Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC WZ 1043 C IIND FLOOR NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC L1 | |
| 2 | L2₹32.1 L+₹3.6 L (12.5%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹32.4 L+₹3.9 L (13.8%)Rejected-Finance WZ K 173 4 1ST FLOOR NEAR SABZI MANDI NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹32.6 L+₹4.1 L (14.4%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹33.0 L+₹4.5 L (15.8%)Rejected-Finance RZ D 29A GALI NO 05 SYNDICATE ENCLAVE NEAR DABRI MORE NEW DELHI 110045 | SOUTH WEST DELHI | DELHI | 110045 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹43.8 L
EMD Value
₹87,520
Closing Date
1 May 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Delhi Cantt-10
GE North Delhi Cantt-10
PROVN OF GALVALUME ROOF SHEETS ALONGWITH REPAIR TO ALLIED STRUCTURAL MEMBERS IN P 18 MAUDE ROAD UNDER GE NORTH DELHI CANTT 10
2023_MES_589044_1
GE/NORTH-02/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE North Delhi Cantt-10
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE North Delhi Cantt-10
₹87,520
Yes
9 May 2023
11 Apr 2023
3 May 2023
11 Apr 2023
1 May 2023
25 Apr 2023
Amount
B/R Portion:- Cutting openings, through brick walls built in CM for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc.50m complete all as specified and directed .
Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in CM 1:4, complete all as specified and directed .
Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed .
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM 1:6, complete all as specified and directed.
All as per the description of Srl item No 4 above, but except bricks.
Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.
M&L for 15mm thick Ready mix Cement Plaster work on faces of brick work or concrete surfaces in External Surfaces mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separatelly.
M&L for preparation of new plastered surface of external wall and making the surface smooth with sand paper and priming the surface wih alkali resistance priming paint for external surface for primed surface applying two coats of cement base paint including curing complete all as specified and directed .
M&L for 15mm thick Ready mix Cement Plaster work on faces of brick work or concrete surfaces in internal surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed .
M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer and 3mm thick of wall care putty of make birla/JK, all as specfied and directed.
M&L for preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.
M&L for rendering 5mm thick Ready mix Cement Plaster on concrete surface as in ceiling/chajja and rainforced cement concret surfaces complete all as specified and directed.
M&L for preparation of new plastered surfaces as on ceiling and applying two coats of white wash, complete all as specified and directed. (Up to 6 mtr height )
Demolition of Cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.
M&L 40mm thick plain cement concrete 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate) as in floors finished even and smooth using extra cement complete all as specified and directed.
Supply only glass diving strips 3mm thick and 38mm width inserted in position, confirm to design, complete all as specified and directed.
Plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).
M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate, 75mm thick as in sub base complete all as directed and specified
M&L machine precast colour concrete decorative interlocking paver block of a with grey cement and pigment any shape and size confirming to IS15658-2006 of 80mm thickness M-40 Gde complete all as specified and directed.
M&L sand filling under floors including watering and consolidation, complete all as specified and directed.
M&L cement concrete type B-1, 1:2:4 using 20mm graded crushed stone aggregate as in kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
Taking down chowkhats or frames with shutters n.exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frames with shutters exc 1.5 sqm but n.exc 4sqm each (without taking off shutters from the frame) complete all as specified and directed.
Taking down shutters exc 1sqm but not exc 2 sqm each complete all as specified and directed.
S&F framed work rolled mild steel as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified and directed
S&F steel windows with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing/gauging bars, dovetailed or welded.complete all as specified and as directed.
Refixing door shutters of any description exceeding 1 square metre and not exceeding 2 square metre each including easing, adjusting as required and renewal of screws complete all as specified and directed.
S&F mild steel bars as in window guard bars welded to steel window frame or fixed to wooden frame complete all as specified and directed.
S&F 30mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc, complete all as specified and directed.
S&F 30mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F 35mm thick 2nd class hardwood plain framed panelled shutters (two panel ) with lock rail and panels of 9mm CWR plywood. The size of rail and stile as per IS 1003 (Qart I), klin seasoned and chemically pressure treated complete all as specified and directed.
S&F door closer hydraulically regulated,of aluminium(Die cast) body universal type suitable for door shutters 851 to 1000mmin width and weight between 38 to 60kg of Hydraulic door closer complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.
S&F 150mm long aluminium barrel tower bolt complete all as specified and directed.
S&F 100mm long aluminium handle , cost type anodised ,complete to fix complete all as specified and directed.
S&F 300mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismentled portion in CM 1:3 or cement concrete 1:2:4 type B-I as required, exc half brick but not exc one brick wall complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing the serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 450 x 300 x 7mm thick as on vertical surface such as dado, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick in cement mortar 1:4 complete all as directed and specified
M&L non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, over and including 15mm thick screed bedding layer of mortar in CM 1:6 for laying floor finish complete all as specified and directed.
M&L non skid coloured ceramic tiles 7 to 8mm thick (square /rectangular) area in vertical surface as skirting/dado of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor, and including 10mm thick cement plaster in cement mortar 1:4 complete all as directed and specified
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)
S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F PVC (SWR) bends of 110mm radius complete all specified and directed.
S&F mild steel butt hinges medium weight cold rolled MS, size 100mm complete all as specified and directed.
S&F 150mm long mild steel barrel tower bolts, stove enamellled black, with bright bolt and fixed complete all as specified and directed.
S&F 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.
S&F 300mm long mild steel sliding door bolts plate type, store enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F in repairs galvanised stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed
M&L for preparation of old surfaces by complete removal of existing treatment & levelling of wall surface and applying two coats of Oil Bound Distemper over a coat of primer over 3mm thick wall care putty on surface of wall. complete all as specified and as directed.
M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing , scraping down smoke soot , moulds, moss, efflorescent salts , trading oil and greasy spots complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper including preparation of old surfaces by brooming down or steel wire brushing, scraping down smoke soot , moulds, filling gaps with wall care putty, complete all as specified and directed.
M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke soot and efflorescent salts etc and applying one coat of white wash on walls complete all as specified and directed.
M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down, scrapping down smoke and efflorescent etc. complete and applying one coat of white wash complete all as specified and directed.
M&L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of old wooden surfaces of any description over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of old steel surfaces of any description over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and direcred.
M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of grade Fe-410 W (Gde-E250 quality - B) complete all as specified and directed.
S&F steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 complete all as specified and direcred.
S&F mild steel screw bolts ( machine made) ( Diameter of neck 16 to 20mm ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut ,exc 22.5cm and n exc 30cm long complete all as specified and direcred.
M&L for mild steel Plates, plain or chequered, of any thickness as in gusset plate , cover plate etc in thickness in available sizes for Gde-Fe-410-W Gde-E-250 qulaity B complete all as specified and direcred.
Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new steel & iron surfaces of any description n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
Dismantaling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.
Dismantling asbestos cement (corrugated, semicorrugated etc) sheet as in roof coverings including ridges, valley gutters etc complete all as directed and specified.
S&F 6mm thick AC corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts and washers as in roof complete all as specified and specified.
S&F 6mm thick Asbestos cement two piece serrated ridge , suitable for corrugated or semi corrugated sheet complete all as specified and specified.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, ridges, velly gutters fixed with self tapping screws complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft / loose soil complete all as specified and directed.
M&L for cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in filling and mass concrete complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed.
M&L for hard core of gauge n.exc. 63mm of broken stone, and leveled in layers n.exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.
M&L for PCC 100mm thick , 1:4:8 type D-2, using 40mm graded stone aggregate as in sub base complete all as specified and as directed.
M&L in repair for Ultra design coloured tiles with PU coating of size 300 x 300 x 25mm thick rubber moulded with white cement, as in floors incl over 15mm thick screed bed in CM 1:6 jointed and pointed in neat cement slurry all as directed.
Supply only liquid integral water proofing compound complete all as specified and directed.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the staring point in soft/loose soil complete all as specified and directed.
M&L for machine cut kota stone 20-25 mm thick over and including 15mm thick cement screed base in CM 1:4 laid and jointing with 3kg neat cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
All are per the description of Srl item No 81 above but kota stone 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM 1:3.
M&L for mild steel work for wind ties as in roofs including securing bolts and similar work quality conforming to Fe-290 Gde E-165 complete all as specified and directed.
M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L mild steel plain black sheet (1.25mm thick) as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
S&F in repairs 2mm thick fibre glass reinforced translucent plain/corrugated sheeting with two corrugation side lape fixed L type or J type or cranked hook bolts and washers in roof complete all as specified and directed.
S&F GI powder coated frame work of size 605 x 605 mm, for celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre , hanging with 6 mm dia GI Hanger , complete all as specified and as directed.
M&L 4mm thick non asbestos fibre cement building boards fixed or laid / inserted to timber/ GI / Aluminiumframe work with screws complete all as per manufacturers instructions and as directed.
M&L prepartion of new surfaces of ceiling and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and applying two or more coats on new work, complete all as specified and directed.
S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent and fixing at site on PVC frame complete all as specified and directed.
M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
E/M Portion:- Taking down carefully copper/ aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.
Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, sheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, sheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall on wall including sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc complete all as specified and directed for One light / bell / buzzer point controlled by one, one way switch 06 Amps complete all as specified and directed.
All as per the description of srl item No 93 above but one fan point controlled by one, one way switch 06 Amps.
All as per the description of srl item No 93 above but one 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch.
All as per the description of srl item No 93 above but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.
All as per the description of srl item No 93 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.
Supply & fixing switch piano flush type, 06 Amps, single pole, one way, 250 volts complete all as specified & directed.
Supply & fixing switch piano flush type, 16 Amps, single pole, one way, 250 volts with switch frame complete all as specified & directed.
Supply & fixing socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 250 volts with socket frame complete all as specified & directed.
Supply & fixing socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 250 volts with socket frame complete all as specified & directed.
Supply and fixing ceiling rose, 6 Amps, 250 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified & directed.
Supply and fixing tube light fitting and supply and fixing on surface and wall mounted LED batten with polycarbonate housing and initigarated electronic drive 20 Watt fixture 4 feet provided for efficient heat dissipation with policorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as specified and directed.
Taking down exiting unserviceable security light fitting and supply and fixing energy saving security light fitting of 45 watts LED Versatile pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired includingh connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.
Taking down of existing unserviceable highbay lights and supply and fixing energy saving flood light 100 watts LED 5700K die-cast aluminium IP 66 flood light with high power LEDs as light source, comprising with electronic driver and all accessories complete, arrangements for mounting of fitting i.e. bracket, clamps, nuts, bolts and washers etc all as per site requirement including connecting up with provision of PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections complete all as specified and directed.
Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified and directed.
All as per the description of srl item No 106 here-in-before but submain wiring 1.5 sqmm nominal cross sectional area, two single core .
Supply and fixing sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.
Supply and fixing sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed.
Supply and fixing MCB, SP, AC, 240 volts of 40 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified and directed.
Supply and fixing MCB, SPN, AC, 240 volts of 63 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified and directed.
Supply, installation, testing and commissioning in replacement of factory made tested LT panel board of cubical double door compartment outdoor type leg mounted suitable for , 415 volts 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with insulated copper bus bar of rating not less than 1.5 times of Incomer/ Outgoings MCCBs, installed on proceline/ SMC insulator. The panel shall be dust and vermin proof IP -65 class protection and made of 3.15 mm CRCA MS sheet and inner compartment 2.0mm, 40X40X6mm thick MS angle iron frame work, fixing of double doors shall be on MS hinges with anti-theft provision (the door can’t be removed from enclosure without cutting enclosure), powder coated finished over one coat of red oxide on out side surface and painted in side with two coats of red oxide primer and rear opening type with apran for cable entry closing locking arrangement including internal wiring with PVC insulated multisranded copper conductor FRLS cable IS 694 marked, 1100 volts grade of appropriate size (but not less than 2.5 sqmm) and comprising of the following including necessary brick work for platform of suitable size:-
Note for item No 1.0 :- (i) The outgoing MCBs should be connected with main bus bar with 16 sqmm multistranded copper conductor with copper lugs. (ii) Incoming cable shall be connected through suitable size glands & Lugs. (iii) The feeder piller/panel should have louvers for natural flow of air. (iv) MCCB should have barrier. Danger plate should be fixed on both side of the panel. (v) Construction of foundation & taking out of the old connected cables and reconnection of the same with new thimbles, gland of suitable size are deemed to be included in the above quoted rate.
Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and exceedidng 1.5 mtr depth for laying of LT UG cable and getting out complete all as specified and directed .
Returning, filling in, trenches with soft/ loose soil including spreading levelling watering and well ramming in layers not exc 25 cm with excavated soil complete all as directed.
Removing surplus spoil to a distance not exc 50 mtr away and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified.
Sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed.
Sub class ‘B bricks, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and as directed
M&L tubing GI light grade laying for protection of LT under ground cable of size 40mm bore complete all as specified & directed.
Supply and laying including connecting and testing of LT under ground electric cable of size 10 sqmm 2 core XLPE insulated and PVC sheathed armoured heavy duty multi stranded 1100 Volts grade with aluminium conductor, laid in trenches or drawn through existing pipe or fixed to wall with providing suitable size of aluminium lugs, GI nuts bolts and washers complete wherever required all complete all as specified and directed .
Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cm x 60cm x 6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed. Note:- On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.
DEEP ASSOCIATES
SAI SARTHI ENGINEERING & CONSTRUCTION CO.
M/S GR construction compony
SHREE RAM BUILD TECH
The new hut furnitures
S GOURAV PRAKASH ENTERPRISES
QUALITY CONSTRUCTIONS CO
MOHIT ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .