the cost shall be bourne by the

NBCC 5 of 5 ARCHITECTS

Digitally signed STUDIO

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Classroom furniture, student bed & chair

S.No. Item Description Quantity Units Rate Amount

1 Single cot of size 6'x3" x 31" made in 16 gauge sheet Tata/jindal 50.00 Nos 6,483.00 3,24,150.00

the frame will be 1*1/4" 2mm MS HR Pipe with powder coated

paint. All CR Sheet section are shall be pretreated and epoxy

powder coated 50-60 microns thickness as approved by

Enginener in-charge- All hostels

2 Royal Visitor S type chair visitor S type cushion chiar seat and 44.00 Nos 2,680.00 1,17,920.00

back cushion foam quality moulded ply with PU handles with

1" MS HR round pipe 14 gauge with fabric . All CR Sheets and

pipes section are shall be pretreated and epoxy powder coated

50-60 microns thickness as approved by Engineer in charge..-

Classrooms & Hostel

3 Student reading table of size 3'x2'x30" with 1" square pipe 16 25.00 nos 2,976.00 74,400.00

gauge pipe top with 18mm pre-laminate board with powder

coated paint.( Only in GH-7)( 2 CHAIRS IN ONE ROOM)

NBCC 1 of 1 ARCHITECTS STUDIO

Digitally signed by DEEPAK

NALSAR UNIVERSITY

NAME OF THE WORK : CONSTRUCTION OF VARIOUS INFRASTRUCTURE WORKS AT NALSAR CAMPUS, HYDERABAD

Abstract Estimate : Rebarring & firefighting work.

S.No. Item Description Quantity Units Rate Amount

1 Rebarring of column bars of dia as per design by drilling holes LS 3,00,000.00 3,00,000.00

upto specific depth using hilti/fisher/wurth rebarring chemical

and fixing reiforcement steel of specified length for achieving

desired lep length of steel. ( for all blocks)

2 Supplying, installation, testing and commissioning of weather

proof M.S cabinet size 1200 mm wide x 2100 mm height x

600mm deep fabricated from 1.6mm thick M.S. sheets and

M.S angle 40mmx40mmx6mm complete with glass, locking

arrangements to accommodate the following.

Gunmetal single headed Hydrant valve - 1 No. 3.00 Nos 11,649.00 34,947.00

Fire Hoses 63mm, 15 M long with accessories - 2 Nos.

Short branch - 1 No.

First Aid hose Reel - 1 No.

Fire Extinguisher - 2 Nos.

Fireman's Axe - 1 No.

Pressure Gauge - 1 No.

The cabinet shall be painted with one coat of primer and 2

coats of synthetic enamel paint of approved shade.

3 Providing, laying, testing & commissioning of 'C' class 15.00 Mtr 3,005.00 45,075.00

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

tapers, nuts bolts, gaskets etc. and fixing the pipe on the

wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint

of required shade complete as required :

4 Removal, Storage of exisiting MS fire pipeline of 100mm dia 30.00 rmt 2,200.00 66,000.00

from exisiting terrace and refixing the same at the new

extended terrace.

5 Removal and storage of existing fire pumps,gauge and other 1.00 nos 5,000.00 5,000.00

accessories from existing terrace and refixing the same at new

extended terrace.

*( Item 4 to 7) - During removal of the items, if any damage is

observed the same shall be replaced and the cost shall be

bourne by the contractor.

*Rebaring item qty has been taken considering 6 bars for each

column as an estimate since the structural stability report is

still awaited from clients

NBCC 1 of 1 ARCHITECTS STUDIO

Digitally signed by DEEPAK