PROVN OF TRAINING AND OFFICE ROOM FOR DET 7 P AND SU AT AF STN JAISALMER

Amount

Surface excavation not exc 30 cm and averaging 15 cm deep and getting out in any type of soil, all as specified.

Excavating in trenches, soft and loose soil, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil as directed.

Excavating in trenches, soft/ disintegrated rock exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in any type of soil as directed.

Returning , filling in including in spreading ,leveling,watering and well raamming in layers.n exc 25 cm as specified.

Removing excavated material soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wal

M&L for 1:4:8 type D2 (40mm graded aggrage) cement concrete in foundation, filling and mass concrete.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as directed.

M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, flat and rough finished surfaces of concrete; vertical or to batter.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, of square, rectangular or polygonal shape and rough finished surfaces of concrete.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, flat and rough finished surfaces of concrete; not exceeding 200mm thick (Horizontal or sloping).

Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat and rough finished surfaces of concrete .

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, flat and rough finished surfaces of concrete.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similarwork exc 10cm but n exc 20cm wide rough finished surfaces of concrete .

M&L for reinforced cement concrete (design mix) M-25 (20mm graded aggregates) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete as directed.

M&L for reinforced cement concrete (design mix) M-25 (20mm graded aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like as directed.

M&L 75 mm thick DPC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) laying in alternate ways finished even and fair without using extra cement all as specified.

M&L for reinforced cement concrete (design mix) M-25 (20mm graded aggregates) in chajjas as directed.

M&L for reinforced cement concrete (design mix) M-25 (20mm graded aggregates) in beams, cantilevers, bressummers, lintels over 1.5m span as directed.

M&L for reinforced cement (design Mix M-25) 20mm graded aggregate for columns, pillars, piers, posts and struts as directed.

M&L Pre-cast cement concrete block type C-1 (1:3:6) masonry with solid blocks, exc. 10 cm in width and setting in Cement mortar 1:6 , complete

M&L for 10mm thick cement screed in cement mortar 1:3, including finishing even and smooth with out using extra cement to receive roof treatment, mixed with water proofing compound @3% by weight of cement over cleaned roof surface, as in grading to RCC roof surface,complete all as specified. Note - The rate qouted decided including the amt for liquide water proofing material.

M & L for water proofing treatment of roof slab all as followes: - (a) M&L for preparation of roof surfaces by brushing, cleaning and Applying a priming coat with bitumen primer @ 0.5 ltr/Sqm (b) Applying a hot blown bitumen grade 85/25 @ 1.2 Kg/sqm (c) Laying APP modified water proofing membrane weighing not less than 3 Kg/Sqm will be laid over applied bitumen. (d) Applying a tack coat of hot bitumen grade 85/25 @ 1.2 Kg/Sqm and sand in confirming to Zone II in dry condition will be dusted over the bitumen @1.00 Kg/Sqm. (e) Aluminium primer @ 100 gm/Sqm on top

M & L PCC (1:2:4) type B-O using 12.5mm graded stone aggregate as in Roof padding, roof kerbs of mud stops or similar work maintain proper slope as requred as specified .

M&L for 100 mm thick plain cement concrete1:4:8 type D-2 (40 mm graded aggregates) for level course as per direction of engr-in-charge,

M&L coloured glazed ceramic tiles in dado/skirting 450x350x7mm/350x250x7mm thick over 10mm thick CM (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile.

M&L coloured Non Skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floors etc over 15mm thick CM (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile.

M&L Double charged Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

All as per item No above but As skirting

M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 20mm thick screed bed CM (1:6) complete all as specified and directed.

M&L Machine cut kota stone 12 to 15 mm thick as in riser of step, skirting,dado and pillar etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing laid over and including 15mm thick rendering CM (1:4) complete all as specified and directed.

M&L for 10mm thick plaster in CM (1:6) on internal fair faces of brickwork or concrete surfaces finished even and smooth (without using extra cement) as directed.

M&L for 5 mm thick plaster in CM (1:3) on ceiling finished even and smooth (without using extra cement) as directed.

M&L for 15mm thick external plaster in CM (1:6) on fair faces of brick, block work or concrete surfaces finished even and smooth (without using extra cement) as directed (Liquid water proofing compound as per mfg instructions the rate quoted decided to including amt for water proofing compond.)

M&L for preparation of surfaces newly plastered wall surfaces and applying two coats of acrylic washable distemper over one coat of wall primer over two layer of wall care putty on walls beams, etc of approved tint as directed.

M&L for preparation of newly plastered ceiling surfaces and applying two coats of acrylic washable distemper over a coat of primer including two of wall care putty etc of approved tint as directed.

M&L for preparation of newly plastered external wall surfaces and applying two coats of plastic paint over one coat of primer of approved tint over alkali resistant primer.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

Mild steel farmed work as in doors (as in ckowkats/frame structure) or gates of angle or other section with guest plates rail, brasses rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-290 including shop coat of red oxide including prepration of surface before fixing complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood (Hollock/Sal/Bijasal), locally febricated glazed skeleton door shutters open rebated and prepare to receive glass, gauge (without sash bars) edges of framing plain chamfered or rounded, fitted with cut including mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8, clause No 8.24 (a) complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II)

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamealle paint over a coat of pink primer. complete all as specified and as directed.

M & L for prepariation of newly steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

S&F Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S & F mild steel 300mm, halical door spring including roller and roller plate complete all as spd and dir.

S&F 25mm dia stainless steel curtain rod with fancy type sides cups and brackets all as specified and directed by Engr-in-Charge, sample kept in GE office

S&F 35mm factory made second class hard wood 35 mm thick plain framed, panneled framed panneled shutter ( two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both side face specification complete all as specified and directed by Engr-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame/shutter work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including roller for sliding window, handle, locking device, door stopper, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F powder coated anodised aluminium expanded metal mesh of any size/shape for window/ventilator fixed in Aluminium frame with aluminium snap beading, screws etc. all as specified and directed.

S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with aluminium snap beading.

S&F Aluminium anodised barrel tower bolt of extruded section 150mm size.

S&F Aluminium alloy, anodised sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel, and fixed as directed.

S&F 125mm size anodised extruded aluminium alloy handle fabricated type.

S&F aluminium (extruded section body) door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000mm in width.

S&F 15mm bore cast copper alloy, with capstan heads, chromium plated pillar taps with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed down for iron pipes etc complete all as directed..

S&F 15mm size cast copper alloy, chromium plated stop,angle valves screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes etc complete all as directed.

S&F white coloured vitreous china urinal half stall type with 32mm size brass chromium plated waste coupling with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.

S&F Single piece type EWC of any make closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed as with all pluming fittingscomplete all as specified and directed.

M&L for 20 mm thick Granite platforms and like in 15 mm thick cement morter (1:6) screed bed including pointing in match cement (1:2) using Marble dust with admixture of pigment to match with shade of Granite including cutting/polishing to accommodate counter basin & polishing to edges.

M&L for Rounding to edges of stone slabs one edge such as in steps,cooking platform,and other similer situations

S&F under counter wash basin Oval/rectangular/ square shape of size (560x450)mm white colour excluding taps, complete all as specified and as directed.

S&F steel water tubing `medium grade’ galvanized 25 mm bore with all fittings and fixed complete to walls and ceiling concealed and joints fixed with adhesive complete all as specified & directed.

S&F 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and as directed.

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges.

S&F PVC connection 15mm size with PTMT nuts of length 600mm.

S&F LDPE waste pipes of 32mm bore pressure rating 6 Kgf/Sqcm for wash basin,urinal as specified.

S & F PVC (SWR) floor trap with out let 75mm dia plain with grating including jointing with solvent cement.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms).

S&F 500 ltrs capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR I as directed.

S&F 20mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed as directed.

S&F Stainless steel grating doom, 125mm dia fixed all as specified.

S&F 15mm bore cast copper alloy, chromium plated bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as approved an directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all asspecified.

Supplying and laying of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all asspecified.

S&F PVC (SWR) 110 mm dia pipes single socketed in any length with rubber ring joints fixed to walls with suitable fixtures.

S&F PVC (SWR) bends any radii for 110 mm dia pipe.

S&F PVC (SWR) junction single, (Single T) equal or unequal for 110 mm dia pipe.

M&L for broken stone or boulders hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L for 75mm thick cement concrete type C-2 1:3:6 using 40 mm graded stone aggregate as in for plinth protection.

M&L for concrete bed to drain pipes laid in trenches including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40mm graded aggregate) for 150mm bore pipe all as directed.

M&L for reinforced concrete 150mm dia pipes, class NP2, laid and jointed complete with collars, laid on concrete bed including testing as specified and directed.

Cutting into existing manholes/septic tank for connecting new drain pipe of 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required and directed.

S&F factory made SFRC manhole covers with rectangular frame of size 44"x26" MD-10 fixed at top at site complete all as spd and diredted

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

M&L for sand filling under floors, in foundations or to true level under paver tile hardstanding including watering and consolidation complete all as specified and as directed.

M&L for M-35 Grade 60mm thick with grey cement and pigment factory made precast concrete interlocking paver block any shape and size conforming to IS 15658-2006.

M&L for concealed conduit point wiring controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit 25 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLSH copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly including sunken box for modular fitting complete all as specified and directed. One light point controlled by one, one way switch

-Ditto- all item as per Ser No 97 above but One fan/exhaust fan point controlled by one, one way switch

-Ditto- all item as per Ser No 97 above but One socket outlet 3 Pin, 6 Amp on independent board

-Ditto- all item as per Ser No 97 above butOne socket outlet 3 Pin, 6 Amp on same board.

All as per SI item no 1 herein before but with 4 sqmm for phase &neutral and 4 sqmm for earth wire for socket out let 15 Amps on independent board.

S&F Modular switch 6 Amp 250 V AC one way one module complete all as specified and directed.

S&F Modular switch 20 Amp 250 V AC one way with indicator one module complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F modular Fan regulator step type, 120W - 2 module complete all as specified and directed.

Supply and fix Metal flush mounting box of 3 Module complete all as specified and as directed.

Supply and fix Metal flush mounting box of 4 Module complete all as specified and as directed.

Supply and fix Metal flush mounting box of 6 Module complete all as specified and as directed.

Supply and fix white colour plates with frame for modular switch and socket of 03 module complete all as specified and as directed.

Supply and fix white colour plates with frame for modular switch and socket of 04 module complete all as specified and as directed.

Supply and fix white colour plates with frame for modular switch and socket of 06 module complete all as specified and as directed.

Supply and fix white colour plates with frame for modular switch and socket of 08 module complete all as specified and as directed.

S&F Modular AC Socket and heavy duty plug with metal box for AC, 3 Module, Single Pole MCB not less than 20 Amps, repturing capacity 10 kA including taking down old unserviceable complete all as specified and directed.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked)

Supply and fixing Surface and wall mounted LED tube light fittings of cap 10W , Two feet Basic all purpose surface and wall mounted LED batten with polycarbonate housing including taking down with all as specified and directed.

S & F 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole (SP) and current carrying capacity 6 to 32 Amp, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

S & F 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole and neutral (SPN) and current carrying capacity 32 Amp, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

S & F 240V, 10KA 'C' curve miniature circuit breaker (MCB) of triple pole and neutral (TPN) and current carrying capacity 63 Amp, in the MCB DB Complete with connection testing and commissioning all as specified and directed.

Supply & fix Prewired Distribution Board factory made sheet metal enclosure double door distribution board class IP-43 IK 09 with 200 Amp rated bus bar 240 Volts 8 way single pole and neutral complete all as directed by Engineer-in-Charge.

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLSH wire 6.00 Sq mm 1100 volts grade including and 06.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC conduit incl cutting, chases in stone wall and match with the existing surface complete all as specified and directed. Note : Two run of 06.0 Sqmm cable and one run of 6.0 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Supply,hang,fix and connect ceiling fan complete with blades,down rods, electronic regulator and accessories,230 V, 1200 mm sweep Min air delivery 210 CFM with service value 6.00 BEE.Five star rated with brushless direct current motor (BLDC) complete all as specified directed.

S & F exhaust fan, steel body AC single Phase. 230 V of size 300mm sweep with blades and frame and louvers complete all as specified and directed.

S & F LED street light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver lamp bracket with impact and corrosion resitant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing Surface and wall mounted LED tube light fittings of cap 20W , four feet Basic all purpose surface and wall mounted LED batten with polycarbonate housing including taking down with all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) Item includes the cost of 7.50m GI pipe for protection of earth wire/strip Any variation in length shall be adjusted through deviation order. (iii) Item includes cost of 7.50m earth lead wire/strip. Any variation in length shall be adjusted through deviation order. (iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation etc or for laying of cables, pipes, erection of poles, structs/stays etc not exceeding 10 sqm and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified.

Removal of excavated soil/ material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified.

Supply and Laying of HDPE DWC pipe dia 40/32mm (outter/inner) with including fitting like couplers, bends, and end caps and etc consists of two layer, The outer layer smooth to facilitate easy cable pulling, Primarily used for underground cable ducting for electrical networks to provide mechanical protection with standards IS:16205 (Part-24) 2017 all as specified and directed by Engr-in-charge.

Chari revolving executive with arms High Back (TP)

Sofa Set 5 Seater

Table Centre glass top

Table office officer

KHUSBU CONSTRUCTION COMPANY (BID ID -3513400)

SUMIT ENTERPRISES (BID ID -3507960)