PETTY REPAIR DAY TO DAY MAINTENANCE AND REPAIR OF WATER PROOFING TREATMENT INCLUIDNG REPAIR OF PENT ROOF AND CONNECTED BR ITEMS IN ZONE I AREA OF AGE BR II UNDER GE NAGROTA

Amount

Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store, complete all as specified and directed.

M&L for 15mm dia bore galvanised steel water tubing of medium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for 20 mm dia bore galvanised steel water tubing of medium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting chases, pinning in making good to facings brick wall where required and pointing exc. 10 cm but n. exc 20 cm girth, complete all as specified and directed.

S&F 500 litres Capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including all accessories includind dismantling of old water storage tank, complete all as specified and directed.

S&F 1000 litres Capacity Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including all accessories includind dismantling of old water storage tank, complete all as specified and directed.

S&F in repair 20 mm bore gun metal gate/globe valves of ISI marked (IS-778 : 1984) with iron wheel head, screwed both ends for iron pipe of high pressure, complete all as specified and directed.

S&F in repair PVC cover/lid for PVC over head water tank suitable for capacity of 500 Ltrs and upto 1000 ltrs capacity complete all as specified and directed

Cleaning of water storage tank completely by removing all scale, dirt/dust of any description complete, all as directed at site and writing date of cleaning with synthetic enamel paint, tank of capacity ranging exc 250 ltrs upto and including 500 ltrs including dismantling and refixing if required, complete all as specified and directed.

All as per item No 10.00 here-in-before but of 1000 ltr cpacity.

S&F in repair Vitreous china wash basin, white, flat back, size 550X400 mm including waste pipe, bracket and cutting for and pinning in ends of brackets or errecting stand but excluding of fixing of supply and waste pipe, complete all as specified and directed

S&F in repair 15 mm pillar tap, chromium plated cast copper alloy, fancy type with capstan head, screwed down high pressure with and without levelled hot or cold with long screwed shanks and fly nuts screwed for pipe, complete all as specified and directed.

S&F in repair 15 mm bore bib tap, chromium plated cast copper alloy,screwed down,high pressure,with crutch or butterfly handle.screwed both ends for iron pipe or for brass ferrule, complete all as specified and directed by Engr-in-Charge.

S&F in repair 32 mm bore waste coupling brass, chromium plated for wash hand basin / sinks with long screwed shanks and fly nuts fixed. Complete all as specified and directed

S & F in repair 32 mm bore PVC waste pipe flexible including PVC waste coupling with minium length 800 mm, complete all as specified and directed.

S & F in repair 40 mm bore PVC waste pipe flexible including PVC waste coupling with minium length 800 mm, complete all as specified and directed.

S & F in repair 100 mm dia grating doom chromium plated complete all as specified and directed

S&F in repair 15 mm Stop/angle valves cromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down hight pressure screwed both ends for iron pipe or for union, complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts with length 600 mm long, complete all as specified and directed.

S&F in repair Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’ trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe, complete all as specified and directed.

S&F in repairs vitreous china squatting pan 'ORRISA' pattern, size 580x440mm white, with integral foot rest including provn of concrete bedding and connection to trap and flushing pipe antisyphonage pipe etc including making good to floor, complete all as specified and directed.

S & F in repairs 10 Ltrs capacity PVC valveles, less symphonic action type, flushing cistern low level, white with inlet, ball valve, float and handle including bracket, complete all as specified and directed.

S & F in repairs 1.00 mm thick stainless steel sink for kitchen or laboratory with plug, waste pipe, washers including bedding in cement mortar on to dwarf wall or fixing cantilever cast iron brackets connecting union etc., over all size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm with waste coupling, complete all as specified and directed

S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.

S&F in repair for EWC jet spray fixed under EWC seat cover, complete all as specified and directed.

S&F in repair 15 mm bore CP health faucet with tube & hook, complete all as specified and directed.

S&F in repair 15 mm bore CP wall mixure for cold and hot water screwed down for iron pipes, complete all as specified and directed.

S&F in reapir 15 mm bore CP central hole basin mixer, Complete all as specified and directed.

S&F in reapir 150 mm dia grating doom chromium plated, complete all as specified and directed.

S&F in repair 15 mm bib tap of PTMT any colour screwed down for iron pipe (minimum weight 90 gms), complete all as specified and directed.

S&F in repair 20 mm bib tap of PTMT any colour screwed down for iron pipe (minimum weight 125 gms), complete all as specified and directed.

S&F in repair 15 mm stop valve of PTMT, high pressure, any colour screwed down for iron pipe and fixed (minimum weight 90 gms), complete all as specified and directed.

S&F in repair 15 mm pillar tap of PTMT, high pressure, any clour screwed down for iron pipe and fixed (minimum weight 110 gms), complete all as specified and directed.

S & F in repairs 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 142 gms), complete all as specified and directed.

S&F in repair 600mm long PTMT towel rail fixed with and including chromium plated brass screw and wooden/plastic cleats (minimum weight 190 gms), complete all as specified and directed

S&F in repairs shower rose 125mm, CP, with otr without swivel joints, any size including fixing to steel pipe or union,complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue , anodised , with double rubber fixed Complete all as specified and directed

S&F in repair 150mm long mild steel helical door springs including roller plate, complete all as specified and directed.

S&F in repairs door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg , aluminium( Die cast) body, fixed in repair , complete all as specified and directed by Engr-in- Charge.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass , other parts made of mild steel heavy duty, complete all as specified and directed

S&F in repair brass mortice lock vertical type with 4 levers 100mm size with indcluding escutchon plate and two no. of keys fixed in repair, complete all as specified and directed

Taking down chowkat with shutter (without taking off shutter from the frame) not exceeding 1.5 sqm each (wood or steel), complete all as specified and as directed at site.

Taking down chowkat with shutter (without taking off shutter from the frame) exceeding 1.5 sqm but not exceeding 4 Sqm each complete all as specified and as directed at site.

Taking down shutters of any description exc 1.00 Sqm and n.exc. 2.00 Sqm each complete all as specified and as directed at site.

S & F factory made solid PVC door frame of size 50mm x 47mm ,made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing, complete all as specified and directed.

S & F 30 mm thick (style) Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F MS holdfast made up of FI 25 x3 mm conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed

Pressed steel door frame of size 125 mm x 60 mm with one or more rebates using 1.25 mm thick PBI sheet including necessary fixing lugs, lock strike plate , complete all as specified and directed.

All as per item No.51.00 here-in-before but 105x60 mm.

S & F 35 mm thick first class hard wood, factory made, glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

S & F 35 mm thick second class hard wood, factory made, paneled shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamered or rounded, fitted with cut and mitred beads for securing glass, etc. Size of memebers of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors, complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.

S & F 100 mm long butt hinges, medium weight, cold rolled mild steel fixed with screws or welding , complete all as specified and directed.

S & F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S&F 150 mm aluminium handles cast type anodized, complete all as specified and directed.

S & F in repair 150 mm aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

S & F in repair 150 mm aluminium handles cast type anodized, complete all as specified and directed.

S & F in repair 250 mm long MS sliding door bolts clamps type stove enameled (ISI marked)black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plates and two on staple plate, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shuters of any description exc 1.0 sqm and n.exc 2.0 sqm, complete all as specified and directed.

M & L for Prepration of new wooden surfaces any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Aluminium anodised frame work as in partition wall/ doors/windows/ ventilators/sliding shutters by using suitable sectin conforming to IS-733 and IS-1285 and coating grade A-153 conforming to IS-1866 & fixed with rawl plug and screws or with fixing clips with expansion hold fastners including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap grid beading etc gap of junction at top an bottom and sides filled with PVC Neoprene felt including necessary provision of aluminium grills to windows/ventilators etc, complete all as specified and directed.

S & F in repair Galvanised mild steel wire 0.56 mm nominal dia of wire and average width of aperture 1.18 mm dia and fixed with tinned tacks or galvanised mild steel staples to all door/wubdiw/vent shutters, complete all as specified and directed.

Box type steel window side hung double shutters with provision for desert cooler/AC (Inside for wire mesh & outside for glass), including guard bar hinges, steel handle, tower bolt and steel peg stay complete with glazaing bar dovetailed for welded and fixed steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 including taking down of existing steel windows, complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured and paid separately.

Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS, complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured and paid separteley.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M & L for Rendering 10mm thick plastering in cement mortar 1:3 on fair faces of brick/concrete surfaces finished rough for fixing of wall tiles complete all as specified and directed.

M & L for Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade including 15mm thick screed bed in cement mortar 1:4 , complete all as specified and directed.

M & L for Glazed ceramic coloured tiles (first quality) of size 450x300x7mm thick as in vertical surface,set in neat cement slurry and poined in white or coloured cement including 10 mm thick screed bed in cement mortar 1:4, complete all as specified and directed

M & L for 10 mm thick Vitrified Ceramic tiles, Light shade, (square/rectangle) Polished area of each tile not exc 0.36 sqm, in floor in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in sub base of floor surface finished even and fair to receive top layer all as specified.

Demolition of concrete (unreinforced) of any description and in any position not otherewise specifically provided for, complete all as specified and directed.

Hacking out old broken glass (any thickness, size , quality or description) from wooden frames or stone concrete or brick surrounds , glazed with putty or fised with beads complete all as specified and directed

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane, complete all as specified.and directed

S&F 4 mm thick figured glass pin head and glazing with oil putty in square n. exc 0.5 sqm in each pane, complete all as specified.and directed

S&F for 5.5 mm sheet glass, ordinary quality in squares exc 0.5 sqm each pane, complete all as specified.and directed

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fitting heads, shoes, bends, swan necks etc. including cleaning or refixing or removal to store (measured over all as fixed along the centre line over fittings and accessories), complete all as specified and directed

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F in repair 110 mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed

S&F in repair 110mm bore PVC (SWR) Bends any radius complete all as specified and directed

S&F in repair 15 mm bore PVC connection with brass coupling nuts of size 15 mm and 450mm long complete all as specified and directed

Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

S&F in repair 25 mm dia aluminium anodised drappery rod powder coated teak wood texture finish and wall thickness 1mm with wooden brackets and end cup, complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water complete all as specified.and directed

M & L for 15 mm thick rendering on fair faces/other than fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered surface of wall and applying minimum 2 to 3 mm thick wall putty and applying two coats of oil bound distemper over one coat of primer , complete all as specified and directed.

Preparation of new plasteredor unplastered surfaces of wall and applying two coats cement base paint over a coat of primer, complete all as specified and directed.

Attending compliant related to carpenter/welder work includes repair and easening of doors, refixing or retightening of doors, windows, resecuring of door/window wire gauge, welding work, etc including nails, screws, rawl plug and fevicol, welding rod etc required to make good the work to atend the complaint (Replacement of hinges , door, window shutter glass panes, wire gauze shall be paid saperately), complete all as specified and directed.

Attending compliant related to plumber/water supply and obtaining completion from user includes minor repair of taps by replacement of washer/jumper, tightening of taps, tightening of check nuts of PVC connection and making water supply functional in case of blockage, redressing of GI pipe joints if any leakage is found, repair of unfunctional PVC flushing cistern, reapair/replacement of face mohra etc including materials like GI fittings of reqd size M. Seal, safeda, sootar and washers etc.complete all as specified and directed

S & F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

M & L for 100 mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in sub base , complete all as specified and directed.

M&L for 20 to 22mm thick cement concrete chequered tiles, glossy finish, coloured, of any size and pattern as approved by GE as in patches in floor with set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering, complete all as specified and directed

S & F prepainted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

Dismantling wrought iron or mild steel work in any description, complete all as specified and directed.

M&L for mild steel rolled work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. , conforming to grade Fe 410-S, complete all as specified and directed.

S&F wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire , etc., including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe-290 Gde E-165 complete, all as specified .

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified.

Preparation of new steel and iron surfaces not exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified.

M&L for preparation of old steel and iron surfaces of any description, exceeding 10 cms in width or girth and applying two coat of synthetic enamel paint complete all as specified.

GI T Grid system in 600 x 600 mm module which includes providing and fixing wall angle along the perimeter of the room with nylon sleeves and wooden screws at 300 mm centre to center. Suspendeding the main tee of size from the soffit, soffit cleat, rawl plugs and wire rod & leveling spring clip at 1200mm center to center cross tee, interlockined into the pre-cut slots in the main tees at 600 mm centre to center in direction perpendicular to the main tee to make a grid of 600x 1200mm. Finally 600 mm cross tees are interlocked in the pre cut slots in the 1200mm tees at 1200 mm center to center in direction parallel to the main tee. Cross Tees having length more than 600 mm are to be supported independently. 4.5 mm thick E board with square edge of size 595x595 mm shall be placed into the grid size of 600x600mm. Size of grid as specifed by manufactures, complete all as specified and directed.

Rendering 10 mm thick cement plaster in cement mortor 1:6 on fair faces of brick work even and smooth without using extra cement complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in padding surface finished even and fair to receive top layer complete all as specified and directed.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq m including cleaning surfaces complete all as specified and directed .

APP (atatic polypropline) modified membrane 3mm thick minimum weight not less than 3kg/sqm with 160 gsm/Sqm, non wove polister mat as centre core reinforced laid with 75mm side overlap and 100mm end overlap. The memberance has to be laid with LPG torch and over lap shield and finished neat over roof including a coat of bitumen 85/25 @ 1.2 Kg/Sqm over APP memberance and fixed of broken glazed tiles and grouting with mixture of white cement and marble powder over roof complete all as specified and directed.

M&L for Plain cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) as in coping, bed plates, kerbs and the like benching, including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed

M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed, set jointed and pointed in neat cement slurry and roof over APP membrance laid over 15mm thick cement screed bed in cement mortar 1:6 all as specified and directed.

Dismantling brick tiles or terracing tiles Single Layer on roof including cleaning the roof surface and filling the cracks (if observed) with silicon compound, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ 55,525.00 during AOC Note:- Tenderers shall not quote for this Schedule

M/S MANISHA BUILDERS

M/S AJAY SINGH CONTRACTORS