Special repairs to MES Store T-546, T-542 and T-543 at Suranussi Mil Stn under AGE (I) Suranussi

Amount

Demolition of brick work built in cement mortar , including all quoins arces etc complete all as specified and directed.

Demolition of cement conc in ground floor and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed

Dismantling floor, hearth or wall tilling incl cement mortar bedding (but not backing), remvoving serviceable tiles to store and rubbis off the premises complete all as specified and directed.

Taking down cement or cement lime plaster of any description from walls, including racking out joints hacking for key scrubbing down with water etc , complete all as specified.

Taking down chowkats or frames with Shutters (without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site.

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm each and removing from site.

M & L cement concrete 1:2:4 type B–1 using 20mm graded stone aggregates as in flooring all as specified and directed by Engineer - in - Charge .

M&L brick work , with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius with old size bricks complete all as specified.

M&L for 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.

M&L for plaster for work 15mm thick cement plastering in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.

M&L non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in either white or coloured cement to match , over 15 mm th screed or bedding layer in CM 1:6 complete all as specified

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified

M&L 75 mm th cement conc type C-2,1:3:6 as in plinth protection with using 40 mm graded stone aggregate complete all as specified and directed

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165)

Supply & Fixing steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :- (i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window. (ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf. (iii) MS tower bolt 150 mm long-02 Nos each leaf. (iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf (v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf. (vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf. (vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame. (viii) Fabrication and fixing Note : Wire gauge shall be measured and paid for separately.

All as per item No 15 above but with Gauged shutter.

Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc with chowkhat. complete all as specified & directed by Engr -in- charge.

Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified & directed by Engr -in- charge.

Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified & directed by Engr -in- charge.

S&F 3mm thick sheet glass ordinary quality glazing with oil putty in square n.exc 0 .5sqm in each pane complete all as specified and directed.

S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm complete all as specified.

S & F mild steel butt hinges cold rolled of size 100mm medium weight.

S&F in repairs vitreous china urinals,flat back of size 465mmX355mmX 265mm, white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed.

S&F in repairs 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.

S&F in repairs 20 mmdia GI tubing and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.

S&F in repair pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge.

S&F in repair 15mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by engineer-in-charge.

S&F in repair 15mm size Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by engineer-in-charge.

S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

S&F in repairs Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed.

S&F of seat and cover for pedestal pan complete all as specified and directed.

M&L Preparing new surfaces of steel and applying two coats of Synthetic enamel over a coat of red oxide paint, complete all as specified and as directed.

.-ditto- all as per item No 49 above but on old surface.

M&L preparing surfaces old of wood and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for three coats of white wash on newly plastered surface incl preparation of surface complete all as specified and directed.

M&L preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of primer complete all as specified.

M&L preparing surfaces of old walls and applying one coats oil bound distemper.

M&L for preparation of new plastered surfaces of any description not otherwise description not otherwise described and applying two coats of cement base painting camouflaging pattern over a coat of primer on walls including preparation and cleaning the old surface etc complete all as specified and directed

Dismantling Ceiling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L 605mmX605mmsize anodised Aluminium snap grid frame work for false ceiling with aluminium angle 25X25X1.5mm th and Tee 25X35mmX1.5mm th and using 2mm GI wire adjustable as suspender in required length complete all as specified and as directed (Make - Armstrong) or equivalent.

M&L 12mm thick perforated particle board/tiles for insulation and acoustic purposes, 60X60cm in size, fixed in frame work/grid complete all as specified and directed.( Make - Armstrong) or equivalent.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings completed specified and directed by engr-in-charge complete all as specified and as directed

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedfixed with J type hooks as specified.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for 35 mm thick 2nd clas hard wood, , factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated as specified in SSR Part I section 8 clause 8.2(a) complete all as specified and as directed

M&L for 35mm thick IInd class Hard Wood glazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed

S&F solid PVC door frame of sie 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed

S&F 30mm thick factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed.

S&F 40mm th flush shutter solid core construction with block board core and plywood face panels commercial face on both faces complete all as specified and as directed.

Taking down carefully aluminum point wiring on TW Batten/in conduit / with conduit (light/Fan/socket or power) complete and making good the disturbed surfaces of wall/ceiling etc including taking down fittings such as switches, ceiling roses, pendants, Regulators, sockets, light fittings etc and removing material from site except tube light fittings, fans etc which shall be re-used in work complete all as directed .

Material and Labour for Concealed point wiring complete with 1.5 Sq.mm (nominal area) FR PVC insulated multi stranded copper conductor in and including heavy duty PVC conduit (wall thickness 1.6 mm) including fittings & accessories, with MS concealed terminal boxes with 3mm thick laminated bakelite ( Hylum/Anchor) sheet top cover for mounting switch, socket etc for one light/fan/bell point controlled by one switch and regulator with PVC cable copper conductor including 1.5 Sqmm solid copper conductor with green FR PVC insulation earth common earth dolly, complete all as specified . Make :Finolex/Havell's/Plaza/Indo Asian

All as per ser item 52 above but for 3 pin socket out let 5 Amps on same board complete all as specified and as directed.

All as per ser item 52 above but for 3 pin socket out let 5 Amps on independent board complete all as specified and as directed.

All as per srl item No 52 above but for 3 pin socket outlet 15 Amps with 2.5 Sqmm stranded copper conductor PVC unsheathed cable independent including PVC cable copper conductor 2.5 Sqmm with green insulator as earth wire with cast iron/pressed steel terminal box all as specified.

Supply and fixing switch piano flush type 5 Amp single pole one way. Make : Havells/SSK/Leader

Supply and fixing switch piano flush type 15 Amp single pole one way. Make : Havells/SSK/Leader

Supply and fixing socket outlet 5 pin 5 Amps flush type multi purpose. Make : Havells/SSK/Leader

Supply and fixing socket outlet multipurpose 2 in one, 6 pin 15Amps flush type. Make : Havells/SSK/Leader

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing ceiling rose surface bakelite 65 x 50mm three terminals complete. Make : Havells/SSK/Leader

Supply and Fixing fan regulator electronic step type and making connection. Make : Rallison/Leader/Bajaj

Supply and fixing sheet steel enclosure with double door, detachable gland plates flush/surface mounting for MCB’s fitted with bus bar, earth bar and neutral link 8 ways SPN 240 V Make : Indo Asian/Ship/Havell’s. Make : Standard/Havells/Ship

Supply and fixing MCB SPN 240 V, 40 Amps Make : Standard/Indo Asian/Havell’s.

Supply and fixing MCB SP 6 to 40 Amps 240 Volts. Make : Standard/Indo Asian/Havell’s.

Supply and fixing LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Material and Labour for submain wiring with two runs of single 4 sqmm PVC insulated unsheathed multistranded 1100 vols grade with copper conductor drawn through and including in steel conduit medium grade ISI marked and its accessories including one run of single core 4 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth contuinity conductor along with the wiring and connected from DB to DB/ main board completeall as specified and as correct.

Material and Labour for replacement of earthing with galvanized iron earth plate electrode 600mm x 600mm, 6mm thick buried directly in ground vertically in a earth pit not less than 2.25mtr below normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to GI earth wire 4mm dia by means of GI bolts, nuts, check nuts and washers (earth plate covered with alternate layers of charcoal dust and common salt 15cm thick), GI earth wire protected by GI pipe light grade 15 mm dia upto switch board and connected to main switch board including provision of GI pipe 20 mm dia light grade watering pipe with funnel and wire mesh, all as shown in Electrical Plate No. 3 of SSR Part-I, including PCC chamber (1:3:6) using 20mm graded stone aggregate and CI cover and frame including all necessary excavation and earth work and taking out old earthing complete all as specified and directed.

DUGGAL CONSTRUCTION CO

AAY KAY Constructions