SPECIAL REPAIR TO ROOF AND OFFICE CUPBOARDS IN BLDG NO CMH-3 (MAIN OFFICE) AND CMH-4 (QM OFFICE) AT MIL STN MOUNT ABU

Amount

Dismantling of Manglore pattern or similar tiles in roofing.

Dismantling of timber battens for tiles of any size including tilting fillets spaced exc. 15 cm etc.

Supply & Fixing Manglore pattern tiles in roofing interlocking at side joints, laid dry.

Refixing old Manglore pattern tiles in roofing interlocking at side joints, laid dry.

Supply & Fixing ridge or hips tiles to suit Manglore pattern roofing tiles bedded and jointed in cement mortar 1:6 etc.

Dismantling of timber scantling 40 sqcm and over in sections in any position in unframed works.

Dismantling of timber scantling below 40 sqcm in sections in fillets, rails, rafters, purlins etc.

Material & Labour for IInd class hardwood battens clean sawn at 30cm centres and sectional area exc. 5 sqcm & not exc. 15 sqcm over & including one coat of creosote oiling on battens complete.

Material & Labour for second class hardwood (SAL) scantling clean swan in unframed work as in rafters, purlins & trusses etc all as specified and directed complete.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

Supply & Fixing galvanised 0.63 mm thick corrugated mild steel sheeting class 8 with two corrugations side lap fixed with L-type or J-type screws in roofs coering

Fixing only CGI sheeting of any gauge with two corrugation side lap fixed with 'L' or 'J' hooks in roofs including cup washer etc complete all as directed.

Supply & Fixing 0.80 mm thick plain galvanised mild steel sheeting in eves board, ridges, hips, valley gutters, drip and straight flashings class 8 with two corrugations side lap fixed with L-type or J-type screws in roofs

Material & Labour for rolled mild steel sections in rafters, purlins and posts or hollow square pipe as in tiles battens/ purlins, nut bolts etc . where connected to common rafters and runnuing rails fixed with angle cleats or other connecting plates and nut, bolts etc. confirnimg to Fe-290 (Gde E-165).

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast con-crete articles

M/L for brick work with kiln burnt bricks built in cm (1:6) using sub class 'B' bricks of compressive strength not less than 35 Kg/Sqcm straight or curved on plan exceeding 6 mtr mean radius with old size bricks all shown on drawing and as specified.

Taking down cement plaster on brick/stone walls etc including raking out joint, hacking for key scrubbing down with water etc.

Material & Labour for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in fdn, surface channel,cills copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges complete.

Material and labour for new or old roof Manglore pattern tiles or any other any pattern by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorecent salts and trading oil and greasy spots, cleaning with water etc. and applying two coats Indigo roof tiles coat premium series or eq. over a coat of primer complete all as specified and directed.

Material and Labour for 10mm thick rendering on fair faces of brick work, concrete surfaces or stone walls surface finished even in cement morar 1:4 finished even and smooth without using extra cement complete all as specified.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces or stone walls in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions, finished even and fair, complete all as specified. Note : (i) WPC shall be measured and paid separately. (ii) Rendering upto 9 mtr ht shall be included in the quoted rate).

Material & Labour two coat of exterior emulsion paint coloured on walls over one coat primer all as spd & directed.

Material & Labour one coat of oil bound distemper (acrylic) white or tinted over old decorated surfaces of walls etc.

Material & Labour for applying 1 mm thick weather coat Asian/Birla/JK wall care white putty in two layers white wall care putty on complete removal of existing treatment externl or internal walls complete all as specified and directed.

Material & Labour two coats of oil bound distemper (acrylic) white or tinted over and including prepared putty surfaces of walls etc.

Material & Labour one coat of exterior emulsion paint coloured on old decorated surfaces of walls incluing ppreparation of old surfaces etc. all as spd & directed.

Material & Labour for Medium density fibre (MDF) board, 12 mm thick, exterior grade, prelaminated both side decorative face, fixed to timber framework with screws for cupboards fixed complete.

Supply & fixed Continious piano hinges, continuous type of mild steel bright finish or electro galvanized with width of flap (when open) 30mm complete all as specified.

Supply & fixed 75mm long stainless steel handle fixed with nut and screws to cupboard shutter complete all as specified and directed.

Supply & fixed magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, complete all as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

Suspended false ceiling system using Chicago metallic (E - grid) exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 mm+ PPPCGS/0.3 mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm & weight of Tee 0.195 kg for 600mm length) and Wall angle of dimensions 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI / 0.35mm + PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length) with and including 4mm thick HPSC (High pressure steam cured) pre primed, self embossed, textured designer board to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed.

Taking down carefully aluminum/copper point wiring (light/fan/socket/power) complete including fittings such as switch, socket, ceiling roses light fittings etc and and making good disturbed surface of wall all as specified and directed by Engineer-in-Charge. (Serviceable light fitting to be kept separately for re-use).

Material & Labour for point wiring 1.5 Sqmm nominal area PVC insulated and unsheathed multistranded copper conductor FRLS in PVC concealed concuit with suitable metal box and hylem sheets with multistranded insulated solid copper earth continuity conductor of size 1.5 sq mm complete all as specified and directed by Engr-in-Charge :-

(a) One light point controlled by one switch one way

(b) One fan/exhaust fan point controlled by one switch one way

(c) One socket out let 5 Amps 5 pin on independent board

(d) One socket out let 5 Amps 5 Pin on same board with other switch

All as per item No 2 here in before but with cable size 2.5 Sqmm for one 5 pin 15 Amps socket out let on independent board and multistanded insulated solid copper earth continuity conductor of size 1.0 Sq mm all as specified and directed by Engr-in-Charge.

Supply & Fixing switch piano flush type 5 Amps single pole one way. Make:Cona/Anchor/Havells

Supply & Fixing socket out let 2 in 1 multi pin 5 Amps flush type universal. Make:Cona/Anchor/Havells

Supply & Fixing switch socket combination 2 in 1, multi pin 5 Amps flush type universal. Make:Cona/Anchor/Havells

Supply & Fixing switch socket combination 2 in 1, multi pin 5 Amps/15 Amps flush type universal.

Supply & Fixing Ceilling rose on PVC board size 65 X 50 mm three terminal Complete. Make:Cona/Anchor/Havells

Supply & Fixing Angle holder backelite complete all as specified.Make:Anchor/ Philips/Cona

Supply & Fixing fan regulator electronic step type, 230 volt , 50 Hz complete all as specified. Make:Cona/Anchor/Havells

Supply & Fixing MCB single pole, Curve 'C' 240 volts 5 to 32 Amps complete all as specified. Make Havells/ Legrand/L&T.

Supply & Fixing MCB single pole and neutral, Curve 'C' 240 volts 32 Amps complete all as specified. Make Havells/ Legrand/L&T.

Supply & Fixing MCB single pole and neutral, Curve 'C' 240 volts 40 to 63 Amps complete all as specified. Make Havells/ Legrand/L&T.

Supply & Fixing MCB DB SPN 8 way (double door) with 200 Amps rated bas bar, neutral link, earth bar and Din rail double door complete all as specified. Make Havells/ Legrand/L&T.

Supply & Fixing MCB DB TPN 04 way (double door) with 200 Amps rated bas bar, neutral link, earth bar and Din rail complete all as specified. Make Havells/ Legrand/L&T.

Material & Labour for sub main wiring with 2 x 4 Sqmm copper conductor (Multistandered) 1x4 sqmm copper conductor wire as earth continuity in PVC counduit all as directed.

Supply & Fixing sheet metal enclosure with socket plug top and MCB 20amp 240v complete all as specified. Make Havells/ Legrand/L&T.

Supply & Fixing LED LED light fittings 1x18 watt, 220 volt, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductore cable of suitable size from ceiling rose complete.

Hanging only ceiling Fan (MD supply) and connectiong up including provision of cable from ceiling rose or connector to fan.

M/s ESS KAY Construction

Suchit constructions

J.J.ENGINEERING

Haritwal traders

M/s B. S. Solanki Builders

M/S Balkishan Panwar Construction

boon construction company