Supplying installation testing and commissioning of Solar Light with bracket in Delhi Cantt Assembly Constituency AC 38 out of MLA LADS fund during 2026 27

Supplying, installation, Testing & Commissioning of the integrated type solar PV lighting system on the existing pole structure, comprising of 30 watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum efficiency 21%), Pulse with modulation (PWM)/Maximum Power point tracking (MPPT) charge Controller in the box with a sleek appearance and a sturdy structure, is weather-proof, and is simple to install, With Lithium- Iron Phosphate Battery (LiFePO4), charging time 8-10 hours, Battery backup time 12 hours (minimum), LED fixture watt 30 watt, Input voltage: 12V DC , Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency > 85%, IP-66,IK-08, CRI >70 , under voltage and over voltage protection, Electro Magnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per CISPER 15 A, lenses for beam angle as per Illuminating Engineering Society of North America (IESNA) type I/II/III as per the width of the road and the project requirement, Correlated Colour Temperature (CCT) 5700°K (As per American National Standard Institute (ANSI Bin)) , life time (LED,Driver & electrical circuitary) of 50K hours lamp buring hours till the 70 % of initial Lumen maintained as per LM80 extrapolation IESTM-21-11 report, automatic swich on/off, illiuminium or Acrylonitrile Butadiene Styrene (ABS body), can be installed on a pole or wall. System lumen efficacy >120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. All as per pre approved by Engineer in-charge complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required, complete with mounting structure for the battery and accessories suitable for withstand wind storm speed as per the site location. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).30 Watt (System lumen efficacy >120 lm/Watt)

Fabrication, Designing, Supplying & Fixing of G.I Galvanized arm street light pole bracket made out of 50 mm dia G.I Pipe i/c painting with 2 coat of synthetic enamal paint and fixing with suitable size MS strip and tighteening with nut bolts etc. complete as required and as per site requirement or as per direction given by Engineer-In-Charge.

SITC of Acid etched in reverse pattern S.S (grade-304) name plate with letters embossed in black colour and tighten with screws/ pasting with epoxy bond on the existing pipe / wall etc complete as reqd. (Size will be decided by the E-inCharge