Improvement of Old quarters Building into AEE O and M sub division office and AE O and M Town at Kodumudi 110KVSS premises

Amount

Chipping, clearing and removing the existing damaged flooring and laying the flooring with Double Charged Vitrified tiles of size 600X600X8mm approved quality and colour with ISI std and pointing with filling materials using 0.40kg/m2 including finishing the joint and pointing flush with tilesurface including cost of all materials,lead, lift, labour, curing etc., complete as directed by the engineer at site.

Dadooing walls with first quality design ceramic tiles 305mmx 305mmx6mm of approved colour and make quality of ISI std, laid in CM 1:2, 10mm thick and pointing with colour cement using 0.40kg/m2 including finishing the joint and pointing flush with tile surface including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete as per standard specification.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm X 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allolw leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.

Fabricating, supplying and fixing of structural steel safety grills using 12 mm square bar including two coats of enamal paint over one coat of red oxide primer coat including cost of steel and painting materials, lead, lift, labour, as per standard specification, etc., complete and as per instruction of Engineer at Site.

Supplying and fixing of PVC sliding shutters with roller of heavy duty PVC including cost of all materials, labour, lead, lift etc as per standard specification and approved colour as directed by the engineer at site.

Cement Solid Block in CM 1:5 using 15 cm cement Solid block for super structure and manhole including cost of all materials, labour charges, curing,scaffolding charges all leads and lifts etc., complete and as directed by Engineer.

Plastering with CM 1:5,12 mm including cost of cement for Inner/Outer walls including labour, curing, all leads and lifts etc., complete as per standard specification.

Supplying and fixing of Doors (Single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Iron anodized fittings, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour cost of all materials, leads, lifts labour, etc., complete as per standard specification.

White washing two coats for super structure wall with approved quality of White cement including cost of all materials, labour, leads & lifts and( pillars are blue,top boder blue, basement any one darck colour) as directed by Engineer at site.

Wiring with 2 x 1.5 Sq.mm PVC insulated single core unseathed copper conductor Cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with GI switch box in flush with wall with continuous earth line connection of 1.5 Sqmm wire and 6 A Switch 1 Module of open light point /Fan point.

Supply and fixing of LED fitting suitable for incandescent lamp 20 W LED bulb including cost of all materials, lead, lift, fixing charges etc., complete. ( Make: Philips )

Supplying and fixing of 1200mm (48”) sweep AC ceiling fan with 300 / 600 mm down rod with approved best quality make of standard specification with electronic regulators and switch including cost of all materials, labour, fixing, charges as per standard specification, etc., complete. (Make :Phl/ Crompton)

Labour charges for laying Lane cable with suitable PVC Rigid pipe of 25 mm dia on wall including cost of pipe, labour, lead, lift charges etc complete (Lane cable supplied by Departmentaly)

Supplying and fixing of 8 way two pole and natural MCB sheet steel enclosure distribution board with double door 1 No. 40 Amps,25Amps and 20Amps DPIC switch of 500V as incoming 24 Nos. 40 amps,25A and 25A SPMCB out going necessary on wall portion with earthy as per standard specification, etc., (SD167)

Supplying and fixing of modular socket 6A 3pin -4 Nos and 16A male top 1 No with 4 Nos switch with Frame with cover as per standard specification including cost of all materials, labour, lead, lift, etc complete.

Supply and run of 2 of 2.5 sqmm (36/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V Grade in suitable PVC flexiable pipe with continuous earth wire connection of 1.5sqmm wire.

Supplying and fixing of lane cable 2U rack networkway box of heavy duty including cost of all materials, labour, all lead, lift, as per standard specification, etc., complete.

Supplying and fixing in position of European water closet with p or s trap with double flapped seat and seat cover with brass hinges and 10 litre capacity PVC low level flushing tank of approved quality colour with all accessories including cost of all materials, labour charges all leads and lifts etc, complete and as directed by Engineer site.

Supplying and fixing in position of Wash Hand Basin of approved quality colour & size of 550X400mm with all accessories including cost of all materials, labour charges all leads and lifts etc, complete and as directed by Engineer site.

Supplying and fixing best quality of mirror of size 600x450mm mirror with SS soap tray, 600 mm SS towel rod, screw and fixing near the wash basin teak wood round block including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing of 25 mm dia PVC pipe 10Kg/cm2 (Shell thickness 2 to 3 mm) for water supply line, including cost of pipe, bend, elbow, labour for cutting, threading, and fixing in position, testing all materials, solution, lead, lift etc., complete.

Providing fixing 20 mm screw down PVC water supply tap including cost of pipe and labour fixing charges lead, lift, as per standard specification etc. complete

Flooring with Non-slippery Tiles of approved quality and colour, with CM 1:3 10mm thick over cement concrete flooring and pointing with same colured cement including cost of all materials, labour, lead, lift etc, complete as per specification and as directed by the engineer at site.

Painting the existing wood works for doors and windows cost etc with one coats of approved enamel paint over a existing painting including cost of scrapping all materials, labour, leads, lifts,etc complete

SGST For bidders within Tamilnadu

CGST For Bidders within Tamilnadu

IGST For Bidders outside of Tamilnadu

SBM CONSTRUCTIONS