Repairs to roofs joinery sanitary fittings plastering sunken floor internal water supply and other allied works at AC Records and AC Depot and 58 Coy Suply under AGE B/R-II at GE (North) Ahmednagar

Amount

Dismantling of stone slab & tiles of any description in floor, laid, bedded & pointed in any mortar in any situation etc complete all as specified and directed by Engineer-in-Charge

Demolition of un-reinforced cement concrete in ground floor & paving n.exc. 15cm thick below or above ground level etc complete all as specified and directed by Engineer-in-Charge

Dismantling timber scantlings 40 Sqcm and over in section, in any position etc complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided etc complete all as specified and directed by Engineer-in-Charge

Material and labour for providing water proofing treatment on roofs, as per manufacturer's instructions and as specified after taking down/out as existing tarfelt at site etc complete all as specified and directed by Engineer-in-Charge:- (a) Rendering 10 mm thick in cement and sand mortar (1:3) by using 100% coarse sand on roof mixed with & including WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement. (b) Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.30 ltrs/sqm and allow to dry. (c) Applying and laying torch APP polymer modified bituminous membrane 3 mm thick with non woven polyester mat as reinforced weighing not less than 3 kg/sqm by thermo fusion process as per manufacturers specification including applying one coat of aluminum paint.

M&L for moorum filling in floors or paving laid in layers n.exc. 15cm thick spread leveled and rammed including watering etc complete all as specified and directed by Engineer-in-Charge

M&L for hard core of gauge etc. 63 mm but n. exc. 100 mm deposited spread and leveled in layers n. exc. 15cm thick water and rammed etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC Type B-1 (1:2:4) using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and floor slab etc complete all as specified and directed by Engineer-in-Charge

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 09 (here-in-before) but 6 to 8 mm dia

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws including dismantling corrugated steel sheeting, any gauge, thickness etc complete all as specified and directed by Engineer-in-Charge

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof fixed with self tapping screws complete all as specified, colour and design as approved by GE including dismantling of plain steel sheeting, any gauge, thickness etc complete all as specified and directed by Engineer-in-Charge

M & L 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc including dismantling etc complete all as specified and directed by Engineer-in-Charge

Fixing only 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc including dismantling etc complete all as specified and directed by Engineer-in-Charge

S&F of Steel work in tubular trusses including special shaped washer etc. complete conforming to I. S.1161-1979 grade St.-240 etc complete all as specified and directed by Engineer-in-Charge

S&F of steel work in post, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. as per Fe 410 -W (Gde- E- 250) quality- A etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide etc complete all as specified and directed by Engineer-in-Charge

M & L for pre-cast cement concrete solid blocks, exc. 10 cm in width type C-1 (1:3:6) using 20 mm graded stone aggregates and setting in cement and sand mortar (1:6) including demolition etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:4) finished even and fair without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 10 mm thick on brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new plastered surfaces of walls and applying two coats for cement paint etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 10 mm thick on brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth without using extra cement including taking down cement mortar plaster on brick or stone walls, raking out joints, hacking for key etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of newly plastered surface of walls and apply two coats of OBD with roller finish etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old plastered surface of wall and applying one coat of OBD etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old wooden surface and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old steel surface and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old plastered surface of walls and applying one coat of cement base paint etc complete all as specified and directed by Engineer-in-Charge

M & L for complete removal of existing treatment of walls and apply two coats of OBD over a layer of POP finish finished with roller finish including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M/L for providing 75mm thick plain cement concrete (1:4:8) type D2 (40mm graded stone aggregate) as in sub base finished rough to receive finish etc complete all as specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles digitally printed premium designer series of size exc 0.12 Sqm and n'exc 0.18 Sqm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified anti skid ceramic coloured tiles SSR series Johson/ FT series of orient bell/ dura cotto series of nitco or equivalent in kajaria make as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

All as per item No. 32 (here-in-before) but in skirting over 10 mm thick backing in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified anti skid ceramic coloured tiles printed premium series matching to wall makes as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Vitrified ceramic tiles full body vitrified tiles GVT series of Johnson or equivalent in orient bell/ kajaria/ nitco ,10 mm thick (square / rectangular) of size 800 x 800 mm of any shade as approved by GE in floor etc laid over and including roughening existing surface , making good the damaged surface, leveling, and fixing with cement based tile adhesive ( Make FOSROC, DR FIXIT) as per the manufacturer's instructions and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

All as per srl item No.35 but over 10 mm thick backing in cement and sand mortar (1:4) as in dado / skirting or on vertical surfaces

S&F in repairs, shower rose with shower arm from Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) from MARC or equivalent make mntioned in list of makes in appendix `C' etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device etc complete all as specified and directed by Engineer-in-Charge connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge. Make:-Petite series Cat part No C0287(S)/88(P) Incl seat cover Cat part No E8309 of Parryware or equivalent make as per list of makes mentioned in appendix `C

S&F fix in repairs wash hand basin vitreous China white , flat back or angle type of size 500 X 400 mm incl pillar tap 15mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets, or erecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge Make :- Cat Part No C0471 (CHT) Indus series Of Parryware or equivalent makes as per list of make mentioned in appendix `C

S&F in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistern etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C0117 of Parryware or Cat Part No 20042 of Hindware or equivalent make as per list of makes mentioned in appendix `C

S&F in repairs 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, all accessories etc complete all as specified and directed by Engineer-in-Charge. Make :- Sleek essence series of Hindware or Cat part No E8303 of Parryware or equivalent make as per list of make mentioned in appendix `C

S&F in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked etc complete all as specified and directed by Engineer-in-Charge Cat Part No 573 of Jaquare or its equivalent make as per list of make mentioned in appendix `C etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs looking mirror of size 800 mm X600 mm, etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No C 8601 Of Parryware or equivalent makes as per list of makes mentioned in appendix `C

S&F in repairs twin bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as directed. Make:- Cat part No MOR 1010(Oriental series) of MARC or equivalent make as per list of make mentioned in appendix `C

S&F in repairs decorative towel ring recangular chromium plated fixed with (CP) brass screws of approved qualityas specified Make : Cat Part No EG-7010 of Plumber or equivalent in Marc / ESS-ESS

S&F in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1020 A (Oriental series) of MARC or equivalent make as per list of makes mentioned in appendix `C'

M&L for preparation of old plastered treated surfaces of walls by brooming down and applying one coat of weather proof 100 % acrylic exterior emulsion apex ultima paint of any tint as approved by GE after cleaning the surfaces etc complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of old distempered and painted surfaces of walls and applying two coats of Luster (any tint) over etc complete all as specified and directed by Engineer-in-Charge

M&L for applying 2mm thick wall care putty on wall / ceiling etc complete all as specified and directed by Engineer-in-Charge.

M&L in repairs for coloured glazed ceramic tiles in vertical surface 300x450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs for machine cut kota stone slab flooring 20-25mm thick over 20 mm thick screed base in cement and sand (1:6) mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar including 15 mm thick backing coat in cemet and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs for 16mm to 18mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round molding the edge including 10 mm thick backing coat in CM (1:3) jointing & pointing in white cement (1:2 ) using marble dust with admixture of pigment to match the shade of granite rubbing including dismantling etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs for Machine cut cudappah stone slab 20-25mm thick over and including 15mm thick cement and sand screed in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M& L in repairs for 30 mm thick rough dressed Shahabad stone as in floor etc over and incl 15 mm thick screed base in cement and sand mortar (1:6) and pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs wall mixture , wall mounted with bend and over head shower etc complete all as specified and directed by Engineer-in-Charge Cat Part No MSH 1141 (for mixer) ,MSR 1090 (Over head shower)and MSH 1260 (Shower arm) of MARC OR its equivalent make in list of makes mentioned in appendix `C'

S&F in repairs stainless steel kitchen sink matt finish with draining over all size 950 X 510 mm and bowl size 410 X 410 X 230 mm, made out of SS sheet of high quality including a pair of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge. Make : (i) Model Olympia satin finish silent square range of Nirali or equivalent make in list of makes mentioned in appendix `C'

S&F in repairs stainless steel sink for kitchen including washer, waste pipes cast iron cantilever brackets, connecting union over all size 460 mm x 460 mm with bowl size 410 mm x 410 mm x 230 mm etc complete all as specified and directed by Engineer-in-Charge Make: Model Omni small make Nirali or equivalent make in list of makes mentioned in appendix `C'

M&L for cutting chases in brick/ block wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc complete all as specified and directed by Engineer-in-Charge

Supplying and laying 16 mm dia of CPVC pipes with all necessary fittings SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down etc complete all as specified and directed by Engineer-in-Charge

Supplying and laying 20 mm dia of CPVC pipes with all necessary fittings SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge

Supplying and laying 25 mm dia of CPVC pipes with all necessary fittings SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs stop cock cast copper alloy, Chromium plated fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1320(Oriental series) of MARC or equivalent make in list of makes mentioned in appendix `C'.

M&L for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished reinforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc and preparing the surface complete. and providing PCC (1:5:10) type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC (1:4:8) type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC vitreous china squatting pan 580x440mm with integral footrests/pedestal pan incl seat cover, white, area of WC n exc 1.50 Sqm etc after dismantling the existing sunken floor etc complete all as specified and directed by Engineer-in-Charge Make : Super Thermo lay MT of STP / TEXSA / FosRoc Note : Work has to be carried out strictly by the authenticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

S&F in repairs for PVC (SWR) floor trap, 75mm dia of outlet, with grating including joining to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) etc complete all as specified and directed by Engineer-in-Charge

M&L for cast iron Nahani trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) etc complete all as specified and directed by Engineer-in-Charge

M&L for opening the fittings like Y bend, T etc. from the outlet pipe, fills properly the loose joint between bend and out let pipe with solvent and fixing properly to ensure leakage free joint and plastering the hole of size of 50/75/110mm including taking out old unserviceable PVC/ CI fittings etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs cast iron floor trap with grating 75mm dia including jointing to waste pipe fixed in cement concrete type (1:2:4) type B1 using graded stone aggregate including removing old traps etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs plastic water closet seat cover, white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs 20mm dia chromium plated rods incl brackets etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs 60 mm thick, PCC pavers interlocking tiles of glossy finish, with grey cement any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5 mm graded mechanically crushed stone aggregates, factory made over and incl 30mm thick sand cushioning and joints filled with fine sand incl leveled with plate vibrator & sweeping etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1mm etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs 3 mm thick figured glass pin head type, and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows and wooden windows including glazing pins and wooden beadings etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs 3 mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows and wooden windows including glazing pins and wooden beadings etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs rotational moulded polyethylene water storage tanks double layer ISI marked (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipe and connecting etc complete all as specified and directed by Engineer-in-Charge

All as per item No. 77 (here-in-before) but 1000 ltr capacity

All as per item No. 77 (here-in-before) but 2000 ltr capacity

An amount of Rs 1,04,244.00 shall be deducted from BOQ on account of schedule of credit

M/s.Abhay Kulkarni and Associates

MS. G.A. CONSTRUCTION

M/S. M. F. Sharif & Co.

M/S MAHESHWARI ENTERPRISES

M/S-B.R.SONAWANE

OM SAI ASSOCIATES

M/s. Sagar Traders