Improvement of HT/LT line under Capex Budget for the year 2021-22 in respect of JPDCL OM Division Kathua

Amount

Improvement of 11 KV Mahanpur -I feeder by way of Insertion/replacement of poles in longer spans, making of isolation points & replacement of worn out conductoron Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long ST Pole (410 SP33 )

Galvanised Channel Iron for x-arm

Galvanised Flate/Angle iron for clamps and braces

30 mm² ACSR Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Aluminium Paint

Red oxide paint

11KV GO set complete

Improvement of 11 KV Sandhar feeder by way of Insertion of poles in longer spans, making of isolation points & replacement of worn out conductor on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long ST Pole (410 SP33 )

Galvanised Channel Iron for x-arm

Galvanised Flate/Angle iron for clamps and braces

30 mm² ACSR Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Aluminium Paint

Red oxide paint

11KV GO set complete

Insertion of ST 8 mtrs Poles in longer Spans at Jandhrali (2 Nos.) Janu-I (2 nos.) Dodla (2 Nos.) Duck Aloon ( 2 nos.) Upper Shara (3 Nos.) Lower Shara (1 No.) Sandhar-II ( 1 No.) Sandhar-IV ( 2 No.) on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

8 Mtr. Long ST Pole (410 SP 15 )

GI Mukhi Clamp

Shackle Insulator

Galvanised Nuts and Bolts

30mm2 ACSR Weasel Conductor

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Improvement of 11 KV Bhoond feeder by way of Insertion of poles in longer spans, making of isolation points & replacement of worn out conductor on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long Pole(ST- 410 SP33 )

8 Mtr. Long Pole(ST- 410 SP 15) )

Galvanised Channel Iron for x-arm

Galvanised Flate/Angle iron for clamps and braces

30 mm² ACSR Conductor

Shackle insulator

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Aluminium Paint

Red oxide paint

11KV GO set complete

Improvement of 11 KV Basohli feeder by way of Insertion of poles & making of isolation points in longer spans on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long Pole(ST -410 SP33 )

Galvanised Channel Iron for x-arm

Galvanised Flate/Angle iron for clamps and braces

30 mm² ACSR Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Aluminium Paint

Red oxide paint

11KV GO set complete

Improvement of 11 KV Nagrota feeder by way of Insertion of poles in longer spans, making of isolation points & replacement of worn out conductor on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long Pole(ST- 410 SP33 )

Galvanised Channel Iron for x-arm

Galvanised Flate/Angle iron for clamps and braces

30 mm² ACSR Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Aluminium Paint

Red oxide paint

11KV GO set complete

Improvement of 11 KV Mashka feeder by way of Insertion of poles in longer spans, making of isolation points & replacement of worn out conductor on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long Pole(ST -410 SP33 )

Galvanised Channel Iron for x-arm

Galvanised Flate/Angle iron for clamps and braces

30 mm² ACSR Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Aluminium Paint

Red oxide paint

11KV GO set complete

Insertion of ST 8 mtrs Poles in longer Spans at Gadodi (2 Nos.) Tikri (2 nos.) Barmaid (1 No.) Saroga (3 Nos.) Kanih (2 Nos.) Siara (2 nos.) on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

ST pole 8 mtrs.long-410 SP 15

GI Mukhi Clamp

Shackle Insulator

Galvanised Nuts and Bolts

30mm2 ACSR Weasel Conductor

Improvement of 11 KV Mahanpur -II feeder by way of Insertion of poles in longer spans, making of isolation points & replacement of worn out conductor on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long Pole(ST -410 SP33 )

Galvanised Channel Iron for x-arm

Galvanised Flate/Angle iron for clamps and braces

30 mm² ACSR Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Aluminium Paint

Red oxide paint

11KV GO set complete

Insertion of ST 8 mtrs Poles in longer Spans at Rangoli (3 Nos.) Papral (2 nos.) on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

ST pole 8 mtrs.long-410 SP 15

GI Mukhi Clamp

Shackle Insulator

Galvanised Nuts and Bolts

30mm2 ACSR Weasel Conductor

Improvement of 11 KV Saman Jandrota feeder by way of Insertion of poles , making of isolation points & replacement of worn out conductor on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long Pole(ST -410 SP33 )

Galvanised Channel Iron for x-arm

Galvanised Flate/Angle iron for clamps and braces

30 mm² ACSR Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Aluminium Paint

Red oxide paint

11KV GO set complete

Insertion of ST 8 mtrs Poles in longer Spans at Saman Jandrota (7 Nos.) on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

ST pole 8 mtrs.long-410 SP 15

GI Mukhi Clamp

Shackle Insulator

Nuts and Bolts

30mm2 ACSR Weasel Conductor

Improvement of 11 KV Duggan feeder by way of Insertion of poles in longer spans,laying & stringing of 3rd phase of conductor,construction of Isolation points along with replacement of Damaged/worn out Hard ware fittings on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long Pole(ST -410 SP33 )

Galvanised Channel Iron for x-arm

Galvanised Flate/Angle iron for clamps and braces

30 mm² ACSR Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Stone pad (300mmx300mmx75mm)

Aluminium Jointing Sleeves

PG clamps for 30mm2 conductor.

Aluminium Paint

Red oxide paint

Improvement of 11 KV Bhandhar feeder by way of Insertion of poles in longer spans,Replacing of worn out conductor,construction of Isolation points along with replacement of Damaged/worn out Hard ware fittings on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

9 Mtr. Long Pole(ST -410 SP33 )

Galvanised Channel Iron for x-arm

Galvanised Flate/Angle iron for clamps and braces

30 mm² ACSR Conductor

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Aluminium Jointing Sleeves

PG clamps for 30mm2 conductor.

Aluminium Paint

Red oxide paint

11KV GO set complete

Improvement /Maintanace of Bhagthali feeder at Hatli Morh Nr. Jammu Motor on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material:

11 Mtr long ST poles (ST-410 SP56)

Channel/ Angle/Flat Iron for X arms, braces and Clamps

30 mm2 ACSR Weasel Conductor

11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm

11kV Polymeric composite Pin Insulator 12kV, 5kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Red oxide paint

Aluminium Paint

Cement bottoming 1:2:4 Mix as per REC Standars

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Guard netting

EMINENT ENGINEERING SEVICES

M/S LUMEN ENGINEERS