REPLACEMENT OF FLOOR NEAR BUILDING No T 162 AT SI LINES UNDER GE BHOPAL

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Demolition of cement concrete of any description and in any position including flooring of any description complete all as specified and directed.

M&L for 25mm thick, PCC 1:2:4, type B0 using 12.5mm stone aggregate as in bedding layer for laying in floor as in levelling course complete all as specified and directed.

M&L reinforced cement concrete design mix, type A1 1:1.5:3 in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc ; basement slabs, under-ramed piles and mass concrete complete all as specified and directed.

M&L for TMT reinforcement bars 8mm and over, cut to length, bent to shape as required including cranking, bending spirally for hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securig with clips etc complete all as specified and directed.

M&L for non-skid vitrified ceramic tiles (matt finish) light shade of 10 mm thick (square/ rectagular) polished, area of each tile not exceeding 0.36 sqm as in floors etc., over and including 15mm screed bed or bedding layer in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified matt finish ceramic tiles, light shade 10 mm thick (square/ rectagular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc., over and including 15mm screed bed or bedding layer in CM 1:6 in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for heavy duty, vitrified, outdoor tiles minimum 10mm thick (square/rectangular) area of each tiles not exc 0.36 sqm, in floors set and jointed in neat cement slurry and fixed over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), omplete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick/concrete surfaces cement plaster in CM (1:4) , finished even and smooth without using extra cement complete all as specfified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite over and including 20mm screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 0.00

Please Enable Macros to View BoQ information